tea contains approximately 2% caffeine by weight. assuming that you started with 18g of tea leaves, calculate your percent yield of extraced caffeine

Answer:

The net ionic equation shows the actual reaction more clearly and closer to reality because it writes soluble ionic compounds as the ions and then cancel the spectator ions not involved in the chemical reaction . The net ionic equation results shows the actual chemical reaction taking place.

The net ionic equation for for 2AgF(aq) + k₂S = Ag₂S (s) + 2KF(aq) will be; 2 Ag⁺(aq) + S²⁻(aq) → Ag₂S(s).

To write the net ionic equation for the reaction, we first need to write the balanced molecular equation and then convert it into the ionic equation before finally identifying the net ionic equation.

Write the balanced molecular equation:

2 AgF(aq) + K₂S(aq) → Ag₂S(s) + 2 KF(aq)

In this reaction, silver fluoride (AgF) reacts with potassium sulfide (K₂S) to produce silver sulfide (Ag₂S) and potassium fluoride (KF).

Write the complete ionic equation:

In the complete ionic equation, we separate all the aqueous species (dissociated ions) into their individual ions. Only the solid (s) and gas (g) compounds remain unchanged.

2 Ag⁺(aq) + 2 F⁻(aq) + 2 K⁺(aq) + S²⁻(aq) → Ag₂S(s) + 2 K⁺(aq) + 2 F⁻(aq)

Identify the spectator ions and then write the net ionic equation:

The spectator ions are the ions that do not participate in the actual chemical reaction and remain the same on both sides of the equation. In this reaction, the potassium ions (K⁺) and fluoride ions (F⁻) are spectator ions because they appear on both sides of the equation unchanged.

Net ionic equation:

2 Ag⁺(aq) + S²⁻(aq) → Ag₂S(s)

The net ionic equation shows only the species that actively participate in the chemical reaction. In this case, the silver ions (Ag⁺) and sulfide ions (S²⁻) are the ones involved in forming the silver sulfide (Ag₂S) precipitate.

To know more about net ionic equation here

https://brainly.com/question/34257815

#SPJ3

--The given question is incomplete, the complete question is

"Write the net ionic equation for this reaction. 2AgF(aq) + k₂S = Ag₂S (s) + 2KF(aq)."--

Answer:

welcome to mobile legends

Explanation:

ml ka muna maya kana mag module

Answer:

1860g.

Explanation:

It is known that the molar mass of C2H6O2 is 62.08 g/mol.,

Now to  solve for the number of moles of solute, one must multiply both

sides by the volume:

moles of solute = (6.00 M)(5.00 L) = 30.0 mol

Notice since the definition of molarity is mol/L, the

product M × L gives mol, a unit of amount.

Use the molar  mass of C3H8O3, one can convert mol to g:

Mass m =30 mol × 62.08 g/mol

m = 1860g.

Hence, there are 1,860 g of C2H6O2 in the specified amount of

engine coolant.

Answer:

0.000731 grams aluminium sulfate

46.0 mols ammonia

Explanation:

ALS = shorthand for aluminium sulfate which has a molar mass of 342.15 g/mol

[tex]ALS: \frac{0.250mols}{1} *\frac{1g}{342.15mols} = \frac{0.250g}{342.15}=0.0007307 g[/tex]

NH3 has a molar mass of 17.031 g/mol

[tex]NH3: \frac{2.70g}{1} *\frac{17.031mols}{1g} = \frac{0.250g}{342.15}=45.9837 mols[/tex]

Aluminium sulphate (AlS) whose molar mass is= [tex]\sf{ 342.15\dfrac{g}{mol} }[/tex]

we have to find the 0.250 moles of aluminum sulphate.

