The question is incomplete, the complete question is:
The element tin has the following number of electrons per shell: 2.8. 18, 18, 4. Notice that the number of electrons in the outer shell of a tin atom is the same as that for a carbon atom. Therefore, what must be true of tin? Tin is a polar atom and can bind to other polar atoms. Tin has a high molecular weight to give tin-containing molecules greater stabilty. All of the above Tin conform single covalent bonds with other elements, but not double or triple covalent bonds Tincan bind to up to four elements at a time
Answer:
Tin can bind to up to four elements at a time
Explanation:
Certain important points were made in the question about tin and one of them is that tin is an element in the same group as carbon hence it has the same number of valence electrons as carbon.
Carbon is always tetra valent. The tetra valency of carbon is the idea that carbon forms four bonds.
If tin has the same number of valence electrons as carbon, then, tin can bind to up to four elements at a time
The sp of strontium carbonate, SrCO3, is 5.60×10−10 . Calculate the solubility of this compound in g/L.
Answer:
3.50 × 10⁻³ g/L
Explanation:
Step 1: Make an ICE chart for the solution of SrCO₃
"S" represents the molar solubility.
SrCO₃(s) ⇄ Sr²⁺(aq) + CO₃²⁻(aq)
I 0 0
C +S +S
E S S
The solubility product constant (Ksp) is:
Ksp = [Sr²⁺] [CO₃²⁻] = S²
S = √Ksp = √5.60 × 10⁻¹⁰ = 2.37 × 10⁻⁵ M
Step 2: Convert "S" to g/L
The molar mass of SrCO₃ is 147.63 g/mol.
2.37 × 10⁻⁵ mol/L × 147.63 g/mol = 3.50 × 10⁻³ g/L
An infant acetaminophen suspension contains 80 mg/0.80 mL suspension. The recommended dose is 15 mg/kg body weight.
How many milliliters of this suspension should be given to an infant weighing 13 lb.
Answer:
0.8853 mL
Explanation:
First we convert 13 lb to kg, keeping in mind that 1 lb = 0.454 kg:
13 lb * [tex]\frac{0.454kg}{1lb}[/tex] = 5.902 kgThen we calculate how many mg of acetaminophen should be given, using the recommended dose and infant mass:
15 mg/kg * 5.902 kg = 88.53 mgFinally we calculate the required mL of suspension, using its concentration:
88.53 mg ÷ (80 mg/0.80 mL) = 0.8853 mLEmily spills concentrated sodium hydroxide solution on her lab bench. What she should do first?
Answer:
Explanation: hell noo
Use the following information to calculate the concentration, Ka and pka for an unknown monoprotic weak acid. (8 pts.) 20.00 mL
Volume of unknown weak acid used : 20.00 mL Total volume of 0.20 M NaOH required to reach the equivalence point: 18.50 mL Initial pH of the weak acid 2.87
Answer:
Concentration: 0.185M HX
Ka = 9.836x10⁻⁶
pKa = 5.01
Explanation:
A weak acid, HX, reacts with NaOH as follows:
HX + NaOH → NaX + H2O
Where 1 mole of HX reacts with 1 mole of NaOH
To solve this question we need to find the moles of NaOH at equivalence point (Were moles HX = Moles NaOH).
18.50mL = 0.01850L * (0.20mol / L) = 0.00370 moles NaOH = Moles HX
In 20.0mL = 0.0200L =
0.00370 moles HX / 0.0200L = 0.185M HX
The equilibrium of HX is:
HX(aq) ⇄ H⁺(aq) + X⁻(aq)
And Ka is defined as:
Ka = [H⁺] [X⁻] / [HX]
Where [H⁺] = [X⁻] because comes from the same equilibrium
As pH = 2.87, [H+] = 10^-pH = 1.349x10⁻³M
Replacing:
Ka = [H⁺] [H⁺] / [HX]
Ka = [1.349x10⁻³M]² / [0.185M]
Ka = 9.836x10⁻⁶
pKa = -log Ka
pKa = 5.01What is the molar mass of Na2SO4?
O A. 142.04 g/mol
O B. 71.05 g/mol
O c. 238.22 g/mol
O D. 94.04 g/mol
Answer: A. 142.04 g/mol
Explanation:
How much energy does an X-ray with an 8 nm (8 x 10-9m) wavelength have?
