Imagine you leave the dock on a fishing boat that travels east for 30 kilometers when the captain realizes he left the fishing rods on the dock. It takes him 40 minutes to travel out against the current but only 20 minutes to return to the dock.
Answer:
Average speed is 60 km/hr whereas average velocity is 0 km/ hr.
Explanation:
The average speed of the boat is 60 km/ hr while on the other hand, the average velocity of the boat is 0 km/ hr because average speed is the total distance covered by the boat in total time and average velocity is the displacement covered by the boat in total time. The total distance covered by the boat is 60 km and the total time is 60 minutes which is equals to one hour so the answer is 60 km/hr whereas the displacement is the shortest distance between initial and final position which is 0 in this case so 0 divided by 60 minutes or one hour is also 0.
Which of the following statements is true about absolute zero?
It is the point at which electrons separate from the nucleus of atoms.
It is the point at which electrons separate from the nucleus of atoms.
It is theoretically the point at which all particle motion stops.
It is theoretically the point at which all particle motion stops.
It occurs at 273 degrees Kelvin.
It occurs at 273 degrees Kelvin.
It is the point at which protons separate from neutrons in the nucleus
Answer:
It is the point at which electrons separate from the nucleus of atoms. It is the point at which electrons separate from the nucleus of atoms. It is theoretically the point at which all particle motion stops. ... It occurs at 273 degrees Kelvin. ... It is the point at which protons separate from neutrons in the nucleus.
Explanation:
A 20-gram bullet traveling at 250 m/s strikes a block of wood that weighs 2 kg. With what velocity will the block and bullet move after the collision? [convert g to kg]
Answer:
the velocity of the bullet-wood system after the collision is 2.48 m/s
Explanation:
Given;
mass of the bullet, m₀ = 20 g = 0.02 kg
velocity of the bullet, v₀ = 250 m/s
mass of the wood, m₁ = 2 kg
velocity of the wood, v₁ = 0
Let the velocity of the bullet-wood system after collision = v
Apply the principle of conservation of linear momentum to calculate the final velocity of the system;
Initial momentum = final momentum
m₀v₀ + m₁v₁ = v(m₀ + m₁)
0.02 x 250 + 2 x 0 = v(2 + 0.02)
5 + 0 = v(2.02)
5 = 2.02v
v = 5/2.02
v = 2.48 m/s
Therefore, the velocity of the bullet-wood system after the collision is 2.48 m/s
Waves that move through space are called
Answer:
Electromagnetic waves are waves that can travel through matter or through empty space
A 5 kg ball is sitting on top of a hill. It has a Potential Energy of 6000J. What is the height of the ball?
Explanation:
mass=5 kg
potential energy=6000j
height=?
Now
potential energy =m.g.h
or 6000=5*9.8*h
or 6000=49h
or 6000÷49=h
or h= 122.45m
The _____________ variable is observed, measured, and affected by the independent variable.
Answer: It would be the dependent variable.
Explanation:
The dependent variable is limited and can be affected by the changes and manipulation of the independent variable.
A flute plays a note with a frequency of 266Hz. What is the speed of sound if the wavelength is 1.3m?
Explanation:
Wave speed = (frequency) x (wavelength)
= (266 /sec) x (1.3 meters)
PLSS HELPP
Are humans evolving? What will humans look like in 100,000 years in the future or longer?
Answer:
yes
Explanation:
Define the types of friction and give FOUR examples of each
Static Friction
Rolling Friction
Sliding Friction
Fluid Friction
Why is the magnetic force considered to be an action datance force
A Magnets in de bo exert a force
B. Magnets do not have to touch each other to experience a force.
C. Magnets push each other apan to increase the distance between them.
D Magnets mast be large in sire in onder to eden a force that is strong enough to notice
A car hits a wall with a force of 80 N and
has a mass of 4.5 kg. What was the
acceleration of the car?
PLEASE HELP!!!!!!!!!!!!!!!!Match the label with the reason it might be important to the consumers.
1. country of origin
Kelli only buys vegetables grown
without pesticides.
Angie only buys foods made with
2. Organic Certification
sea salt to cut sodium intake.
3. dietary guideline
Nikki prefers to buy local products
to lessen her carbon footprint.
