A natural element consists of two isotopes: Cl-35 and Cl-37. The composition of these two isotopes differs by:
Answer:
There are no options in this question, however, it can be answered based on general understanding
- The number of neutrons each isotope contain
Explanation:
Isotopes are atoms of an element with the same atomic number or number of protons but different mass number/atomic masses. Since isotopes have same proton numbers, they have similar chemical behavior or identity.
However, difference in atomic mass or mass number of the same atomic number indicates that the number of neutrons each isotope contain differs from one another. Hence, in two isotopes of chlorine given as follows: Cl-35 and Cl-37, the NUMBER OF NEUTRONS in each atom differentiates the two isotopes.
Cl-35 contains 18 neutrons while Cl-37 contains 20 neutrons.
A 10.53 mol sample of krypton gas is maintained in a 0.8006 L container at 299.8 K. What is the pressure in atm calculated using the
van der Waals' equation for Kr gas under these conditions? For Kr, a = 2.318 L'atm/mol and b = 3.978x10²L/mol.
Answer:
-401.06 atm
Explanation:
Applying,
P = (nRT/V-nb)-(an²/V²)............... Equation 1
Where P = Pressure, R = Universal gas constant, V = molar Volume, T = Temperature in Kelvin, a = gas constant a , b = gas constant b, n = numbers of mole
From the question,
Given: T = 299.8 K, V = 0.8006 L, a = 2.318 L.atm/mol, b = 3.978×10²L/mol
Constant: R = 0.0082 atm.dm³/K.mol
Substitute these values into equation 1
P = [(0.0082×299.8×10.53)/(0.8006-(10.53×397.8)]-[(10.53²×2.318/0.8006²)]
P = (25.89/-4188.0334)-(400.995)
P = -0.0618-400.995
P = -401.06 atm
PLEASE HELP ASAP!!!
Answer:
I don't know What can I do.
Consider an equilibrium (K1) that is established after 10 mL of compound A and 10 mL of compound B are mixed. Now, imagine the equilibrium (K2) where 1 mL of compound A is added to 100 mL of compound B. How are K1 and K2 related algebraically (read this question VERY carefully, at least one more time)
The equilibrium constant K₁ = Equilbrium constant K₂.
The equilibrium constant, K, of a reaction, is defined as:
"The ratio between concentration of products powered to their reaction quotient and concentration of reactants powered to thier reaction quotient".
For the reaction:
aA + bB ⇄ cC + dD
The equilibrium constant, K, is:
[tex]K = \frac{[C]^c[D]^d}{[A]^a[B]^b}[/tex]
Now, assuming the reaction of the problem is 1:1:
A + B ⇄ C + D
[tex]K = \frac{[C][D]}{[A][B]}[/tex]
The concentrations of the reactants are directly proportional to the volume added. Thus, we can assume that concentration = Volume. Replacing for K₁ and K₂:
[tex]K_1 = \frac{[C][D]}{[10mL][10mL]} = K_1 = \frac{[C][D]}{100mL^2}[/tex]
In the same way:
[tex]K_2 = \frac{[C][D]}{[1mL][100mL]} = K_2 = \frac{[C][D]}{100mL^2}[/tex]
Thus, we can say:
K₁ = K₂Learn more about chemical equilibrium in:
https://brainly.com/question/4289021?referrer=searchResults
Three important nutritional additions to training for a long distance race are
O Protein
O Water
O Increase calories
O All of the answer choices
If Sterling silver is 90.0% silver and 10.0% copper, what is the maximum amount of Sterling silver that can be made if you have 48.3 grams of silver metal and an unlimited amount of copper
Answer:
[tex]x=54g[/tex]
Explanation:
From the question we are told that:
Content of Sterling silver:
Let x be sterling silver
Silver [tex]S=0.9x[/tex]
Copper [tex]C=0.1x[/tex]
Total silver available [tex]T=48.3[/tex]
Generally the equation for Total amount to be made is mathematically given by
[tex]T=\frac{x*90}{100}[/tex]
[tex]x=\frac{48.3*100}{90}[/tex]
[tex]x=54g[/tex]
1)Consider the reactions observed when NaOH(aq) and NH3(aq) were added to the solutions containing Zn2 (aq): a)What is the identity of the precipitate formed when the NaOH(aq) and NH3(aq) were added dropwise (limited amounts added)
Answer:
A white gelatinous precipitate is observed in each case.
