Answer: will increase but this will not affect living standards
Explanation:
GDP is sometimes called an incomplete measure because there are certain measures that it does not include such as the black market.
If firms in the black market shift to the formal sector, they will now be included in GDP which means that GDP will increase.
The living standards of people in the country will probably not change however because the firms involved were simply shifting sectors and are not said to be more or less prosperous as a result. Assuming they remained the same, nothing changes for living standards.
Show what happens to the firm's output choice and profit if the price of the product falls from $52 to $42. If the market price falls from $52 to $42, then the firm's output will decrease or increase from _____units to _____ units. (Enter your responses using integers.)
Answer: The firm's output will therefore decrease from 9 units to 8 units.
Explanation:
This firm most likely operates in a competitive market where price is the same as marginal revenue.
In such a market, firms will try to maximize output by selling at a level where Price is equal to Marginal cost and if they cannot get here, they try to make them as close as possible so long as marginal cost does not exceed price.
As this is the case, when the price was $52, the closest Marginal cost that isn't higher than price was $45 for an output level of 9 units.
If the product falls to $42, the closest marginal cost that isn't higher than the cost is $38 for 8 units.
The firm's output will therefore decrease from 9 units to 8 units.
Maverick law office currently orders ink refills 120 units at a time. The firm estimates that carrying cost is 40% of the $10 unit cost and that annual demand is about 480 units per year. The assumptions of the basic EOQ model are thought to apply. For what value of ordering cost would its current action (order quantity) be optimal
Answer:
Economic order quantity (EOQ)= 49 units
Explanation:
Giving the following information:
Demand= 480 units per year
Order cost= $10
Holding cost= 10*0.4= $4
Economic order quantity (EOQ) is the ideal order quantity a company should purchase to minimize inventory costs such as holding costs, shortage costs, and order costs.
Economic order quantity (EOQ)= √[(2*D*S)/H]
D= Demand in units
S= Order cost
H= Holding cost
Economic order quantity (EOQ)= √[(2*480*10) / 4]
Economic order quantity (EOQ)= √(2,400)
Economic order quantity (EOQ)= 49 units
An employee on the Internet-facing part of a company's website submits a 20-character phrase in a small textbox on a web form. The website returns a message back to the browser stating Error: Table 'advprofile' entry into column 'Inane' has exceeded number of allowed characters. Error saving database information. Of which of the following is this an example?
A. Resource exhaustion
B. Buffer overflow
C. Improperly configured account Improper error handing
Answer:
(B) Buffer Overflow
Explanation:
The description in the question is an example of a Buffer Overflow. This is also called a Buffer Overrun.
As the question depicts, the employee input more characters than was required in the text box. The text box was programmed to allow a more limited number of characters; maybe 15, 12, 18, etc but not up to 20.
A buffer is a storage space that holds data temporarily while it's being transported to a new space. An overrun on the buffer will occur if or when the inputed data exceeds the storage capacity of the buffer.
This overrun can cause the program to crash or access errors to develop; like the errors displayed in the question.
JacksonIndustries produces two products. The products' estimated costs are as follows:
Product A Product B
Direct Materials $20,000 $15,000
Direct Labor $30,000 $10,000
The company's overhead costs of $200,000 are allocated based on labor cost. Assume 4,000 units of product A and 5,000 units of Product B are produced. What is the total amount of production costs that would be assigned to Product A? (Do not round intermediate calculations.)
a. $200,000
b. $75,000
c. $50,000
d .$150,000
e. $114,285.71
Answer:
Total production cost= $200,000
Explanation:
First, we need to calculate the predetermined overhead rate:
Predetermined manufacturing overhead rate= total estimated overhead costs for the period/ total amount of allocation base
Predetermined manufacturing overhead rate= 200,000 / (30,000 + 10,000)
Predetermined manufacturing overhead rate= $5 per direct labor cost
Now, we can allocate overhead to Product A:
Allocated MOH= Estimated manufacturing overhead rate* Actual amount of allocation base
Allocated MOH= 5*30,000
Allocated MOH= $150,000
Finally, the total production cost for Product A:
Total production cost= 150,000 + 20,000 + 30,000
Total production cost= $200,000
6. Why is training important?
Answer:Training is important because it represents a good opportunity for employees to grow their knowledge base and improve their job skills to become more effective in the workplace. Despite the cost of training for employees, the return on investment is immense if it is consistent.
