Answer:
0
Explanation:
It has no charge.
Salicylic acid is insoluble in water because it is a non-polar covalent compound.
For this reason it is a poor conductor of electricity as it has no free moving ions that would act as charge carriers.
But on the other hand salicylate which is a conjugate base of salicylic acid has a charge of -1 and can be written as C7H5O3-.
hopefully this makes sense
:)
1. Distinguish between a mixture and a pure substance.
Answer:
1)Mixture is the combination of substance
2)There are two types of mixture such as heterogeneous mixture and homogeneous mixture
3)foreg=Salt solution ,sedimentation
Pure substance
1)Pure substances are also called elements
2)They are made up of small atoms
3)for eg= oxygen,Venadium ,Iron,Oxygen
What is the Molality of a solution prepared by dissolving 84.7 g of KMnO4 (potassium permanganate, an oxidizing agent) in 165 g of water?
a) 0.513 m
b) 11.3 m
c) 0.308 m
d) 3.25 m
e) 0.958 m
Arrange the following aqueous solutions in order of increasing boiling points.
0.050 m Mg(NO 3) 2; 0.100 m ethanol; 0.090 m NaCl
a. Mg(NO3) < NaCl < ethanol
b. ethanol < Mg(NO3)2 < NaCl
c. ethanol < NaCl < Mg(NO3)2
d. NaCl < ethanol < Mg(NO3)2
e. Mg(NO3)2 < ethanol < NaCl
Answer:
The correct choice is option b. ethanol < Mg(NO3)2 < NaCl
Explanation:
Ethanol = 0.100 m
Mg(NO3)2 = 0.15 m
NaCl = 0.18 m
The molar concentration of NaCl is the highest, which is why its boiling point will be the highest, too.
13. Find the total number of atoms present in the following molecules.
a. 5 H₂O
b. Zn Cl₂
Answer:
zxcdfzdg
Explanation:
zszghzd
2. State a common metric unit and symbol obtained from each of the following instruments.
(a) metric ruler
(b) balance
(c) graduated cylinder
(d) thermometer
Answer:
cm
Explanation:
for short measurements
Answer
Choice A
Answer
Choice B
Answer
Choice C
Question
A scientist hypothesizes that a new medication can reduce
the chances of catching a cold Which of these would most
likely be the dependent variable in a study involving this
medication?
//
The participants
who do not receive
the medication
Color PURPLE
The number of
participants who
catch a cold
Color YELLOW
The age of the
participants
Color GRAY
Tt remains the
T+ is purposely
It is used for
Answer:
what is the question????
Which of the following are considered elements:
Answer:
considered as element
Helium He
6. How many meters are in 0.00253 kilometers?
Answer:
2.53 kilometers
A cylinder fitted with a movable piston and filled with a gas has a volume of 188.5mL at 26.7 °C when the applied pressure is 755.2 torr. The temperature of the oil bath surrounding the cylinder was increased to 165.2 °C, and the load on the piston was changed. Careful measurement now gave a value of 210.5mL for the volume. What was the final pressure in the system, in torr? Select one:
O a. 715.5 tor O b. 576.9 torr Oc. 988 6 torr O d. 1233 torr 462.6 tor
Answer:
C
Explanation:
To find the new pressure, we will use this formula: P₁V₁/T₁ = P₂V₂/T₂
P₁ = Original pressure (755.2)
V₁ = Original volume (188.5)
T₁ = Original temperature in kelvins (26.7 + 273.15 = 299.85)
P₂ = Final Volume (?)
V₂ = Final volume (210.5)
T₂ = Final temperature in kelvins (165.2 + 273.15 = 438.35)
Here is our equation
(755.2)(188.5)/(299.85) = (210.5)P₂/(438.35)
Hopefully, you have a calculator handy because this equation will end up looking like this:
474.75471 = (0.48021)P₂
Divide both sides by the coefficient
474.75471/0.48021 = (0.48021)P₂/0.48021
P₂ = 988.64
When you wash your hands or dishes, you probably don't use just water. In 5-7 sentences, explain what
you use to help you wash up, how it works, and why you think it works.