Explanation:
Qualitative analysis in chemistry is mostly used to identify the ions present in a sample by adding certain reagents. The observation after adding the reagent often leads to an inference.
When NaOH is added to a solution containing Zn^2+ in drops, a white gelatinous precipitate is observed.
When NH3(aq) is added in drops to a solution containing Zn^2+, a white gelatinous precipitate is also observed.
The number of organic compounds that have been reported in 2019 is more than 10 million. This is due to carbon's ability to bond to other carbon molecules, called
electron affinity.
ionic bonding.
catenation.
electronegativity.
Answer:
catenation
Explanation:
Carbon atoms have four electrons to share in bonding environments to get to the ideal octet. To do this, it bonds with other carbon molecules, called catenation. Catenation is the ability of an atom to bond and share electrons with other atoms of its kind.
The reaction between NO2 and co to produce no and CO2 is thought to occur in two steps:
Step 1: NO2 + NO2 → + NO + NO3
Step 2: NO3 + CO → NO2 + CO2
The experimental rate law is rate = k[NO2]2.
Required:
a. Write the equation for the overall reaction. do not include phase abbreviations.
b. Identify the intermediate(s).
Answer:
Correct option is
A
Explanation:
The number of molecules of CO involves in the slowest step will be 0 because CO is not involve in the slowest step i.e. rate determing step.
When cyclopentane undergo free-radical substitution with bromine (Br2 /Heat) the product:
a. Bromo cyclopentene
b. Bromo cyclopentane + HBr
c. Bromo cyclopentene + HBr
Explanation:
b. Bromo cyclopentane + HBr
oxide. b) Silicon dio
43. What is the nature of an enzyme?
a) Vitamin. b) Lipid. c) Carbohydrate. d) Protein
44. Name the enzyme which catalyzes the oxidation-reduction reaction?
a) Transaminase. b) Glutamine synthetase. c) Phosphofructokinase. d) Oxidoreductase
nontido
Answer:
43) protein
44) oxidoreductase
How can beta particles be dangerous to living cells?
A. They move fast and penetrate the skin.
B. They are very high in energy and can travel through most
materials.
C. They move slowly but are very large.
D. They are very low in energy but remain in the body for a long time.
Gu
Magnesium metal is reacted with hydrochloric acid to produce
hydrogen gas. A sample of hydrogen gas is collected over water
in a eudiometer at 28.0°C. The atmospheric pressure is 636
mmHg. Determine the pressure (in atm) of the hydrogen gas
produced
Pressure =
atm
The pressure of hydrogen gas is 607.7 mmHg
According of Dalton's law of Partial pressure, the total pressure of a mixture of gases is the sum of the partial pressures of the individual gases in the mixture.
We can now write;
The for hydrogen collected over water, we have a mixture of hydrogen gas and water vapour.
Total pressure = pressure of hydrogen gas + vapour pressure of water
Pressure of hydrogen gas = Total pressure - vapour pressure of water
Pressure of hydrogen gas = 636 mmHg - 28.3 mmHg
Pressure of hydrogen gas = 607.7 mmHg
For more information see https://brainly.com/question/14119417
Which one of the following compounds
contains ionic bonds?
a) NI3
B) HF
c) SiO2
d) CaO
Your answer is CaO.I hope that my answer helped you..
What is the mass percentage of C in CH₃CH₂OH? Provide an answer to two decimal places.
Answer:
here's your answer
Explanation:
Molar mass of CH3CH2OH = 46.06844 g/mol
This compound is also known as Ethanol.