Explanation:
Assume that inflation averages 3.50% over the next 20 years. If Carlos invests $25,000 in an exchange-traded fund within a tax-deferred account and that investment grows to $45,000 at the end of 20 years, will he have maintained his purchasing power
Answer: Yes, because the ETF is worth more than his original investment
Explanation:
From the information given in the question, the average inflation for next 20 years = 3.50%
Amount invested by John = $25,000
Then, the amount in 20 years after the adjustment of inflation will be:
= Amount invested (1+inflation rate)^n
= 25000(1+0.035)^20
= 25000(1.035)^20
= 25000 × 1.9898
= $49745
In this case, the answer is Yes due to the fact that the ETF is worth more than his original investment.
Darby Company, operating at full capacity, sold 163,500 units at a price of $87 per unit during the current year. Its income statement is as follows:
Sales $14,224,500
Cost of goods sold 5,046,000
Gross profit $9,178,500
Expenses:
Selling expenses $2,523,000
Administrative expenses 1,508,000
Total expenses 4,031,000
Income from operations $5,147,500
The division of costs between variable and fixed is as follows:
Variable Fixed
Cost of goods sold 60% 40%
Selling expenses 50% 50%
Administrative expenses 30% 70%
Management is considering a plant expansion program for the following year that will permit an increase of $1,131,000 in yearly sales. The expansion will increase fixed costs by $150,800, but will not affect the relationship between sales and variable costs.
Required:
Determine the total variable costs and the total fixed costs for the current year.
Answer:
Variable costs in current year:
= Variable Cost of goods sold + Variable Selling expense + Variable Admin expenses
= (5,046,000 * 60%) + (2,523,000 * 50%) + (1,508,000 * 30%)
= 3,027,600 + 1,261,500 + 452,400
= $4,741,500
Fixed costs:
= (Total cost of goods sold + Total selling expenses + Total admin expenses) - Variable expenses
= (5,046,000 + 2,523,000 + 1,508,000) - 4,741,500
= $4,335,500
MC Qu. 59 A company's flexible budget for... A company's flexible budget for 16,000 units of production showed sales, $96,000; variable costs, $56,000; and fixed costs, $20,000. The sales expected if the company produces and sells 20,000 units is (Do not round intermediate calculations):
Answer: $120,000
Explanation:
First find the selling price of the units.
= Sales / Number of units produced
= 96,000 / 16,000
= $6 per unit
If 20,000 units are sold, the sales would be:
= Number of units sold * selling price
= 20,000 * 6
= $120,000
Materials Variances Krumple Inc. produces aluminum cans. Production of 12-ounce cans has a standard unit quantity of 4.5 ounces of aluminum per can. During the month of April, 300,000 cans were produced using 1,240,000 ounces of aluminum. The actual cost of aluminum was $0.18 per ounce and the standard price was $0.08 per ounce. There are no beginning or ending inventories of aluminum. Required: Calculate the materials price and usage variances using the columnar and formula approaches. Enter amounts as positive numbers and select Favorable or Unfavorable. Materials Price Variance$fill in the blank 1 Material Usage Variance$fill in the blank 3
Solution :
Variance Calculations Result
Direct material 0.08(300,000 x 4.5 - 1,240,000) 8,800 favorable
usage variance
Direct material 1,240,000 x (0.08 - 0.18) 124,000 unfavorable
price variance
The standard quantity = actual production x standard quantity per unit
= 300,000 x 4.5
= 1,350,000
What is choice ? Choice is problem how
Answer:
Problem of choice refers to the allocation of various scarce resources which have alternative uses that are utilized for the production of various commodities and services in the economy for the satisfaction of unlimited human wants.
A woman arrives at the clinic for a pregnancy test. The first day of her last menstrual period (LMP) was February 14, 2013. Her expected date of birth (EDB) would be: _________
a) November 21, 2013.
b) October 17, 2013
c) December 9, 2013
d) November 7, 2013
Answer:
a) November 21, 2013
Explanation:
The expected date of birth (EDB) would be calculated using Naegele's Rule and it is based on a normal 28 days menstrual cycle. The steps are as follows:
First, we need to identify the first day of the last menstrual period (LMP). Then we would count it back to three calendar months from that date. Finally, we would add 1 year and 7 days to that date.
In which case, the first day of LMP is February 14, 2013. Going back three months the date would be November 14, 2012. Finally, when we add 1 year and 7 days it would bring you to November 28, 2013, as the estimated due date.
If Jackson Collectibles, Inc. has a safety stock of 35 units and the average weekly demand is 14 units, how many days can be covered if the shipment from the supplier is delayed?
A) 2.5 days
B) 17.5 days
C) 21 days
D) 35 days
E) 7.0 days
Answer: B. 17.5 days
Explanation:
The safety stock that Jackson Collectibles has is 35 units.
Their weekly demand however is 14 units.
This means that the number of weeks they can survive on safety stock is:
= Safety stock / demand per week
= 35 / 14
= 2.5 weeks
In days this is:
= 2.5 * 7
= 17.5 days
1. The process of establishing the image or identity of a brand or product so that customers perceive it in a certain way is the definition of which of the following terms?
A. Marketing Strategy,
B. Social Media,
C. Marketing Position,
D. Target market
2. Anton's Coffee positions itself to provide the highest quality and most unique coffee drinks in the area. This is an example of which of the following?
A. Marketing Strategy
B. Social Media
C. Target Market
D. Marketing Postion
Answer:
Answer of your question is Marketing PositionExplanation:
Market positioning refers to the process of establishing the image or identity of a brand or product so that consumers perceive it in a certain way. For example, a car maker may position itself as a luxury status symbol.Dawson Toys, Ltd., produces a toy called the Maze. The company has recently created a standard cost system to help control costs and has established the following standards for the Maze toy:
Direct materials: 7 microns per toy at $0.33 per micron
Direct labor: 1.4 hours per toy at $6.70 per hour
During July, the company produced 5,000 Maze toys. The toy's production data for the month are as follows:
Direct materials: 70,000 microns were purchased at a cost of $0.29 per micron. 26,250 of these microns were still in inventory at the end of the month.
Direct labor: 7,500 direct labor-hours were worked at a cost of $54,750.
Required:
a. Compute the following variance for july
b. The materials price and quantity variances
c. The labor rate and efficiency variances
Answer:
Results are below.
Explanation:
To calculate the direct material price and quantity variance, we need to use the following formulas:
Direct material price variance= (standard price - actual price)*actual quantity
Direct material price variance= (0.33 - 0.29)*70,000
Direct material price variance= $2,800 favorable
Direct material quantity variance= (standard quantity - actual quantity)*standard price
Direct material quantity variance= (5,000*7 - 43,750)*0.33
Direct material quantity variance= $2,887.5 unfavorable
To calculate the direct labor rate and efficiency variance, we need to use the following formulas:
Direct labor rate variance= (Standard Rate - Actual Rate)*Actual Quantity
Direct labor rate variance= (6.7 - 7.3)*7,500
Direct labor rate variance= $4,500 unfavorable
Actual rate= 54,750 / 7,500= $7.3
Direct labor time (efficiency) variance= (Standard Quantity - Actual Quantity)*standard rate
Direct labor time (efficiency) variance= (5,000*1.4 - 7,500)*6.7
Direct labor time (efficiency) variance= $3,350 unfavorable
A building is acquired on January 1, at a cost of $830,000 with an estimated useful life of eight years and salvage value of $75,000. Compute depreciation expense for the first three years using the double-declining-balance method. (Round your answers to the nearest dollar.)