A. 1.99 x 10-25 J
B. 3.33 x 1016 J
C. 2.48 x 10-17 j
D. 8.28 x 10-26 J
Answer:
it would be option C
Explanation:
Speed of light = 3×10^8m/s
Planck's constant = 6.626×10^-34 Js
Wavelength = 8 x 10^-9 m
Energy = [(3×10^8) * (6.626×10^-34)] / 8 x 10^-9
Energy = [19.878×10^(8-34)] / 8 x 10^-9
Energy = 2.48475 × 10^(-26+9)
Energy = 2.48×10^-17 J
1. Determine the volume of SO2 (at STP) formed from the reaction of 96.7 mol FeS2 and 55.0 L of O2 at 358 K and 1.20 atm.
4 FeS2(s) + 11O2(g) 2Fe2O3(s) + 8SO2(g)
Answer:
40.0L of SO2 are produced
Explanation:
To solve this question we need to find the moles of O2 using PV = nRT in order to find the moles. Thus, we can find the limiting reactant and the moles (And volume) of SO2 produced as follows:
Moles O2:
n = PV/RT
n = 1.20atm*55.0L / 0.082atmL/molK*358K
n = 2.25 moles of O2.
Clearly, limiting reactant is O2.
The moles of SO2 produced are:
2.25 moles of O2 * (8mol SO2 / 11mol O2) = 1.6351 moles SO2
Volume SO2:
V = nRT/P
V = 1.6351 moles SO2*0.082atmL/molK*358K / 1.20atm
V = 40.0L of SO2 are produced
Identify the compound with the lowest dipole moment. Identify the compound with the lowest dipole moment. CH3CH2CH3 CH3OCH3 CH3CHO CH3OH CH3CN
Answer:
CH3CH2CH3
Explanation:
Dipole moment is the measure of the polarity of a chemical bond. It is the extent of charge separation in a molecule.
Dipole moment is the product of the magnitude of charge and the distance separating the charges from each other.
The molecule having the lowest dipole moment among the options is the molecule that has the least polarity. The least polar molecule among the options is CH3CH2CH3, it has no polar bonds in its structure.
We have that for the Question "Identify the compound with the lowest dipole moment. Identify the compound with the lowest dipole moment. CH3CH2CH3 CH3OCH3 CH3CHO CH3OH CH3CN "
it can be said that
[tex]CH_3CH_2CH_3 have the lowest dipole moment[/tex]From the question we are given
CH3CH2CH3
CH3OCH3
CH3CHO
CH3OH
CH3CN
Generally alkanes have the lowest dipole moment, they have C-H bond which are non polar.
Therefore,
[tex]CH_3CH_2CH_3[/tex] have the lowest dipole moment
For more information on this visit
https://brainly.com/question/17756498
Why is iodine always Used in a solution containing excess I2
Answer:
If a standard iodine solution is used as a titrant for an oxidizable analyte, the technique is iodimetry. If an excess of iodide is used to reduce a chemical species while simultaneously forming iodine.
Iodine always used in a solution excess KI is given to aid in the solubilization of free iodine, which would be insoluble in clean water during normal circumstances.
What is Iodine?
Iodine is a kind of element which are mainly used in iodometry titration. It can be represented by I.
What is solution?A solution would be a homogenous mixture of two components, usually a solute as well as a solvent.
Iodimetry would be a technique that uses a standard iodine solution as a titrant for such an oxidizable analyte. When an excessive amount of iodide is used to decrease a chemical while somehow producing iodine.
To know more about iodine and solution
https://brainly.com/question/16867213
#SPJ2
A molecule of composition is replicated in a solution containing unlabeled (not radioactive) GTP, CTP, and TTP plus adenine nucleoside triphosphate with all its phosphorus atoms in the form of the radioactive isotope 32P. Will both daughter molecules be radioactive
Answer:
Please find the complete question in the attached file.
Explanation:
It would only be radioactive if the DNA molecule that employed the poly-T rand as templates. Its other molecule of the daughter would not have been radioactive as it did not need dATP for its replication. While each strand of the second molecule includes t, simultaneous reproduction dATP from both daughter molecules is needed so that each of those is radioactive.
Calculate the number of representative particles of 0.0391 mol Neon gas.
i need help ASAP !
Answer:
2.35 × 10²² particles
Explanation:
To get the number of particles in a substance, we multiply the number of moles (n) of that substance by Avogadro's number (nA).
That is, we say;
number of atoms = n × 6.02 × 10²³
In this question, Neon gas is said to have 0.0391 moles. The number of atoms in that field.
number of particles = 0.0391 × 6.02 × 10²³
number of particles = 0.235 × 10²³
number of particles = 2.35 × 10²² particles
An aqueous sucrose (C12H22O11) solution must be created for an experiment. If 100.00 mL of 0.200 M solution is needed, what amount of sucrose (in grams) must be weighed out
Answer:
6.85 g
Explanation:
Step 1: Given data
Molar concentration of the solution: 0.200 M (0.200 mol/L)Volume of the solution: 100.00 mL (0.10000 L)Step 2: Calculate the moles of sucrose (solute) required
Molarity is equal to the moles of solute divided by the liters of solution.
M = moles of solute / liters of solution
moles of solute = M × liters of solution
moles of solute = 0.200 mol/L × 0.10000 L = 0.0200 mol
Step 3: Calculate the mass corresponding to 0.0200 moles of sucrose
The molar mass of sucrose is 342.3 g/mol.
0.0200 mol × 342.3 g/mol = 6.85 g
The amount of sucrose (in grams) must be weighed out for the given reaction is 6.846g.
How we calculate mass from moles?Mass of any substance will be calculated by using the moles as:
n = W/M, where
W = required mass
M = molar mass
Given that, molarity of sucrose = 0.2 M
Volume of solution = 100mL = 0.1 L
Relation between moles and molarity is represented as:
M = n/V
On putting values on the above equation we get,
n = (0.2)(0.1) = 0.02 moles
We know that molar mass of sucrose (C₁₂H₂₂O₁₁) = 342.3 g/mole
Now we calculate the required mass by putting values on the first equation as:
W = (0.02)(342.3) = 6.846g
Hence, the required mass of sucrose is 6.846g.
To know more about moles, visit the below link:
https://brainly.com/question/24639749
Air bags are activated when a severe impact causes a steel ball to compress a spring and electrically ignite a detonator cap. This causes sodium azide (NaN3) to decompose explosively according to the following reaction. 2 NaN3(s) --> 2 Na(s) 3 N2(g) What mass in grams of NaN3(s) must be reacted in order to inflate an air bag to 79.5 L at STP
Answer:
154 g
Explanation:
Step 1: Write the balanced decomposition equation
2 NaN₃(s) ⇒ 2 Na(s) + 3 N₂(g)
Step 2: Calculate the moles corresponding to 79.5 L of N₂ at STP
At STP, 1 mole of N₂ occupies 22.4 L.
79.5 L × 1 mol/22.4 L = 3.55 mol
Step 3: Calculate the number of moles of NaN₃ needed to form 3.55 moles of N₂
The molar ratio of NaN₃ to N₂ is 2:3. The moles of NaN₃ needed are 2/3 × 3.55 mol = 2.37 mol.
Step 4: Calculate the mass corresponding to 2.37 moles of NaN₃
The molar mass of NaN₃ is 65.01 g/mol.
2.37 mol × 65.01 g/mol = 154 g
2KClO3 (s)⇄2KCl (s)+ 3O2 (aq) equilibrium constant
Answer: The equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]
Explanation:
The equilibrium constant is defined as the ratio of the concentration of the products to the concentration of reactants each raised to the power of their stoichiometric coefficients.
The concentration of all the solids and liquids are considered to be 1 in the expression of equilibrium constant
For the given chemical equation:
[tex]2KClO_3(s)\rightleftharpoons 2KCl(s)+3O_2(aq)[/tex]
The expression of equilibrium constant follows:
[tex]K_{eq}=[O_2]^3[/tex]
Hence, the equilibrium constant for the given chemical reaction is [tex][O_2]^3[/tex]
What is erosion?
A) Weathered materials staying in one place
B) The movement of weathered materials by wind, water or ice
C) New materials on a land form
Answer:
B. The movement of weathered materials by wind, water or ice.
is it a physical or chemical change when a candle is lit
You are an intermediate product of an industrial process which intends to separate iron from its ore. A well known iron ore is hematite. Which of these ores does not contain iron?
Goethite
Malachite
Siderite
Limonite
Answer:
Malachite
Explanation:
Malachite is a copper carbonate hydroxide mineral, with the equation Cu2CO3(OH)2. This dark, green-joined mineral solidifies in the monoclinic precious stone framework, and frequently shapes botryoidal, sinewy, or stalagmitic masses, in cracks and profound, underground spaces, where the water table and aqueous liquids give the way to synthetic precipitation. So, the answer is malachite. Best of Luck!
