Answer:
a weighing balance, a measuring cylinder, a spatula, a beaker/flask, and a stirrer
Explanation:
The lab apparatus that would be needed to prepare a solution of sodium chloride would be a weighing balance, a measuring cylinder, a spatula, a beaker/flask, and a stirrer.
The weighing balance would be used to weigh out the required amount of sodium chloride. The beaker or flask would be placed on the weighing balance and its weight zeroed. The spatula would then be sued to take out the sodium chloride from its container into the beaker till the required amount is reached. The measuring cylinder would then be used to measure out the required volume of water which would be added to the salt in the beaker. The stirrer would then be used to stir the mixture in order for the salt to dissolve.
On hot days, you may have noticed that potato chip bags seem to “inflate”, even though they have not been opened. If I have a 250 mL bag at a temperature of 19 0C, and I leave it in my car which has a temperature of 600 C, what will the new volume of the bag be? will give brainliest
The new volume of the bag : 747.43 ml
Further explanationCharles's Law
When the gas pressure is kept constant, the gas volume is proportional to the temperature
[tex]\tt \dfrac{V_1}{T_1}=\dfrac{V_2}{T_2}[/tex]
V₁=250 ml
T₁=19+273=292 K
T₂=600+273=873 K
[tex]\tt V_2=\dfrac{V_1.T_2}{T_1}\\\\V_2=\dfrac{250\times 873}{292}\\\\V_2=747.43~ml[/tex]
Help as fast possible I’ll mark you bbrainlist
Answer:
the farther they are the longer there cycle is. closer they are shorter time.
The size of an atom would be described in _______.
Answer:
atomic radius
Explanation:
so radius
Answer:
Explanation:
The average size of an atom is about 100 picometers or one ten-billionth of a meter. Almost all of the mass of an atom is in its nucleus; almost all of the volume of an atom is occupied by electrons. The number of protons (also known as its atomic number) determines the element. Varying the number of neutrons results in isotopes.
Which organelle captures sunlight and helps in food synthesis?
Answer:
Chloroplasts! :)
Explanation:
Hope this helps
Which statement about the alkali metals is correct?
A. They are usually gases.
B. They are extremely unreactive.
C. They are located in the left-most column of The Periodic Table
D. They form negative ions with a -1 charge
Answer:
its c they are located in the left most column of the periodic table
A coffee cup calorimeter contains 153.21 g of water at 22.50 °C. A 65.454 g piece of iron is heated to 101.62 °C. The piece of iron is added to the coffee cup caloriemter and the contents reach thermal equilibrium at 25.68 °C. The specific heat capacity of iron is 0.449 Jg·K and the specific heat capacity of water is 4.184 Jg·K. How much heat, , is lost by the piece of iron?
Answer:
Q = 2232J
Explanation:
In the system, the energy that is lost by the iron is:
Q = S*ΔT*m
Where Q is heat, S is specific heat of iron ΔT is change in temperature and m is mass of the piece of iron.
S = 0.449J/gK
ΔT = 101.62°C - 25.68°C = 75.94°C
m = 65.454g
Q = 0.449J/gK*75.94°C*65.454g
Q = 2232J
Which two of the minerals shown have a metallic luster?
Answer:
A and D
Explanation:
Answer:
A & D
Explanation:
boron phosphite
Formula please help fast please please help me please please help
Answer: The formula for boron phosphite is BP
Explanation:
The answer would be BP
Hope this helped!
How does the ionosphere help radio transmission?
Explanation:
ionosphere can reflect radio waves directed into the sky back toward the Earth
identify the element present in the following compound zinc chloride
Answer:
Zinc Chloride: ZnCl2
Molar Mass: 136.315 grams per mole
Density: 2.907 grams per cubic centimetre
Melting Point: 563 K (290oC)
Boiling Point: 1005 K (732oC)
Explanation:
Brainliest please?
Write a essay on endangered animals
A: Inquiring and analysing
i. explain and justify the need for a solution to a problem
ii. state and prioritize the main points of research needed to develop a solution to the problem
iii. describe the main features of an existing product that inspires a solution to the problem
iv. present the main findings of relevant research
B: Developing ideas
i. develop a list of success criteria for the solution
ii. present feasible design ideas, which can be correctly interpreted by others
iii. present the chosen design
C: Creating the solution
i. outline a plan, which considers the use of resources and time, sufficient for peers to be able to follow to create the solution
ii. demonstrate excellent technical skills when making the solution
iii. follow the plan to create the solution, which functions as intended
iv. list the changes made to the chosen design and plan when making the solution
D: Evaluating
i. outline simple, relevant testing methods, which generate data, to measure the success of the solution
ii. outline the success of the solution against the design specification
iii. outline how the solution could be improved
iv. outline the impact of the solution on the client/target audience
I WILL IDMEADIITLY MARK U AS BRAINLIESTTT
Answer:
WHATS OOP Lucy???
Separate the following gene sequence into codons: TACGTCTTACGCTATGTC
Answer really quick plssss
Answer:
I think it's AUGCAGAAUGCGAUACAG
Convert 2.5x10^6mm to km
Answer:
2.5 kilometers
Explanation:
In sexual reproduction, a genetic mutation can ONLY be passed down to the offspring if it occurs in the sex cells.
True
False
what describes a property of all elements
Intermolecular forces do not have any effect on determining the physical properties of
substances such as surface tension and melting point.
