Answer:
The name of the two parts found on the left side of the equation is reactants.
Explanation:
Chemical reaction is the way one substance reacts against another. That is, a chemical reaction is that chemical process in which two or more substances, by the action of an energy factor, are converted into other substances. The new substance (s) that are formed usually present a totally different appearance from that of the starting substances.
In a chemical reaction there are the substances that react, that is, the reactants, and the substances produced, called products.
A chemical reaction is represented by a chemical equation. The formulas of the reactants are written on the left, and those of the products on the right, both separated by an arrow indicating the direction of the reaction.
Reactants ⇒ Products
Then, the name of the two parts found on the left side of the equation is reactants.
How many grams are there in 4.30 x 10²⁶ molecules of H₂SO₄?
Mass of H₂SO₄ : 69,972 g
Further explanationA mole is a number of particles(atoms, molecules, ions) in a substance
This refers to the atomic total of the 12 gr C-12 which is equal to 6.02.10²³, so 1 mole = 6.02.10²³ particles
Can be formulated :
N = n x No
N = number of particles
n = mol
No = 6.02.10²³ = Avogadro's number
moles of H₂SO₄ :
[tex]\tt mol=\dfrac{N}{No}\\\\mol=\dfrac{4.3\times 10^{26}}{6.02\times 10^{23}}\\\\mol=7.14\times 10^2[/tex]
mass H₂SO₄ (MW=98 g/mol) :
[tex]\tt mass=mol\times MW\\\\mass=7.14.10^2\times 98\\\\mass=69,972~g[/tex]
*BRAINLIEST BRAINLIEST
Which wavelength would have the highest energy?
670 nanometers
1.3x10^-10 meters
5.3x10^-8 meters
1.5x10^-3 meters
Answer:
THE 3 third one
Explanation:
How we can preserve the wetlands areas of nepal?
Answer:
Reduce, reuse, and recycle your waste and trash. Protecting the environment helps protect the wetlands, especially since trash can make its way into the water. The best and easiest way to protect the environment is by limiting your household waste.
Hi can anyone help Mehh ! :D
Answer: Renewable becuase the trees can be cut and then replanted.
Explanation:
Non-Renewable resources are resources that cannot be replenished easily through natural process. These are the sources which are used in wise manner so that they do not get depleted. For example: coal, petroleum etc.
Renewable resources are resources that can be replenished overtime through natural process.These are the sources which never depletes completely. For example: bio mass energy, solar energy etc.
As trees can be replenished easily through natural process but it takes a long time for it to occur, it is a renewable source.
According to collision and transition state theories, what is the importance of activation energy?
According to the collision theory, the following criteria must be met in order for a chemical reaction to occur: Molecules must collide with sufficient energy, known as the activation energy, so that chemical bonds can break.
Could I have branliest, heart with 5 stars
Thanks and have a happy Christmas
Collision theory expresses that substance responses (in the gas stage) happen because of crashes between reactants.
Importance of activation energy:To really start a reaction, impacts should be adequately lively (dynamic energy) to break compound bonds; this energy is known as the Activation energy. As the temperature rises, atoms move quicker and impact all the more energetically, significantly improving the probability of bond breakage upon crash.
Find more information about Activation energy here:
brainly.com/question/1380484
how many moles of oxygen molecules can be produced from 6 moles of lead oxide
Answer:
Moles of oxygen molecules produced = 3 mol
Explanation:
Given data:
Moles of oxygen molecules produced = ?
Number of moles of lead oxide decomposed = 6 mol
Solution:
Chemical equation:
2PbO₂ → 2PbO + O₂
Now we will compare the moles of oxygen and lead oxide.
PbO₂ : O₂
2 : 1
6 : 1/2×6 =3 mol
three moles of oxygen molecules are produced.
The atomic number of Arsenic (As) is 33 and the average atomic mass is 74.92 amu. A neutral arsenic atom will have protons
Given :
The atomic number of Arsenic (As) is 33.
The average atomic mass is 74.92 amu.
To Find :
A neutral arsenic atom will have protons.
Solution :
We know, atomic mass is the sum of number of protons and neutrons.
Also, atomic number is the number of protons present in an atom.
Therefore, a neutral arsenic atom will have 33 protons.
Which of the diagrams below shows an atom that is not a form of hydrogen?