A diver exhales a bubble with volume of 250 mL at pressure of 2.4 atm and temperature of 15 C. How many gas particulate in this bubble?
Answer:
1.5x10²² particulates
Explanation:
Assuming ideal behaviour, we can solve this problem by using the PV=nRT formula, where:
P = 2.4 atmV = 250 mL ⇒ 250 / 1000 = 0.250 Ln = ?R = 0.082 atm·L·mol⁻¹·K⁻¹T = 15 °C ⇒ 15 + 273 = 288 KWe input the given data:
2.4 atm * 0.250 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 288 KAnd solve for n:
n = 0.025 molFinally we calculate how many particulates are there in 0.025 moles, using Avogadro's number:
0.025 mol * 6.023x10²³ particulates/mol = 1.5x10²² particulatesA 15.0 mL urine from a dehydrated patient has a density of 1.019g/mL. What is the mass of the sample, reported in mg?
Answer:
Mass of sample in mg = 15,285 mg
Explanation:
Given:
Volume of urine sample = 15 ml
Density of sample = 1.019 g/ml
FInd:
Mass of sample in mg
Computation:
Mass = density x volume
Mass of sample in mg = Volume of urine sample x Density of sample
Mass of sample in mg = 1.019 x 15
Mass of sample in mg = 15.285 gram
Mass of sample in mg = 15.285 x 1,000
Mass of sample in mg = 15,285 mg
Calculate the mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the following balanced chemical equation: 2 Al + 6 HCl → 2 AlCl3 + 3 H2
Answer: The mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.
Explanation:
The given balanced reaction equation is as follows.
[tex]2Al + 6HCl \rightarrow 2AlCl_{3} + 3H_{2}[/tex]
Here, the mole ration of Al and hydrogen produced is 2 : 3
As mass of aluminum is given as 26.98 g. So, moles of aluminum (molar mass = 26.98 g/mol) is as follows.
[tex]Moles = \frac{mass}{molar mass}\\= \frac{26.98 g}{26.98 g/mol}\\= 1 mol[/tex]
So, when 1 mole of Al reacted then 1.5 moles of hydrogen is produced as per the given mole ratio.
Therefore, mass of hydrogen formed is calculated as follows.
[tex]mass = moles \times molar mass\\= 1.5 mol \times 2.02 g/mol\\= 3.03 g[/tex]
Thus, we can conclude that the mass of hydrogen formed when 26.98 g of aluminum reacts with excess hydrochloric acid according to the given balanced equation is 3.03 g.
A transition metal in the fourth period from the following list : Cu, O , Pr, Ag
Answer:
Cu
Explanation:
Groups 3 - 12 (or groups IIA - IIB) of the periodic table contain transition elements. Transaction elements start from period four (4) of the periodic table. The phrase alludes to the fact that the d sublevel is filling at a lower main energy level than the s sublevel that came before it.
The transition elements' arrangement is inverted from the fill order, with the 4 s filled prior to the actual 3 d begins. The transition elements are commonly referred to as transition metals since they are all metals. They are less reactive than the metals in Groups 1 and 2 and have normal metallic characteristics.
From the options given Cu is the only transition metal in the fourth period on the periodic table.
1. Complete the following chart for the following atoms:
Element
Mass
number
Number of
electrons
Number of
neutrons
Atomic
Number
(number of
protons)
Potassium
16
56
26
What is the atomic symbol (the nuclide) for the isotope with 15 protons and 16
neutrons? Your answer must be in the form shown:
AX
You must show the correct numbers for A and Z
and have the correct symbol (Z). (3 points)
Explanation:
If there are 15 protons, 15 nuclear particles of unit positive charge, then
Z
=
15
. Now
Z
≡
the atomic number
, and you look at your copy of the Periodic Table, and you find that for
Z
=
15
, the element phosphorus is specified.
But we are not finished. Along with the 15 defining protons, there are also 16 neutrally charged, massive nuclear particles, 16 neutrons, and the protons and neutrons together determine the atomic mass. The isotope is thus
31
P
, which is almost 100% abundant, and an important nucleus for
NMR spectroscopy.
What must happen for ice to melt at a given pressure?
A. The average kinetic energy of the water molecules must decrease.
B. Thermal energy must be transferred to the ice from its
surroundings.
C. The orderliness of the water molecules must decrease.
D. Thermal energy must be transferred from the ice to its
surroundings.
Answer:
D
Explanation:
thermal energy must be transferred from the ice to it's surroundings
Thermal energy is the heat and energy present in the system. The thermal energy must be dissipated from ice to the surroundings to melt and produce liquid. Thus, option D is correct.
What is thermal energy?Thermal energy is present in any substance in the form of energy and heat that depends on kinetic energy, orderliness, randomness, temperature, etc. It is passed from a substance to the surrounding at a lesser temperature.
The ice can melt into a liquid when it loses its thermal energy and heat to the surrounding with increased kinetic energy and releases the temperature to the area with a temperature less than the ice.
Therefore, the heat from ice will get dissipated to the outer environment to melt.
Learn more about thermal energy here:
https://brainly.com/question/11278589
#SPJ5
As a result of the particles in a gas being in constant motion, gas has a _______.
variable volume
variable Pressure
variable Shape
variable mass
Answer:
i think it's variable pressure
if not soo advance sorry :)
identify the organ system pictured below and state two functions of this system in the body
Answer:
skeletal system
Explanation:
to create and fliter blood and provide frame-work to the human body and support
Molecule contains carbon, hydrogen and sulfur atoms. When a sample of 0.535g of this compound is burnt in oxygen, 1.119 g of CO2and 0.229 gof H2O and 0.407g of SO2are obtained.
Calculate its empirical formula.
Answer:
The empirical formula is, C4H4S
Explanation:
Number of moles of carbon = 1.119 g/ 44g/mol = 0.025 moles
Mass of Carbon= 0.025 moles × 12 g/ mole = 0.3 g
Number of moles of hydrogen = 0.229/18g/mol × 2 = 0.025 moles
Mass of hydrogen = 0.025 moles × 1 = 0.025 g
Number of moles of sulphur = 0.407g/ 64 g/mol = 0.0064 moles
Mass of sulphur= 0.0064 moles ×32 = 0.2 g
Now we obtain the mole ratios by dividing through by the lowest ratio.
C- 0.025 moles/ 0.0064 moles, H- 0.025 moles/ 0.0064 moles, S- 0.0064 moles/0.0064 moles
C4H4S
How many grams of Al2O3 is extracted from 250. g of FeO?
Answer:
[tex]m_{Al_2O_3}=118.27gAl_2O_3[/tex]
Explanation:
Hello there!
In this case, if we consider the following chemical reaction, whereby Al2O3 is produced from Al and FeO:
[tex]3FeO+2Al\rightarrow 3Fe+Al_2O_3[/tex]
Thus, since there is 3:1 mole ratio of FeO to Al2O3, it turns out feasible for us to use their molar masses, 71.844 g/mol and 101.96 g/mol respectively, to obtain the grams of the latter as follows:
[tex]m_{Al_2O_3}=250.gFeO*\frac{1molFeO}{71.844gFeO}*\frac{1molAl_2O_3}{3molFeO} *\frac{101.96gAl_2O_3}{1molAl_2O_3}\\\\m_{Al_2O_3}=118.27gAl_2O_3[/tex]
Regards!
help me plsssssssss.... im timed
Answer:
a
Explanation:
a
Answer:
B. Isotopes of the element.
Explanation:
Isotopes are basically atoms of the same element that contain the same number of protons, but a different number of neutrons.
What volume in mL of 0.220 M HBr solution is required to produce 0.0130 moles of HBr?
Answer: A volume of 59 mL of 0.220 M HBr solution is required to produce 0.0130 moles of HBr.
Explanation:
Given: Moles = 0.0130 mol
Molarity = 0.220 M
Molarity is the number of moles of solute present in liter of a solution.
[tex]Molarity = \frac{moles}{volume (in L)}[/tex]
Substitute the values into above formula as follows.
[tex]Molarity = \frac{moles}{volume (in L)}\\0.220 M = \frac{0.0130 mol}{Volume (in L)}\\Volume (in L) = 0.059 L[/tex]
As 1 L = 1000 mL
So, 0.059 L = 59 mL
Thus, we can conclude that a volume of 59 mL of 0.220 M HBr solution is required to produce 0.0130 moles of HBr.
Which commercial technology commonly uses plasmas?
a radio
a race car
a television
a microwave oven
Answer:
A television is commercial technology commonly uses plasmas.