[tex]\implies AlS=\dfrac{1g}{342.15~mole}×0.250~mole \\\\\implies AlS=\dfrac{0.250}{342.15}\\\\\implies \dfrac{\frac{250}{1000}}{\frac{34215}{100}}\\\\\implies \dfrac{250}{1000}×\dfrac{100}{34215}\\\\=0.00073067\approx{0.0007307~g}[/tex]

[tex]\\\\\\[/tex]

Ammonia(NH3) whose molar mass is =[tex]\sf{17.031\dfrac{mol}{g} }[/tex]

We have to find 2.70 grams of ammonia

[tex]\implies NH_{3}=\dfrac{17.031~mol}{1g}×2.70g\\\\ 17.031×2.70\\\\\dfrac{17031}{1000}×\dfrac{270}{100}\\\\ \dfrac{4598370}{100000}\\\\=45.9837\approx{46~mole}[/tex]

Answer:

0.50 g Caffeine

Explanation:

Step 1: Given data

Concentration of caffeine by weight in tea leaves: 5.0%

Mass of tea leaves: 10. g

Step 2: Calculate the maximum weight of caffeine that can be isolated

The concentration of caffeine by weight in tea leaves is 5.0%, that is, there are 5.0 g of caffeine per 100 g of tea leaves. The maximum weight of caffeine in 10. g of tea leaves is:

10. g Tea leaves × 5.0 g Caffeine/100 g Tea leaves = 0.50 g Caffeine

Answer:

a. True

Explanation:

There is strong inhibition of Carbon Anhydrase by Aceta-zolamide Carbonic Anhydrase. The drug acetazolamide is used as diuretic which increase the urine production in human body. It lowers pressure in eye in glaucoma.

Answer:

Lewis base/electron pair donors

Explanation:

Ligands are ions or neutral molecules which bond together with a central ion. They act as election pair donors, also known as Lewis bases, while the central ion they are connected to acts as the acceptor.

Therefore, a ligand is a molecule or ion that acts as a Lewis base/electron pair donors

Answer:

please translate in english

Answer:

carbohydrate, 6, a carbonyl, disaccharide

Explanation:

Fructose is an example of a ketohexose. The -hexose part of the name indicates that fructose is a carbohydrate that contains 6 carbons. There are more isomers that are ketohexoses.

The keto- part of the name indicates that fructose contains a carbonyl functional group. In ketones, the carbonyl is in an inner carbon.

Fructose can combine with glucose to form sucrose. Therefore, sucrose is a disaccharide. Disaccharides are formed by the bonding of 2 monosaccharides.

Explanation:

since there are no lone pairs on the central atom, the shape will be tetrahedral

Answer:

Please find the complete solution in the attached file.

Explanation:

Answer:

A. 3-chloro-1-methylcyclobutane.

Explanation:

Hello there!

In this case, according to the given information, it turns out possible for us to infer that the name of this compound is A. 3-chloro-1-methylcyclobutane because of the fact that the parent chain is a cyclobutane which starts by the methyl radical as it has the priority over the chlorine radical which is actually named first at the third carbon (clockwise).

Therefore the name is given in A, accordingly to the IUPAC rules of nomenclature.

Regards!

Answer:

Mass=Moles × RFM

Mass= 0.28M× 164

Mass= 45.92 grammes

TRUE

Explanation:

*not sure about this answer

Answer:

Because sucrose is a complex disaccharide, it is not classified as either an aldose or a ketone. Instead, it is a compound that contains both. glucose is aldose sugar and fructose is a ketose sugar.

Answer:

The volume will be 185.83 mL.

Explanation:

Gay-Lussac's law indicates that when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases. Gay-Lussac's law can be expressed mathematically as follows:

[tex]\frac{P}{T} =k[/tex]

Where P = pressure, T = temperature, k = Constant

Boyle's law says that the volume occupied by a given gaseous mass at constant temperature is inversely proportional to pressure. Boyle's law is expressed mathematically as:

P*V=k

Where P = pressure, V = volume, k = Constant

Finally, Charles's Law consists of the relationship that exists between the volume and the temperature of a certain quantity of ideal gas, which is kept at a constant pressure. For a given sum of gas at a constant pressure, as the temperature increases, the volume of the gas increases and as the temperature decreases, the volume of the gas decreases because the temperature is directly related to the energy of the movement of the gas molecules. .