Convert grams CH3CH2OH to moles or moles CH3CH2OH to grams
Molecular weight calculation:
12.0107 + 1.00794*3 + 12.0107 + 1.00794*2 + 15.9994 + 1.00794
Percent composition by element
Hydrogen H 1.00794 6 13.128%
Carbon C 12.0107 2 52.143%
Oxygen O 15.9994 1 34.730%
The mass percentage of C in CH₃CH₂OH is 52.14% (to two decimal places)
To calculate the mass percentage of C (Carbon) in CH₃CH₂OH (Ethanol),
First, we will determine the mass of CH₃CH₂OH
Molar mass of CH₃CH₂OH = 46.07 g/mol
Mass of C = 12.01 g/mol
Now, for the mass percentage of C in CH₃CH₂OH,
We will determine the ratio of the total mass of C to the mass of CH₃CH₂OH, and then multiply by 100%
Since we have 2C in CH₃CH₂OH
Then, total mass of C in CH₃CH₂OH = 2 × 12.01 g/mol = 24.02 g/mol
That is,
Mass percentage of C in CH₃CH₂OH = [tex]\frac{24.02}{46.07} \times 100\%[/tex]
Mass percentage of C in CH₃CH₂OH = 0.5213805 ×100%
Mass percentage of C in CH₃CH₂OH = 52.13805%
Mass percentage of C in CH₃CH₂OH ≅ 52.14%
Hence, the mass percentage of C in CH₃CH₂OH is 52.14% (to two decimal places)
Learn more here: https://brainly.com/question/24712044
how is the akin of frog similar to a fish
Answer:
Have you ever touched a fish? Most fish will feel a bit rough - due to their scales. Some, like sharks, will feel like sandpaper. Even fish with small, smoother scales will feel a bit like that. Amphibians don’t have scales, and most species will be wet to some degree - they have to keep their skin moist or they’ll die. A few groups, like toads and newts, have rougher skin, which is heavier and thicker, which allows them to retain moisture better away from water.
Functionally, the big thing about amphibian skin is that it is semi-permeable. Amphibians can breathe through their skin - all amphibians can get some oxygen through their skin, but some species of salamanders get all their oxygen that way - they have no lungs or gills. The skin can also allow water in - sort of like a paper towel. The bad thing is that other chemicals can pass through the skin, too - pollutants and other chemicals tend to affect amphibians far more than they do other groups.
Amphibians also shed their skin - fish do not. People don’t tend to see frogs shedding their skin often, though, since they eat it to regain nutrients and other resources in the skin.
Finally, since amphibian skin offers no defense against predators in the way that scales do, and limited barrier against disease the way non-amphibian skin does (shedding helps), the skin of many amphibians contain toxins, and some of them have anti-fungal properties (typically due to symbiotic bacteria). Many species have evolved chemical defenses in the skin, while others have glands that produce toxins that can be secreted outside of the skin.
The skin can withstand dessication more than the fish.
They have moist skin used as respiratory surface during deep sleep / hibernation.
They have moist skin due to secretion of mucus by glands under the skin.
please mark me as brainliest
The condensation of chromosomes is inducted in?
Answer:
Chromosome condensation, the landmark event at the onset of prophase, often begins in isolated patches of chromatin at the nuclear periphery. Later, chromosome condense into two threads termed sister chromatids that are closely paired along their entire lengths.
Explanation:
hope dis help & may I have brainly plz
. Which of the following statement is not related to a chemical reaction ? A. New substances are formed B. Atoms of the elements transform into atoms of other elements C. The properties of the new substances will be different D. There will be bond breaking and bond forming
Answer:
the answer should be B because elements do not tranform into other elements in a chemical reaction
am I right please?
What is molarity?
A. A measure of saturation.
B. A ratio of moles of solvent to moles of solution.
C. A measure of moles.
D. A measure of concentration.
Answer:
Molarity is a measure of concentration
I Hope its right if not so advance sorry :)
The molarity measures the number of moles of the solute present per liter of the solution and it measures the concentration of the solution. option D is correct.
