The enthalpy change for a chemical reaction is: a. the temperature change b. the amount of heat given off or absorbed c. related to molar volume d. none of the above

Answer:

Explanation:

[tex]H_3O^+[/tex] also known as hydronium ion is formed as a result of the reaction between an hydrogen proton and a water molecules.

i.e [tex]\mathtt{H^+ + H_2O \to H_3O^+}[/tex]

(molecular geometry for the hydronium ion shows that the lewis structure of hydronium ion possess a three hydrogen ion bonded to a central atom known as oxygen. The oxygen possess a lone pair with a positive ion. So we have three hydrogen atoms and a lone pair attached to the oxygen. We can now say that there are four groups as the steric number in which one of them is a lone pair. This give rise to the trigonal pyramidal shape of the [tex]H_3O^+[/tex] (hydronium ion) with a bond angle of about 109,5°

Similarly, [tex]NH_3[/tex] on the other hand also known as ammonia has a shape that can be also determined by the Lewis structure.

IN ammonia,  there are three hydrogen  and a lone pairs of electron spreading out as far away from each other  from the centre nitrogen. In essence, the valence shell electron pair around hydrogens tend to repel each other. Hence, giving it a trigonal pyramidal shape.

From above the similarities between H3O and NH3 is in their molecular geometry in which both  H3O and NH3 have the same shape.

These molecules are called isoelectronic. Why?

Isoelectronic molecules are molecules having the same number of electrons and same electronic configuration  structure. As a result H3O and NH3 possess the same  number of electrons in the same orbitals and they also posses the same structure.

Answer:

The liquid that is often used in thermometers is chrome.

It is khwon for raising its volule when the temperature raises and vice-versa. ● the temperature and the volume are proprtional to each other so using Mathematics, scientists have figured out a way to benefit from it to make a thermometer.

Answer:

36.7 mg

Explanation:

The following data were obtained from the question.

Original amount (A₀) = 65.1 mg

Rate constant (K) = 2.47×10¯² years¯¹

Time (t) = 23.2 years

Amount of substance remaining (A) =?

Thus, we can obtain the amount of substance remaining after 23.2 years as follow

ln A = lnA₀ – Kt

lnA = ln(65.1) – (2.47×10¯² × 23.2)

lnA = 4.1759 – 0.57304

lnA = 3.60286

Take the inverse of ln

A = e^3.60286

A = 36.7 mg

Therefore, the amount remaining after 23.2 years is 36.7 mg.

Answer:

  30. 5 planes are shown

  31. 1 plane

  32. CEF

  33. on line AB

  34. E or F

   35. ABCD or BCEF or CDEF or ACEF

Explanation:

30. Each of the surfaces of the rectangular pyramid is a plane. There are 5 planes.

__

31. 3 points define one plane only.

__

32. The only points shown on the same line segment are points E, F, and C.

__

33. If G is to be collinear with A and B, it must lie on line AB.

__

34. The only points shown that are not on plane N are points E and F. Either of those will do.

__

35. There are three planes that have 4 points shown on them. The four points that are on the same plane are any of ...

Plane ACEF is not shown on the diagram, but we know that those 4 points are also coplanar. (Any point not on line CE, together with the three points on that line, will define a plane with 4 coplanar points.)

Answer:

B. 21.07 x 10²³ molecules

Explanation:

Avogadro's Number: 6.022 x 10²³

Step 1: Set up equation

[tex]3.5 mols CO_2(\frac{6.022(10^{23}) moleculesCO_2}{1 mol CO_2})[/tex]

Step 2: Multiply and cancel out units

3.5(6.022 x 10²³) = 21.07 x 10²³ molecules CO₂

Step 3: Convert to proper scientific notation

≈ 2.11 x 10²³ molecules CO₂

Answer:

X₅Y₂Z₃

Explanation:

The formula of a compound is determined as the whole number ratio between moles of each element present in the molecule.

The molecule is made from X, Y and Z. To fin the ratio we will divide the given moles in the moles of Y (0.197 moles), because is the element with the low number of moles.