Answer:
1 is Nikki
2 is Kelli
3 is Angie
Explanation:
Hope this helps!
A 2.5m long steel piano wire has a diameter of 0.5cm how great is the tention in the wire if it stretches by 0.45cm when tightened taking the young's modulus to be 2.0×10^11 N/m^2
Answer: Their u go i found it their was about 3 pages i did not no what pages u had to do.
Explanation:
What do you call the shot that starts on the right side and continues through to the left
side for a right handed player?
Answer:
When a right-handed golfer’s tee shot curves to far to the left, the shot is described as a “hook.” This shot typically occurs when the club head moves across the ball from left to right, imparting side-spin on the ball
If all the forces acting on an object are balanced then the net force acting on it is zero. True or, false?
Answer:
true
Explanation:
if all forces are equal then there would be no stronger force to give any net force so it would be zero
Light waves are
A.rotating waves.
B.longitudinal waves.
C.circular waves.
D.transverse waves
SHOCKING
Explanation:
Answer:
D i promises.
Explanation:
light waves can go 2 direction
A car and a semi-truck are both traveling along a road. Based on Newton's 2nd law, what will happen if both cars apply the same type of brakes at the same time?
Answer: ask god in your prayers
Explanation: im here for the same reason you are
I DONT KNOW THE ANSWER
Answer:
The semi-truck will stop after the car.
Explanation:
It will do that because the semi-truck has more mass than the car.
Two resistors, 2.50 Ω and 4.95 Ω, are wired in series to a 12.00 V battery. What is the equivalent resistance of the circuit?
Answer:
7.45 Ω
Explanation:
From the question given above, the following data were obtained:
Resistor 1 (R₁) = 2.50 Ω
Resistor 2 (R₂) = 4.95 Ω
Voltage (V) = 12 V
Equivalent Resistance (Rₑq) =?
Since the resistors are in series arrangement, the equivalent resistance can be obtained as follow:
Rₑq = R₁ + R₂
Rₑq = 2.5 + 4.95
Rₑq = 7.45 Ω
Therefore, the equivalent resistance is 7.45 Ω
The half-life of technetium-99 is 6 hours.How much of a 100 milligram sample of
technetium-99 will remain after 30 hours? *
O 3.125 mg
O 12.5 mg
O 6.25 mg
O 1.56 mg
A point source emits sound waves with a power output of 135 watts. What is the sound level (in dB) at a distance of 10 m
Answer:
The sound level of the point source at a distance of 10 meters is approximately 110.294 decibels.
Explanation:
First, we calculate the intensity ([tex]I[/tex]), in watts per square meter, by the Inverse-Square Law:
[tex]I= \frac{\dot W}{4\pi\cdot r^{2}}[/tex] (1)
Where:
[tex]\dot W[/tex] - Power, in watts.
[tex]r[/tex] - Radius, in meters.
And the sound intenity level ([tex]L[/tex]), in decibels, is expressed by:
[tex]L = 10\cdot \log_{10} \frac{I}{I_{o}}[/tex] (2)
Where [tex]I_{o}[/tex] is the reference sound intensity, in watts per square meter.
If we know that [tex]\dot W = 135\,W[/tex], [tex]r = 10\,m[/tex] and [tex]I_{o} = 10^{-12}\,\frac{W}{m^{2}}[/tex], then we find that sound level at a distance of 10 meters is:
[tex]I= \frac{\dot W}{4\pi\cdot r^{2}}[/tex]
[tex]I = 0.107\,\frac{W}{m^{2}}[/tex]
[tex]L = 10\cdot \log_{10} \frac{I}{I_{o}}[/tex]
[tex]L \approx 110.294\,dB[/tex]
The sound level of the point source at a distance of 10 meters is approximately 110.294 decibels.
Which is used to zero a triple beam balance
A.
the pan
B.
a rider
C.
a beam
D.
the tare knob
What is the color of lava at its hottest? Help asap
Which type of map best shows the three dimensions of Earth’s surface?
Answer:
please give me brainlist and follow
Explanation:
topographic map
A topographic map shows a three-dimensional representation of a flat surface. It has contour lines joining points of equal elevation; the closer the lines are the steeper the elevation is.
The equivalent resistance in a series circuit is found by ____
the resistances of all the resistors.