Answer:
I believe is the npp i kinda forgot how to do these lol
Diagram with npp type shows an atom that is not a form of hydrogen.
What is an atom?
An atom is defined as the smallest unit of matter which forms an element. Every form of matter whether solid,liquid , gas consists of atoms . Each atom has a nucleus which is composed of protons and neutrons and shells in which the electrons revolve.
The protons are positively charged and neutrons are neutral and hence the nucleus is positively charged. The electrons which revolve around the nucleus are negatively charged and hence the atom as a whole is neutral and stable due to presence of oppositely charged particles.
Atoms of the same element are similar as they have number of sub- atomic particles which on combination do not alter the chemical properties of the substances.
Learn more about atom,here:
https://brainly.com/question/30898688
#SPJ2
What can we do with even more scientific knowledge?
Explanation:
Scientific knowledge allows us to develop new technologies, solve practical problems, and make informed decisions, both individually and collectively.
Answer:
If we had more scientific knowledge, we would be able to increase the productivity of life-saving equipment that provides a longer life for us
be able to make more sensible and informed decisions
make more achievements in studies and be more accurate etc..
Hope this helps<3
What is the energy of a photon that emits a light of frequency 7.21 x 1014 Hz? A. 4.78 x 10-19 J B. 2.76 x 10-19 C. 1.0910-19 J D. 4.16 x 10-19 J
Answer:
E = 4.78×10^−19 J
Explanation:
The chemical equation for the energy of a photon is given by:
E =hν , where h is the Planck constant and ν is the frequency.
E =hν = 6.626×10^−34 Js × 7.21×10^ 14
s−1 = 4.78 × 10^−19 J
Answer:
A. 4.78 x 10-19 J
Explanation:
A P E X
A bottle of hydrogen peroxide that eventually turns into a bottle of water and oxygen gas is an example of a
Sodium chloride (NaCl) is formed in a chemical reaction between sodium (Na) and chlorine (Cl2).
What is sodium chloride?
14.
A.
an element
B.
a mixture
C.
a compound
D.
an atom
Which of the following best describes the relationship between the speed of sound and the type of medium?
A.
Sound travels slower in air because of the large distance between air particles
B.
Sound travels slower in solids because of the small distance between solid particles
C.
Sound travels slower in air because of the small distance between air particles
D.
Sound travels slower in solids because of the large distance between solid particles
Answer:
A. Sound travels slower in air because of the large distance between air particles
Explanation:
Sound is a mechanical wave that requires a medium for its propagation. Without a medium, sound cannot go through easily or readily. This implies that sound cannot be propagated through a vacuum.
A vacuum is an empty space without any particles in side. Sound waves travel fastest the most in solids because the particles are dense and close to one another. The speed of sound in air is the least because of the large distance between air particles. Therefore, the speed of sound is medium dependentGIVING BRAINLIEST!
Please define the following in your own words:
law of conservation of matter
Answer:
No new matter can be created, and no matter can be destroyed. Matter can only change in state or chemical composition. The amount of mass before the change will equal the amount after the change.
Explanation:
balancing skeleton equation can someone help me with this
When any chemical equation is not balanced then that is known as skeletal chemical equation. We need to balance it because as we know that mass can neither be created nor be distroyed and also the number of atoms on the reactant side should always be equal to the compounds on the product side .
Among the groups of elements listed below, which have the same number of electrons in their outermost energy levels? C, K, Ca, Rb, Sr
Na,Mg,AI,S
Li,B,C,F
F,CI,Br,I
Answer:
i believe its d
Explanation:
Answer:
I checked and I too think its D
Sieving is a technique used to separate mixtures containing solid particles of
(a) small sizes
(b) large sizes
(c) the same sizes
(d) different sizes
it can be be be be be ebe be e e
find the odd one out of --retina,cochlea,ciliary muscles,cornea
Answer:
cochlea
Explanation:
Uranium-232 has a half-life of 68.8 years. After 344.0 years, how much uranium-232 will remain from a 375.0-g sample?
Uranium-232 will remain 11.72 g
Further explanationThe atomic nucleus can experience decay into 2 particles or more due to the instability of its atomic nucleus.
Usually radioactive elements have an unstable atomic nucleus.
