Answer:
b. The anion affects the color of the solution more than the intensity of the color.
Explanation:
An ionic compound is one that is made up of ions held together by electrostatic forces. The ions are made up of positively charged ions known as cations and negatively charged ions known as anions. In compounds with a high ionic attribute, anions produce colorless compounds. But compounds that have less ionic attributes produce deeper colors like black and red. When in solutions, ionic compounds take on color and this is because of the anion that absorbs infrared light energy.
The data shows the number of years that 30 employees worked for an insurance company before retirement. is the population mean for the number of years worked, and % of the employees worked for the company for at least 10 years. (Round off your answers to the nearest integer.)
Answer:
14
73%
Explanation:
The mean Number of years worked :
. (sum of service years) / employees in the
(8+13+15+3+13+28+4+12+4+26+29+3+10+3+17+13+15+15+23+13+12+1+14+14+17+16+7+27+18+24) /
(417 / 30)
= 13.9 years
= 14 years
The percentage of employees who have worked for atleast 10 years :
Number of employees with service years ≥ 10 years = 22 employees
Total number of employees
Percentage (%) = (22 / 30= * 100% = 0.7333 * 100% = 73.33% = 73%
what is the mass of insoluble calcium phosphate produced from .555 grams of calcium chloride
Answer:
0.518 g
Explanation:
Step 1: Write the balanced equation
3 CaCl₂ + 2 H₃PO₄ ⇒ Ca₃(PO₄)₂ + 6 HCl
Step 2: Calculate the moles corresponding to 0.555 g of CaCl₂
The molar mass of CaCl₂ is 110.98 g/mol.
0.555 g × 1 mol/110.98 g = 5.00 × 10⁻³ mol
Step 3: Calculate the moles of Ca₃(PO₄)₂ produced
5.00 × 10⁻³ mol CaCl₂ × 1 mol Ca₃(PO₄)₂/3 mol CaCl₂ = 1.67 × 10⁻³ mol Ca₃(PO₄)₂
Step 4: Calculate the mass corresponding to 1.67 × 10⁻³ moles of Ca₃(PO₄)₂
The molar mass of Ca₃(PO₄)₂ is 310.18 g/mol.
1.67 × 10⁻³ mol × 310.18 g/mol = 0.518 g
14 protons,14 electrons and 14 neutrons
the answer is silicon!!
What is different between margerine and butter in term of organic chemistry
Answer:
The most important difference between the two is that butter is derived from dairy and is rich in saturated fats, whereas margarine is made from plant oils. ... If the margarine contains partially hydrogenated oils, it will contain trans fat, even if the label claims that it has 0 g.
Explanation:
(⌒_⌒;)
Please help me ASAP I’ll mark Brainly
Answer:
1. Vacuole
2. chloroplast
3. Nucleus
4. Plasma membrane - cell membrane
5. Vacuole (same as #1 ?) could be vesicle
Explanation:
A solution of hydrochloric acid had a hydrogen ion concentration of 1.0 mol/dm3
Water was added to hydrochloric acid until the ph increased by 1
What was the hydrogen ion concentration of the hydrochloric acid after had been added?
Answer:
pH = -log[H+]
Where [H+] = Hydrogen ion concentration
In this case,
[H+] = 1 × 10^(-2) = 10^(-2)
log{10^(-2)} = -2
-log{10^(-2)} = -(-2) = 2
pH = -log{10^(-2)} = 2
and hi.!!!
Answer:
0.1
Explanation:
Hydrogen ion concentration can be calculated using the formula [H+] = 10^-pH
pH can be concentrated using ph = -log[H+]
let's calculate the initial pH before anything was added: pH = -log(1) = 0
it increased by 1 so the final pH is 1.
Now we'll find the [H+] of a solution with a pH of 1:
concentration = 10^(-1) = 0.1
According to the Arrhenius equation, changing which factors will affect the
rate constant?