X = 0.492 moles / 0.197 moles = 2.5

Y = 0.197 moles / 0.197 moles = 1

Z = 0.295 moles / 0.197 moles = 1.5

But, as the formula is given just with whole numbers, if we multiply each number twice:

X = 2.5*2 = 5

Y = 1*2 = 2

Z = 1.5*2 = 3

The formula is:

Answer:

n = 0.207 mole

Explanation:

We have,

P = 1 atm

V = 5 liter

R = 0.0821 L.atm/mol.K

T = 293 K

We need to find the value of n. The relation is as follows :

PV = nRT

Solving for n,

[tex]n=\dfrac{PV}{RT}\\\\n=\dfrac{1\times 5}{0.0821 \times 293}\\\\n=0.207\ \text{mol}[/tex]

So, the value of n is 0.207 mol.

Answer:

Jesseca Kusher, an 18-year-old researcher from Spartansburg, S.C., invented a paint-on coating for roofing shingles. Her formula could reduce a home's cooling costs and possibly cut ozone pollution in urban areas...

SUPPORT ME ...........

Answer:

Jesseca created mixtures containing graphite, gypsum, and mica that could be painted on roof shingles.

Explanation:

Hope this helped!!

Answer:

Each energy sublevel contains a different number of electrons. For example, sublevel D can contain up to 10 electrons

Explanation:

The atoms are surrounded by propellers that within each propeller there is a certain number of electrons, these electrons jump from orbit to orbit according to the amount of energy they have. The four levels that make up the electronic cloud that surrounds an atom are: s p d f.

When these electrons change orbit or level they release energy in the form of light, which is known as a photon.

Explanation:

To obtain the empirical and molecular formula of this compound from the percent composition of the elements, we follow the steps below;

Step 1: Divide the percentage composition by the atomic mass

Sulphur = 31.42 / 32 = 0.9819

Oxygen = 31.35 / 16 = 1.9594

Flourine = 37.23 / 19 = 1.9595

Step 2: Divide by the lowest number

Sulphur = 0.9819 / 0.9819 = 1

Oxygen = 1.9594 / 0.9819 ≈ 2

Flourine = 1.9595 / 0.9819 ≈ 2

This means the ratio of the elements is 1 : 2: 2

The empirical formular (simplest formular of a compound) of the compound is;

SO₂F₂

To obtain the molecular formular (Actual formular of a compound);

(SO₂F₂)n = 102.1

Inserting the atomic masses and solving for n;

(102)n = 102.1

n ≈ 1

The molecular formular is; (SO₂F₂)₁ = SO₂F₂

Answer:

a. Cyclohexanone

Explanation:

The principle of IR technique is based on the vibration of the bonds by using the energy that is in this region of the electromagnetic spectrum. For each bond, there is a specific energy that generates a specific vibration. In this case, you want to study the vibration that is given in the carbonyl group C=O. Which is located around 1700 cm-1.

Now, we must remember that the lower the wavenumber we will have less energy. So, what we should look for in these molecules, is a carbonyl group in which less energy is needed to vibrate since we look for the molecule with a smaller wavenumber.

If we look at the structure of all the molecules we will find that in the last three we have heteroatoms (atoms different to carbon I hydrogen) on the right side of the carbonyl group. These atoms allow the production of resonance structures which makes the molecule more stable. If the molecule is more stable we will need more energy to make it vibrate and therefore greater wavenumbers.

The molecule that fulfills this condition is the cyclohexanone.

See figure 1

I hope it helps!

CHECK COMPLETE QUESTION BELOW

At a given temperature the vapor pressures of benzene and toluene are 183 mm Hg and 59.2 mm Hg, respectively. Calculate the total vapor pressure over a solution of benzene and toluene with Xbenzene = 0.580.

Answer:

The total vapor pressure is [tex]81.3 mmHg[/tex]

Explanation:

We will be making use of Dalton and Raoults equation in order to calculate the total pressure,

Which is [tex]PT= (PA × XA) +(PB ×XB)[/tex]

PT= total vapor pressure

From the question

Benene's Mole fraction = 0.580

then to get Mole fraction of toluene we will substract the one of benzene from 1. because total mole fraction is always 1.