The main particles are emitted by radioactive elements so that they generally decay are alpha (α), beta (β) and gamma (γ) particles
General formulas used in decay:
[tex]\large{\boxed{\bold{N_t=N_0(\dfrac{1}{2})^{T/t\frac{1}{2} }}}[/tex]
T = duration of decay
t 1/2 = half-life
N₀ = the number of initial radioactive atoms
Nt = the number of radioactive atoms left after decaying during T time
t 1/2 = half-life = 68.8 years
T = duration of decay = 344 years
No= initial sample = 375 g
Uranium-232 remain :
[tex]\tt Nt=375.\dfrac{1}{2}^{344/68.8}\\\\Nt=375.\dfrac{1}{2}^5\\\\Nt=11.72~g[/tex]
Which of the following properties would a substance that has metallic bonding
normally have?
I. thermal conductivity
II. electrical conductivity
III. malleability
IV. ductility
Answer:
I, II, III,IV
Explanation:
Metals are known to possess metallic bonds. In a metallic bond, electro-positive metals loose electrons which form a cloud of electrons which exerts an attractive force on the positive metallic ions. This attractive force holds the metal atoms together in the crystal lattice.
The physical properties of metals include;
I. thermal conductivity
II. electrical conductivity
III. malleability
IV. ductility
Hence, substances that exhibit properties I-IV are metals and have metallic bonds.
The following properties which a substance that has metallic bonding
normally have include
thermal conductivityelectrical conductivitymalleabilityductilityMetals are elements which have metallic bonding which is always strong as
it helps to form a lattice.
Metals are good conductors of heat and electric current , they can also be
bent in to different shapes . This means it has all the properties listed above.
Read more on https://brainly.com/question/20248759
How many liters of water are needed to dissolve 75.0 grams of NaOH to prepare a 1.00-M solution?
Answer:
About 500
Explanation:
Bc i used my calc
Diamonds are formed when carbon is placed under extreme heat and pressure. This process
in caves
in the ocean
In the atmosphere of Earth
beneath the surface of Earth,
Answer:
beneath the surface of Earth
Explanation:
Diamonds are made up of carbon that has been placed under extreme heat and pressure conditions.
These conditions of high pressure and temperature can only be found within the subsurface. As you go deeper to the mantle, the geothermal gradient rises significantly.
Also, the overburden pressure will also be high.
These processes can also occur on other planets and some can be associated to the earth times when the earth was being formed.
The condition at which diamond forms confers some of the distinct natural properties that typifies it.
The solids and liquids with the strongest intermolecular forces of attraction will have the
lowest melting and boiling points.
a. TRUE
b. FALSE
_FeBr3 +_H2SO4 --->_Fe2(SO4)3 +_HBr
Answer:
2FeBr₃ + 3H₂SO₄ ⇒ Fe₂(SO₄)₃ + 6HBr
Explanation:
match the products and reactants of both sides.
Lithium
Which statement about lithium describes what makes lithium very reactive?
F.
The number of neutrons in the nucleus.
G
The number of electrons in the first energy level.
H.
The number of protons in the nucleus.
J.
The number of electrons in the last energy level.
Answer:f
Explanation:
Helpppppppppppppppppppppp
Under which conditions does a real gas behave most like an ideal gas? A. At low temperatures and high pressures B. At low temperatures and low pressures C. At high temperatures and high pressures D. At high temperatures and low pressures
Answer: D. At high temperatures and low pressures
Explanation:
At low temperature and high pressure, the kinetic energy of gas molecules is negligible and molecules will have negligible forces of attraction. So real gases will behave least like an ideal gas under such conditions.
At high temperature and low pressure, energy due to intermolecular forces becomes less important in comparison to the kinetic energy of particles. The size of molecules also become less significant than the empty space between the gas molecules. So real gases behave in a similar manner to ideal gases at high temperature and low pressure.
Is a tooth made out of matter or not matter?
Human teeth are made up of four different types of tissues.
What effects do winds patterns have on climate
Prevailing winds bring air from one type of climate to another. For example, warm winds that travel over water tend to collect moisture as they travel; the water vapor in the air will condense as it moves into colder climates, which is why temperate coastal areas often receive heavy rainfall.
Hope it Helps! T^T
When a chemical change occurs:
A) the law of conservation of mass is always obeyed
B) the chemical properties of new substances are different from the ones you started with
C) all of the options are true
D) atoms are rearranged
Answer:
Are composed together
Explanation:
