Answer:
hola no ablo inglés porfavor
Annie has a soccer ball and a kickball. She kicks each ball with the same force. The soccer ball accelerates at 3 m/s2, and the kickball accelerates at 5 m/s2. Use Newton’s laws to describe why the kickball has a greater acceleration.
Also sorry its actually science
How many grams of KCI can be dissolved in 63.5. g of water at 80
Answer:
35.8 g
Explanation:
Step 1: Given data
Mass of water: 63.5 g
Step 2: Calculate how many grams of KCl can be dissolved in 63.5. g of water at 80 °C
Solubility is the maximum amount of solute that can be dissolved in 100 g of solute at a specified temperature. The solubility of KCl at 80 °C is 56.3 g%g, that is, we can dissolve up to 56.3 g of KCl in 100 g of water.
63.5 g Water × 56.3 g KCl/100 g Water = 35.8 g KCl
What is the pH of a solution in which [OH-] = 1.0 x 10-2 M
Answer:
12
Explanation:
pOH = -log(1.0 x 10^-2) = 2
pH = 14 - pOH
pH = 14 - 2 = 12
1.
Events in which molten rock spews out of
the mantle as ash, lava, and gases
Answer:
Landslides, Volcanoes, Earthquakes, and Floods. A opening in the Earth's surface through which melted rock, gases, and ash escape. Events in which molten rock spews out from the mantle to the surface of Earth as ash, lava, and gases
Explanation:
hello guys,
differentiate between vapourisation and evaporation
Answer:
vapourisation can occur from solid or liquid into a gas but evaporation is straight from a liquid and is often below boiling temperature while vapourisation is often above boiling temperature
Answer:
[tex] \huge\red{\boxed{\mathfrak{Hello}}}[/tex]
[tex]\underline\blue{\textsf{\textbf{Question-}}}[/tex]
Differences between Vaporization & Evaporation:-[tex]{\huge\pink{\fbox{{࿐αɴѕωєя࿐}}}}[/tex]
[tex] \huge\green{ \mid{ \underline{ \overline{ \tt PARAMETERS: }} \mid}}[/tex]
DefinitionTransition of stateSpeed of processEffect areaMovement of molecule[tex] \huge\purple{ \mid{ \underline{ \overline{ \tt VAPORIZATION: }} \mid}}[/tex]
It is defined as the transitional phase of a compound or an element at the boiling temperature.It changes the state of matter from a solid or liquid to a gas.It is generally happening at a fast pace and also it needs less amount of energy.During the vaporization process, all of the water turns into a gas.During vaporization, molecules may come from below the surface of liquid also.[tex] \huge\orange{ \mid{ \underline{ \overline{ \tt EVAPORATION:}} \mid}}[/tex]
It is nothing but a special kind of vaporization and mostly occurring at the temperature below the boiling point.It changes the liquid state of the matter directly into a gas.It is generally a slower process that needs more energy.During the evaporation process, only the top level of water turn into gas.During evaporation, molecules vaporize from the surface of liquid only.➳ ʰᵒᵖᵉ ⁱᵗ ʰᵉˡᵖˢ
[tex] \huge\pink{ \mid{ \underline{ \overline{ \tt ꧁❣ RainbowSalt2222 ࿐ }} \mid}}[/tex]
Which element has the highest electronegativity?
Answer:
fluorine
Explanation:
Answer:
The element with the highest electronegativity is fluorine with a score of 4.0 (which is the highest possible)
Explanation:
I personally haven't gotten this question yet so I hope this helps you!
If you have 0.50 L of 0.45 M sodium bromide. How many grams of sodium bromide are present?
Answer:
23.175g
Explanation:
0.45 mole of NaBr is in 1 liter
? moles of NaBr is in 0.50 liter
0.50 × 0.45 = 0.225 of NaBr
1 mole of NaBr = 23 + 80 = 103g
0.225 moles of NaBr = ?
