Answers
Answer:
C. Y
Explanation:
From Newton's second law of motion, we know that:
Force = mass x acceleration
So;
acceleration = [tex]\frac{Force }{mass}[/tex]
Therefore, to have the highest acceleration at a constant force, the mass must be low. Acceleration is inversely proportional to mass.
Y has the least mass and it will have the highest acceleration
Related Questions
A teacher places a warm bottles in a cooler filled with ice. Which statement best explains what happened over time?
A) Thermal energy will move from ice to water bottles
B) Coldness will move from the water bottles to the ice.
C) Coldness will move from the ice to the water bottlers
D) Thermal energy will move from the water bottle to the ice.
Answers
Answer:
D) Thermal energy will move from the water bottle to the ice.
Explanation:
Overtime, what happens is that thermal energy will move from the water bottle to the ice.
The water bottle is at a higher temperature compared to the ice. So, thermal energy will move from a place at higher temperature to one with lower temperature.
Thermal energy will stop moving until thermal equilibrium is attained. The water bottle will lose heat to the ice and by so doing it becomes colder. The ice will gain heat and begins to warm upIn designing buildings to be erected in an area prone to earthquakes, what relationship should the designer try to achieve between the natural frequency of the building and the typical earthquake frequencies?
A) The natural frequency of the building should be exactly the same as typical earthquake frequencies.
B) The natural frequency of the building should be almost the same as typical earthquake frequencies but slightly lower
C) The natural frequency of the building should be very different frem typical earthquake frequencies
D) The natural frequency of the building should be almost the same as typical earthquake frequencies but slightly higher.
Answers
Answer:
C) The natural frequency of the building should be very different from typical earthquake frequencies
Explanation:
We shall apply the concept of resonance in this problem .
When a body is applied an external harmonic force ( forced vibration) such that natural frequency of body is equal to frequency of external force or periodicity of external force , the body vibrates under resonance ie its amplitude of vibration becomes very high .
In the present case if natural frequency of building becomes equal to the earthquake's frequency ( external force ) , the building will start vibrating with maximum amplitude , resulting into quick collapse of the whole building . So to avoid this situation , natural frequency of building should be very different from typical earthquake frequencies .
A bar magnet was placed underneath a sheet of paper where a pile of iron filings sits. In the presence of the energy stored in the magnetic field, the iron filings arranged themselves, creating lines of force. How do the energy and the lines of force change when a stronger bar magnet is used?
The answer is "The energy increases, and the lines of force are denser"
Answers
Answer:
The energy increase, and the lines of force are denser
Explanation:
The rest of the answers
1.) The field energy will increase.
3.) It points toward the field of earths magnetic poles.
4.) l, ll, and lll only
5.) ll, lV, l, lll
Based on the information given, the energy and the lines of force change as the energy increases, and the lines of force are dense.
Energy
In physics, it should be noted that energy is the quantitative property which must be transferred to a body or physical system to perform work on the body.
From the information, the bar magnet was placed underneath a sheet of paper where a pile of iron filings sits and in the presence of the energy stored in the magnetic field, the iron filings arranged themselves, creating lines of force. Therefore, when a stronger bar magnet is used, the energy increases and the lines of force are denser.
Learn more about energy on:
https://brainly.com/question/13881533
Which is the best explanation for why Toms technique works ?
Answers
Many scientific studies have found that colds are caused by viruses. What is this? *
Fact
Interpretation
Analysis
Opinion
Answers
a car moved 60 meters west in 2hours what is its average velocity
Answers
Answer:
30 m/h
Explanation:
Have A Wonderful Day !!
Lisa skips 5 m North to the playground. She realizes she forgot to bring water so she turns around and goes 3 m South to the convenience store
Answers
Answer:
-2 South
Always subtract where they ended first is what my teacher said
PLS HELP ME!
A motorist is traveling 40ms-¹ and applies brakes and slow down at a rate of 2ms-² the available distance for the the motorist to stop is 400m will the motorist be able to stop?
Answers
Answer:
[tex] \underline{ \boxed{ yes}}\\[/tex]
Explanation:
[tex]given : initial \: velocity \: (u )= 40 {ms}^{ - 1} \\ given : final \: velocity \: (u )= 0 {ms}^{ - 1} \\ given : - (acceleration) \: (a_r) = 2 {ms}^{ - 2} \\ given : distance \: (s) \: = \: ? : \\ but \: {v}^{2} = {u}^{2} + 2( a)s\\ {0}^{2} = {40}^{2} + 2( - 2)s \\ - {40}^{2} = - 4s \\ s = \frac{ - {40}^{2} }{ - 4} \\ s = \frac{1600}{4} \\s = 400 \: m[/tex]
What relationship must exist between an applied force and the velocity of a moving object if uniform circular motion is to result?