What is molarity?Molarity is the amount or the number of moles present in per liter of the solution it is the unit to measure the concentration of the moles.
Unit of molarity will be moles per liter and the temperature does not affect the molarity of the solution. molarity can be calculated by dividing the concentration of the solution by the molar mass of the given element.
molarity = weight / mass × 1000/ volume in liters.
With the help of this formula, we can calculate the molarity.
Therefore, molarity measures the number of moles of the solute present per liter of the solution and it measures the concentration of the solution. option D is correct.
Learn more about molarity, here:
https://brainly.com/question/15532279
#SPJ2
Cho các quá trình và số liệu sau:
C(d,s) ⭢ C (g,s) (1) : ΔH0298 = - 1,9 kJ
ΔG0298 = - 2,87 kJ
C(g,s) + O2 (k) ⭢ CO2 (k) (2): ΔH0298 = - 393,5 kJ
a)Giải thích tại sao trạng thái chuẩn của C lại là C(g) mà không phải là C (d).
b)Tính ΔH0298 của phản ứng sau:
C(d,s) + O2 (k) ⭢ CO2 (k) (3)
ΔH0298 của phản ứng 3 có phải là ΔH0298, sinh nhiệt của CO2 không ? Tại sao?
Answer:
rrgggf in the world of the world of the world of the up the good morning I will take a user and pass it on the
Complete the following nuclear equations. I recommend filling in the atomic number below each symbol. Instead of using superscripts in our answers, put each answer in the corresponding box. A). 54Fe 4He --> 2 1n _____
Answer:
gamma ray
Explanation:
2- . the number of waves in n *10 bohr's orbit are
Compare and contrast the quantum mechanical model and Niels Bohr of the atom
Answer:
the quantum mechanical model VS. Neils Bohr of the atom
Explanation:
The Bohr model and quantum model are models that explain the structure of an atom. ... The key difference between Bohr and quantum model is that Bohr model states that electrons behave as particles whereas quantum model explains that the electron has both particle and wave behavior.
In the reaction HCI + NH4OH --> NH4CI+H2O, which compound has an element ratio of 1:4:1?
H2O
NH4Cl
HCI
ΝΗ4ΟΗ
The compound in this reaction which is having the elemental ratio of 1:4:1 is NH₄Cl where nitrogen and chlorine are of one mole each with 4 hydrogens.
What is elemental ratio?Elemental ratio of a compound is the ratio of number of atoms of each elements in that compound. The elemental ratio can be determined from the molecular formula of compounds.
The given reaction is a double displacement reaction. Here, the Cl group is replaced to the ammonia and OH group is replaced to the water. Thus, two species is replaced in the reaction.
In NH₄Cl, there are one nitrogen, 4 hydrogens and one chlorine atom. Therefore, the elemental ratio of the compound is 1:4:1. The elemental ratio of water is 2:1 and HCl is 1:1 and that in NH₄OH is 1:5:1. Hence, option b is correct.
To find more on elemental ratio, refer here:
https://brainly.com/question/17613193
#SPJ2
.formular for Charles' law
Explanation:
Hey there!
Charles law states that the volume of gas is directly proportional to the absolute temperature at constant pressure.
As the fact is, at a constant pressure the volume of fix amount of dry gas is directly proportional to absolute temperature from Charles law.
Since V and T are directly varying directly, we can write the equation using constant "k".
V/T = k
In this case the value of k depends on the pressure of gas, the amount of gas and also unit volume.
V/T = k .........(i)
Let us consider V1 and T1 the Volume and temperature of the ideal gases.
Then the equation is;
V1/T1 =k........(ii)
After this let change the temperature and volume be T2 and V2, respectively.
Then the equation is:
V2/T2 = k.......(iii)
Now; Equating equation (ii) and (iii)…
V1/T1 = V2/T2
So, this the formula. (i.e V1/T1 = V2/T2).
Hope it helps!