= (1 - 0.580) = 0.420

Vapor pressure of benzene given = 183 mmHg

Vapor pressure of toluene given= 59.2 mmHg

If we substitute those value into above equation, we have

PT=(183×0.580)+(59.2×0.420)

=81.3mmHg

Therefore,, the total vapor pressure of the solution is 81.3 mmHg

Answer:

Here are four possible voltaic cells.  

Explanation:

1. Standard reduction potentials

                                         E°/V

I₂(s) + 2e⁻ ⟶ 2I⁻(aq);        0.54

Cu²⁺(aq) + 2e⁻ ⟶ Cu(s);   0.34

Fe²⁺(aq) + 2e⁻ ⟶ Fe(s);   -0.41

Zn²⁺(aq) + 2e⁻ ⟶ Zn(s);   -0.76

2. Possible Voltaic cells

(a) Zn/I₂

                                                                       E°/V

Anode:     Zn(s) ⟶ Zn²⁺(aq) + 2e⁻;                 0.76

Cathode:  I₂(s) + 2e⁻ ⟶ 2I⁻(aq);                     0.54

Cell:         Zn(s) +  I₂(s) ⟶  Zn²⁺(aq) + 2I⁻(aq); 1.30

Zn(s)|Zn²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)

Zn is the anode; graphite is the cathode.

(b) Zn/Cu²⁺

                                                                          E°/V

Anode:     Zn(s) ⟶ Zn²⁺(aq) + 2e⁻;                    0.76

Cathode:  Cu²⁺(aq) + 2e⁻ ⟶ Cu(s);                  0.34

Cell:          Zn(s) +  Cu²⁺(s) ⟶  Zn²⁺(aq) + Cu(s); 1.10

Zn(s)|Zn²⁺(aq)∥Cu²⁺(aq)|Cu(s)

Zn is the anode; Cu is the cathode.

(c) Zn/Fe²⁺

                                                                            E°/V

Anode:     Zn(s) ⟶ Zn²⁺(aq) + 2e⁻;                     0.76

Cathode:  Fe²⁺(aq) + 2e⁻ ⟶ Fe(s);                    -0.41

Cell:          Zn(s) +  Fe²⁺(s) ⟶  Zn²⁺(aq) + Fe(s);  0.35

Zn(s)|Zn²⁺(aq)∥Fe²⁺(aq)|Fe(s)

Zn is the anode; Fe is the cathode.

(d) Fe/I₂

                                                                         E°/V

Anode:     Fe(s) ⟶ Fe²⁺(aq) + 2e⁻;                   0.41

Cathode: I₂(s) + 2e⁻ ⟶ 2I⁻(aq);                     0.54

Cell:         Zn(s) +  I₂(s) ⟶  Zn²⁺(aq) + 2I⁻(aq); 0.95

Fe(s)|Fe²⁺(aq)∥I⁻(aq)|I₂(s)|C(s, graphite)

Fe is the anode; graphite is the cathode.

Answer:

K2CO3  and NaF

Explanation:

In order to ascertain which salt would form a basic solution we have to identify the classification of each of the salts.

- NH4Br: is the salt of a weak base (NH3) and a strong acid (HBr). This means that it would form an acidic solution.

- Pb(NO3): This is a normal salt, hence would not form a basic solution.

-  K2CO3: This is salt that forms a strongly alkaline/basic solution.

- NaF: it is the salt of a strong base, NaOH, and a weak acid, HF. This means this would form a basic solution.

The compounds capable to form basic solutions are[tex]\rm \bold {K_2CO_3 }[/tex] and NaF. Thus, options C and D are correct.

The basic solution has been given with the presence of a high number of hydroxide ions, while the acidic solution has been the presence of hydrogen ions.

