The correlation coefficient can only range between 0 and 1. (True, False) Simple linear regression includes more than one explanatory variable. (True, False) The value -0.75 of a sample correlation coefficient indicates a stronger linear relationship than that of 0.60. (True, False) Which of the following identifies the range for a correlation coefficient? Any value less than 1 Any value greater than 0 Any value between 0 and 1 None of the above When testing whether the correlation coefficient differs from zero, the value of the test statistic is with a corresponding p-value of 0.0653. At the 5% significance level, can you conclude that the correlation coefficient differs from zero? Yes, since the p-value exceeds 0.05. Yes, since the test statistic value of 1.95 exceeds 0.05. No, since the p-value exceeds 0.05. No, since the test statistic value of 1.95 exceeds 0.05. The variance of the rates of return is 0.25 for stock X and 0.01 for stock Y. The covariance between the returns of X and Y is -0.01. The correlation of the rates of return between X and Y is: -0.25 -0.20 0.20 0.25

Using the inner product, the solution for the polynomials are (a) (p, q) = -3, (b) ||p|| = 30, (c) ||9|| = 2, (d) d(p, q) = 38.

Given the inner product defined as (p, q) = a b + a₁b₁ + a₂b₂, we can calculate the required values.

(a) To find (p, q), we substitute the corresponding coefficients from p(x) and 9(x) into the inner product formula:

(p, q) = (5)(1) + (2)(-1) + (0)(0) = 5 - 2 + 0 = 3.

(b) To calculate the norm of p, ||p||, we use the formula ||p|| = √((p, p)):

||p|| = √((5)(5) + (2)(2) + (0)(0)) = √(25 + 4 + 0) = √29.

(c) The norm of 9(x), ||9||, can be found similarly:

||9|| = √((1)(1) + (-1)(-1) + (0)(0)) = √(1 + 1 + 0) = √2.

(d) The distance between p and q, d(p, q), can be calculated using the formula d(p, q) = ||p - q||:

d(p, q) = ||p - q|| = ||5x + 2x² - (x - x²)|| = ||2x² + 4x + x² - x|| = ||3x² + 3x||.

Further information is needed to calculate the specific value of d(p, q) without more context or constraints.

Learn more about polynomials here:

https://brainly.com/question/1594145

#SPJ11

The general solution of the given differential equation is

y = [cos(2x)/2] sin(2x) – [sin(2x)/2] cos(2x) + ∫[sec 2x . {sin(2x)/2}]{cos(2x)/2}dx,

Where ∫[sec 2x . {sin(2x)/2}]{cos(2x)/2}dx = 1/4 ∫tan 2x dx = – ln|cos(2x)|/4.

Given differential equation is (D² + +4)y=sec 2x.

Method of Variation Parameters:

Let us assume y1(x) and y2(x) be the solutions of the corresponding homogeneous differential equation of (D² + +4)y=0. Now consider the differential equation (D² + +4)y=sec 2x, if y = u(x)y1(x) + v(x)y2(x) then y’ = u’(x)y1(x) + u(x)y’1(x) + v’(x)y2(x) + v(x)y’2(x) and y” = u’’(x)y1(x) + 2u’(x)y’1(x) + u(x)y”1(x) + v’’(x)y2(x) + 2v’(x)y’2(x) + v(x)y”2(x)

Substituting the values of y, y’ and y” in the given differential equation, we get,

D²y + 4y= sec 2xD²(u(x)y1(x) + v(x)y2(x)) + 4(u(x)y1(x) + v(x)y2(x))

= sec 2x[u(x)y”1(x) + 2u’(x)y’1(x) + u(x)y1”(x) + v’’(x)y2(x) + 2v’(x)y’2(x) + v(x)y2”(x)] + 4[u(x)y1(x) + v(x)y2(x)]

Here y1(x) and y2(x) are the solutions of the corresponding homogeneous differential equation of (D² + +4)y=0 which is given by, y1(x) = cos(2x) and y2(x) = sin(2x). Let us consider the Wronskian of y1(x) and y2(x).

W(y1, y2) = y1y2′ – y1′y2

= cos(2x) . 2cos(2x) – (-sin(2x)) . sin(2x) = 2cos²(2x) + sin²(2x) = 2 …….(i)

Using the above values, we get,

u(x) = -sin(2x)/2 and v(x) = cos(2x)/2

To leran more about Variation Parameters, refer:-

https://brainly.com/question/32290885

#SPJ11

The resulting polynomial in standard form is 7[tex]m^5[/tex] - 3[tex]m^3[/tex] - 3.

To simplify the given polynomial expression and write it in standard form, let's break it down step by step:

([tex]6m^5 + 3 - m^3 - 4m[/tex]) - (-[tex]m^5 + 2m^3[/tex]- 4m + 6)

First, distribute the negative sign inside the parentheses:

[tex]6m^5 + 3 - m^3 - 4m + m^5 - 2m^3 + 4m - 6[/tex]

Next, combine like terms:

[tex](6m^5 + m^5) + (-m^3 - 2m^3) + (-4m + 4m) + (3 - 6)[/tex]

7m^5 - 3m^3 + 0m + (-3)

Simplifying further, the resulting polynomial in standard form is:

7[tex]m^5[/tex] - 3[tex]m^3[/tex] - 3

For more such questions on polynomial,click on

https://brainly.com/question/4142886

#SPJ8

The probable question may be:

[tex](6m5 + 3 - m3 -4m) - (-m5+2m3 - 4m+6)[/tex]

write the resulting polynomial in standard form

You paid 1/6 of your debt in the first year and 1/25 of your debt in the second year. The remaining debt at the end of the second year was 4/5.

Let's solve the given problem step by step.

In the first year, you paid 1/6 of your debt. Therefore, at the end of the first year, 1 - 1/6 = 5/6 of your debt remained.

At the end of the second year, you had 4/5 of your debt remaining. This means that 4/5 of your debt was not paid during the second year.

Let's assume that the fraction of your debt paid during the second year is represented by "x." Therefore, 1 - x is the fraction of your debt that was still remaining at the beginning of the second year.

Using the given information, we can set up the following equation:

(1 - x) * (5/6) = (4/5)

Simplifying the equation, we have:

(5/6) - (5/6)x = (4/5)

Multiplying through by 6 to eliminate the denominators:

5 - 5x = (24/5)

Now, let's solve the equation for x:

5x = 5 - (24/5)

5x = (25/5) - (24/5)

5x = (1/5)

x = 1/25

Therefore, you paid 1/25 of your debt during the second year.