A. Temperature and the ideal gas constant
B. The activation energy and the constant A
C. The constant A and the temperature
D. Temperature and activation energy
Answer:
e−(Ea/RT): the fraction of the molecules present in a gas which have energies equal to or in excess of activation energy at a particular temperature
Answer:
D. Temperature and activation energy is the correct answer
Explanation:
^_^
What does the term spontaneous mean in chemical reactions?
A. Producing heat as a product
B. Occurring without added energy
C. Occurring only at high temperatures
D. Occurring in an aqueous solution
Answer:
B
Explanation:
Spontaneous in chemical reactions means without any external input.
Occurring without added energy. Hence, option B is correct.
What is a spontaneous reaction?A spontaneous reaction is a reaction that supports the formation of products under the conditions under which the reaction is happening.
Spontaneous Reaction- a reaction that favours the formation of products at the conditions under which the reaction is occurring.
A non-spontaneous reaction can be made spontaneous if it is inside a controlled environment, this is what happens in nuclear power plants that create atomic fusion and fission in chambers that are controlled to control different particles to create nuclear active rays.
Hence, option B is correct.
Learn more about the spontaneous reaction here:
brainly.com/question/23142328
#SPJ5
1 or 2 topics or two lessons should be explained in an illustrated childrens book minimum of 10 pages must have 3 or more sentences
Answer:
Yes because same topic are long
A buffer is prepared containing 0.75 M NH3 and 0.20 M NH4 . Calculate the pH of the buffer using the Kb for NH3. g
Answer:
pH=8.676
Explanation:
Given:
0.75 M [tex]NH_{3}[/tex]
0.20 M [tex]NH_{4}[/tex]
The objective is to calculate the pH of the buffer using the kb for [tex]NH_3[/tex]
Formula used:
[tex]pOH=pka+log\frac{[salt]}{[base]}\\[/tex]
pH=14-pOH
Solution:
On substituting salt=0.75 and base=0.20 in the formula
[tex]pOH=-log(1.77*10^{-5})+log\frac{0.75}{0.20}\\ =4.75+0.5740\\ =5.324[/tex]
pH=14-pOH
On substituting the pOH value in the above expression,
pH=14-5.324
Therefore,
pH=8.676
Calculate the moment of inertia of a CH³⁵CL₃ molecule around a rotational axis that contains the C-H bond. The C-Cl bond length is 177pm and the HCCl angle is 107⁰f
Answer:
The correct answer is "[tex]4.991\times 10^{-45} \ kg.m^2[/tex]".
Explanation:
According to the question,
[tex]R_{C-Cl} = 177 \ pm[/tex]
or,
[tex]=1.77\times 10^{-10} \ m[/tex]
[tex]\alpha = 107^{\circ}[/tex]
[tex]m_{Cl}=34.97 \ m.u[/tex]
or,
[tex]=34.97\times 1.66\times 10^{-27}[/tex]
[tex]=5.807\times 10^{-26} \ kg[/tex]
The moment of inertia around the rotational axis will be:
⇒ [tex]I=3\times m_{Cl}\times (R_{C-Cl})^2 \ Sin^2 \alpha[/tex]
By putting the values, we get
[tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2 \ Sin^2 (107)[/tex]
[tex]=3\times 5.807\times 10^{-26}\times (1.77\times 10^{-10})^2\times 0.91452[/tex]
[tex]=4.991\times 10^{-45} \ kg.m^2[/tex]
The tools shown in the diagram are used for gardening Each tool is made up
of two levers that are attached to each other. The handles are the input arms,
and the cutting blades are the output armo
Hand shears
Lopper
Which tool has a greater mechanical advantage, and why?
A. The lopper, because the input work is the same as the output work
B. The hand shears, because their shorter handles transfer force
more quickly to the cutting blade
C. The hand shears, because you can apply less total force to the
handles with one hand
D. The lopper, because its longer handles can produce more output
force with less input force
Answer:
D
Explanation:
The longer handles distribute the force across a longer distance.
How many molecules in each sample?