The solution has been considered as basic when the compound has been constituted of a strong base. The constituents of the following compounds have been:

The compounds capable to form basic solutions are[tex]\rm \bold {K_2CO_3 }[/tex] and NaF. Thus, options C and D are correct.

For more information about the basic solution, refer to the link:

https://brainly.com/question/3595168

Answer:

5.90

Explanation:

Initial moles of CH3COO- = 10.0/1000 x 0.75 = 0.0075 mol

Moles of HCl added = 5.0/1000 x 0.10 = 0.0005 mol

CH3COO- + HCl => CH3COOH + Cl-

Moles of CH3COO- left = 0.0075 - 0.0005 = 0.007 mol

Moles of CH3COOH formed = moles of HCl added = 0.0005 mol

pH = pKa + log([CH3COO-]/[CH3COOH])

= -log Ka + log(moles of CH3COO-/moles of CH3COOH)

= -log(1.78 x 10^(-5)) + log(0.007/0.0005)

= 5.90

Answer:

The correct answer is 5.895.

Explanation:

The reaction will be,

CHCOO⁻ + H+ ⇔ CH₃COOH

Both the HCl and the acetate are having one n factor.

The millimoles of CH₃COO⁻ is,

= Volume in ml × molarity = 10 × 0.75 = 7.5

The millimoles of HCl = Volume in ml × molarity = 5 × 0.1 = 0.5

Therefore, 0.5 will be the millimoles of CH₃COOH formed, now the millimoles of the CH₃COO⁻ left will be, 7.5-0.5 = 7.0

The volume of the solution is, 10+5 = 15 ml

The molarity of CH₃COO⁻ is, millimoles / volume in ml = 7/15

The molarity of CH₃COOH is 0.5/15

pH = pKa + log[CH₃COO⁻]/[CH₃COOH]

= 4.74957 + 1.146

= 5.895

Answer:

[tex]r_A=-1\frac{M}{s}[/tex]

Explanation:

Hello,

In this case, given the rate of production of C, we can compute the rate of consumption of A by using the rate relationships which include the stoichiometric coefficients at the denominators (-1 for A and 2 for C) as follows:

[tex]\frac{1}{-1} r_A=\frac{1}{2}r_C[/tex]

In such a way, solving the rate of consumption of A, we obtain:

[tex]r_A=-\frac{1}{2} r_C=-\frac{1}{2}*2\frac{M}{s}\\ \\r_A=-1\frac{M}{s}[/tex]

Clearly, such rate is negative which account for consumption process.

Regards.

Answer:

W = 278.64375 Joules

Explanation:

The information given in this problem are;

Initial volume = 0L

Final volume = 2.50L

ΔV = 2.50 - 0 = 2.50 L

External pressure, P =  1.10 atm

Work = ?

These parameters are related by the equation;

w = - P ΔV

W = - (1.10 )(2.50)

W = 2.75 L atm

Upon conversion to joules;

1 liter atmosphere is equal to 101.325 joule

W = 278.64375 Joules

Answer:

D) 65.7%

Explanation:

Based on the reaction:

2H2(g)+O2(g)⟶2H2O(l)

2 moles of hydrogen produce 2 moles of water assuming an excess of oxygen.

To find percent yield of the reaction we need to find theoretical yield (The yield assuming all hydrogen reacts producing water). With theoretical yield and actual yield (32.8g H₂O) we can determine percent yield as 100 times the ratio between actual yield and theoretical yield.

Theoretical yield:

Moles of 5.58g H₂:

5.58g H₂ ₓ (1 mol / 2.016g) = 2.768 moles H₂

As 2 moles of H₂ produce 2 moles of H₂O, if all hydrogen reacts will produce 2.768 moles H₂O. In grams:

2.768 moles H₂O ₓ (18.015g / mol) =

49.86g H₂O is theoretical yield

Percent yield:

Percent yield = Actual yield / Theoretical yield ₓ 100

32.8g H₂O / 49.86g ₓ 100 =

65.7% is percent yield of the reaction

Answer:

[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]

Explanation:

Let recall the crystal structure of CsBr obtains a BCC structure. In a BCC structure, there exist only two atom per cell.