True or false
Answer:
False
Explanation:
The physical properties of melting point, boiling point, vapor pressure, evaporation, viscosity, surface tension, and solubility are related to the strength of attractive forces between molecules. These attractive forces are called Intermolecular Forces.
help help help plsss
Answer:
4.58×10^3
3.72×10^7
Explanation:
3.8×10^2 =380
+ 4.2×10^3=4200
= 4580 = 4.58×10^3
Which of the following statements is FALSE?
H2SO4 + 2 NaOH → Na2SO4 + 2 H2O is a double replacement reaction
2 KClO3 →KCl + 2 O2 is a decomposition reaction.
C6H12 + 9 O2 → 6 H2O + 6 CO2 is a single replacement reaction
CO2 + Na2O → Na2CO3 is a synthesis reaction
Answer: ITS FALSE
ExplaC6H12 + 9 O2 → 6 H2O + 6 CO2 is a single replacement reaction
nation:
What is the amplitude ?
Answer: The amplitude is a measure of the strength or intensity of the wave
Explanation: when looking at a sound wave, the amplitude will measure the loudness of the sound.
In the Periodic Table, the vertical columns that extend down the Periodic Table are called
A. periods.
B. Groups.
C: Classes
D: Rows
Answer:
b
Explanation:
Which element has an electron configuration that ends in the fourth energy 1 point
level? *
D
ОО
C
Answer:
here
Explanation:
which is the halogen that is in Period 5? a. iodine (I) b. strontium (Sr) ... 4. Which is a transition element with five d-block electrons in energy level 4? ... Which region contains elements with an electron configuration that ends with p3? a. A b.
Missing: point | Must include: point
What is specific heat? How are the factors affecting it?
Answer:
Specific heat, ratio of the quantity of heat required to raise the temperature of a body one degree to that required to raise the temperature of an equal mass of water one degree.
Explanation:
by dividing the heat capacity by the quantity of substance in a body, the resulting specific heat capacity is a function of the structure of the substance itself. In particular, it depends on the number of degrees of freedom that are available to the particles in the substance, each of which type of freedom allows substance particles to store thermal energy.
Convert 48.5 grams of water to moles of water
Answer:
2.70 mol of water.
Explanation:
divide the given mass by the molar mass of water. 48.5 / 18.016g = 2.70 mol water.
What is the speed of a car that has traveled 100 miles in 20 hours?
|
Answer:
5 mph
Explanation:
100 miles, 20 hours (divide by 2)
50 miles, 10 hours (divide by 2)
25 miles, 5 hours (divide by 2)
divide both sides by 5
5 miles, 1 hour
Answer:2
Explanation:
A roller coaster is accelerating at 10m/s² before it comes to an abrupt stop at the end of the ride. The mass of the roller coaster is 900 kg. How much force was exerted on the roller coaster to bring it to a stop?
Answer:
9000 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 900 × 10
We have the final answer as
9000 NHope this helps you
A mixture consists of 28% oxygen, 14% hydrogen, and 58% nitrogen by volume. A sample of this mixture has a pressure of 4.0 atm in a 9.6 L container at 300 K temperature. This mixture is run through a gas filter, which removes the hydrogen from this system. The gas is placed back into the 9.6 L container. How many moles of gas are left in the container? A) 4.2 mol B) 2.6 mol C) 1.3 mol D) 3.9 mol
Answer:
C) 1.3 mol
Explanation:
Using gas law we can find the initial moles of the sample of the mixture, as follows:
PV = nRT
PV / RT = n
Where P is pressure: 4.0atm
V is volume: 9.6L
R is gas constant: 0.082atmL/molK
T is absolute temperature: 300K
And n are moles of the gas
PV / RT = n
4.0atm*9.6L / 0.082atmL/molK300K = n
n = 1.56moles of the mixture of the gas are present into the 9.6L container
Now, 14% of this gas is hydrogen that was removed of the system, that is:
1.56mol*14% = 0.22 moles of hydrogen are removed.
Thus, moles of gas that remains in the container are:
1.56mol - 0.22mol = 1.34mol.
Right answer is:
C) 1.3 molAnswer:
C = 1.3
Explanation:
I just took the exam and got it right.
What is a reaction rate? PLEASE HELP
a. measure of the potential energy differences in reactants and products
b. measure of the activation energy needed
c. measure of how fast products are made
d.measure of collisions between molecules
Answer:
c
Explanation:
Reaction rate, in chemistry, the speed at which a chemical reaction proceeds.if you're studying the same thing I am then that would be it
Ples help is it Fission, Fusion, or Both 1. Incredibly high amounts of energy are released. ____ 2. Results in a nuclear change. ______ 3. The end product is heavier. _____ 4. Two nuclei become one. ____ 5. The end product is lighter. ____
Answer:
1. fission
2. both
3. fusion
4. fusion
5. fission
Explanation:
Fission refers to the splitting of a single nucleus into two or more small nuclei while fusion refers to the combination of two or more small nuclei into one heavy nucleus.
When a single heavy nucleus splits, energy is released and the end products are 2 or more lighter nuclei. On the other hand, when several light nuclei fuse into one nucleus, energy is absorbed and the end product is one heavy nucleus. Both fission and fusion result in a nuclear change.
The atmosphere insulates the planet by trapping in
Which is a compound?
A. Orange and black shirts in a drawer
B. An alloy of copper and iron
C. Silicon and carbon in a molecule
D. A copper statue
please help, on a pex ! brainliest and an extra 50 points if right
Explanation:
c Silicon and carbon in a molecule