Answers
Answer:
See explanation
Explanation:
Centripetal force is defined as the inward force required to keep an object moving with a constant speed in a circular path.
The magnitude of this force depends on the mass of the object, radius of the object and the velocity of the body.
So we can write;
F = mv^2/r
Introduction: The specific heat capacity of a substance is the amount of energy needed to change the temperature of that substance by 1 °C. Specific heat capacity can be calculated using the following equation:
q = mc deltaT
In the equation q represents the amount of heat energy gained or lost in joules), m is the mass of the substance (in grams), c is the specific heat capacity of the substance (in J/g °C), and AT is the temperature change of the substance in °C).
Goal: Calculate the specific heat capacities of copper, granite, lead, and ice.
Solve: When you mix two substances, the heat gained by one substance is equal to the heat lost by the other substance. Suppose you place 125 g of aluminum in a calorimeter with 1,000 g of water. The water changes temperature by 2 °C and the aluminum changes temperature by -74.95 °C.
A. Water has a known specific heat capacity of 4.184 J/g °C. Use the specific heat equation to find out how much heat energy the water gained (q).
B. Assume that the heat energy gained by the water is equal to the heat energy lost by the aluminum. Use the specific heat equation to solve for the specific heat of aluminum. Aluminum's accepted specific heat value is 0.900 J/g °C. Use this value to check your work.
Answers
Answer:
A) 8,368 J
B) ) 0.893 J/gºC
Explanation:
A)
The heat gained by the water can be obtained solving the following equation:[tex]q_{g} = c_{w} * m * \Delta T (1)[/tex]
where cw = specific heat of water = 4.184 J/gºCm= mass of water = 1,000 gΔT = 2ºC Replacing these values in (1) we get:[tex]q_{g} = c_{w} * m * \Delta T = 4.184 J/gºC*1,000 g* 2ºC = 8,368 J (2)[/tex]
B)
Assuming that the heat energy gained by the water is equal to the one lost by the aluminum, we can use the same equation, taking into account that the energy is lost by the aluminum, so the sign is negative: -8,368 J.Replacing by the mass of aluminum (125 g), and the change in temperature (-74.95ºC), in (1), we can solve for the specific heat of aluminum, as follows:[tex]q_{l} = c_{Al} * m_{Al} * \Delta T (3)[/tex]
⇒ [tex]-8,368 J = c_{Al}* 125 g * (-74.95ºC) (4)[/tex]
[tex]c_{Al} = \frac{-8,368J}{125g*(-74.95ºC} = 0.893 J/gºC (5)[/tex]
which is pretty close to the Aluminum's accepted specific heat value of 0.900 J/gºC.
____ is factual information not subject to bias.
Interpretation
Analysis
Data
Opinion
Answers
Answer:
Data
Explanation:
Data is factual information not subject to bias.
This ultimately implies that, data connotes fact, thus, it is an information that is credible, accurate, a statement of truth, evidential and proven.
In Computer programming, a data dictionary can be defined as a centralized collection of information on a specific data such as attributes, names, fields and definitions that are being used in a computer database system.
In a data dictionary, data elements are combined into records, which are meaningful combinations of data elements that are included in data flows or retained in data stores.
This ultimately implies that, a data dictionary found in a computer database system typically contains the records about all the data elements (objects) such as data relationships with other elements, ownership, type, size, primary keys etc. This records are stored and communicated to other data when required or needed.
If a car is traveling at an average speed of 20 m/s, how long will it take to travel 500 meters?
A. 0.04 seconds
B. 25 seconds
C. 520 seconds
D. 10,000 seconds
Answers
Answer:
B. 25 seconds
Explanation:
500÷20=25
B.25 seconds
A ball is thrown vertically upward from the top of a 100 foot tower, with an initial velocity of 10 ft/sec. Its position function is s(t)=−16t2+10t+100.
a. What is its velocity in ft/sec when t = 2 seconds? (Solve by using instantaneous rate.)
b. Determine the equation of a line, in slope-intercept form, that passes through the points (5, 6) and (10, 2).
Answers
Answer;
-54ft/s
y = -4/5 x + 10
Explanation
Given the position of an object expressed by the function
s(t)=−16t²+10t+100
Velocity is the change in position with respect to time
v(t) = ds(t)/dt
v(t) = -32t + 10
When t = 2
v(2) = -32(2)+10
v(2) = -64+10
v(2) = -54
Hence the velocity of the object is -54ft/s
b) The standard equation of a line in point slope form is expressed as;
y = MX+c
M is the slope
c is the y-intercept
Given the coordinate (5, 6) and (10, 2)
M = 2-6/10-5
M = -4/5
Get the y-intercept
Substitute m = -4/5 and any point say (5,6) into the expression y = mx+c
6 = -4/5 (5) + c
6 = -4+c
c = 6+4
c = 10
Get the required equation
Recall that: y = mx+c
y = -4/5 x + 10
Hence the equation of a line, in slope-intercept form is y = -4/5 x + 10
If an atom of oxygen has an atomic number of eight that means...…
E. there are 8 protons
F. there are 8 neutrons
G. it weighs 8 amu
H. it is in group 8
Answers
A 62 kg student, starting from rest, slide down an 10.6 m high water slide. How fast is he going at the bottom of the slide? Use g = 10 m/s2
Answers
Answer:
14.6m/s
Explanation:
Given parameters:
Mass of the student = 62kg
Initial velocity = 0m/s
Height of slide = 10.6m
g = 10m/s²
Unknown:
Speed at the bottom of the slide = ?
Solution:
The speed at the bottom of the slide is the final velocity;
v ² = u² + 2gh
v is the final velocity
u is the initial velocity
g is the acceleration due to gravity
h is the height
v² = 0² + 2x 10 x 10.6
v² = 212
v = 14.6m/s
What is the instantaneous velocity of a freely falling object 11 s after it is released from a position of rest
Answers
Answer:
v= -107.8 m/s
Explanation:
Since the object is in free fall, this means that is moving at an accceleration equal to the one due to gravity.Since it starts at rest, we can apply the definition of acceleration, rearranging terms as follows:[tex]v_{f} = v_{o} + a*t = a*t = -g*t = 9.8m/s2*11s = -107.8 m/s (1)[/tex]
(Assuming as positive the upward direction)a) A bus of mass 760 kg requires 120 m to reach certain velocity value Vf. Ignore friction and drag forces and assume the bus engine exerts a constant forward force F. When the bus is towing a 330-kg small car, how long distance needed to reach same Vf? b) If the Vf of the bus is 28 m/s, what is the tension in the tow cable between bus and small car?
Answers
Answer:
Given : A bus of mass 760 kg requires 120 m to reach certain velocity value Vf.
the bus engine exerts a constant forward force F.
To Find : When the bus is towing a 330-kg small car, how long distance needed to reach same Vf?
Solution:
V² - U² = 2aS
V = Vf
U = 0
S = 120 m
=> Vf² - 0 = 2a(120)
=> Vf² = 240a
m = 760 kg
Force = F
F = ma
=> F =760 a
=> a = F/760
Vf² = 240F/760
Case 2 :When the bus is towing a 330-kg small car,
m = 760 + 330 = 1090 kg
a = F/1090
Vf² = 2aS
=> 240F/760 = 2 (F/1090) S
=> S = 120 x 1090 /760
=> S = 172.1 m
172.1 m distance needed to reach same Vf
Explanation:
Can a single atom be considered a molecule?
A:only if the atom is found in water
B:no, it takes two or more atoms bonded to create a molecule
C:only if it is an oxygen atom floating in the air
D:yes, all atoms are made up of many different molecules
Answers
A spring stretches by 15cm when a mass of 300g hangs down from it,if the spring is then stretched an additional 10cm and released, calculate;the spring constant,the angular velocity, amplitude of oscillation, maximum velocity, maximum acceleration of the mass,period, frequency
Answers
Answer:
0.1 m
Explanation:
It is given that,
Mass of the object, m = 350 g = 0.35 kg
Spring constant of the spring, k = 5.2 N/m
Amplitude of the oscillation, A = 10 cm = 0.1 m
Frequency of a spring mass system is given by :
Time period:
Two 2.1-cm-diameter electrodes with a 0.20-mm-thick sheet of Teflon between them are attached to a 9.0 V battery. Without disconnecting the battery, the Teflon is removed.
Required:
a. What is the charge before the Teflon is removed?
b. What is the potential difference before the Teflon is removed?
c. What is the electric field before the Teflon is removed?
d. What is the charge after the Teflon is removed?
e. What is the potential difference after the Teflon is removed?
f. What are the electric field after the Teflon is removed?
Answers
Answer:
a. Q = 1881.73 x [tex]10^{-13}[/tex] C
b. As battery is not removed so, potential difference will remain same.
c. E = 21.42 x [tex]10^{3}[/tex] V/m
d. Q = 895.5 x [tex]10^{-13}[/tex] C
e. Again the potential difference will not change it will remain same as 9 V
f. E = 45 x [tex]10^{3}[/tex] V/m
Explanation:
Solution:
Here, Teflon is used so, the dielectric constant of the Teflon K = 2.1
Diameter = 2.1 cm
Radius = 2.1/2 cm
Radius = 1.05 cm
Radius = 0.015 m
Now, we need to find the area of each plate:
A = [tex]\pi r^{2}[/tex]
A = (3.14) ([tex]0.015^{2}[/tex])
A = 0.000225 [tex]m^{2}[/tex]
A = 2.25 x [tex]10^{-4}[/tex] [tex]m^{2}[/tex]
We are given the thickness of the plate which equal to the distance between the two plates.
d = 0.20 mm = 0.2 x [tex]10^{-3}[/tex] m
d = 0.2 x [tex]10^{-3}[/tex] m = distance between two plates.
Hence, the capacitance of the dielectric without the dielectric
C = [tex]\frac{E.A}{d}[/tex]
Putting up the values we get,
E = 8.85 x [tex]10^{-12}[/tex]
C = [tex]\frac{8.85 . 10^{-12} x 2.25 . 10^{-4} }{0.002}[/tex]
C = 99.5 [tex]10^{-13}[/tex]
If dielectric is included then,
[tex]C^{'}[/tex] = K C
[tex]C^{'}[/tex] = (2.1) ( 99.5 x [tex]10^{-13}[/tex])
[tex]C^{'}[/tex] = 209.08 x [tex]10^{-13}[/tex] F
As we know the voltage of the battery V = 9V So,
a) Charge before the Teflon is removed:
Q = CV
Q = [tex]C^{'}[/tex]V
Q = (209.08 x [tex]10^{-13}[/tex] F) (9V)
Q = 1881.73 x [tex]10^{-13}[/tex] C
b) Potential Difference before the Teflon is removed = ?
As battery is not removed so, potential difference will remain same.
c) Electric Field =?
As we know,
E = V/(K.d)
E = 9V/(2.1 x 0.2 x [tex]10^{-3}[/tex])
E = 21.42 x [tex]10^{3}[/tex] V/m
d) After the Teflon is removed
Q = CV
Q = (99.5 [tex]10^{-13}[/tex] ) ( 9)
Q = 895.5 x [tex]10^{-13}[/tex] C
e) Again the potential difference will not change it will remain same as 9 V
f) Electric Field = ?
E = [tex]\frac{V}{d}[/tex] (Teflon is removed)
E = 9/0.2 x [tex]10^{-3}[/tex]
E = 45 x [tex]10^{3}[/tex] V/m
What is the function
of second plate in
parallel plate capacitor?
Answers
the diameter of the wheels on your car ( including the tires) is 25 inches. you are going to drive 250 miles today. each of your wheels is goingnto turn by an angle of
Answers
Explanation
Because I took that test and I got right if u don’t believe me u can brainy it
describe measurement in our daily life
Answers
what is the pressure on a swimmer 50 m below the surface of a lake
Answers
Answer:
P = 490500 [Pa]
Explanation:
The pressure at the bottom of a vessel and even of a lake or sea can be calculated by means of the following hydrostatic equation.
[tex]P=Ro*g*h[/tex]
where:
P = pressure [Pa] (units of pascal)
Ro = water density = 1000 [kg/m³]
g = gravity acceleration = 9.81 [m/s²]
h = elevation = 50 [m]
Now replacing:
[tex]P=1000*9.81*50\\P=490500[Pa][/tex]
You are holding two balloons of the same shape and size. One is filled with helium, and the other is filled with ordinary air. On which balloon the buoyant force is greater?
a. The helium filled balloon experiences the greater buoyant force.
b. The air filled balloon experiences the greater buoyant force.
c. Both balloons experiences same buoyant force.
Answers
Answer:
Both balloons experiences same buoyant force.
Explanation:
Buoyant force is defined as the upward force that is exerted on an object which is wholly or partly immersed in a fluid. We can also define it as the upward force exerted by any fluid upon a body immersed in it. We may also refer to this buoyant force as the upthrust.
This buoyant force is the push of air on the balloon and it is independent of the contents of the balloons. Hence, both balloons experiences same buoyant force.
A safety plug is designed to melt when the pressure inside a metal tank becomes too high. A gas
at 51.0 atm and a temperature of 23.0°C is contained in the tank, but the plug melts when the
pressure reaches 75.0 atm. What temperature did the gas reach?
Answers
Our Sun’s mass is 1.0 and our Earth’s mass is 2.0. The distance is standard as given on the simulation. Describe the path of the Earth.
Answers
Answer:
Earth orbits the Sun at an average distance of 149.60 million km (92.96 million mi), and one complete orbit takes 365.256 days (1 sidereal year), during which time Earth has traveled 940 million km (584 million mi).
Explanation:
a student lift a 25kg mass at vertical distance of 1.6m in a time of 2.0 seconds. a. Find the force needed to lift the mass (in N ). b. Find the work done by the student (in J). c. Find the power exerted by the student (in W)
Answers
Answer:
a. F = 245 Newton.
b. Workdone = 392 Joules.
c. Power = 196 Watts
Explanation:
Given the following data;
Mass = 25kg
Distance = 1.6m
Time = 2secs
a. To find the force needed to lift the mass (in N );
Force = mass * acceleration
We know that acceleration due to gravity is equal to 9.8
F = 25*9.8
F = 245N
b. To find the work done by the student (in J);
Workdone = force * distance
Workdone = 245 * 1.6
Workdone = 392 Joules.
c. To find the power exerted by the student (in W);
Power = workdone/time
Power = 392/2
Power = 196 Watts.
A 71-kg swimmer dives horizontally off a 500-kg raft. If the diver's speed immediately after leaving the raft is 6m/s, what is the corresponding raft speed?
Answers
Answer:
The answer is below
Explanation:
Momentum is used to measure the quantity of motion in an object. Momentum is the product of mass and velocity.
Momentum = mass * velocity
The principle of conservation of momentum states that momentum cannot be created or destroyed but can be transferred. Therefore the momentum before and after an action is equal.
Initial momentum = Final momentum
Let m be the mass of the diver, M be the mass of the raft, u be the initial velocity of the diver, U be the initial velocity of the raft, v be the final velocity of the diver and V be the final velocity of the raft.
m = 71 kg, M = 500 kg, v = 6 m/s
Initial both the raft and diver are at rest, hence u and U is zero, hence:
mu + MU = mv + MV
71(0) + 500(0) = 71(6) + 500(V)
0 = 426 + 500(V)
500(V) = -426
V = -426/500
V = -0.852 m/s
I need this done by tonight!! Can anyone help me please? Answer these 4 questions
Answers
Answer:
1. 14 g of chocolate mixture.
2. 24 fl oz of chocolate milk
3. 10 cups of chocolate milk.
4. 12½ cups.
Explanation:
From the question given above, the following data were obtained:
1 TBSP = 7 g
1 Cup = 8 fl oz
2 Table spoons (TBSP) for 1 cup (8 fl oz) of milk.
1. Determination of the mass of chocolate mixture in 1 cup of chocolate milk.
From the question given above,
1 Cup required 2 Table spoons (TBSP)
But
1 TBSP = 7 g
Therefore,
2 TBSP = 2 × 7 = 14 g
Thus, 1 Cup required 14 g of chocolate mixture.
2. Determination of the number fl oz of chocolate milk in 3 cups
1 Cup = 8 fl oz
Therefore,
3 Cups = 3 × 8
3 Cups = 24 fl oz
Thus, 24 fl oz of chocolate milk are in 3 cups.
3. Determination of the number of cups of chocolate milk produce from 20 TBSP.
2 TBSP is required to produce 1 cup.
Therefore,
20 TBSP will produce = 20/2 = 10 Cups.
Thus, 10 cups of chocolate milk produce from 20 TBSP.
4. Determination of the number of cups obtained from 100 fl oz chocolate milk.
8 fl oz is required to produce 1 cup.
Therefore,
100 fl oz will produce = 100 / 8 = 12½ cups.
Thus, 12½ cups is obtained from 100 fl oz chocolate milk.