In summary, Charles's law is a law that says that when the amount of gas and pressure are kept constant, the quotient that exists between the volume and the temperature will always have the same value:

[tex]\frac{V}{T} =k[/tex]

Combined law equation is the combination of three gas laws called Boyle's, Charlie's and Gay-Lusac's law:

[tex]\frac{P*V}{T} =k[/tex]

Studying two different states, an initial state 1 and a final state 2, it is satisfied:

[tex]\frac{P1*V1}{T1} =\frac{P2*V2}{T2}[/tex]

In this case:

Replacing:

[tex]\frac{720 torr*256 mL}{308 K} =\frac{950 torr*V2}{295 K}[/tex]

Solving:

[tex]V2= \frac{295K}{950 torr} *\frac{720 torr*256 mL}{308 K}[/tex]

V2= 185.83 mL

The volume will be 185.83 mL.

Explanation:

example is copper iron...........

Answer:

a. 0.7119 g

Explanation:

To solve this question we need to know that all carbon of the compound will react producing CO2 and all Hydrogen producing H2O.

Thus, we can find the mass of C and the mass of H and by difference regard to the 2.584g of the compound we can find the mass of oxygen as follows:

Moles CO2 = Moles C -Molar mass: 44.01g/mol-

5.874g CO2 * (1mol/44.01g) = 0.1335 moles CO2 = 0.1335 moles C

Mass C -Molar mass: 12.01g/mol-:

0.1335 moles C * (12.01g /mol) = 1.6030g C

Moles H2O -Molar mass: 18.01g/mol-

2.404gH2O * (1mol / 18.01g) = 0.1335 moles H2O * (2mol H / 1mol H2O) = 0.267 moles H

Mass H -Molar mass: 1g/mol-

0.267 moles H * (1g/mol) = 0.2670g H

Mass Oxygen =

Mass O = 2.584g compound - 1.6030g C - 0.2670g H

Mass O = 0.714g O ≈

Answer:

1. Nuts

2. Canned meats and seafood

3. Dried grains

4. Dark chocolate

5. Protein powders

Answer:

CrCl₂(s) ⇒ Cr²⁺(aq) + 2 Cl⁻(aq)

Explanation:

Chromium (II) chloride is a strong electrolyte, that is, when dissolved in water, it completely dissociates into the ions. The cation is chromium (II) and the anion is chloride. The balanced equation for the solution of chromium (II) chloride is:

CrCl₂(s) ⇒ Cr²⁺(aq) + 2 Cl⁻(aq)

Answer:

the energy released is to make steam to create electricity. yes you are right i just didnt feel like being super technical

In a nuclear reaction, the  direct function of the energy released from the nuclear chain reaction in a nuclear power plant is turning the blades of the turbine heating water to produce steam .

There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.

In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.

In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.

Learn more about nuclear reactions,here:

https://brainly.com/question/12786977

#SPJ7

Answer:

.032 M .

Explanation:

Molecular weight of ammonium nitrate is 80  .

3.2 g = 3.2 / 80 moles

= .04 moles

volume = 100 mL = 0.1 L

Molarity of 100 mL solution = .04 moles / 0.1 L

= 0.4 M solution.

Now 2 mL solution of 0.4 M is diluted to a volume of 25 mL .

Using the formula S₁ V₁ = S₂V₂

0.4 M x 2 mL = S₂ x 25 mL

S₂ = .4 x 2 / 25

= .032 M

Hence required concentration is .032 M .

Answer:

c9h8o2

Explanation:

The molecule which has 9 carbon atom is [tex]C_{9} H_{8} O[/tex](cinnamaldehyde).

 More than one atoms make up a molecule. If they have more than one atom, atoms could be the same for example, an oxygen molecule contains two oxygen atoms) as well as different (for example, a hydrogen molecule contains two hydrogen atoms.

Cinnamaldehyde is a kind of organic chemical with the formula C6H5CH=CHCHO and the formula C6H5CH=CHCHO. It's mostly the trans isomer that's found in nature.