0.225 × 103 = 23.175g
What is the ph of H2SO4?
Answer:
H2SO4 sulfuric acid 2.75
Explanation:
I hope it will help you
A una mezcla de 300g, formada con 60% P/P de Hierro y 40% P/P de Arena, se le adicionan 135g de Cobre y 2,77g de Aluminio. ¿Cuál es la concentración final P/P de cada uno de los componentes?
Answer:
[tex]\%P/P_{hierro}=41.1\%\\\\\%P/P_{arena}=24.4\%\\\\\%P/P_{cobre}=30.8\%\\\\\%P/P_{aluminio}=0.6\%[/tex]
Explanation:
¡Hola!
En este caso, dado que estamos tratando con problem sobre porcentaje peso/peso de hierro, arena, cobre y aluminio, primero debemos calcular la masa inicial de estos dos primeros en la mezcla original de acuerdo con:
[tex]m_{hierro}=300g*0.60=180g\\\\m_{arena}=300*0.40=120g[/tex]
Ahora si podemos calcular la masa de la mezcla final como la suma de las masas de todos los constituyentes de la mezcla:
[tex]m_T=180g+120g+135g+2.77g=437.77g[/tex]
Finalmente, podemos calcular los porcentajes P/P como se muestra a continuación:
[tex]\%P/P_{hierro}=\frac{180g}{437.77g} *100\%=41.1\%\\\\\%P/P_{arena}=\frac{120g}{437.77g} *100\%=24.4\%\\\\\%P/P_{cobre}=\frac{135g}{437.77g} *100\%=30.8\%\\\\\%P/P_{aluminio}=\frac{g}{437.77g} *100\%=0.6\%[/tex]
¡Saludos!
1) For the equation in the picture, write down the molecular formula for each of the following species in the reaction:
a) Acid
b) Base
c) Conjugate Acid
d) Conjugate Base
2) In your own words, what is a Bronsted-Lowry Acid?
Answer:
yo no ablo inglés amigos jjjj
I come in many different colors and I get bigger when I’m full. I will float away if you don’t tie me down and I will make a loud sound if I break. What am I?
i'm b.o.r.e.d
Answer:
BalloonExplanation:
It comes in different colors, it expands when it's "full". It floats away if it is not tied down and will make a loud noise if it pops (breaks).
is visible light considered matter true or false
Answer:
Explanation:
false
If there are 3 moles of gas A, 4 moles of gas b and 5 moles of gas c I'm a mixture of gases and the pressure A is found to be 2.5 atm, what is the total pressure of the sample of gases
Answer:
Total pressure = 10 atm
Explanation:
The excersise can help to understant the concept of mole fraction
Mole fraction is defined as:
moles of gas / Total moles = pressure of that gas / Total pressure
Both can be summed.
Sum of moles of each gas in the mixture = Total moles
Sum of pressures of each gas in the mixture = Total pressure
Those, are laws for gases.
Total moles: 3 mol of gas A + 4 moles of gas B + 5 moles of C
= 12 total moles
Pressure of A is 2.5 atm.
We replace data at the mole fraction relation
moles of A / total moles = Pressure of A / Total pressure
3 moles / 12 moles = 2.5 atm / Total pressure
Total pressure = 2.5 atm / (3mol/12mol)
Total pressure = 10 atm
topic:
surface area
(multiple choice)
irrelevant answers will be reported
What type of waves is produced by moving or vibrating objects
Answer:
Mechanical Sound Waves
A mechanical wave is a wave that depends on the oscillation of matter, meaning that it transfers energy through a medium to propagate. These waves require an initial energy input that then travels through the medium until the initial energy is effectively transferred. Examples of mechanical waves in nature include water waves, sound waves, seismic waves and internal water waves, which occur due to density differences in a body of water. There are three types of mechanical waves: transverse waves, longitudinal waves, and surface waves.
Why is sound a mechanical wave? Sound waves move through air by displacing air particles in a chain reaction. As one particle is displaced from its equilibrium position, it pushes or pulls on neighboring molecules, causing them to be displaced from their equilibrium. As particles continue to displace one another with mechanical vibrations, the disturbance is transported throughout the medium. These particle-to-particle, mechanical vibrations of sound conductance qualify sound waves as mechanical waves. Sound energy, or energy associated with the vibrations created by a vibrating source, requires a medium to travel, which makes sound energy a mechanical wave.
https://www.pasco.com/products/guides/sound-waves
this website tech you about wave, so learn it!!!
A team of scientists claim that they have discovered a new experimental
method for determining percent composition. Which of the following is
necessary for the claim to be considered valid?
A. The method must support the law of conservation of mass.
B. The percent compositions for any two compounds made from the
same elements must be the same.
C. Each atom must contribute the same mass to the compound.
D. All scientists using the new method must get the same results.
Answer:
Option C
Explanation:
The new method must support the law of definite proportions which means that if one mole of compound is distributed percentage wise then the sum of % share of each element must be equal to one mole of compound and this percentage distribution always remains the same in all conditions
Hence, option C is correct
What is the measure of the indicated angle? 37∘ 53∘ 180∘ 127∘
Answer:
53∘
plz mark me as brainliest.
How many moles of calcium oxide are formed when 3 moles of calcium react with oxygen?
Answer:
3 moles of calcium oxide are formed
Explanation:
Based on the reaction of Calcium Ca, with oxygen, O₂, to produce calcium oxide, CaO is:
2Ca + O₂ → 2CaO
where 2 moles of calcium produce 2 moles of Calcium oxide.
That means, if 3 moles of Ca react in presence of oxygen:
3 moles of calcium oxide are formed
In order to expand agriculture and urban areas to meet increased demand for growing populations, water supplies often have to be diverted. In three to five sentences, construct a potential chain of consequences for what could happen when water is diverted from large bodies like lakes and rivers
Answer:
Decrease occur in the amount and flow of water bodies.
Explanation:
There is decrease in the amount and flow of water from water bodies such as rivers and lakes etc occur when the river is diverted from large water bodies because the water flows to the diverted sides and decrease occurs in the amount of water in the rivers and lakes. Those regions from where this river passes can also be negatively affected due to low amount of water they receives for their daily needs or for cultivation of crops so we can say that this diversion has adverse effect on other populations.
Question 7 of 10
What coefficient would the OZ have after balancing C3Hs + O2 → CO2 + H20?
O A 5
OB. 4
O c. 2
OD 3
SUBMIT
Answer:
A.5
Explanation:
What is the relationship of tissues to cells?
Tissues make cells.
Cells make up tissues.
Tissues are use for cell growth.
Cells help tissue grow.
How many oxygen atoms are in 75 g of so3
Explanation:
nso3=75/80 (80=Mr of so3)
n of o= 75x3/80
x of o= 75x3/80x6.02x10 powered by 23
then, the anwer is
[tex] {10}^{23} \times 16.93125[/tex]
sry if im wrong
There are approximately 1.204 x 10²⁴ oxygen atoms in 75 g of SO₃.
To calculate the number of oxygen atoms in 75 g of SO₃, we need to consider the molar mass of SO₃ and Avogadro's number.
The molar mass of SO₃ is calculated as follows:
Sulfur (S) = 32.07 g/mol
Oxygen (O) = 3 x 16.00 g/mol = 48.00 g/mol
Total molar mass of SO₍ = 32.07 g/mol + 48.00 g/mol = 80.07 g/mol
Next, we need to determine the number of moles of SO₃ in 75 g:
moles = mass / molar mass = 75 g / 80.07 g/mol ≈ 0.9369 mol
Since each molecule of SO₃ contains 3 oxygen atoms, we can calculate the number of oxygen atoms by multiplying the number of moles of SO₃ by Avogadro's number (6.022 x 10²³ atoms/mol) and then multiplying by 3:
Number of oxygen atoms = 0.9369 mol x 6.022 x 10²³ atoms/mol x 3 = 1.604 x 10²⁴ atoms
Therefore, there are approximately 1.204 x 10²⁴ oxygen atoms in 75 g of SO₃.
To learn more about atoms, here
https://brainly.com/question/1566330
#SPJ2
How many moles of Manganese there in are 5.76 x 10(15) atoms of Mn?
How many moles of sodium chloride are in a 431.6 g sample of NaCl?
Answer:
1. 9.57 × 10^-9 moles.
2. 7.38mol
Explanation:
1.) To find the number of moles there are in the number of particles in an atom, we divide the number of particles (nA) by Avagadro's constant (6.02 × 10^23)
Hence, to find the number of moles (n) of Manganese (Mn), we say:
5.76 x 10^15 atoms ÷ 6.02 × 10^23
5.76/6.02 × 10^(15-23)
= 0.957 × 10^-8
= 9.57 × 10^-9 moles.
2.) Mole = mass/molar mass
Molar mass of sodium chloride (NaCl) = 23 + 35.5
= 58.5g/mol
mole = 431.6 g ÷ 58.5g/mol
mole = 7.38mol
please help me with question A and B pleaseeeeee
Answer:
♀️?sorryyyyyyyyyyyyy
anybody still woke ???
Answer:
yep.. I am wide awake here.
yep
ExPlAnAtIoN:
yezs and nozs
A nuclide is defined as?
Answer:
Nuclide, , also called nuclear species, species of atom as characterized by the number of protons, the number of neutrons, and the energy state of the nucleus. ... The term nuclide is not synonymous with isotope, which is any member of a set of nuclides having the same atomic number but differing mass number.
Explanation:
Answer:
a distance isotope of an atom
Explanation:
How many dm3 of hydrogen are released when 3 g of potassium is reacted with hydroiodic acid?
Answer:
V = 0.0859dm³
Explanation:
Hydroiodic acid, HI, reacts with potassium, K, to produce potassium iodide, KI, and hydrogen, as follows:
2HI + 2K → 2KI + H₂(g)
To solve this question we have to find the moles of hydrogen produced knowing that 2 moles of K produce 1 mole of H₂. With the moles of hydrogen we can find the volume of hydrogen assuming there are STP conditions:
Moles K -Molar mass: 39.0983g/mol-
3g * (1mol / 39.0983g) = 0.0767 moles of K
Moles H₂:
0.0767 moles of K * (1mol H₂ / 2mol K) = 0.03836 moles H₂
Using: PV = nRT; V = nRT / P
Where V is volume in dm³,
n are moles of gas: 0.03836 moles,
R is gas constant = 0.082atm*dm³/molK
T is absolute temperature = 273.15K at STP
and P is pressure = 1atm
The volume of the gas is:
V = 0.03836mol*0.082atm*dm³/molK*273.15K / 1atm
V = 0.0859dm³Which bone mineral stores fat?
spongy bone
red bone marrow
yellow bone marrow
What is the freezing point of a solution that has 5.0 moles of Nal in 1250 g of water? (K = 1.86°C/m; molar
mass of water = 18.0 g)
what can you infer about aspirin’s ester group?
A. It provides aspirin’s pain-killing ability.
B. It makes the compound more digestible.
C. It reduces fevers.
It's B
Answer:
Option B, aspirin’s ester group provides greater digestibility to aspirin
Explanation:
Aspirin ester group has three parts
carboxylic acid functional group (R-COOH) ester functional group (R-O-CO-R') aromatic group (benzene ring)Aspirin is a weak acid and hence it cannot dissolve in water readily. The reaction of Aspirin ester group with water is as follows -
aspirin
(acetylsalicylic acid) + water → salicylic acid + acetic acid
(ethanoic acid)
Aspirin passes through the stomach and remains unchanged until it reaches the intestine where it hydrolyses ester to form the active compound.