Hello! here is a paragraph you can use, that I type up to explain, make sure to not copy word for word of what I said. :)
What I use to wash up is soap. Soap has a certain ph level and includes acids and alkaline that enables water to mix and create soap foam to clean. Soap can come in many shapes and sizes, and can be either liquid, solid, or even foamy. I think soap works because when you use friction between your wet hands and the soap bar, you are rubbing the substances of the soap that clean your hands to clean your hands. I think the friction of the rubbing creates a layer of soap that can be used to clean, and when you increase friction the more change of the soap.
Have a great day,
I hope this helps!
A popular car has a gas tank that holds a maximum of 14.5 gallons of fuel. What is
the size of the tank in liters ?
Answer:
54.883, so rougly about 54.9 liters.
Explanation:
To convert gallons to liters, multiply the amount of gallons by 3.785.
14.5 * 3.785 = 54.883
Taking into account the change of units, the size of the tank is 54.88 liters.
In first place, the rule of three is a tool used to quickly solve problems involving a proportional relationship between two variables.
The rule of three is a way of solving problems of proportionality between three known values and an unknown value, establishing a relationship of proportionality between all of them.
If the relationship between the magnitudes is direct, that is, when one magnitude increases, so does the other (or when one magnitude decreases, so does the other), the direct rule of three should be applied.
The rule of three is applied as follows, with A, B and C being known values and D being an unknown value: if A maintains a certain relationship with B, and it is known that C and D have the same relationship, it is possible to calculate the unknown value D using the following expression:
[tex]D=\frac{CxB}{A}[/tex]
In this case, the rule of three can be applied as follows: if 1 gallon is equal to 3.785 liters, 14.5 gallons are equal to how many liters?
[tex]D=\frac{14.5 gallonsx3.785 liters}{1 gallon}[/tex]
Solving:
D= 54.88 liters
In summary, the size of the tank is 54.88 liters.
Learn more with this example:
https://brainly.com/question/17839792?referrer=searchResultshttps://brainly.com/question/14586541?referrer=searchResultsAmmonium carbonate solution is added to dilute nitric acid. What is the balanced chemical equation?
Solid calcium oxide and gaseous water are produced by the decomposition of solid calcium oxide hydroxide. Write a balanced chemical equation for this reaction.
[tex]\boxed{\sf {Ca(OH)_2(s)\atop Calcium\:Hydroxide}\longrightarrow {CaO(s)\atop Calcium\;oxide}+{H_2O(g)\atop water}}[/tex]
On reactant side
Hydrogen= 2atomsOxygen=2atomsCalcium=1atomOn product side
Hydrogen=Oxygen=2atomsCalcium=1atom.hence balanced.
13. Find the total number of atoms present in the following molecules. a. 5 H₂O b. Zn Cl₂
Answer:
A= 15 atoms B= 3
Explanation:
5 x 2 + 5 x 1
3 + 2 x 1
Which one of the following is NOT the unit of wave number:
m-1
cm-1
mm-1
cm
Answer:
e
Explanation:
cm is not the unit of wave number out of the following.
What is a wave number?Definition: Total number of wave cycles present in a unit distance is termed a wave number.
Wave number is always a reciprocal of the unit of distance.Wave number is denoted by the letter 'k'.The formula for wave number is 2π/λ where λ is the wavelength. Since wave number is always reciprocal, cm is not the unit for a wave number. The higher the wave number, the higher the frequency and energy.To learn more about wave number, refer to:
https://brainly.com/question/8304265
#SPJ2
Which term best describes the important pieces of information that scientists gather and record during an experiment?
conclusions
data
research
supplies
Answer:
conclusions i think i am not confirmed
Answer:
b-data
Explanation:
right on the unit test review on edge
brainliest???
What is an atomic number
Answer:
the number of protons is called the atomic number
hope it helps you buddy
Answer: number of protons in an atom
Explanation:
how many grams are in one mole of CH3CO2H ?
Answer: 60.2g
Explanation:
One mole acetic acid weighs 60.2g
Classify these compounds as acid, base, salt, or other. Drag the appropriate items to their respective bins.
HCOOH, CH3OH, NaOH, HNO3, NaBr, NH3, CO2, KCl
HCOOH is an acid, KCL is a Salt, NaOH is a base.
Acids Bases and SaltsAn acid is defined as a substance which when dissolved in water produces hydronium ion (H3O+), neutralizes bases, tastes sour and turns blue litmus red.