The density d of CsBr in g/cm³ can be calculated by using the formula:

[tex]\mathtt{ density \ d = \dfrac{z \times molar\ mass \ (M)}{ edge \ length \ (a) \ \times avogadro's \ number \ (N)}}[/tex]

where;

z = 1 mole of CsBr

edge length = 428.7 pm = (4.287 × 10⁻⁸)³ cm

molar mass of CsBr = 212.81 g/mol

avogadro's number = 6.023 × 10²³

[tex]\mathtt{ density \ d = \dfrac{1 \times 212.81}{(4.287 \times 10^{-8})^3 \times 6.023 \times 10^{23}}}[/tex]

[tex]\mathtt{ density \ d = \dfrac{ 212.81}{47.4540533}}[/tex]

[tex]\mathbf {density \ d =4.4845 \ g/cm^3}[/tex]

Answer:

А It is hard because its ions are held together by strong electrostatic attractions.

B It is malleable because its atoms can easily move past one another without disrupting the bonding.  

Explanation:

These are correct explanations of the properties of magnesium.

C is wrong. Mg is a good conductor of electricity and it has metallic bonds.

D is wrong. Mg has no molecules. It has no intermolecular forces.

Answer:

The answer is D) Electrolytic cell

Explanation:

An electrolytic cell is a device used for the decomposition by the electrical current of ionized substances called electrolytes.

When the two electrodes are connected by a wire, electrical energy is produced, and a flow of electrons takes place from the electrode.

These cells are the closest thing to a galvanic battery.

Answer:

b. voltaic cell

Explanation:

Founders Education answer. had to take this quiz 4 times

Answer:

True

Explanation:

In pi bonds, the electron density concentrates itself between the atoms of the compound but are present on either side of the line joining the atoms. Electron density is found above and below the plane of the line joining the internuclear axis of the two atoms involved in the bond.

Pi bonds usually occur by sideways overlap of atomic orbitals and this leads to both double and triple bonds.

Explanation:

An atom undergoes alpha decay by losing a helium atom.

So when bismuth undergoes alpha decay, we have;

²¹⁰₈₃Bi --> ⁴₂He + X

Mass number;

210 = 4 + x

x = 206

Atomic number;

83 = 2 + x

x = 81

The element is Thallium. The symbol is Ti.

For the second part;

X --> ⁴₂He + ²³⁴₉₀Th

Mass number;

x = 4 + 234 = 238

Atomic Number;

x = 2 + 90 = 92

The balanced nuclear equation is;

²³⁸₉₂U --> ⁴₂He + ²³⁴₉₀Th

Answer:

d. 8 moles of H2O on the product side

Explanation:

Hello,

In this case, we need to balance the given redox reaction in acidic media as shown below:

[tex]MnO_4^{1-} (aq) + Cl^{1-} (aq) \rightarrow Mn^{2+} (aq) + Cl_2 (g)\\\\(Mn^{7+}O^{2-}_4)^{1-} (aq) + Cl^{1-} (aq) \rightarrow Mn^{2+} (aq) + Cl_2 (g)\\\\\\\\(Mn^{7+}O^{2-}_4)^{1-} (aq)+8H^++5e^- \rightarrow Mn^{2+}+4H_2O\\\\2Cl^{1-}\rightarrow Cl_2^0+2e^-\\\\2*[(Mn^{7+}O^{2-}_4)^{1-} (aq)+8H^++5e^- \rightarrow Mn^{2+}+4H_2O]\\\\5*[2Cl^{1-}\rightarrow Cl_2^0+2e^-]\\\\\\\\2(Mn^{7+}O^{2-}_4)^{1-} (aq)+16H^++10e^- \rightarrow 2Mn^{2+}+8H_2O\\\\10Cl^{1-}\rightarrow 5Cl_2^0+10e^-\\[/tex]

Then, we add the half reactions:

[tex]2(Mn^{7+}O^{2-}_4)^{1-} (aq)+16H^++10Cl^{1-} \rightarrow 2Mn^{2+}+8H_2O+5Cl_2^0[/tex]

Thereby, we can see d. 8 moles of H2O on the product side.