64.7 g N2
83 g CCl4
19 g C6H12O6
Answer:
1.39x10²⁴ molecules N₂.25x10²³ molecules CCl₄6.38x10²² molecules C₆H₁₂O₆Explanation:
First we convert the given masses into moles, using the compounds' respective molar mass:
64.7 g N₂ ÷ 28 g/mol = 2.31 mol N₂83 g CCl₄ ÷ 153.82 g/mol = 0.540 mol CCl₄19 g C₆H₁₂O₆ ÷ 180 g/mol = 0.106 mol C₆H₁₂O₆Then we multiply each amount by Avogadro's number, to calculate the number of molecules:
2.31 mol N₂ * 6.023x10²³ molecules/mol = 1.39x10²⁴ molecules0.540 mol CCl₄ * 6.023x10²³ molecules/mol = 3.25x10²³ molecules0.106 mol C₆H₁₂O₆ * 6.023x10²³ molecules/mol = 6.38x10²² moleculesClassify each of the following as either macroscopic, microscopic or particulate:
a. a red blood cell.
b. a sugar molecule.
c. baking powder.
Answer:
Classify each of the following as either macroscopic, microscopic or particulate:
a. a red blood cell.
b. a sugar molecule.
c. baking powder.
Explanation:
a. A red blood cell is a microscopic particle.
It can be viewed under a microscope.
b. A sugar molecule is also a microscopic substance.
It can be viewed under a microscope.
c. Baking powder is macroscopic substance.
Which of the following molecules can be used in catabolic reactions to generate the carbon backbones required for gluconeogenesis?
a. glutathione, a short peptide containing glutamate, serine and histidine
b. butyrate, a short chain fatty acid
c. fructose, a monosaccharide
d. starch, a polysaccharide
Answer:
The correct option is A
Explanation:
Some amino acids, called glucogenic amino acids, when catabolized convert there carbon backbones to tricarboxylic acid (TCA) cycle intermediates. These intermediates can be subsequently metabolized into carbon dioxide and water with the release of ATP or the formation of glucose (known as gluconeogenesis.
All amino acids (with the exception of leucine and lysine) are glucogenic and can thus generate the carbon backbones required for gluconeogenesis. Thus, the correct option is a.
One main difference between the heating of gases on the one hand and solids or liquids on the other is that ___________________. One main difference between the heating of gases on the one hand and solids or liquids on the other is that ___________________. heating of gases depends not only on the temperature difference, but also on the process as well as the amount of gas present. heating of gases depends on temperature difference as well as the amount of gas present. specific heat is not defined for gases. heat cannot be exchanged with gases.
Answer:
heating of gases depends not only on the temperature difference, but also on the process as well as the amount of gas present.
Explanation:
The work done when a gas is heated does not only depends on the initial and final states of the gas but also on the process used to achieve the change of state of the gas.
Several processes can be applied in changing the state of a gas such as; adiabatic process, isobaric process, isochoric process and isothermal process.
Hence, the heating of a gas, depends not only on the temperature difference, as well as the amount of gas present according to the ideal gas laws but also on the process used to achieve the change of state.
Methyl orange can change color by transitioning from one chromophore to another. When added to a clear solution and the solution turns red, it is determined to be a(n) __________ in its __________ stable form.
Answer:
acidic titration in its stable form
Explanation:
Methyl orange can change its color in titration solution. The yellow color is towards alkaline solution and red color is towards acidic solution. The Ph value of solution will change during this chemical process.
Predict the products from reaction of 2-hexyne with the following reagents: (a) 2 equiv Br2 (b) 1 equiv HBr (c) Excess HBr (d) Li in NH3 (e) H2O, H2SO4, HgSO4
Answer:
See explanation and image attached
Explanation:
The reactions of the alkynes involved are shown in the image attached to this answer.
First of all, the reaction of two equivalents of bromine with the alkyne converts it to a saturated compound as shown. One equivalent of HBr converts the alkyne to alkene while excess HBr completely reduces the compound to a saturated compound.
Li/NH3 reduces the alkyne to an alkeneby anti addition to the triple bond.