Answer:
$207,500
$155,625
$116,719
Explanation:
Depreciation expense using the double declining method = Depreciation factor x cost of the asset
Depreciation factor = 2 x (1/useful life) = 2/8 = 1/4
1 = $830,000 / 4 = 207,500
book value $830,000 - 207,500 = 622,500
2 = 622,500 / 4 = 155,625
book value = 622,500 - 155,625 = 466875
3 466875 / 4 = 116,718.75 = 116,719
Bricktan Inc. makes three products, basic, classic, and deluxe. The maximum Bricktan can sell is 715,000 units of basic, 420,000 units of classic, and 120,000 units of deluxe. Bricktan has limited production capacity of 90,000 hours. It can produce 10 units of basic, 8 units of classic, and 4 units of deluxe per hour. Contribution margin per unit is $15 for the basic, $25 for the classic, and $55 for the deluxe. What is the most profitable sales mix for Bricktan Inc.? 1
A. 50,000 basic, 120,000 classic and 240,000 deluxe.
B. 75,000 basic, 420,000 classic and 120,000 deluxe.
C. 600,000 basic, 0 classic and 120,000 deluxe.
D. 71,500 basic, 420,000 classic and 240,000 deluxe.
E. 300,000 basic, 240,000 classic and 120,000 deluxe.
Answer:
B. 75,000 basic, 420,000 classic and 120,000 deluxe.
Explanation:
Products Available : Basic, Classic , Deluxe
Contribution margin per unit: $15 , $25, $55
Production units per hour : 10, 8 , 4
Contribution margin per production hour : $150 , $200 , $220
Maximum number of units to be sold: 715,000, 420,000, 120,000
Hours required to produce these units: 71,500, 52,500, 30,000
Units produced maximum sales : 75,000, 420,000, 120,000
You are closing the accounts you used to bill the project costs, but you still have some lingering expenses. Which best practice should you follow?
Answer:
Close all accounts except for the one related to the follow-up activities until the remanding expenses are complete.
Explanation: You never what to close out an account when the project has not been completed. If you still have remanding expenses the project is not complete.
Huffman Corporation constructed a building at a cost of $30,000,000. Weighted-average accumulated expenditures (WAAE) were $12,000,000, actual interest was $1,200,000, and avoidable interest was $1,600,000. If the salvage value is $2,400,000, and the useful life is 40 years, depreciation expense for the first full year using the straight-line method is
a. $690,000
b. $705,000.
c. $720,000.
d. $735,000.
Answer:
$730,000
Explanation:
Calculation to determine what depreciation expense for the first full year using the straight-line method is
Using this formula
Depreciation expense=Costs of Building+Avoidable interest-Salvage value)/Useful life
Let plug in the formula
Depreciation expense=( $30,000,000 + $ 1,600,000- $2,400,000) / 40 years
Depreciation expense=$29,200,000/40 years
Depreciation expense= $730,000
Therefore depreciation expense for the first full year using the straight-line method is $730,000
the baking department started the month with 23,500 units in its beginning work in process inventory. An additional 216,000 units started into production during the month to begin processing. There were 193,900 units in completed and transferred to the next processing department during the month. How many units were in ending work in process inventory at the end of the month
Answer:
45,600 units
Explanation:
Calculation to determine How many units were in ending work in process inventory at the end of the month
Using this formula
Units in ending work in process = Units in beginning work in process + Units started into production – Units transferred to the next department
Let plug in the formula
Units in ending work in process= 23,500 units + 216,000 units – 193,900 units
Units in ending work in process= 45,600 units
Therefore the number of units that were in ending work in process inventory at the end of the month is 45,600 units
Assume the government has a balanced budget and that the economy is experiencing a period of growth higher than predicted. The tax revenue collected by the government is likely to ________, which would lead to a ________.
The tax revenue that is collected by the government is likely to increase which would then lead to a budget surplus.
A budget reveals the expenditure and the revenue of the government for a particular fiscal year.
Since there is a balanced budget such that the revenue and the expenses for the given year is thesame, then due to the higher growth, there'll be an increase in the tax revenue.
The increase in tax revenue will then lead to a situation whereby the revenue is more than the expenditure, therefore this will lead to a budget surplus.