Acids incldes:
HCOOH-weak acidHNO3-Strong acidA Base is a substance which in its aqueous solution produces hydroxyl ions (OH–), neutralizes acids , tastes bitter and turns red litmus blue
Bases incldes:
NaOHNH3A Salt is an ionic compound produced from the neutralization reaction of acids and bases. it is neutral substance and has no effect on litmus.
NaBrKCLThe folloing can be classifed as other or in aqueous solution as :
CO2-acidic oxide, Bronsted lewis acid CH3OH -Bronsted-Lowry acidLearn more on acids base and salts here:https://brainly.com/question/2927542
Using the ruler, what is the value of A considering significant
figures?
Answer:
13.7 cm
Explanation:
If the number is between two whole numbers then that means it is going to be a decimal, how to determine the decimal is by how many ticks/lines are between it, so if you count from 13 cm and count each line as 1 you get to the number 7 and since that number is between the whole number it becomes 13.7
An unknown compound has the following chemical formula: where stands for a whole number. Measurements also show that a certain sample of the unknown compound contains of magnesium and of chlorine. Write the complete chemical formula for the unknown compound.
Answer: This is only a guess: The "following chemical formula: " doesn't appear on my screen. But since you mentioned Mg and Cl, I would guess MgCl2
Explanation: Mr loses 2 electrons while each Cl gains one each: Two chlorines for every 1 magnesium.
what's the basic oxide
Answer:
Basic oxides are oxides that show basic properties in opposition to acidic oxides and that either react with water to form a base; or react with an acid to form a salt and water which are called neutralization reactions.
Explanation:
Mark me as brainiliest
Explanation:
A basic oxide is an oxide that shows basic properties in opposition to acidic oxides and that either ⁕reacts with water to form a base; or ⁕reacts with an acid to form a salt.
89. The element bromine at room temperature is a liquid with a
density of 3.12 g/mL. Calculate the mass of 125 mL of bro-
mine. What volume does 85.0 g of bromine occupy?
The mass of 125 mL of bromine and the volume occupied by 85 g of bromine are:
1. The mass of bromine is 390 g. 2. The volume of bromine is 27.24 mL.Density is simply defined as the mass of an object per unit volume of the object. It can be expressed mathematically as
[tex]Density = \frac{mass}{volume }[/tex]
1. Determination of the mass of bromineDensity = 3.12 g/mL
Volume = 125 mL
Mass =?[tex]Density = \frac{mass}{volume} \\\\3.12 = \frac{mass}{125}[/tex]
Cross multiply
Mass = 3.12 × 125
Mass = 390 gTherefore, the mass of bromine is 390 g
2. Determination of the volume of bromineDensity = 3.12 g/mL
Mass = 85 g
Volume =?[tex]Density = \frac{mass}{volume } \\\\3.12 = \frac{85}{volume }[/tex]
Cross multiply
3.12 × Volume = 85
Divide both side by 3.12
[tex]Volume = \frac{85}{3.12}\\\\[/tex]
Volume = 27.24 mLTherefore, the Volume of bromine is 27.24 mL
Learn more: https://brainly.com/question/24460125
Hehe someone help I have put down heat but I think there is another
Answer:
chemical potential enery
Mark brainliest
20,000 $ give a way but answer this first
Plz
12.Write the basis of naming of the following elements. 1.Neptunium,2.Mendelevium,
Answer:juhygjdkeExplanation:
Mendelevium is named for Dmitri Mendeleev who produced one of the first periodic tables.
Abelson first found neptunium in 1940 after uranium had been bombarded by neutrons from the cyclotron at Berkeley, California. ... The element was named after the planet Neptune, which is the first planet beyond Uranus.
Answer in explanation
Explanation:
neptunium was named after the discovery of the planet neptune in september 23 1846
mendelevium was named as dimitri mendeleev
As discussed during the lecture, the enzyme HIV-1 reverse transcriptae (HIV-RT) plays a significant role for the HIV virus and is an important drug target. Assume a concentration [E] of 2.00 µM (i.e. 2.00 x 10-6 mol/l) for HIV-RT. Two potential drug molecules, D1 and D2, were identified, which form stable complexes with the HIV-RT.
The dissociation constant of the complex ED1 formed by HIV-RT and the drug D1 is 1.00 nM (i.e. 1.00 x 10-9 mol/l). The dissociation constant of the complex ED2 formed by HIV-RT and the drug D2 is 100 nM (i.e. 1.00 x 10-7 mol/l).