Reaction of the alkyne with H2O, H2SO4, HgSO4 converts it to an aldehyde as shown.
Water has a density of 1.00 g/mL. If you put an object that has a density of 0.79 g/mL into water, it will sink to the
bottom.
ANSWER:
True
False
Answer:
False
Explanation:
An object with a density greater than 1.00g/mL (greater than the density of water) will sink. An object with a density less than the density of water, will float.
If the water has a density of 1.00 g/mL. If you put an object that has a density of 0.79 g/mL into water, it will sink to the bottom, this statement is false.
What is density?The density of an actual content is its mass per unit volume. The most common symbol for density is d, but the Latin letter D can also be used.
Three of an object's most fundamental properties are mass, volume, and density. Mass describes how heavy something is, volume describes its size, and density is defined as mass divided by volume.
The density of something is a measure of how heavy it is in relation to its size. When an artifact is more dense than water, it plunges; when an object is less dense than water, it floats.
Density is a property of a substance that is independent of the amount of substance.
As in the given scenario, water is having density 1 g/mL and object in having density less then it so it will float on water.
Thus, the given statement is false as the material will not sink, rather it will float on water.
For more details regarding density, visit:
https://brainly.com/question/15164682
#SPJ2
When electrons in a molecule are not found between a pair of atoms but move throughout the molecule, this is called Group of answer choices
Answer:
delocalised electrons
Explanation:
they are called delocalised electrons because that can move freely in the molecule
I have an unknown volume of gas held at a temperature of 115 K in a container with a pressure of 60atm. If by increasing the temperature to 225 K and decreasing the pressure to 30. atm causes the volume of the gas to be 29 liters, how many liters of gas did I start with?
SHOW YOUR WORK
Explanation:
here is the answer to your question.
Explain why caffeine can be extracted from the tea leaves into hot water and how you extracted the aqueous solution and isolated the crude caffeine.
Answer:
The hot water dissolves the flavor and color components.
Explanation:
Caffeine can be extracted from the tea leaves into hot water because the hot water dissolves the flavor and color components away from the solid vegetable. This is an example of a solid-liquid extraction. We can extracted the aqueous solution and isolated the crude caffeine by converting the components of caffeine into their calcium salts which are insoluble in water. Then the caffeine can be extracted from the water by using methylene chloride.
the ability of organism to sense changes in its body is an example of
Answer:
the ability of organism to sense changes in its body is an example of responsiveness.Hope it is helpful to you
a sample of copper was heated at 275.1 C and placed into 272 g of water at 21.0 C. The temperature of the water rose at 29.7 C. How many grams of copper were in the sample
Answer:
104.8 g
Explanation:
From the question given above, the following data were obtained:
Initial temperature of copper (T꜀) = 275.1 °C
Mass of water (Mᵥᵥ) = 272 g
Initial temperature of water (Tᵥᵥ) = 21 °C
Equilibrium temperature (Tₑ) = 29.7 °C
Mass of copper (M꜀) =?
NOTE:
Specific heat capacity of copper (C꜀) = 0.385 J/gºC
Specific heat capacity of water (Cᵥᵥ) = 4.184 J/gºC
Finally, we shall determine the mass of the copper in the sample. This can be obtained as follow:
Heat loss by copper = Heat gained by water
M꜀C꜀(T꜀ – Tₑ) = MᵥᵥCᵥᵥ(Tₑ – Tᵥᵥ)
M꜀ × 0.385 (275.1 – 29.7) = 272 × 4.184(29.7 – 21)
M꜀ × 0.385 × 245.4 = 1138.048 × 8.7
M꜀ × 94.479 = 9901.0176
Divide both side by 94.479
M꜀ = 9901.0176 / 94.479
M꜀ = 104.8 g
Thus, the mass of the copper in the sample is 104.8 g
EXTRACTION OF CAFFEINE 1.Explain the reason each step of the separation is performed with three portions of the solvent rather than with a single portion of solvent. (e.g. Done in triplicate.) (0.5 pt) 2.Why should a separatory funnel not be vigorously shaken
Answer:
Throughout the explanations section below you will find a description of the question.