Benzoyl chloride undergoes hydrolysis when heated with water to make benzoic acid. Reaction scheme of benzoyl chloride with water and heat over the arrow, and benzoic acid and hydrochloric acid as products. Calculate the molar mass of the reactant and product. Report molar masses to 1 decimal place.
Answer:
The molar mass of benzoic acid is 122.1 g/mol
The molar mass of hydrochloric acid = 36.5 g/mol
Explanation:
Benzoyl chloride is an organic compound with the molecular formula C₆H₅COCl. It is an acyl chloride since is it an organic derivative of a carboxylic acid. Acyl chlorides have the general molecular formula, R-COCl, where R is a side chain.
The R group of benzoyl chloride is the benzyl group C₆H₅. It reacts with water (hydrolysis) to produce hydrochloric acid and benzoic acid. The equation of the reaction is given below:
C₆H₅COCl + H₂O → C₆H₅CO₂H + HCl
The molar mass of benzoic acid as well as of hydrochloric acid is calculated from the sum of the masses of the atoms of the elements present in the compound thus:
Molar mass of carbon = 12.0107 g
Molar mass of hydrogen = 1.00784 g
Molar mass of oxygen = 15.999 g
Molar mass of chlorine = 35.453 g
Molar mass of benzoic acid, C₆H₅CO₂H containing 7 moles of atoms of carbon, 6 moles of atoms of hydrogen and 2 moles of atoms of oxygen = 7 × 12.0107 + 6 × 1.00784 + 2 × 15.999 = 122.1 g
Therefore, the molar mass of benzoic acid is 122.1 g/mol
Molar mass of hydrochloric acid, HCl, containing 1 mole of atoms of hydrogen and 1 mole of atoms of chlorine = 1 × 1.00784 + 1 × 35.453 = 36.5 g
Therefore, the molar mass of hydrochloric acid = 36.5 g/mol
The Lewis dot model of a molecule is shown.
Based on the model, which of the following is true?
Each carbon has three lone pairs of electrons on it.
The octet of carbon atom remains incomplete in the molecule.
The two carbon atoms share a total of six electrons with each other.
The difference between the electronegativity of carbon and hydrogen is greater than 1.7.
Answer:
The two carbon atoms share a total of six electrons with each other.
Explanation:
Looking at the structure of the molecule H-C≡C-H as shown in the question, we will notice that there exists a triple bond between the two carbon atoms.
Each bond between the two carbon atoms represents two electrons shared. Since there are three bonds between the two carbon atoms, then a total of six electrons were shared between the two carbon atoms hence the answer chosen above.
2. An ion is a charged particle that is formed when
a. An atom gains electrons
b. An atom loses electrons
c. Both A and B
d. None of the above
The correct answer is option c. Both A and B: An ion is a charged particle that is formed when an atom gains electrons or an atom loses electrons.
First you need to know the definition of ion. An ion is a molecule or atom that has a positive or negative electrical charge.
That is, an ion is an atom whose electric charge is not neutral. This charged particle can be positive or negative.
Ionization is the chemical or physical process by which ions are produced. In this process, negatively charged ions are produced by gaining electrons and are known as anions.
The positively charged are produced by the loss of electrons and are known as cations.
In summary, an ion is a charged particle that is formed when an atom gains electrons or an atom loses electrons, and they are known as cations and anions respectively.
The correct answer is both A and B.
Learn more about ions:
https://brainly.com/question/13692734?referrer=searchResults
The sugars can be classified as either aldoses or ketoses.
a. True
b. Fasle
Define pressure. Group of answer choices force exerted by solids to the surrounding area force used to compress a gas force used to melt a solid force exerted per unit area by gas particles as they strike the surfaces around them force applied to a gas to condense it
Answer:
force exerted per unit area by gas particles as they strike the surfaces around them
Explanation:
According to the kinetic molecular theory, a gas is composed of molecules. The molecules of a gas are in constant random motion and collide frequently with each other as well as with the walls of the container.
Pressure is defined as force per unit area. The pressure of a gas is the force exerted per unit area by gas particles as they strike the surfaces around them hence the answer above.