1. Compute the total concentration of [D1]tot that is needed to bind 90% of the HIV-RT at the given concentration [E]tot. Provide your answer as a numerical expression with 3 significant figures in the unit mol/l. You do NOT have to consider competition betwwen the drugs D1 and D2! They are administered separately.
2. Compute the total concentration of [D2]tot that is needed to bind 90% of the HIV-RT at the given concentration [E]tot. Provide your answer as a numerical expression with 3 significant figures in the unit mol/l.You do NOT have to consider competition betwwen the drugs D1 and D2! They are administered separately.
Answer:
C)[D]/[ED] = 5.20
D)[D]/[ED] = 5.20
E)[D']_T = 1.495* 10 ^-7 M
F)[D'] / [ED'] = 0.0579
Explanation:
E = 250 nM =2.5* 10 ^-7 mol/L , T=298.15 K
Dissociation constant of K_D = 1.3 μM (1.3 *10 ^-6 M)
E + D ⇄ ED → K_a = [ED] / [D][E] (association constant)
ED ⇄ E + D → K_D = [E][D] / [ED] (dissociation constant)
C)
[E] =2.5*10^-7 mol/L
K_D = 1.3* 10^-6 M
K_D = [E][D] / [ED] → [D]/[ED] = K_D / [E]
= [D]/[ED] = 1.3* 10 ^-6 / 2.5 *10^-7
= 13/25 * 10
=130/25 = 5.20
[D]/[ED] = 5.20
D)
ΔG =RTln Kd
ΔG_2 for E and D = 1.987 * 298.15 * ln 1.3*10^-6
ΔG_2 592.454 * [ln 1.3 +ln 10^-6]
ΔG_1 = 592.424 [0.2623 - 13.8155]
ΔG_2 = -592.424 * 13.553
ΔG_1 = -8184.633 cal/ mol
ΔG_1 = -8184.633 * 4.18 J/mol = -34244.508 J?mol
ΔG_1 = -34.245 KL/mol
so, ΔG_2 = ΔG_1 - 10.5 KJ/mol
ΔG_2 = -34.245 - 10.5
ΔG_2 = -44.745KJ / mol
ΔG_2 =RT ln K_D
-44.745 *10^3
=8.314 *298.15 lnK_D
lnK_D' = - 44745 / 2478.81 g
ln K_D' = -18.051
K_D' = -18.051
K_D' = e^-18.051
[D]/[ED] = 5.20
E)
[E] = 2.5* 10 ^-7 mol/ L = a
K_D' = [E][D] / [ED'] E +D' → ED'
K_D' = a/2(x-(a/2) / (a/2)
KD' = x - a/2
=2.447 *10^-8 = (2.5/2) * 10^-7
x=2.447 * 10^-8 + 1.25 * 10^-7
x = 2.447 *10^-8 + 1.25 * 10 ^-7
x= 10^-7 [1.25 + 0.2447]
x = 1.4947 * 10^-7
[D']_T = 1.495* 10 ^-7 M
F)
K_D' = [E][D'] / [ED']
[D'] / [ED'] = KD' / [E]
[D'] / [ED'] = 1.447 *10^-8 / 2.5* 10^-7
[D'] / [ED'] = 0.5788 * 10^-1
[D'] / [ED'] = 0.0579
Explanation:
...
A student performs an experiment to determine the molar mass of magnesium oxide. The student repeats the experiment five times and collects the following data: 40.220gmol, 40.654gmol, 40.314gmol, 40.165gmol, and 40.554gmol. What is the relative standard deviation (RSD) for this set of data?
The relative standard deviation for the set of data obtained by the student is 0.470%
The formula for calculating the relative standard deviation is given below as:
Relative standard deviation (RSD) = (S * 100)/x
where S stands for the standard deviation and x is the mean of the data set.
The following are the steps to calculate to determine the relative standard deviation using the given formula:
Step 1: Calculate the mean of the numbers in the data set.
mean, x = sum of numbers / number of numbers
(40.220 + 40.654 + 40.314 + 40.165 + 40.554)/5
mean = 40.381 g/mol
Step 2: Subtract the mean from each number in the data to determine the deviation for each number and then square the deviations.