A. multiplying
B. comparing
C. adding the reciprocals of
D. adding
Explanation:
In a series circuit the equivalent resistance is the algebraic sum of the resistances.
A car travels 9 km East, turns around, then travels 3 km West. What is the car's
DISPLACEMENT? *
Explanation:
I think you are 100℅ clear.
Minh spent the weekend on his Wii and now has carpal tunnel syndrome. His 120 V outlet has an electrical current of 8A. What is the resistance in the Wii?
The resistance is 15 ohms.
Also, it's dissipating 960 watts whenever it's turned on. So it's almost as hot as a toaster, and Minh no longer has hands.
6. Sandy adds 3 sugar packets to her tea in order to make it sweeter. She stirs in the sugar and then takes a sip. She notices that not all the sugar was dissolved. What type of solution did she make?
A. Saturated B.Unsaturated C.Supersaturated D.Mildly saturated
Answer:
C.Supersaturated
Explanation:
There are three types of solution:
SATURATED SOLUTION:
It is the solution that contains maximum amount of solute dissolved in a solution in normal conditions.
UNSATURATED SOLUTION:
It is the solution that contains less than the maximum amount of solute dissolved in a solution in normal conditions. It has space for more solute to be dissolved in it.
SUPERSATURATED SOLUTION:
It contains more than the maximum amount of solute dissolved in it. Such a solution has no capacity to dissolve any more solute under any conditions.
Since the sugar is no more dissolving in the tea and has settled down. Therefore, the solution is:
C.Supersaturated
Please Help Me!!!
Water is a colorless and odorless liquid. It can exist in solid, liquid, and gas states. It boils at 100 degrees C and melts at 0 degrees C.
Which option best describes this information?
A.
These are the physical properties of water.
B.
These are the chemical properties of water.
C.
These are the physical changes water undergoes.
D.
These are the chemical changes water undergoes.
E.
These are the molecular changes water undergoes.
Answer:
There are the molecular changes water undergoes
WILL MAKE BRAINLIEST! How does Hooke’s law help us understand the force and energy in elastic materials?
Answer:
How does Hooke’s law help us understand the force and energy in elastic materials?:
When the elastic materials are stretched, the atoms and molecules deform until stress is been applied and when the stress is removed they return to their initial state
Explanation:
Blackie, a cat whose mass is 6-kg, is napping on top of the refrigerator when he rolls over and fall. Blackie has a KE of 90-J just before he lands on his feet on the floor.
How tall is the refrigerator?
To answer this question, you need to understand the law of conservation of energy. Essentially, the law states that energy cannot be created or destroyed; it is always conserved.
Knowing this law, how can we answer this question? Well, let's look at what the question tells us. We know that Blackie was initially at the top of a refrigerator before rolling over and falling to the ground. At ground level, he only has Kinetic energy when he lands. Since we know that he started at the top of the fridge, we know that Blackie started off with potential gravitational energy.
That would make sense, right? Written out as an equation, it'd be:
[tex]U_{g}[/tex] = [tex]K_{E}[/tex]
This follows the law of conservation of energy, as all the potential gravitational energy is converted into Kinetic energy.
Now, we know what energies are converted. What can we do with it? Recall the equation of potential gravitational energy:
[tex]U_{g}[/tex] = [tex]F_{g}[/tex]∆H
[tex]U_{g}[/tex] = mg∆H
Do you see it now? ∆H is the distance that Blackie falls, and since Blackie jumps from the fridge to the ground, ∆H must be the height of the fridge!
Let's start solving for ∆H:
[tex]U_{g}[/tex] = [tex]K_{E}[/tex]
Substitute potential gravitational energy with our equation:
mg∆H = [tex]K_{E}[/tex]
We were given the value of Kinetic Energy:
mg∆H = 90
Isolate ∆H by dividing both sides by mg:
∆H = [tex]\frac{90}{mg}[/tex]
Input values for 'm' and 'g' (m is the mass of Blackie and g is Earth's acceleration)
∆H = [tex]\frac{90}{6*9.80}[/tex]
∆H = [tex]\frac{90}{58.8}[/tex]
∆H = 1.53
The refrigerator is 1.53 meters tall.
And that's it! Let me know if you need me to explain anything I did here.
- breezyツ