It is known that the number of carbon atom is 9 hence molecule will be cinnamaldehyde

To know more about cinnamaldehyde and molecule.

https://brainly.com/question/14897941

#SPJ2

Answer:

1569 torr

Explanation:

Assuming ideal behaviour and constant temperature, we can solve this problem by using Boyle's law, which states:

Where in this case:

We input the data given by the problem:

And solve for P₂:

Answer:

Formic acid

Sodium formiate

Explanation:

To determine acid or base that can generate a buffer solution with pH around 3.5, we have to think in the acid whose pKa = pH.

Although we have to also think in buffer capacity, a measure which can cause a change of 1 pH unit in 1 L of solution.

Buffer capacity does not only depend on the concentration of its components but also of the relationship between that concentrations.

When pH = pKa, buffer capacity is maximum which means that the concentration of conjugated species is the same and the ability to oppose pH changes is maximum.

One example with pH = pKa or nearly if:

COOH⁻  + Na⁺ →  NaCOOH

HCOOH  +  H₂O  →  COOH⁻  + H₃O⁺     Ka: 1.8×10⁻⁴

pKa = 3.74

Answer:

R.F.M of Iron (II) oxide :

[tex]{ \tt{ = (56 \times 2) + (16 \times 3)}} \\ = 160 \: g[/tex]

Moles :

[tex]{ \tt{ \frac{35.2 \times {10}^{ - 23} }{160} }} \\ = 2.2 \times {10}^{ - 24} \: moles[/tex]

Molecules :

[tex]{ \tt{ = 2.2 \times {10}^{ - 24} \times 6.02 \times {10}^{23} }} \\ = 1.3244 \: molecules[/tex]

The number of molecules of Iron(II) oxide present in 35.2 ×10⁻²³ g of Iron(II) oxide is equal to 2.95.

Avogadro’s number can be described as the proportionality constant that is used to represent the number of entities or particles in one mole of any substance. Generally, it is used to count atoms, molecules, ions, electrons, or protons, depending upon the chemical reaction or reactant and product.

The value of Avogadro’s constant can be represented as numerically approximately equal to 6.022 × 10²³ mol⁻¹.

Given, the mass of the iron oxide = 35.2 ×10⁻²³ g

The molar mass of the Iron(II) oxide, FeO = 71.84 g/mol

71.84 g of Iron (II) oxide have molecules = 6.022 × 10²³

35.2 ×10⁻²³ g of FeO have molecules = 6.022 × 10²³ × (35.2 ×10⁻²³ /71.84)

The number of molecules of FeO in a given mass = 2.95 molecules

Learn more about Avogadro's number, here:

brainly.com/question/11907018

#SPJ5

Answer: A gradual increase in the overall temperature of the earth's atmosphere generally attributed to the greenhouse effect caused by increased levels of carbon dioxide, chlorofluorocarbons, and other pollutants.

Explanation:

Answer:

Temperature affects the kinetic energy in a gas the most, followed by a comparable liquid, and then a comparable solid. The higher the temperature, the higher the average kinetic energy, but the magnitude of this difference depends on the amount of motion intrinsically present within these phases.

Explanation:

Liquids have more kinetic energy than solids. When a substance increases in temperature, heat is being added, and its particles are gaining kinetic energy. Because of their close proximity to one another, liquid and solid particles experience intermolecular forces. These forces keep particles close together.

Answer:

[tex]\boxed {\boxed {\sf 63.0 \%}}[/tex]

Explanation:

The percent yield is the ratio of the actual yield to the theoretical yield.

[tex]percent \ yield = \frac{actual \ yield}{theoretical \ yield} * 100[/tex]

We can substitute the known values into the formula.

[tex]percent \ yield= \frac{ 14.8 \ g}{23.5 \ g}*100[/tex]

Divide.

[tex]percent \ yield = 0.629787234043*100[/tex]

Multiply.

[tex]percent \ yield = 62.9787234043[/tex]

The original measurements for the theoretical and actual yields have 3 significant figures, so our answer must have the same. For the number we calculated, that is the tenths place.

The 7 to the right, in the hundredths place, tells us to round the 9 up to a 0. Since we rounded up to 0, we have to move to the next place to the left and round the 2 up to a 3.

[tex]percent \ yield \approx 63.0[/tex]

The percent yield is approximately 63.0 percent.