(40.220 - 40.381)² = 0.0259
(40.654 - 40.381)² = 0.0745
(40.314 - 40.381)² = 0.00449
(40.165 - 40.381)² = 0.0466
(40.554 -40.381)² = 0.0299
Step 3: Sum the squared deviations.
0.0259 + 0.0745 + 0.00449 + 0.0466 + 0.0299 = 0.181
Step 4: Determine the variance by dividing the sum of the squared deviations by the total number of values.
Variance = 0.181/5 = 0.0362
Step 6: Determine the standard deviation of the data by taking square root of the variance.
Standard deviation, S = √0.0362 = 0.190
Step 7: Determine the relative standard deviation by inserting the values in the formula, (RSD) = (S * 100)/x
RSD = (0.190 * 100)/40.381
RSD = 0.470%
Learn more at: https://brainly.com/question/475676
What is true of an element that is oxidized?
It increased in electronegativity.
It decreased in electronegativity.
It gained electrons.
It lost electrons.
Answer:
When an element is oxidized, it loses electrons
Answer:
The last option is the correct answer.
Explanation:
When an element is oxidized, it loses electrons. But when an element is reduced, it gains electrons. This is the basis of redox reactions.
However, an oxidizing agent oxidizes something else, and gets reduced, therefore gaining electrons. Meanwhile, a reducing agent reduces something else, and gets oxidized in the process, losing its own electrons.
An unknown element is a mixture of isotopes ¹²⁹X and ¹³²X. The average atomic mass of X is 131.01 amu. What is the percent abundance of ¹³²X?
Answer: 67%
Explanation: The weighted averages of the two isotopes must add to 131.01. Let Y be the percentage of isotope 129. Then (1-Y) will be the percentage of isotope 132. The weighted average of each is:
129: 129Y
132: 132(1-Y)
Their sum is equal to 131.01
129Y + 132(1-Y) = 131.01
Y = 0.33, or 33%
(1-Y) = 0.67, or 67%
Check: 129*(0.33) = 42.57
132*(0.67) = 88.44
Sum = 131.01 It checks OK The 132 isotopes is 67% of the sample.
Considering the definition of atomic mass, isotopes and atomic mass of an element, the percent abundance of ¹³²X is 67%.
Definition of atomic massFirst of all, the atomic mass (A) is obtained by adding the number of protons and neutrons in a given nucleus of a chemical element.
Definition of isotopeThe same chemical element can be made up of different atoms, that is, their atomic numbers are the same, but the number of neutrons is different. These atoms are called isotopes of the element.
Definition of atomic massOn the other hand, the atomic mass of an element is the weighted average mass of its natural isotopes. In other words, the atomic masses of chemical elements are usually calculated as the weighted average of the masses of the different isotopes of each element, taking into account the relative abundance of each of them.
Percent abundance of ¹³²XIn this case, you know:
An isotope has an atomic mass of 132 amu and a percent natural abundance of y.An isotope has an atomic mass of 129 amu and a percent natural abundance of 1-y. The average atomic mass of X is 131.01 amuThen, the average mass of X can be calculated as:
132 amu×y + 129 amu×( 1-y)= 131.01 amu
Solving, you can find the percent abundance of ¹³²X:
132 amu×y + 129 amu×1 - 129 amu×y= 131.01 amu
132 amu×y + 129 amu - 129 amu×y= 131.01 amu
132 amu×y - 129 amu×y= 131.01 amu - 129 amu
3 amu×y= 2.01 amu
y= 2.01 amu÷ 3 amu
y= 0.67= 67%
Finally, the percent abundance of ¹³²X is 67%.
Learn more about average atomic mass:
brainly.com/question/4923781?referrer=searchResults
brainly.com/question/1826476?referrer=searchResults
brainly.com/question/15230683?referrer=searchResults
brainly.com/question/7955048?referrer=searchResults
This picture shows students working in a
chemistry laboratory. What could they do to make
their lab safer?
Label the test tubes and plastic cups.
Move the fire extinguisher closer to their
table.
Wear chemical protective gloves.
Reduce the clutter on the table.
Stand at the table instead of sitting. Tie long hair back.
DONE
Answer:
yes it is true they apply necessary safety measures
Answer: Label the test tubes, wear chemical protective gloves, tie long hair back
Explanation:
Just got it wrong