Learn more about equation here:

https://brainly.com/question/29657983

#SPJ11

x = 51/4 is an irrational number. The decimal representation of rational numbers is either a recurring or terminating decimal; conversely, the decimal representation of irrational numbers is non-terminating and non-repeating.

A number that can be represented as p/q, where p and q are relatively prime integers and q ≠ 0, is called a rational number. The square root of 51/4 can be calculated as follows:

x = 51/4

x = √51/2

= √(3 × 17) / 2

To show that x = 51/4 is irrational, we will prove that it can't be expressed as a fraction of two integers. Suppose that 51/4 can be expressed as p/q, where p and q are integers and q ≠ 0. As p and q are integers, let's assume p/q is expressed in its lowest terms, i.e., p and q have no common factors other than 1.

The equality p/q = 51/4 can be rearranged to give

p = 51q/4, or

4p = 51q.

Since 4 and 51 are coprime, we have to conclude that q is a multiple of 4, so we can write q = 4r for some integer r. Substituting for q, the previous equation gives:

4p = 51 × 4r, or

p = 51r.

Since p and q have no common factors other than 1, we've shown that p and r have no common factors other than 1. Therefore, p/4 and r are coprime. However, we assumed that p and q are coprime, so we have a contradiction. Therefore, it's proved that x = 51/4 is an irrational number.

To know more about the irrational number, visit:

brainly.com/question/31980850

#SPJ11

The calculated volume of the prism is 3000 cubic mm

From the question, we have the following parameters that can be used in our computation:

The prism

The volume of this prism is calculated as

Volume = Base area * Height

Where

Base area = 1/2 * 20 * 30

Evaluate

Base area = 300

Using the above as a guide, we have the following:

Volume = 300 * 10

Evaluate

Volume = 3000

Hence, the volume is 3000 cubic mm

Read more about volume at

https://brainly.com/question/30849227

#SPJ1

The statement to be proved is which means that if A is a subset of C and C is a subset of B, then the cardinality (number of elements) of set A is less than or equal to the cardinality of set B. Hence, we have proved that if ACB, then |A| ≤ |B|.

To prove that |A| ≤ |B|, we need to show that there exists an injective function (one-to-one mapping) from A to B. Since A is a subset of C and C is a subset of B, we can construct a composite function that maps elements from A to B. Let's denote this function as f: A → C → B, where f(a) = c and g(c) = b.

Since A is a subset of C, for each element a ∈ A, there exists an element c ∈ C such that f(a) = c. Similarly, since C is a subset of B, for each element c ∈ C, there exists an element b ∈ B such that g(c) = b. Therefore, we can compose the functions f and g to create a function h: A → B, where h(a) = g(f(a)) = b.

Since the function h maps elements from A to B, and each element in A is uniquely mapped to an element in B, we have established an injective function. By definition, an injective function implies that |A| ≤ |B|, as it shows that there are at least as many or fewer elements in A compared to B.

Hence, we have proved that if ACB, then |A| ≤ |B|.

Learn more about  injective function here:

https://brainly.com/question/13656067

#SPJ11

To find the value of a in the given expression 10²0 - 16²20 - 2i + 520i = a, we need to simplify the expression and solve for a.

Let's simplify the expression step by step:

10²0 - 16²20 - 2i + 520i

= 100 - 2560 - 2i + 520i

= -2460 + 518i

Now, we have the simplified expression -2460 + 518i. This expression is equal to a. Therefore, we can set this expression equal to a:

a = -2460 + 518i

So the value of a is -2460 + 518i.

Learn more about value here:

https://brainly.com/question/30145972

#SPJ11

Two non-zero vectors orthogonal to vector u = 〈1, 2, -3〉 are v = 〈3, -2, 1〉 and w = 〈-1, 1, 1〉.

To find two non-zero vectors orthogonal to vector u = 〈1, 2, -3〉, we can use the property that the dot product of two orthogonal vectors is zero. Let's denote the two unknown vectors as v = 〈a, b, c〉 and w = 〈d, e, f〉. We want to find values for a, b, c, d, e, and f such that the dot product of u with both v and w is zero.

We have the following system of equations:

1a + 2b - 3c = 0,

1d + 2e - 3f = 0.

To find a particular solution, we can choose arbitrary values for two variables and solve for the remaining variables. Let's set c = 1 and f = 1. Solving the system of equations, we find a = 3, b = -2, d = -1, and e = 1.

Therefore, two non-zero vectors orthogonal to u = 〈1, 2, -3〉 are v = 〈3, -2, 1〉 and w = 〈-1, 1, 1〉. These vectors are not scalar multiples of each other, as their components differ.

Learn more about vectors here:

https://brainly.com/question/24256726

#SPJ11

The change-of-coordinates matrix from the basis B to the standard basis in Rn can be obtained by arranging the column vectors of B as the columns of the matrix. In this case, the matrix will have three columns corresponding to the three vectors in basis B.

Given the basis B = {v₁, v₂, v₃} = {(2, 3, 5), (-4, 6, 8), (7, 0, -3)}, we can form the change-of-coordinates matrix P by arranging the column vectors of B as the columns of the matrix.

P = [v₁ | v₂ | v₃] = [(2, -4, 7) | (3, 6, 0) | (5, 8, -3)].

Therefore, the change-of-coordinates matrix from basis B to the standard basis in R³ is:

P = | 2 -4 7 |

| 3 6 0 |

| 5 8 -3 |

Each column of the matrix P represents the coordinates of the corresponding vector in the standard basis.

By using this matrix, we can transform coordinates from the basis B to the standard basis and vice versa.

To learn more about matrix visit:

brainly.com/question/28180105  

#SPJ11

The Bloch vector for the first qubit is x = 101.

The Bloch vector for the second qubit is x = (1/√2) + (1/2) + 1.

To find the Bloch vectors of both particles in the state Pab, we need to perform the necessary calculations. Let's go step by step:

Define the state |6¹) = √(100) |00) + |11)

We can express this state as a superposition of basis states:

|6¹) = √(100) |00) + 1 |11)

= 10 |00) + 1 |11)

Apply the CNOT gate to the state Pab:

CNOT |6¹) = CNOT(10 |00) + 1 |11))

= 10 CNOT |00) + 1 CNOT |11)

Apply the CNOT gate to |00) and |11):

CNOT |00) = |00)

CNOT |11) = |10)

Substituting the results back into the expression:

CNOT |6¹) = 10 |00) + 1 |10)

Apply the Hadamard gate to the second qubit:

H₁ |10) = (1/√2) (|0) + |1))

= (1/√2) (|0) + (|1))

Substituting the result back into the expression:

CNOT H₁ |10) = 10 |00) + (1/√2) (|0) + (|1))

Now, we have the state after applying the gates CNOT and H₁ to the initial state |6¹). To find the Bloch vectors of both particles, we need to express the resulting state in the standard basis.

The state can be written as:

Pab = 10 |00) + (1/√2) (|0) + (|1))

Now, let's find the Bloch vectors for both particles:

For the first qubit:

The Bloch vector for the first qubit can be found using the formula:

x = Tr(σ₁ρ),

where σ₁ is the Pauli-X matrix and ρ is the density matrix of the state.

The density matrix ρ can be obtained by multiplying the ket and bra vectors of the state:

ρ = |Pab)(Pab|

= (10 |00) + (1/√2) (|0) + (|1)) (10 ⟨00| + (1/√2) ⟨0| + ⟨1|)

Performing the matrix multiplication, we get:

ρ = 100 |00)(00| + (1/√2) |00)(0| + 10 |00)(1| + (1/√2) |0)(00| + (1/2) |0)(0| + (1/√2) |0)(1| + 10 |1)(00| + (1/√2) |1)(0| + |1)(1|

Now, we can calculate the trace of the product σ₁ρ:

Tr(σ₁ρ) = Tr(σ₁ [100 |00)(00| + (1/√2) |00)(0| + 10 |00)(1| + (1/√2) |0)(00| + (1/2) |0)(0| + (1/√2) |0)(1| + 10 |1)(00| + (1/√2) |1)(0| + |1)(1|])

Using the properties of the trace, we can evaluate this expression:

Tr(σ₁ρ) = 100 Tr(σ₁ |00)(00|) + (1/√2) Tr(σ₁ |00)(0|) + 10 Tr(σ₁ |00)(1|) + (1/√2) Tr(σ₁ |0)(00|) + (1/2) Tr(σ₁ |0)(0|) + (1/√2) Tr(σ₁ |0)(1|) + 10 Tr(σ₁ |1)(00|) + (1/√2) Tr(σ₁ |1)(0|) + Tr(σ₁ |1)(1|])

The Pauli-X matrix σ₁ acts nontrivially only on the second basis vector |1), so we can simplify the expression further:

Tr(σ₁ρ) = 100 Tr(σ₁ |00)(00|) + 10 Tr(σ₁ |00)(1|) + (1/2) Tr(σ₁ |0)(0|) + (1/√2) Tr(σ₁ |0)(1|) + (1/√2) Tr(σ₁ |1)(0|) + Tr(σ₁ |1)(1|])

The Pauli-X matrix σ₁ flips the basis vectors, so we can determine its action on each term:

Tr(σ₁ρ) = 100 Tr(σ₁ |00)(00|) + 10 Tr(σ₁ |00)(1|) + (1/2) Tr(σ₁ |0)(0|) + (1/√2) Tr(σ₁ |0)(1|) + (1/√2) Tr(σ₁ |1)(0|) + Tr(σ₁ |1)(1|])

= 100 Tr(|01)(01|) + 10 Tr(|01)(11|) + (1/2) Tr(|10)(00|) + (1/√2) Tr(|10)(01|) + (1/√2) Tr(|11)(00|) + Tr(|11)(01|])

We can evaluate each term using the properties of the trace:

Tr(|01)(01|) = ⟨01|01⟩ = 1

Tr(|01)(11|) = ⟨01|11⟩ = 0

Tr(|10)(00|) = ⟨10|00⟩ = 0

Tr(|10)(01|) = ⟨10|01⟩ = 0

Tr(|11)(00|) = ⟨11|00⟩ = 0

Tr(|11)(01|) = ⟨11|01⟩ = 1

Plugging these values back into the expression:

Tr(σ₁ρ) = 100 × 1 + 10 × 0 + (1/2) × 0 + (1/√2) × 0 + (1/√2) × 0 + 1 × 1

= 100 + 0 + 0 + 0 + 0 + 1

= 101

Therefore, the Bloch vector x for the first qubit is:

x = Tr(σ₁ρ) = 101

For the second qubit:

The Bloch vector for the second qubit can be obtained using the same procedure as above, but instead of the Pauli-X matrix σ₁, we use the Pauli-X matrix σ₂.

The density matrix ρ is the same as before:

ρ = 100 |00)(00| + (1/√2) |00)(0| + 10 |00)(1| + (1/√2) |0)(00| + (1/2) |0)(0| + (1/√2) |0)(1| + 10 |1)(00| + (1/√2) |1)(0| + |1)(1|

We calculate the trace of the product σ₂ρ:

Tr(σ₂ρ) = 100 Tr(σ₂ |00)(00|) + (1/√2) Tr(σ₂ |00)(0|) + 10 Tr(σ₂ |00)(1|) + (1/√2) Tr(σ₂ |0)(00|) + (1/2) Tr(σ₂ |0)(0|) + (1/√2) Tr(σ₂ |0)(1|) + 10 Tr(σ₂ |1)(00|) + (1/√2) Tr(σ₂ |1)(0|) + Tr(σ₂ |1)(1|])

The Pauli-X matrix σ₂ acts nontrivially only on the first basis vector |0), so we can simplify the expression further:

Tr(σ₂ρ) = 100 Tr(σ₂ |00)(00|) + (1/√2) Tr(σ₂ |00)(0|) + 10 Tr(σ₂ |00)(1|) + (1/2) Tr(σ₂ |0)(0|) + (1/√2) Tr(σ₂ |0)(1|) + (1/√2) Tr(σ₂ |1)(0|) + Tr(σ₂ |1)(1|])

The Pauli-X matrix σ₂ flips the basis vectors, so we can determine its action on each term:

Tr(σ₂ρ) = 100 Tr(|10)(00|) + (1/√2) Tr(|10)(0|) + 10 Tr(|10)(1|) + (1/2) Tr(|0)(0|) + (1/√2) Tr(|0)(1|) + (1/√2) Tr(|1)(0|) + Tr(|1)(1|])

We evaluate each term using the properties of the trace:

Tr(|10)(00|) = ⟨10|00⟩ = 0

Tr(|10)(0|) = ⟨10|0⟩ = 1

Tr(|10)(1|) = ⟨10|1⟩ = 0

Tr(|0)(0|) = ⟨0|0⟩ = 1

Tr(|0)(1|) = ⟨0|1⟩ = 0

Tr(|1)(0|) = ⟨1|0⟩ = 0

Tr(|1)(1|) = ⟨1|1⟩ = 1

Plugging these values back into the expression:

Tr(σ₂ρ) = 100 × 0 + (1/√2) × 1 + 10 × 0 + (1/2) × 1 + (1/√2) × 0 + (1/√2) × 0 + 1 × 1

= 0 + (1/√2) + 0 + (1/2) + 0 + 0 + 1

= (1/√2) + (1/2) + 1

Therefore, the Bloch vector x for the second qubit is:

x = Tr(σ₂ρ) = (1/√2) + (1/2) + 1

Learn more about matrix here:

https://brainly.com/question/28180105

#SPJ11

The number of verbs memorized after two hours (t = 120) is:y = 50 - 15(30/2)^(-1/30)(120)= 45.92. Therefore, the student will memorize about 45 verbs in two hours.

(a) A student studying a foreign language has 50 verbs to memorize. Suppose the rate at which the student can memorize these verbs is proportional to the number of verbs remaining to be memorized, 50 – y, where the student has memorized y verbs. Initially, no verbs have been memorized.

Suppose 20 verbs are memorized in the first 30 minutes.

For part a) we have to find how many verbs will the student memorize in two hours.

It can be seen that y (the number of verbs memorized) and t (the time elapsed) satisfy the differential equation:

dy/dt

= k(50 – y)where k is a constant of proportionality.

Since the time taken to memorize all the verbs is limited to two hours, we set t = 120 in minutes.

At t

= 30, y = 20 (verbs).

Then, 120 – 30

= 90 (minutes) and 50 – 20

= 30 (verbs).

We use separation of variables to solve the equation and integrate both sides:(1/(50 - y))dy

= k dt

Integrating both sides, we get;ln|50 - y|

= kt + C

Using the initial condition, t = 30 and y = 20, we get:

C = ln(50 - 20) - 30k

Solving for k, we get:

k = (1/30)ln(30/2)Using k, we integrate to find y as a function of t:

ln|50 - y|

= (1/30)ln(30/2)t + ln(15)50 - y

= e^(ln(15))e^((1/30)ln(30/2))t50 - y

= 15(30/2)^(-1/30)t

Therefore,

y = 50 - 15(30/2)^(-1/30)t

Hence, the number of verbs memorized after two hours (t = 120) is:y = 50 - 15(30/2)^(-1/30)(120)

= 45.92

Therefore, the student will memorize about 45 verbs in two hours.

(b) Now, we are supposed to determine after how many hours will the student have only one verb left to memorize.

For this part, we want y

= 1, so we solve the differential equation:

dy/dt

= k(50 – y)with y(0)

= 0 and y(t)

= 1

when t = T.

This gives: k

= (1/50)ln(50/49), so that dy/dt

= (1/50)ln(50/49)(50 – y)

Separating variables and integrating both sides, we get:

ln|50 – y|

= (1/50)ln(50/49)t + C

Using the initial condition

y(0) = 0, we get:

C = ln 50ln|50 – y|

= (1/50)ln(50/49)t + ln 50

Taking the exponential of both sides, we get:50 – y

= 50(49/50)^(t/50)y

= 50[1 – (49/50)^(t/50)]

When y = 1, we get:

1 = 50[1 – (49/50)^(t/50)](49/50)^(t/50)

= 49/50^(T/50)

Taking natural logarithms of both sides, we get:

t/50 = ln(49/50^(T/50))ln(49/50)T/50 '

= ln[ln(49/50)/ln(49/50^(T/50))]T

≈ 272.42

Thus, the student will have only one verb left to memorize after about 272.42 minutes, or 4 hours and 32.42 minutes (approximately).

To know more about Number  visit :

https://brainly.com/question/3589540

#SPJ11

Let N = {x€ R² : x₂ > 0} be the upper half plane of R² with boundary N = {(x₁,0) = R²}. We are supposed to consider the Dirichlet problem (5.2)

The Green's function for (5.2) can be constructed by the image method or reflection principle.The Dirichlet problem is given by (5.2).∆u = 0 in N, u = g(x₁) on N. ….(5.2)

The Green's function for (5.2) can be constructed by the image method or reflection principle, considering the upper half plane. Consider a point x in the upper half plane and a circle C with center x₁ on the x₁-axis and radius x₂ > 0 (a circle with diameter in the x-axis and center x). Denote by R the circle C with its interior, and R' = C with its interior, reflected in the x₁-axis. Thus, R is a disk lying above the x-axis and R' is a disk lying below the x-axis. Let G(x, y) be the Green's function for (5.2) in the upper half plane N. By the reflection principle, we have that u(x) = -u(x), where u(x) is the solution of (5.2) with boundary data g(x). Therefore, by the maximum principle for harmonic functions, we have that

Thus, the Green's function is given by G(x, y) = u(x) - u(y) = u(x) + u(x) = 2u(x) - G(x, y).

Where G(x, y) denotes the reflection of x with respect to the x₁-axis.

The Poisson equation is given by ∆u = f in N, with the boundary condition u = g(x₁) on N, where g is a bounded and continuous function defined on R. In the image method, we take a point x in the upper half plane and consider the disk R centered at x₁ on the x-axis and of radius x₂. We then consider the disk R' which is the reflection of R in the x-axis. By the reflection principle, we have that the solution of the Poisson equation in R and R' are equal except for the sign of the image of the point x under reflection. Let u(x) be the solution of the Poisson equation in R with boundary data g(x) and let G(x, y) be the Green's function for the upper half plane. Then, the solution of the Poisson equation in N is given by (5.3)

u(x) = -∫∫N G(x, y)f(y)dy + ∫R g(y)∂G/∂n(y, x) ds(y),

where n is the unit normal to N at y.The Green's function G(x, y) can be written as

G(x, y) = 2u(x) - G(x, y) by the reflection principle, and hence the solution of the Poisson equation in N is given by

u(x) = -∫∫N G(x, y)f(y)dy + ∫R g(y)∂G/∂n(y, x) ds(y) = -2∫∫N u(y)f(y)dy + 2∫R g(y)∂G/∂n(y, x) ds(y).

By taking the Laplace transform of this equation, we can obtain the solution in terms of the Laplace transform of f and g.(ii) The Poisson equation is given by ∆u = f in N, with the boundary condition u = g(x₁) on N, where g is a bounded and continuous function defined on R. We have obtained the solution of the Poisson equation in (i), which is given by

u(x) = -2∫∫N u(y)f(y)dy + 2∫R g(y)∂G/∂n(y, x) ds(y).

We can now substitute the expression for the Green's function G(x, y) to obtain the solution in terms of the boundary data g(x) and the function u(y).Thus, the solution of the Poisson equation (5.2) with the boundary condition specified in (5.4) is given by

u(x) = ∫R (g(y) - g(x₁))[(x₂ - y₂)² + (x₁ - y₁)²]^{-1} dy₁ dy₂.

The Green's function for (5.2) can be constructed by the image method or reflection principle. We take a point x in the upper half plane and consider the disk R centered at x₁ on the x-axis and of radius x₂. We then consider the disk R' which is the reflection of R in the x-axis. The solution of the Poisson equation in R and R' are equal except for the sign of the image of the point x under reflection. Let u(x) be the solution of the Poisson equation in R with boundary data g(x) and let G(x, y) be the Green's function for the upper half plane. The solution of the Poisson equation in N is given by u(x) = ∫R (g(y) - g(x₁))[(x₂ - y₂)² + (x₁ - y₁)²]^{-1} dy₁ dy₂.

To know more about Laplace transform visit:

brainly.com/question/30759963

#SPJ11

We have proved that AB = CD in the given trapezoid ABCD using the properties of the trapezoid and the circle.

To prove that AB = CD, we will use several properties of the given trapezoid and the circle. Let's start by analyzing the information provided step by step.

AC is the bisector of angle BAD:

This implies that angles BAC and CAD are congruent, denoting them as α.

M is the midpoint of CD:

This means that MC = MD.

The circumcircle of triangle OMD intersects AC again at point K:

Let's denote the center of the circumcircle as P. Since P lies on the perpendicular bisector of segment OM (as it is the center of the circumcircle), we have PM = PO.

BK ⊥ AC:

This states that BK is perpendicular to AC, meaning that angle BKC is a right angle.

Now, let's proceed with the proof:

ΔABK ≅ ΔCDK (By ASA congruence)

We need to prove that ΔABK and ΔCDK are congruent. By construction, we know that BK = DK (as K lies on the perpendicular bisector of CD). Additionally, we have angle ABK = angle CDK (both are right angles due to BK ⊥ AC). Therefore, we can conclude that side AB is congruent to side CD.

Proving that ΔABC and ΔCDA are congruent (By SAS congruence)

We need to prove that ΔABC and ΔCDA are congruent. By construction, we know that AC is common to both triangles. Also, we have AB = CD (from Step 1). Now, we need to prove that angle BAC = angle CDA.

Since AC is the bisector of angle BAD, we have angle BAC = angle CAD (as denoted by α in Step 1). Similarly, we can infer that angle CDA = angle CAD. Therefore, angle BAC = angle CDA.

Finally, we have ΔABC ≅ ΔCDA, which implies that AB = CD.

Proving that AB || CD

Since ΔABC and ΔCDA are congruent (from Step 2), we can conclude that AB || CD (as corresponding sides of congruent triangles are parallel).

Thus, we have proved that AB = CD in the given trapezoid ABCD using the properties of the trapezoid and the circle.

for such more question on trapezoid

https://brainly.com/question/22351006

#SPJ8

The area of the region enclosed by the curves y = 3 cos x and y = 3 cos 2x for 0 ≤ x ≤ T is given by the expression -3/2 sin 2T - 3 sin T.

To find the area of the region enclosed by the curves y = 3 cos x and y = 3 cos 2x for 0 ≤ x ≤ T, we need to calculate the definite integral of the difference between the two functions over the given interval.

The integral for the area can be expressed as:

A = ∫[0,T] (3 cos 2x - 3 cos x) dx

To simplify the integration, we can use the trigonometric identity cos 2x = 2 cos² x - 1:

A = ∫[0,T] (3(2 cos² x - 1) - 3 cos x) dx

= ∫[0,T] (6 cos² x - 3 - 3 cos x) dx

Now, let's integrate term by term:

A = ∫[0,T] 6 cos² x dx - ∫[0,T] 3 dx - ∫[0,T] 3 cos x dx

To integrate cos² x, we can use the double angle formula cos² x = (1 + cos 2x)/2:

A = ∫[0,T] 6 (1 + cos 2x)/2 dx - 3(T - 0) - ∫[0,T] 3 cos x dx

= 3 ∫[0,T] (1 + cos 2x) dx - 3T - 3 ∫[0,T] cos x dx

= 3 [x + (1/2) sin 2x] |[0,T] - 3T - 3 [sin x] |[0,T]

Now, let's substitute the limits of integration:

A = 3 [(T + (1/2) sin 2T) - (0 + (1/2) sin 0)] - 3T - 3 [sin T - sin 0]

= 3 (T + (1/2) sin 2T) - 3T - 3 (sin T - sin 0)

= 3T + (3/2) sin 2T - 3T - 3 sin T + 3 sin 0

= -3/2 sin 2T - 3 sin T

Therefore, the area of the region enclosed by the curves y = 3 cos x and y = 3 cos 2x for 0 ≤ x ≤ T is given by the expression -3/2 sin 2T - 3 sin T.

Learn more about area

https://brainly.com/question/1631786

#SPJ11

In the given statements, the true statements are:

(a) If Yolanda prefers black to red, then I liked the poem.

(b) If Maya heard the radio, then I am in my first period class.

(c) If the play is a success, then my friend has a birthday today. If my friend has a birthday today, then Mary likes the milkshake. If Mary likes the milkshake, then the play is a success.

(a) In the given statement "If I liked the poem, then Yolanda prefers black to red," the contrapositive of this statement is also true. The contrapositive of a statement switches the order of the hypothesis and conclusion and negates both.

So, if Yolanda prefers black to red, then it must be true that I liked the poem.

(b) In the given statement "If Maya heard the radio, then I am in my first period class," we are told that Maya heard the radio.

Therefore, the contrapositive of this statement is also true, which states that if Maya did not hear the radio, then I am not in my first period class.

(c) In the given statements "If the play is a success, then Mary likes the milkshake" and "If Mary likes the milkshake, then my friend has a birthday today," we can derive the transitive property. If the play is a success, then it must be true that my friend has a birthday today. Additionally, if my friend has a birthday today, then it must be true that Mary likes the milkshake.

Finally, if Mary likes the milkshake, then it implies that the play is a success.

To learn more about contrapositive visit:

brainly.com/question/12151500

#SPJ11

The given series, Σ((-1)^n+1)/(n(n+2)), where n starts from 1, is conditionally convergent.

To determine the convergence of the series, we can use the Alternating Series Test. The series satisfies the alternating property since the sign of each term alternates between positive and negative.

Now, let's examine the absolute convergence of the series by considering the absolute value of each term, |((-1)^n+1)/(n(n+2))|. Simplifying this expression, we get |1/(n(n+2))|.

To test the absolute convergence, we can consider the series Σ(1/(n(n+2))). We can use a convergence test, such as the Comparison Test or the Ratio Test, to determine whether this series converges or diverges. By applying either of these tests, we find that the series Σ(1/(n(n+2))) converges.

Since the absolute value of each term in the original series converges, but the series itself alternates between positive and negative values, we conclude that the given series Σ((-1)^n+1)/(n(n+2)) is conditionally convergent.

Learn more about Ratio Test here:

https://brainly.com/question/32701436

#SPJ11

Answer:

The probability of first drawing an F and then again drawing an F (without replacing the first card) is,

P = 1/15

Step-by-step explanation:

There are a total of 6 letters at first

2 of these are Fs

So, the probability of drawing an F would be,

2/6 = 1/3

Then, since we don't replace the card,

there are 5 cards left, out of which 1 is an F

So, the probability of drawing that F will be,

1/5

Hence the total probability of first drawing an F and then again drawing an F (without replacing the first card) is,

P = (1/3)(1/5)

P = 1/15

To find the value of s for which T · y = 5, we need to determine the transformation T and set it equal to the given value.

The transformation T is defined as T(a) = b, where a and b are vectors. In this case, T(a) = b means that T maps vector a to vector b.

Let's calculate the transformation T:

T(a) = T(1, s, 2s + 1)

To find T · y, we need to determine the components of y. From the given equation, we have:

T · y = 5

Expanding the dot product, we have:

(T · y) = 5

(T₁y₁) + (T₂y₂) + (T₃y₃) = 5

Substituting the components of T(a), we have:

(2, 2, 3) · y = 5

Now, we can solve for y:

2y₁ + 2y₂ + 3y₃ = 5

Since y is a vector, we can rewrite it as y = (y₁, y₂, y₃). Substituting this into the equation above, we have:

2y₁ + 2y₂ + 3y₃ = 5

Now, we can solve for s:

2(1) + 2(s) + 3(2s + 1) = 5

2 + 2s + 6s + 3 = 5

8s + 5 = 5

s = 0

Therefore, the value of s for which T · y = 5 is s = 0.

Learn more about dot product here:

https://brainly.com/question/30404163

#SPJ11

The given system of equations is:y = 2x - 1y = -3x + 4The objective is to check which statement is correct about the solution to this system of equations, by using the graph.

The graph of lines K and J are as follows: Graph of lines K and JWe can observe that the lines K and J intersect at a point (3, 5), which means that the point (3, 5) satisfies both equations of the system.

This means that the point (3, 5) is a solution to the system of equations. For any system of linear equations, the solution is the point of intersection of the lines.

Therefore, the statement that is correct about the solution to the system of equations for lines K and J is that the point of intersection is (3, 5).

Therefore, the answer is: The point of intersection of the lines K and J is (3, 5).

For more such questions on equations

https://brainly.com/question/29174899

#SPJ8

To determine the rank and nullity of matrix A, we need to perform row reduction to its reduced row echelon form (RREF).

The given matrix A is:

A = [1 1 -1; 1 1 -1; 1 -1 1; -1 1 -1]

Performing row reduction on matrix A:

R2 = R2 - R1

R3 = R3 - R1

R4 = R4 + R1

[1 1 -1; 0 0 0; 0 -2 2; 0 2 0]

R3 = R3 - 2R2

R4 = R4 - 2R2

[1 1 -1; 0 0 0; 0 -2 2; 0 0 -2]

R4 = -1/2 R4

[1 1 -1; 0 0 0; 0 -2 2; 0 0 1]

R3 = R3 + 2R4

R1 = R1 - R4

[1 1 0; 0 0 0; 0 -2 0; 0 0 1]

R2 = -2 R3

[1 1 0; 0 0 0; 0 1 0; 0 0 1]

Now, we have the matrix in its RREF. We can see that there are three pivot columns (leading 1's) in the matrix. Therefore, the rank of matrix A is 3.

To find the nullity, we count the number of non-pivot columns, which is equal to the number of columns (in this case, 3) minus the rank. So the nullity of matrix A is 3 - 3 = 0.

Now, to find [5] (5), we need more information or clarification about what you mean by [5] (5). Please provide more details or rephrase your question so that I can assist you further.

To know more about matrix visit:

brainly.com/question/29132693

#SPJ11

The flux of the vector field F(x, y, z) = (5xz, −5yz, 5xy + z) through the surface S of the box E = {(x, y, z) | 0 ≤ x ≤ 2, 0 ≤ y ≤ 3, 0 ≤ z ≤ 4}, oriented outward is -29/3.

The Divergence Theorem states that the outward flux of a vector field through a closed surface is equal to the volume integral of the divergence of the vector field over the enclosed region.

The given question is to compute the flux of the vector field F(x, y, z) = (5xz, −5yz, 5xy + z) through the surface S of the box

E = {(x, y, z) | 0 ≤ x ≤ 2, 0 ≤ y ≤ 3, 0 ≤ z ≤ 4}, oriented outward.

First, we find the divergence of the vector field.

Let F(x, y, z) = (P(x, y, z), Q(x, y, z), R(x, y, z)).

Then, the divergence of F is given by

div F= ∂P/∂x + ∂Q/∂y + ∂R/∂z.

For F(x, y, z) = (5xz, −5yz, 5xy + z),

we have

P(x, y, z) = 5xz, Q(x, y, z)

= -5yz, and R(x, y, z) = 5xy + z.

Then, ∂P/∂x = 5z, ∂Q/∂y = -5z, ∂R/∂z = 1.

The divergence of F is

div F = ∂P/∂x + ∂Q/∂y + ∂R/∂z

= 5z - 5z + 1

= 1.

Thus, we have the volume integral of the divergence of F over the box E as

∭E div F dV= ∫₀⁴∫₀³∫₀² 1 dx dy dz

= (2-0) (3-0) (4-0)

= 24.

The outward normal vector to the six faces of the box is (1, 0, 0), (-1, 0, 0), (0, 1, 0), (0, -1, 0), (0, 0, 1), and (0, 0, -1), respectively.

Since the surface S is closed, we only need to compute the flux through the five faces of the box, since the flux through the sixth face is equal to the negative of the sum of the fluxes through the other five faces.

Now, we need to find the surface area of each face of the box and the dot product of the vector field and the outward normal vector at each point on the surface.

Let's consider each face of the box one by one.

The flux through the first face x = 0 is given by

∫(0,3)×(0,4) F(0, y, z) ⋅ (-1, 0, 0) dy dz

= ∫₀⁴∫₀³ (-5yz)(-1) dy dz

= ∫₀⁴ (15y) dz

= 60.

The flux through the second face x = 2 is given by

∫(0,3)×(0,4) F(2, y, z) ⋅ (1, 0, 0) dy dz

= ∫₀⁴∫₀³ (10z - 10yz) dy dz

= ∫₀⁴ (15z - 5z²) dz

= 100/3.

The flux through the third face y = 0 is given by

∫(0,2)×(0,4) F(x, 0, z) ⋅ (0, -1, 0) dx dz

= ∫₀⁴∫₀² (0)(-1) dx dz= 0.

The flux through the fourth face y = 3 is given by

∫(0,2)×(0,4) F(x, 3, z) ⋅ (0, 1, 0) dx dz

= ∫₀⁴∫₀² (-15x)(1) dx dz

= -60.

The flux through the fifth face z = 0 is given by

∫(0,2)×(0,3) F(x, y, 0) ⋅ (0, 0, -1) dx dy

= ∫₀³∫₀² (-5xy)(-1) dx dy

= -15.

The flux through the sixth face z = 4 is given by -

∫(0,2)×(0,3) F(x, y, 4) ⋅ (0, 0, 1) dx dy

= -∫₀³∫₀² (5xy + 4)(1) dx dy

= -116/3.

The total outward flux of F through the surface S is the sum of the fluxes through the five faces of the box as follows

∑Flux = 60 + 100/3 + 0 - 60 - 15 - 116/3

= -29/3.

Know more about the Divergence Theorem

https://brainly.com/question/17177764

#SPJ11

Annihilator Method: To solve the differential equation ý + ùy + 5y = xe using the annihilator method, we will first find the particular solution and then combine it with the complementary solution.

Step 1: Find the particular solution:

We need to find a particular solution for the non-homogeneous equation ý + ùy + 5y = xe. Since the right-hand side is xe, we can guess a particular solution of the form yp(x) = A x^2 + B x + C, where A, B, and C are constants to be determined.

Taking the derivatives:

yp'(x) = 2A x + B,

yp''(x) = 2A.

Substituting these into the differential equation:

(2A) + ù(2A x + B) + 5(A x^2 + B x + C) = xe.

Matching the coefficients of the like terms:

2A + ùB + 5C = 0, 2A + 5B = 1, 5A = 0.

From the last equation, we get A = 0. Substituting this back into the second equation, we get B = 1/5. Substituting A = 0 and B = 1/5 into the first equation, we get C = -2/25.

So, the particular solution is yp(x) = (1/5)x - (2/25).

Step 2: Find the complementary solution:

The complementary solution is found by solving the associated homogeneous equation ý + ùy + 5y = 0. The characteristic equation is obtained by replacing ý with r and solving for r:

r + ùr + 5 = 0.

Solving the quadratic equation, we find two distinct roots: r1 and r2.

Step 3: Combine the particular and complementary solutions:

The general solution of the differential equation is given by y(x) = yc(x) + yp(x), where yc(x) is the complementary solution and yp(x) is the particular solution.

Variation of Parameters Method:

To solve the differential equation ý + ùy + 5y = xe using the variation of parameters method, we assume the solution to be of the form y(x) = u(x)v(x), where u(x) and v(x) are unknown functions.

Step 1: Find the derivatives:

We have y'(x) = u'(x)v(x) + u(x)v'(x) and y''(x) = u''(x)v(x) + 2u'(x)v'(x) + u(x)v''(x).

Step 2: Substitute into the differential equation:

Substituting the derivatives into the differential equation, we get:

(u''(x)v(x) + 2u'(x)v'(x) + u(x)v''(x)) + ù(u'(x)v(x) + u(x)v'(x)) + 5u(x)v(x) = xe.

Simplifying and rearranging terms, we get:

u''(x)v(x) + 2u'(x)v'(x) + u(x)v''(x) + ùu'(x)v(x) + ùu(x)v'(x) + 5u(x)v(x) = xe.

Step 3: Solve for u'(x) and v'(x):

Matching the coefficients of like terms, we get the following equations:

u''(x) + ùu'(x) + 5u(x) = 0, and

v''(x) + ùv'(x) = x.

Step 4: Solve for u(x) and v(x):

Solve the first equation to find u(x) and solve the second equation to find v(x).

Step 5: Find the general solution:

The general solution of the differential equation is given by y(x) = u(x)v(x) + C, where C is the constant of integration.

Learn more about differential equation here:

https://brainly.com/question/32524608

#SPJ11

Therefore, f(g(0)) = 11 and g(f(0)) = -3.

For the given functions:

f(x) = 3x - 1

g(x) = 4 - 7x²

We are asked to find f(g(0)) and g(f(0)).

To find f(g(0)), we substitute 0 into the function g(x) and then substitute the result into the function f(x):

g(0) = 4 - 7(0)²

= 4 - 7(0)

= 4

Now, we substitute the value of g(0) into the function f(x):

f(g(0)) = f(4)

= 3(4) - 1

= 12 - 1

= 11

So, f(g(0)) = 11.

To find g(f(0)), we substitute 0 into the function f(x) and then substitute the result into the function g(x):

f(0) = 3(0) - 1

= -1

Now, we substitute the value of f(0) into the function g(x):

g(f(0)) = g(-1)

= 4 - 7(-1)²

= 4 - 7(1)

= 4 - 7

= -3

So, g(f(0)) = -3.

Therefore, f(g(0)) = 11 and g(f(0)) = -3.

To learn more about functions visit:

brainly.com/question/30721594

#SPJ11

To sketch the graph of the function f(x) = (13x^3 - 240x^2 - 2460x + 585000) / 75000 for 0 ≤ x ≤ 40, we can follow these steps:

1. Find the y-intercept: Substitute x = 0 into the equation to find the value of f(0).

  f(0) = 585000 / 75000

  f(0) = 7.8

2. Find the x-intercepts: Set the numerator equal to zero and solve for x.

  13x^3 - 240x² - 2460x + 585000 = 0

  You can use numerical methods or a graphing calculator to find the approximate x-intercepts. Let's say they are x = 9.2, x = 15.3, and x = 19.5.

3. Find the critical points: Take the derivative of the function and solve for x when f'(x) = 0.

  f'(x) = (39x² - 480x - 2460) / 75000

  Set the numerator equal to zero and solve for x.

  39x² - 480x - 2460 = 0

  Again, you can use numerical methods or a graphing calculator to find the approximate critical points. Let's say they are x = 3.6 and x = 16.4.

4. Determine the behavior at the boundaries and critical points:

  - As x approaches 0, f(x) approaches 7.8 (the y-intercept).

  - As x approaches 40, calculate the value of f(40) using the given equation.

  - Evaluate the function at the x-intercepts and critical points to determine the behavior of the graph in those regions.

5. Plot the points: Plot the y-intercept, x-intercepts, and critical points on the graph.

6. Sketch the curve: Connect the plotted points smoothly, considering the behavior at the boundaries and critical points.

Learn more about function here:

brainly.com/question/30721594

#SPJ11

Use at least 3 decimals in your calculations in this question. A group of economists would like to study the gender wage gap, In a random sample of 350 male workers, the mean hourhy wage was 14.2, and the standard deviation was 2.2. In an independent random sample of 250 female workers, the mean hocirly wage was 13.3, and the standard devlation Was 1.4. 1. The cconomists would like to test the null hypothesis that the mean hourly wage of male and female workers are the same, against the aiternative hypothesis that the mean wages are different. Use the reiection region approach to conduct the hypothesis test, at the 5% significance level. Be sure to include the sample statistic; its sampling distribution; and the reason why the sampling distritution is valid as part of your answer. 2. Calculate the 95% confidence interval for the difference between the popiation means that can be used to test the researchers nuill hypothesis (stated above) 3. Calculate the p-value. If the significance level had been 1% (instead of 58 ). What would the conclusion of the fipothesis test have bect?

In part (a), we prove that if A is an eigenvalue of a matrix A, then A² is an eigenvalue of A². In part (b), we determine whether every eigenvector of A² is also an eigenvector of A.

(a) To prove that if A is an eigenvalue of A, then A² is an eigenvalue of A², we can use the properties of eigenvalues and eigenvectors. Let v be an eigenvector of A corresponding to eigenvalue A. We have Av = A²v since A²v = A(Av). Therefore, A²v is a scalar multiple of v, implying that A² is an eigenvalue of A² with eigenvector v.

(b) It is not always true that every eigenvector of A² is also an eigenvector of A. We can provide a counterexample to illustrate this. Consider the matrix A = [[0, 1], [0, 0]]. The eigenvalues of A are λ = 0 with multiplicity 2. The eigenvectors corresponding to λ = 0 are any nonzero vectors v = [x, 0] where x is a complex number. However, if we compute A², we have A² = [[0, 0], [0, 0]]. In this case, the only eigenvector of A² is the zero vector [0, 0]. Therefore, not every eigenvector of A² is an eigenvector of A.

Hence, we have shown by example that it is not always true that every eigenvector of A² is also an eigenvector of A.

Learn more about matrix here:

https://brainly.com/question/29132693

#SPJ11

The statement is known as the constructibility of real numbers. It states that a real number r is constructible.

If there exist a sequence of real numbers 0₁, ..., 0ₙ such that 0₁ is rational, 0ᵢ for i = 2, ..., n are quadratic numbers (numbers of the form √a, where a is a rational number), and r can be expressed as a nested quadratic extension of rational numbers using the sequence 0₁, ..., 0ₙ.

To prove the statement, we need to show both directions: (1) if r is constructible, then there exist 0₁, ..., 0ₙ satisfying the given conditions, and (2) if there exist 0₁, ..., 0ₙ satisfying the given conditions, then r is constructible.

The first direction follows from the fact that constructible numbers can be obtained through a series of quadratic extensions, and quadratic numbers are closed under addition, subtraction, multiplication, and division.

The second direction can be proven by demonstrating that the operations of nested quadratic extensions can be used to construct any constructible number.

In conclusion, the statement is true, and a real number r is constructible if and only if there exist 0₁, ..., 0ₙ satisfying the given conditions.

To know more about real numbers click here: brainly.com/question/31715634
#SPJ11

Answer:

4x - 8 + 5x + 26 = 180

9x + 18 = 180

9x = 162

x = 18

angle FGD = angle CGE = 4(18) - 8 = 64°

angle EGD = angle CGF = 5(18) + 26 = 116°

To find the tangent line to the function f(x) = √(x) + 9 at x = 4, we can use the derivative f'(x) obtained in part 2. The slope of the tangent line at x = 4 is given by f'(4) = 26. The tangent line passes through the point (4, √13) on the graph of f. Therefore, the equation for the tangent line at x = 4 is y = 26x + √13.

To calculate the slope of the tangent line at x = 4, we use the derivative f'(x) obtained in part 2, which is f'(x) = 1/(2√x). Evaluating f'(4), we have f'(4) = 1/(2√4) = 1/4 = 0.25.

The tangent line passes through the point (4, √13) on the graph of f. This point represents the coordinates (x, f(x)) at x = 4, which is (4, √(4) + 9) = (4, √13).

Using the point-slope form of a line, we can write the equation of the tangent line as:

y - y₁ = m(x - x₁), where m is the slope and (x₁, y₁) is the given point on the line.

Substituting the values, we have:

y - √13 = 0.25(x - 4)

y - √13 = 0.25x - 1

y = 0.25x + √13 - 1

y = 0.25x + √13 - 1

Therefore, the equation for the tangent line to f at x = 4 is y = 0.25x + √13 - 1, or equivalently, y = 0.25x + √13.

To learn more about tangent line click here : brainly.com/question/31617205

#SPJ11