Read more on:
https://brainly.com/question/17198039
_______________ tasks are non-repetitive in nature and involve considerable
application of knowledge, judgment, and expertise. As such, the teams draw their members from different disciplines and functional units, so that specialized expertise can be applied to the task(s) at hand.
1) Project teams
2) Management teams
3) Parallel teams
4) None of these make sense to me.
5) Work teams
Answer:
1) Project teams
Explanation:
Project management can be defined as the process of designing, planning, developing, leading and execution of a project plan or activities using a set of skills, tools, knowledge, techniques and experience to achieve the set goals and objectives of creating a unique product or service.
The fundamentals of Project Management are considered universal across most businesses and professions.
The fundamentals of Project Management includes;
1. Project initiation
2. Project planning
3. Project execution
4. Monitoring and controlling of the project
5. Adapting and closure of project.
Project teams comprises individuals or group of people that come together as a unit to take on a one-time and non-repetitive tasks that are generally considered to be often complex and as such would require input from members with different types of training, skills, knowledge competence and expertise.
This ultimately implies that, project teams tasks are non-repetitive in nature and involve considerable application of knowledge, skills, competence, judgment, and expertise.
You own a portfolio equally invested in a risk-free asset and two stocks. If one of the stocks has a beta of 1.62 and the total portfolio is exactly as risky as the market, what must the beta be for the other stock in your portfolio
Answer:
1.71
Explanation:
Systemic risk is measured by beta. The higher beta is, the higher the systemic risk and the higher the compensation demanded for by investors
The market has a beta of one. If a portfolio has the same level of systematic risk that is the same as that of the market, its beta would be equal to 1.
The beta of a risk free asset is zero
The portfolio's beta can be determined by adding together the weighted beta of each stock in the portfolio
weighed beta of a stock = percentage of the stock in the portfolio x beta of the stock
1 = (0.3 x 1.62) + (0.3 x 0) + (0.3 x a)
1 = 0.486 + 0 + 0.3a
1 - 0.486 = 0.3a
a = 1.71
Skysong, Inc. has the following inventory data: July 1 Beginning inventory 30 units at $19 $570 7 Purchases 105 units at $20 2100 22 Purchases 15 units at $22 330 $3000 A physical count of merchandise inventory on July 30 reveals that there are 50 units on hand. Using the average cost method, the value of ending inventory is
Answer: $1000
Explanation:
Using the average cost method, the value of ending inventory will be calculated thus:
Average cost per unit = Total cost / Total number of units
= $3000/150
= $20 per unit
Value of ending inventory = 50 units × $20 = $1000
Therefore, the value of ending inventory is $1000.
How do you actually do this? On there template and save it or make my own template.? So confused.
Scenario
You are a certified public accountant (CPA) who is working with a small bakery to prepare their financial statements for three months of the current
fiscal year. Because the company is a startup and so small, the accounting is done manually in Microsoft Excel. You have been given the accounts
and information you need to prepare their financial statements, but you will need to use the accounting cycle to report accurate information to the
finance department
Prompt
Accrual Basis: In your company accounting workbook, apply the accrual basis of accounting and prepare adjusting entries to ensure accurate
accounting for expenses that lack transactions in the current period. (You may refer to the Company Accounting Workbook Template
Spreadsheet if necessary, but keep in mind that your work for this milestone should be added to the work you completed in your workbook for the
previous milestone.)
Specifically, you must address the following rubric criteria:
• Unadjusted Trial Balance: Prepare the unadjusted trial balance portion of the Trial Balance" tab of the company accounting workbook,
ensuring that the total debits and credits match.
• Adjusting Entries: Prepare the "Adjusting Entries" tab of the company accounting workbook. Ensure that the entries are correctly transferred
to the adjusting entries portion of the Trial Balance" tab.
• Adjusted Trial Balance: Prepare the adjusted trial balance on the "Trial Balance" tab, ensuring that the debit and credit totals match.