Explanation:
(1)
Whether a solution would be positioned inside a separative funnel, combined water, as well as solvent, disintegrate particulate caffeine. In every stage, the caffeine content incorporated relies upon the coefficient of caffeine partitioning throughout the combination of water as well as fluid.Thus, increasingly caffeine is taken from the solvent whenever the moment you bring additional solvent. Consequently, we separate the solvent from the single component.(2)
For compounds to be mixed thoroughly and separated into different layers, a shuddering mixture within the dividing funnel would be essential.However, it vibrates the separation funnel forcefully, restricts airflow within the funnel, which can also induce the fluid under it to burst or causing fluid to fire.Question 16(Multiple Choice Worth 5 points)
(04.01 LC) Which statement is true about the total mass of the reactants during a chemical change?
O It is destroyed during chemical reaction.
O It is less than the total mass of the products. O It is equal to the total mass of the products.
O It is greater than the total mass of the products.
Answer:
It is equal to the total mass of the products.
Explanation:
Hope this helps :)
c) Solar energy is the source of all forms of energy.give reasons
Answer:
All energy is made by the sun because without the sun there would be no humans to produce other energy
Explanation:
We use many different forms of energy here on earth, but here’s the thing: almost all of them originate with the sun, not just light and heat (thermal) energy! The law of conservation of energy says that energy can’t be created or destroyed, but can change its form. And that’s what happens with energy from the sun—it changes into lots of different forms:
Plants convert light energy from the sun into chemical energy (food) by the process of photosynthesis. Animals eat plants and use that same chemical energy for all their activities.
Heat energy from the sun causes changing weather patterns that produce wind. Wind turbines then convert wind power into electrical energy.
Hydroelectricity is electrical energy produced from moving water, and water flows because heat energy from the sun causes evaporation that keeps water moving through the water cycle.
Right now, much human activity uses energy from fossil fuels such as coal, oil, and natural gas. These energy sources are created over very long periods of time from decayed and fossilized living matter (animals and plants), and the energy in that living matter originally came from the sun through photosynthesis.
solar panel shows what is the ultimate source of energy
You are stowing items and come across an aerosol bottle of hairspray. What should you do? Please choose all that apply
Answer:stow the hairspray
Explanation:
Match the description with the type of precipitation being described.
1. Its formation requires very strong updrafts
2. Its formation requires falling through a layer of above freezing air
3. Precipitation from cumuliform clouds is typically of this nature
4. Precipitation from stratus clouds is typically of this nature
Options:
a. Hail
b. Drizzle
c. Shower
d. Freezing Rain
Answer:
1. Its formation requires very strong updrafts = a. Hail
2. Its formation requires falling through a layer of above-freezing air = d. Freezing Rain
3. Precipitation from cumuliform clouds is typically of this nature = c. Shower
4. Precipitation from stratus clouds is typically of this nature = Drizzle
Explanation:
Hail formation requires very strong updrafts, these updrafts are the upward moving air created in a thunderstorm. This period of noticeable thunderstorms creates hails.
Freezing rain requires the presence of warm air, it requires falling through a layer of above-freezing air to the colder air below to produce an ice coating on anything it drops on.
Showers are produced by cumuliform clouds which look like cotton balls. Since cumuliform clouds precipitate too, these clouds can have fluctuating rain in a day in the form of showers.
Drizzle which raises low visibility is considered a type of liquid precipitation since it also falls from a cloud. Drizzle which is obviously smaller in diameter when compared to that of raindrops, however, is common with stratus clouds.
Calculate the average atomic mass for X
Answer:
39.0229 amu
Explanation:
Hello there!
In this case, according to given information, the idea here is to multiply the percent abundance by the mass number of each isotope and then add them all together as shown below:
[tex]=0.0967*38+0.7868*39+0.1134*40+0.0031*41\\\\=3.6746+30.6852+4.536+0.1271\\\\=39.0229amu[/tex]
Regards!
