The correct equation for the x component of a vector named A with an angle measured from the x axis would be which of the following?

Answer:

W = Q * V     work done on charge Q

A. W = .5 C * 1.5 V = .75 Joules

B. P = W / t = .75 J / 1 sec = .75 Watts

Answer:

Power = Energy/time

Energy = Power xtime.

Time= 20hrs

Power = 100Watt =0.1Kw

Energy = 0.1 x 20 = 2Kwhr.

This Answer is in Kilowatt-hour ...

If the one given to you is in Joules

You'd have to Change your time to seconds

Then Multiply it by the power of 100Watts.

Answer:

[tex]T=326.928K[/tex]

Explanation:

From the question we are told that:

Emissivity [tex]e=0.44[/tex]

Absorptivity [tex]\alpha =0.3[/tex]

Rate of solar Radiation [tex]R=0.3[/tex]

Generally the equation for Surface absorbed energy is mathematically given by

 [tex]E=\alpha R[/tex]

 [tex]E=0.3*950[/tex]

 [tex]E=285W/m^2[/tex]

Generally the equation for Emitted Radiation is mathematically given by

 [tex]\mu=e(\sigmaT^4)[/tex]

Where

T=Temperature

 [tex]\sigma=5.67*10^8Wm^{-2}K_{-4}[/tex]

Therefore

 [tex]\alpha*E=e \sigma T^4[/tex]

 [tex]0.3*(950)=0.44(5.67*10^-8)T^4[/tex]

 [tex]T=326.928K[/tex]

Answer:

act or process of measuring

Explanation:

Explanation:

the comparison of an unknown quantity with a known quantity.

Answer:

9.25 m/s

Explanation:

Answer:

v = 87.46 m/s

Explanation:

The radial acceleration is the centripetal acceleration, whose formula is given as:

[tex]a_c = \frac{v^2}{r}[/tex]

where,

[tex]a_c[/tex] = centripetal acceleration = 17 m/s²

v = planes's speed = ?

r = radius of path = 450 m

Therefore,

[tex]17\ m/s^2 = \frac{v^2}{450\ m}\\\\v^2 = (17\ m/s^2)(450\ m)\\\\v = \sqrt{7650\ m^2/s^2}[/tex]

v = 87.46 m/s

Answer:

(a) t = 0 s

(b) t = 0 s, 30 s, 55 s

(c) t = 40 s to t = 60 s

(d) t = 10 s to t = 15 s

(e) a = 6 m/s^2

Explanation:

(a) The car is at starting position at t = 0 s and v = 0 m/s.

(b) The velocity of car is zero when the time is t = 0 s, 30 s and 55 s.

(c) from t = 40 s to 60 s the car is moving in the negative direction.

(d) The fastest speed is 60m/s from t = 10 s to t = 15 s.

(e) The slope of the velocity time graph gives acceleration.

a = (60 - 0) / (10 - 0) = 6 m/s^2

Answer:

Explanation:

static equilibrium means its on the floor or something

so slightly greater than 98 newtons in the upward direction

Answer:

B. Smaller than

Explanation:

This question is from the Doppler effect. As the object which is in motion goes off from the other, there's a reduction in the frequency. This is due to the fact that successive soundwave get to be longer. So that the pitch will then be lowered. When the person observing moves towards what is making the sound, each soundwave that follows gets faster than the previous.

Answer:

Multiply current in amperes by the length of the circuit in feet to get ampere-feet. Circuit length is the distance from the point of origin to the load end of the circuit.

Divide by 100.

Multiply by proper voltage drop value in tables. The result is voltage drop.

Explanation:

Answer:

Explanation:

Moment of inertia of solid sphere = 2/5 m R²

m is mass and R is radius of sphere.

Putting the values

Moment of inertia of solid sphere I₁

Moment of inertia of hollow  sphere I₂

Kinetic energy of solid sphere ( both linear and rotational )

= 1/2 ( m v² + I₁ ω²)                [ ω is angular velocity of rotation ]

= 1/2 ( m v² + 2/5 m R² ω²)

= 1/2 ( m v² + 2/5 m v²)

=1/2 x 7 / 5 m v²

= 0.7 x 5 x 4² = 56 J .

This will be equal to work to be done to stop it.

Kinetic energy of hollow sphere ( both linear and rotational )

= 1/2 ( m v² + I₂ ω²)  [ ω is angular velocity of rotation ]

= 1/2 ( m v² + 2/3 m R² ω²)

= 1/2 ( m v² + 2/3 m v²)

=1/2 x 5 / 3 m v²

= 0.833 x 5 x 4² = 66.64 J .

This will be equal to work to be done to stop it.

Answer:

59.26°

Explanation:

Since a is the acceleration of the particle B, the horizontal component of acceleration is a" = asinθ and the vertical component is a' = acosθ where θ angle between a with arrow and the positive direction of the y axis.

Now, for particle B to collide with particle A, it must move vertically the distance between A and B which is y = 31 m in time, t.

Using y = ut + 1/2a't² where u = initial velocity of particle B = 0 m/s, t = time taken for collision, a' = vertical component of particle B's acceleration =  acosθ.

So, y = ut + 1/2a't²

y = 0 × t + 1/2(acosθ)t²

y = 0 + 1/2(acosθ)t²

y = 1/2(acosθ)t²   (1)

Also, both particles must move the same horizontal distance to collide in time, t.

Let x be the horizontal distance,

x = vt (2)where v = velocity of particle A = 2.8 m/s and t = time for collision

Also,  using x = ut + 1/2a"t² where u = initial velocity of particle B = 0 m/s, t = time taken for collision, a" = horizontal component of particle B's acceleration =  asinθ.

So, x = ut + 1/2a"t²

x = 0 × t + 1/2(ainsθ)t²

x = 0 + 1/2(asinθ)t²

x = 1/2(asinθ)t²  (3)

Equating (2) and (3), we have

vt = 1/2(asinθ)t²   (4)

From (1) t = √[2y/(acosθ)]

Substituting t into (4), we have

v√[2y/(acosθ)] = 1/2(asinθ)(√[2y/(acosθ)])²  

v√[2y/(acosθ)] = 1/2(asinθ)(2y/(acosθ)  

v√[2y/(acosθ)] = ytanθ

√[2y/(acosθ)] = ytanθ/v

squaring both sides, we have

(√[2y/(acosθ)])² = (ytanθ/v)²

2y/acosθ = (ytanθ/v)²

2y/acosθ = y²tan²θ/v²

2/acosθ = ytan²θ/v²

1/cosθ = aytan²θ/2v²

Since 1/cosθ = secθ = √(1 + tan²θ) ⇒ sec²θ = 1 + tan²θ ⇒ tan²θ = sec²θ - 1

secθ = ay(sec²θ - 1)/2v²

2v²secθ = aysec²θ - ay

aysec²θ - 2v²secθ - ay = 0

Let secθ = p

ayp² - 2v²p - ay = 0

Substituting the values of a = 0.35 m/s, y = 31 m and v = 2.8 m/s into the equation, we have

ayp² - 2v²p - ay = 0

0.35 × 31p² - 2 × 2.8²p - 0.35 × 31 = 0

10.85p² - 15.68p - 10.85 = 0

dividing through by 10.85, we have

p² - 1.445p - 1 = 0

Using the quadratic formula to find p,

[tex]p = \frac{-(-1.445) +/- \sqrt{(-1.445)^{2} - 4 X 1 X (-1)}}{2 X 1} \\p = \frac{1.445 +/- \sqrt{2.088 + 4}}{2} \\p = \frac{1.445 +/- \sqrt{6.088}}{2} \\p = \frac{1.445 +/- 2.4675}{2} \\p = \frac{1.445 + 2.4675}{2} or p = \frac{1.445 - 2.4675}{2} \\p = \frac{3.9125}{2} or p = \frac{-1.0225}{2} \\p = 1.95625 or -0.51125[/tex]

Since p = secθ

secθ = 1.95625 or secθ = -0.51125

cosθ = 1/1.95625 or cosθ = 1/-0.51125

cosθ = 0.5112 or cosθ = -1.9956

Since -1 ≤ cosθ ≤ 1 we ignore the second value since it is less than -1.

So, cosθ = 0.5112

θ = cos⁻¹(0.5112)

θ = 59.26°

So, the angle between a with arrow and the positive direction of the y axis would result in a collision is 59.26°.

Complete question:

A transverse wave on a rope is given by [tex]y \ (x, \ t) = (0.75 \ cm) \ cos \ \pi[(0.400 \ cm^{-1}) x + (250 \ s^{-1})t][/tex]. The mass per unit length of the rope is 0.0500 kg/m. Find the tension. Express your answer in newtons.

Answer:

The tension on the rope is 1.95 N

Explanation:

The general equation of a progressive wave is given as;

[tex]y \ (x,t) = A \ cos(kx \ + \omega t)[/tex]

Compare the given equation with the general equation of wave, the following parameters will be deduced.

A = 0.75 cm

k = 0.400π cm⁻¹

ω = 250π s⁻¹

The frequency of the wave is calculated as;

ω = 2πf

2πf = 250π

2f = 250

f = 250/2

f = 125 Hz

The wavelength of the wave is calculated as;

[tex]\lambda = \frac{2\pi}{k} \\\\\lambda = \frac{2\pi }{0.4 \pi} = 5 \ cm = 0.05 \ m[/tex]

The velocity of the wave is calculated as;

v = fλ

v = 125 x 0.05

v = 6.25 m/s

The tension on the rope is calculated as;

[tex]v = \sqrt{\frac{T}{\mu}} \\\\where;\\\\T \ is \ the \ tension \ of \ the \ rope\\\\\mu \ is \ the \ mass \ per \ unit \ length = 0.05 \ kg/m\\\\v^2 = \frac{T}{\mu} \\\\T = v^2 \mu\\\\T = (6.25)^2\times (0.05)\\\\T = 1.95 \ N[/tex]

Therefore, the tension on the rope is 1.95 N

Answer:

The correct option is (E).

Explanation:

Given that,

Mass of object 1, m₁ = 1 kg

Mass of object 2, m₂ = 2 kg

They collides after the collision. We need to find the speed of the two boxes after the collision.

The initial speeds of both boxes is not given. So, we can't put the values of their speeds in the momentum conservation equation.

So, the information is not enough.

Answer:

Look at work

Explanation:

Series:

I is the same for all resistors so just find the value of Req. In series Req= R1+R2+...+Rn. So here it will be 4.5+2.3=6.8ohms. Ieq=Veq/Req=4.41A. And since current is the same across all resistors the current to the lightbulb is 4.41A.

Parallel:

V is the same for all resistors so start of by finding Req. In parallel, Ieq=I1+I2+...+In. So I1= 30/4.5= 6.67A and I2= 13.04A. Ieq= 6.67+13.04= 19.71A.

Answer:

Block A velocity is 23.33 m/s and the collission is not elastic.

Explanation:

a) m1v1 + m2v2 = m1v1' + m2v2'

Plug in givens

90+60=3v1'+80

solve for v1'= 23.33m/s

b) Find the initial and final kinetic energy of Block B

Ki= 1/2(4)(15)^2 + 1/2(3)(30)^2 = 1800 J

Kf= 1/2(4)(20)^2 + 1/2(3)*(23.33)^2= 1616.433J

Since Ki does not equal Kf the collision is not elastic

Answer:

because both petrol and diesel are oil

Explanation:

oil floats on water that's why if we will try to extinguish with water so the fire will float on water

hope u like my answer

please mark methe brainest

Answer:

When a teen driver drives with a lot of his peers as passengers they may lead to distraction which may later end up in accident as the driver was distracted

Overconfidence, lack of focus, and phone while driving are the factors  contribute to accidents when a teen driver controls other teens as passengers,

When a teen driver drives with a lot of his peers as passengers they may direct to distraction which may later end up in casualty as the driver was distracted.

Several studies have indicated that passengers substantially increase the chance of crashes for young, novice drivers. This improved risk may result from distractions that young passengers complete for drivers.Teens driving with a teen or young adult passengers existence of teen or young adult passengers raises the crash risk of unsupervised teen drivers. This risk grows with each additional teen or a young adult passenger.

Crash risk is two- to six times more significant for those who utilize a cellphone while driving resembled for drivers who are not distracted. Using a phone delays reaction time increases lane deviations, and forces drivers to look away from the road for extended times.

Overconfidence, lack of focus, and phone while driving are the factors  contribute to accidents when a teen driver controls other teens as passengers,

To learn more about factors contribute to accidents refer to:

https://brainly.com/question/4853141

#SPJ2

Answer:

Centripetal Acceleration 18.75 m/s^2, Rotational Kinetic Energy 843.75 J

Explanation:

a Linear acceleration (we cant find tangential acceleration with the givens so we will find centripetal)

a= ω^2*r

ω= 300rev/min

convert into rev/s

300/60= 5rev/s

a= 18.75m/s^2

b) use Krot= 1/2 Iω^2

plug in gives

1/2(30*2.25)(25)= 843.75 J

Answer:

sup qwertyasdfghjk

Explanation:

Answer:

F = 1.638 x 10⁸ N = 163.8 MN

Explanation:

The total force exerted by the molasses is given as:

F = PA

where,

F = Force exerted by the molasses = ?

P = Pressure = ρgh

ρ = density of molasses = 1600 kg/m³

g = acceleration due to gravity = 9.81 m/s²

h = height of tank = 17.7 m

A = cross-sectional area of tank = πr²

r = radius of tank = 27.4 m/2 = 13.7 m

Therefore,

[tex]F = \rho ghA = \rho gh(\pi r^2)\\\\F = (1600\ kg/m^3)(9.81\ m/s^2)(17.7\ m)(\pi)(13.7\ m)^2[/tex]

F = 1.638 x 10⁸ N = 163.8 MN

Distance travelled by a body in unit time is called speed. it is a scalar quantity because it can be specified only by magnitude.

Answer:

They established the laws of planetary motion. They explained how the Sun rises and sets. They made astronomy accessible to people who spoke Italian.

Explanation:

Answer:

In 1 second the amount of charge flowing through the conductor is 2.5 Q.

Explanation:

Answer:

The electron’s wavefunction has at least one node (i.e., at least one place in space where it goes to zero).

Explanation:

We know that the p-orbitals have nodes. A node is a region where the probability of finding an electron goes down to zero.

P orbitals are oriented along the x,y,z Cartesian axes and are known to have angular nodes along the axes.

Hence, if an electron in a hydrogen atom is in a p state, the electron’s wavefunction has at least one node

Answer:

you can measure by scale beacause we dont no sorry i cant help u but u can ask me some other Q

Answer:

 v = -v₀ / 2

Explanation:

For this exercise let's use kinematics relations.

Let's use the initial conditions to find the acceleration of the electron

            v² = v₀² - 2a y

when the initial velocity is vo it reaches just the negative plate so v = 0

           a = v₀² / 2y

now they tell us that the initial velocity is half

          v’² = v₀’² - 2 a y’

          v₀ ’= v₀ / 2

at the point where turn v = 0              

          0 = v₀² /4  - 2 a y '

          v₀² /4 = 2 (v₀² / 2y)  y’

          y = 4 y'

          y ’= y / 4

We can see that when the velocity is half, advance only ¼ of the distance between the plates, now let's calculate the velocity if it leaves this position with zero velocity.

         v² = v₀² -2a y’

         v² = 0 - 2 (v₀² / 2y) y / 4

         v² = -v₀² / 4

         v = -v₀ / 2

We can see that as the system has no friction, the arrival speed is the same as the exit speed, but with the opposite direction.