Guidelines for Submission
Build on your work from Milestone One to complete the "Trial Balance" and "Adjusting Entries" tabs in your company accounting workbook. This
should be completed and submitted using Microsoft Excel. Please note that there are drop-down menus embedded in the "Accounts" columns as
well as formulas throughout the spreadsheet to help you complete the workbook without accidentally introducing errors.
Answer:
The answer is in the picture, Thanks
Explanation:
There are different kinds of template. The template workbook adjustment is shown in the image attached.
What is Adjusting entries?This is known to be any kind of alterations or changes that are made to journal entries of which a person has already recorded.
Note that these changes are done so that one can be sure that the numbers a person have recorded are in line or match up with the correct accounting periods. Therefore, the adjustment is shown in the image attached.
Learn more about template adjustment from
https://brainly.com/question/26511117
#SPJ2
Tái chế không phải 1 phương pháp hoàn hảo để giải quyết vấn đề ô nhiễm mt
Answer:
ý thức về việc xả rác, ngưng xả rác , bỏ rác đúng nơi quy định
The unit quantity standard of a product is 3 pounds per package, and the unit quantity standard for machine hours is 0.40 hours per package. During August, 190,000 packages were produced. 430,000 pounds and 77,000 hours were used in production. How many pounds and how many machine hours should have been used for the actual output
Answer:
Standard pounds= 570,000 pounds
Standard hours= 76,000 hours
Explanation:
Giving the following information:
Standard pounds= 3 pounds per package
Standard hours= 0.40 hours per package.
During August, 190,000 packages were produced.
To calculate the standard quantity of pounds and hours that should have been used, we need to multiply the standard rate whit the actual output.
Standard pounds= 190,000*3= 570,000 pounds
Standard hours= 0.4*190,000= 76,000 hours
According to purchasing power parity, if the domestic inflation rate is ________ than that in the foreign country, the domestic currency should be ________ than that of the foreign country.
Answer:
lower; stronger
Explanation:
Purchasing power parity (PPP) is a theory where the exchange rates of the states that lies between the currencies should be in equilibrium
Also their purchasing power should be similar in each and every of the two countries
So as per the purchasing power parity when the inflation rate of domestic one should be less as compared to the foreign country so the domestic currency should be stronger as compared to the foreign country
On July 1, 2022, Cullumber Company sells equipment for $146000. The equipment originally cost $480000, had an estimated 5-year life and an expected salvage value of $50000. The Accumulated Depreciation account had a balance of $301000 on January 1, 2022, using the straight-line method. The gain or loss on disposal is
Answer:
Accumulated depreciation = ($480,000 - $50,000)/5 *6/12 + $301,000
Accumulated depreciation = $43,000 + $301,000
Accumulated depreciation = $344,000
Date Account titles & Explanations Debit Credit
Cash $146,000
Accumulated depreciation $344,000
Gain on disposal $10,000
Equipment $480,000
So, the gain on disposal is $10,000
Suppose a chair manufacturer is producing in the short run (with its existing plant and equipment). The manufacturer has observed the following levels of production corresponding to different numbers of workers:
Number of Workers Number of Chairs
1 10
2 18
3 24
4 28
5 30
6 28
7 25
a. Calculate the marginal and average product of labor for this production function.
b. Does this production function exhibit diminishing returns to labor
Answer:
(a)
MP = TPn - TPn-1
AP = TP/Q
No. of workers No. of chairs MP AP
1 10 - 10
2 18 8 9
3 24 6 8
4 28 4 7
5 30 2 6
6 28 - 2 4.6
7 25 -3 3.5
(b) Yes, this production function exhibits diminishing returns to labor. As we increase the number of laborers, the output per worker falls. we will see that the AP is falling with the rise parturient.
______ occur whenever a third party receives or bears costs arising from an economic transaction in which the individual (or group) is not a direct participant.
a. Pecuniary benefits and costs
b. Externalities
c. Intangibles
d. Monopoly costs and benefits
The choose b. Externalities
Externalities occur whenever a third party receives or bears costs arising from an economic transaction in which the individual (or group) is not a direct participant.
I hope I helped you^_^