Best regards.

Answer:

THE FINAL TEMPERATURE OF WATER IS -4.117 °C

Explanation:

Mass of the aluminium = 50 g

c = 0.88 J/g C

Initial temperature of aluminium = 225 °C

Volume of water = 100 ml

Density of water = 1 g/ml

Mass of water = density * volume of water

Mass of water = 1 * 100 = 100 g of water

Initial temperature of water = 20 C

It is worthy to note that the heat of a system is constant and conserved as no heat is lost or gained by a closed system,

So therefore,

heat lost by aluminium = heat gained by water

H = mass * specific heat capacity * temeprature change

So:

m c ( T2- T1) = m c (T2-T1)

50 * 0.88 * ( T2 - 225) = 100 * 4.18 *( T2 - 20)

44 ( T2 - 225 ) = 418 ( T2 - 20)

44 T2 - 9900 = 418 T2 - 8360

-9900 + 8360 = 418 T2 - 44 T2

-1540 = 374 T2

T2 = - 4.117

So therefore the final temperature of water is -4.117 °C

Answer:

0.14%

Explanation:

The computation of % is shown below:

As we know that

     HClO <=> H+ + ClO-

I         0.015          0      0

C          -a            +a     +a

E      0.015-a        a       a

Now

[tex]Ka = \frac{[H+][ClO-]}{[HClO]}[/tex]

[tex]= \frac{a^{2}}{(0.015 - a)} \\\\= 3.0 \times 10^{-8}[/tex]

[tex]a^{2} + 3.0 \times 10^{-8}a - 4.5 \times 10^{-10} = 0[/tex]

Now Solves the quadratic equation i.e.

[tex]a = 2.120 \times 10^{-5}[/tex]

[tex][H+] = a = 2.120 \times 10^{-5} M[/tex]

So,

% ionization is

[tex]= \frac{[H+]}{[HClO]}_{initial} \times 100\%\\\\= 2.120 \times 10^{-5}\div0.015 \times 100\%[/tex]

= 0.14%

Hence, the percentage of hypochlorous ionization is 0.14%

Answer:

B. 1-amino-2-methylpentan-2-ol

Explanation:

In this case, the first step, we have the attack of the nucleophile cyanide ([tex] CN^-[/tex] produced by sodium cyanide to the carbon on the carbonyl group (C=O) producing a negative charge in the oxygen.

Then HCl protonates the molecule to produce a cyanohydrin. This cyanohydrin can be reduced by the action of hydrogen gas ([tex]H_2[/tex]) in the presence of a catalyst ([tex]Pd[/tex]), producing an amino group. With this in mind, the final molecule is: 1-amino-2-methylpentan-2-ol.

See figure 1 to further explanations

I hope it helps!

Answer:

Lime water, [tex]Ca(OH)_{2}_({aq} )[/tex] is formed.

Explanation:

Lime-water is a clear and colourless dilute solution of aqueous calcium hydroxide salt.

Small amounts of calcium hydroxide salt,  [tex]Ca(OH)_{2}_(s)[/tex]  is sparsely soluble at room temperature when dispersed vigorously. if in excess, a white suspension called 'milk of lime'is formed.

I hope this explanation is helpful.

Answer:

a. In the nickel-aluminum galvanic cell, the cathode is nickel electrode.

b. Therefore electrons flow from the aluminium electrode to the nickel electrode.

c. The aluminium electrode loses mass, while the nickel electrode electrode gains mass.

Explanation:

Voltaic or galvanic cells are electrochemical cells in which spontaneous oxidation-reduction reactions. The two halves of the redox reaction are separate and electron transfer is required to occur through an external circuit for the redox reaction to take place. That is, one of the metals in one of the half cells is oxidized while the metal of the other half cell is reduced, producing an exchange of electrons through an external circuit. This makes it possible to take advantage of the electric current.

Given:

E ⁰N i ