Answer:
Rock A will have far more chemical weathering than Rock B due to the rise in area effect
Explanation:
Rock A undergoes both Physical and Chemical weathering. So, thanks to physical weathering there'll appear cracks within the rock, which can, in turn, increase the area of rock on which weathering is occurring. So, Chemical weathering will happen much faster now as there's a rise in the area. within the case of Rock B, there's only chemical weathering therefore the increase in the area won't be that very much like compared to Rock A.
1. Consider the following thermochemical reaction for kerosene:
2 C12H26(l) + 37 O2(g) 24 CO2(g) + 26 H2O(l) + 15,026 kJ
(a) When 21.3 g of CO2 are made, how much heat is released?
(b) If 500.00 kJ of heat are released by the reaction, how grams of C12H26 must have been consumed ?
(c) If this reaction were being used to generate heat, how many grams of C12H26 would have to be reacted to generate
enough heat to raise the temperature of 750g of liquid water from 10oC to 90oC?
2. Consider the reaction: NaNO3(s) + H2SO4(l) → NaHSO4(s) + HNO3(g) ΔH° = 21.2 kJ
How much heat must absorbed by the reaction system to convert 100g of NaNO3 into NaHSO4(s)?
3. What is the enthalpy change when 49.4 mL of 0.430 M sulfuric acid reacts with 23.3 mL of 0.309 M potassium
hydroxide?
3.
H2SO4(aq) + 2KOH(aq) → K2SO4(aq) + 2H2O(l) ΔH° = –111.6 kJ/mol
do you have the specific heat for part 2?
What volume (in liters) of a solution contains 0.14 mol of KCl?
1.8 M KCl
Express your answer using two significant figures.
Answer:
[tex]\boxed {\boxed {\sf 0.078 \ L }}[/tex]
Explanation:
We are asked to find the volume of a solution given the moles of solute and molarity.
Molarity is a measure of concentration in moles per liter. It is calculated using the following formula:
[tex]molarity= \frac{moles \ of \ solute}{liters \ of \ solution}[/tex]
We know there are 0.14 moles of potassium chloride (KCl), which is the solute. The molarity of the solution is 1.8 molar or 1.8 moles of potassium chloride per liter.
moles of solute = 0.14 mol KCl molarity= 1.8 mol KCl/ Lliters of solution=xSubstitute these values/variables into the formula.
[tex]1.8 \ mol \ KCl/ L = \frac { 0.14 \ mol \ KCl}{x}[/tex]
We are solving for x, so we must isolate the variable. First, cross multiply. Multiply the first numerator and second denominator, then the first denominator and second numerator.
[tex]\frac {1.8 \ mol \ KCl/L}{1} = \frac{0.14 \ mol \ KCl}{x}[/tex]
[tex]1.8 \ mol \ KCl/ L *x = 1*0.14 \ mol \ KCl[/tex]
[tex]1.8 \ mol \ KCl/ L *x = 0.14 \ mol \ KCl[/tex]
Now x is being multiplied by 1.8 moles of potassium chloride per liter. The inverse operation of multiplication is division, so we divide both sides by 1.8 mol KCl/L.
[tex]\frac {1.8 \ mol \ KCl/ L *x}{1.8 \ mol \ KCl/L} = \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]
[tex]x= \frac{0.14 \ mol \ KCl}{1.8 \ mol \ KCl/L}[/tex]
The units of moles of potassium chloride cancel.
[tex]x= \frac{0.14 }{1.8 L}[/tex]
[tex]x=0.07777777778 \ L[/tex]
The original measurements of moles and molarity have 2 significant figures, so our answer must have the same. For the number we found, that is the thousandth place. The 7 in the ten-thousandth place tells us to round the 7 up to a 8.
[tex]x \approx 0.078 \ L[/tex]
There are approximately 0.078 liters of solution.
Explain the general properties of aqueous solution based on the following support your answer with examples for each case
1. Electrolytes versus non-electrolyte
2. Precipitation reaction
3. Solubility
An aqueous solution, based on its name, is a water based solution, such that the solvent is water. In such solution, ionic compounds when dissolved, tend to dissociate into the constituent ions, for example, sodium chloride, NaCl forms an aqueous solution of sodium, Na⁺ and chloride, Cl⁻
1) Therefore, aqueous solutions are good electrolyte when ionic, and are therefore, good electrolytes which conduct electricity compared to solids that form non-electrolyte
2) A precipitation reaction is the insoluble product formed by the combination of cations and anions to form ionic solids that are insoluble
3) Aqueous solutions are made with substance that are soluble in water
Learn more about aqueous solution here;
https://brainly.com/question/19587902
Consider an equilibrium (K1) that is established after 10 mL of compound A and 10 mL of compound B are mixed. Now, imagine the equilibrium (K2) where 1 mL of compound A is added to 100 mL of compound B. How are K1 and K2 related algebraically (read this question VERY carefully, at least one more time)?
K1 and K2 are related algebraically because once the values are inserted into the equilibrium equation, both equations will yield a denominator of 100.
How many protons does Tin have?
A. 50
B. 68
C. 118
Hello There!
Tin has 50 protons.Hope that helps you!
~Just a felicitous girlie
#HaveASplendidDay
[tex]SilentNature[/tex]
In an ELISA, the compound 4-chloro-1-naphthol is used because:_______
a. it turns color in the presence of an enzyme that is bound to the secondary antibody
b. it helps the primary antibody bind to the protein
c. it helps the secondary antibody to bind to the protein
d. all of the choices
Answer:
a. It turns color in the presence of an enzyme that us bound to the secondary antibody.
Explanation:
The compound chloronapthenel is used in the reaction because it changes the color in the presence of an enzyme. It is strong organic compound which is used in biochemical processes.
The color cyan has a frequency of 5.902x10^14 What is the wavelength in nm ? Record your answer with 2
decimals.
The wavelength of the color cyan is 508 nm.
To solve the problem, we use the following equation that relates the frequency (ν) and the wavelength (λ) of a wave:
c = λ x ν
Given:
c = speed of light = 3.00 x 10⁸ m/s (is a constant)
ν = 5.902 x 10¹⁴ Hz = 5.902 s⁻¹
We introduce the data to calculate the wavelength in m:
λ = c/ν = (3.00 x 10⁸ m/s)/(5.902 s⁻¹) = 5.08 x 10⁻⁷ m
We know that 10⁻⁹m = 1 nm, so we convert λ to nm:
λ = 5.08 x 10⁻⁷ m x 1 nm/10⁻⁹m = 508 nm
To learn more about the relationship between frequency and wavelength in a wave, you can visit: https://brainly.com/question/4386945
Find the volume occupied by 128g of SO2.
The volume occupied by the given amount of sulfur dioxide will be 84 L.
please show working my dear citizen
Consider the reaction below. How much heat is absorbed if 5.00 moles of nitrogen react
with excess oxygen?
2 N2 (8) + O2(g) → 2 N20 (8) AHrxn- +163.2 kJ
Explanation:
The given chemical reaction is:
[tex]2 N_2 (g) + O_2(g) -> 2 N_20 (g) delta Hrxn= +163.2 kJ[/tex]
When two moles of nitrogen reacts with oxygen, it requires 163.2kJ of energy.
When 5.00 mol of nitrogen requires how much energy?
[tex]5.00 mol x \frac{163.2 kJ }{2 mol} \\=408 kJ[/tex]
Hence, the answer is 408 kJ of heat energy is required.
The following is what kind of reaction?
2 CH4 +4 02 → 2 CO2 + 4H2O
Answer:
It is a combustion reaction.
What functional group is found in an alcohol?
A. Ester
B. Amino
C. Carbonyl
D. Hydroxyl
Answer:
an alcohol is a Hydroxyl group due to the OH~ that is associated with it's molecules
The functional group found in an alcohol is Hydroxyl . Therefore, the correct option is option D.
What is functional group?A functional group in organic chemistry is a substituent and moiety inside a molecule that triggers the molecule's distinctive chemical processes. No matter how the rest of a molecule is made up, the very same functional group would experience the same or a similar set of chemical events.
This permits the design of synthetic chemistry as well as the methodical forecasting of chemical reactions as well as the behaviour of chemical molecules. Other functional groups close by can affect a functional group's reactivity. Retrosynthetic analysis can be used to design organic synthesis by using functional group interconversion. The functional group found in an alcohol is Hydroxyl .
Therefore, the correct option is option D.
To know more about functional group, here:
https://brainly.com/question/29263610
#SPJ7
which of the following measurements is equivalent to 5.461x10^-7m?
Answer:
B. 0.0000005461m
I used the method of moving the decimal.
Hydrogengasand oxygengas react to form water vapor. Suppose you have of and of in a reactor. Calculate the largest amount of that could be produced. Round your answer to the nearest .
The question is incomplete. The complete question is :
Hydrogen [tex](H_2)[/tex] gas and oxygen [tex](O_2)[/tex] gas react to form water vapor [tex](H_2O)[/tex]. Suppose you have 11.0 mol of [tex]H_2[/tex] and 13.0 mol of [tex]O_2[/tex] in a reactor. Calculate the largest amount of [tex]H_2O[/tex] that could be produced. Round your answer to the nearest 0.1 mol .
Solution :
The balanced reaction for reaction is :
[tex]$2H_2(g) \ \ \ \ + \ \ \ \ \ O_2(g)\ \ \ \rightarrow \ \ \ \ 2H_2O(g)$[/tex]
11.0 13.0
11/2 13/1 (dividing by the co-efficient)
6.5 mol 13 mol (minimum is limiting reagent as it is completely consumed during the reaction)
Therefore, [tex]H_2[/tex] is limiting reagent. It's stoichiometry decides the product formation amount from equation above it is clear that number of moles for [tex]H_2O[/tex] will be produced = number of moles of [tex]H_2[/tex]
= 11.0 mol
The correct geometry around oxygen in CH3OCH3 is
(a). linear. (b). bent. C). tetrahedral/(a). trigonal planar
Explanation:
the force of the lone pairs from the bottom would cancel out the force of the lone pairs from the top. Thus, the molecule will be linear.
Congratulations! You are now the head biologist at the local "Cells and Bells" research lab! It has come to other cell biologists' attention recently that some cells are too small to contain all of the organelles inside of them. They decide that it's best to get rid of an organelle, but they're not sure which one. In the first process of this decision, they need to know "which organelle is the most important?"
Your job, as the head cell biologist, is to decide which organelle the cell cannot live without.
Write a research paper (intro, body, and conclusion) on which organelle is the most important and why.
What did Millikan discover
Answer:
Robert Millikan was a physicist who discovered the elementary charge of an electron using the oil-drop experiment
Answer:
the mass of an electron using the Oil-Drop experiment.
Explanation:
Gaseous methane (CH4) will react with gaseous oxygen (O2) to produce gaseous carbon dioxide (CO2) and gaseous water . Suppose 2.73 g of methane is mixed with 6.7 g of oxygen. Calculate the maximum mass of water that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
3.8g of H2O are produced
Explanation:
The balanced reaction of the problem is:
CH4 + 2O2 → CO2 + 2H2O
Where 1 mole of CH4 reacts with 2 moles of O2
To solve this question we need to find, as first, the moles of each reactant in order to find limiting reactant. With limiting reactant we can find the moles of H2O produced and its mass as follows:
Moles CH4 - 16.04g/mol-
2.73g * (1mol/16.04g) = 0.170 moles CH4
Moles O2 -32g/mol-
6.7g (1mol/32g) = 0.209 moles O2
For a complete reaction of 0.170 moles of CH4 are needed:
0.170 moles CH4 * (2 mol O2 / 1mol CH4) = 0.340 moles O2
As there are just 0.209 moles of O2, oxygen is limiting reactant
The moles of water produced are:
0.209 moles O2 * (2mol H2O / 2mol O2) = 0.209 moles H2O
Mass water -Molar mass: 18.01g/mol-
0.209 moles H2O * (18.01g/mol) = 3.8g of H2O are produced
Which of the following are examples of single replacement reactions? Select all that apply.
Answer:
Na2S(aq)+Cd(No3)2(aq)=CdS(s)+2NaNo3(aq)
Answer: it’s checkbox 2&3
Calculate the enthalpy change for the reaction of hydrogen and chlorine using the bond energies below.
"BOND." " BOND ENERGY "
H-H. 436
CL-CL. 242
H-CL. 431
Answer:
final-intial temperature= enthalpy change
Heating water makes most solids in it
soluble, and it makes gases
soluble.
Increasing the pressure on a gas above water makes the gas
soluble. Compounds with comparatively stronger ionic bonds are
soluble.
Answer:
1. more
2. less
3. more
4. less
Explanation:
Evaluate the exponential expression (−2)6.
A general exponential expression is something like:
A^n
This means that we need to multiply the number A by itself n times.
Using that we will get (-2)^6 = 64
With that definition, we can rewrite:
(-2)^6 = (-2)*(-2)*(-2)*(-2)*(-2)*(-2)
So we just need to solve the above expression.
Also, remember the rule of signs:
(-)*(-) = (+)
We will get:
(-2)*(-2)*(-2)*(-2)*(-2)*(-2) = [(-2)*(-2)]*[(-2)*(-2)]*[(-2)*(-2)]
= 4*4*4 = 16*4 = 64
Then we got:
(-2)^6 = 64
If you want to learn more, you can read:
https://brainly.com/question/17172630
Give the amino acid sequence in the following tetrapeptide using both 3-letter and 1-letter abbreviations for the amino acids. (Capitalize amino acid abbreviations appropriately.) ball
Answer:
ggggggggggggg
Explanation:
gggggggggggthyjum
How is a light bulb related to radiation?
A. Light bulbs do not have anything to do with radiation.
B. A light bulb emits radiation when its filament is burned out and can longer emit light. This makes it important to remove dead lightbulbs as soon as they wear out.
C. As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.
D. The light emitted by a light bulb is a form of radiation that occurs when the filament heats up and its thermal emission gains enough energy to move into the visible spectrum.
Answer:
As light is emitted from the filament, the energy in the metal is replaced as lightbulbs absorb background radiation. This prevents the filament from burning out quickly but the radiation cannot be used as power so electricity is still required for the lightbulb to work.
If you add a solution of NaOH to a solution of H₂CO₃, two reactions occur, one after the other. Write the chemical equations for these two reactions. (Hint: NaOH dissociate into Na+ and OH-, and the hydroxide ion is the actual base).
We have a solution of NaOH and H₂CO₃
First, NaOH will dissociate into Na⁺ and OH⁻ ions
The Na⁺ ion will substitute one of the Hydrogen atoms on H₂CO₃ to form NaHCO₃
The H⁺ released from the substitution will bond with the OH⁻ ion to form a water molecule
If there were to be another NaOH molecule, a similar substitution will take place, substituting the second hydrogen from H₂CO₃ as well to form Na₂CO₃
In water, a substance that ionizes completely in solution is called a
Answer:
please mark me brainliest
Explanation:
In water, a substance that ionizes completely in solution is called a weak electrolyte.
Answer: strong electrolyte.
Explanation: In water, a substance that ionizes completely in solution is called a. a. weak electrolyte.
g Identify the process in which the entropy increases. Group of answer choices a decrease in the number of moles of a gas during a chemical reaction the phase transition from a gas to a liquid the phase transition from a solid to a gas freezing water
Answer:
phase transition from a solid to a gas
Explanation:
Entropy refers to the degree of disorderliness in a system. The more disorderly a system is, the greater the entropy of the system.
Decrease in the number of moles of a gas decreases the entropy of the system. Similarly, the entropy of solids is less than that of liquids. The entropy of liquids is less than that of gases.
Therefore, a change of phase from solid to gas represents an increase in entropy of the system.
17. According to Newton's first law, an object in motion will stay in what kind of
motion as long as the net forces acting on it are zero?
A. slowing motion in a straight line
B. accelerating motion in a straight line
C. constant motion in a straight line
D. constant motion in an unpredictable direction
Answer:
C
Explanation:
According to Newton's first law, an object in motion will stay in motion unless acted upon by an unbalanced force. The option which gives the same meaning is :
constant motion in a straight lineAccording to Newton's first law, an object in motion as long as the net forces acting on it are zero will stay in:
C. constant motion in a straight line
A constant motion in mechanics is a number that remains constant throughout the motion, effectively placing a restriction on the motion.
What is Newton's first law of motion?The foundation of classical mechanics is made up of the three laws of motion that Newton suggested. These three physical laws. In accordance with the three laws of motion, a body's connection to the forces operating on it and the motion that resulted from those forces are both described. As Galileo's law of inertia, Newton's First Law of Motion is also referred to. If a body is not forced by an outside force to change its condition, it will remain in its state of rest or uniform motion in a straight line. As a factor that has the potential to alter an object's condition, the law defines force and mentions it.In this way, Newton uses the inertia of rest, motion, and direction to describe his first law of motion.A body has an attribute called inertia that makes it resist changes to its state. A body's inertia of translational motion is measured by its mass.To learn more about Newton's first law of motion, refer to:
https://brainly.com/question/974124
#SPJ2
Which of the following is an example of a scientific theory?
Matter can be neither created nor destroyed.
Force equals mass times acceleration.
Matter behaves the way it does because it is made of atoms.
There is probably life on Mars.
C. Matter behaves the way it does because it is made of atoms.
Answer:
Matter can neither be created nor destroyed
Explanation:
Mark me. as brainliest
Which of the following substances can be used to neutralize HF?
A: HF
B: SO2
C: HCI
D: NaOH
Answer:
option (D) NaOH is right answer
A neutralization reaction is "a reaction in which an acid and a base react to form water and a salt and involves H+ ions and OH- ions to produce water.
What is an acid?An acid is "any hydrogen-containing substance that is capable of donating a proton or hydrogen ion to another substance".
What is base?Base is "a substance that gets dissociated in an aqueous solution to form hydroxide ions OH-".
Hence, NaOH can be used to neutralize HF.
To learn more about Neutralization reaction here
https://brainly.com/question/24367029
#SPJ2
A functional group introduces heteroatoms into a carbon chain to increase
polarity.
chain length.
molecular mass.
reactivity.
Answer:
reactivaty
Explanation:
here you go for the answer
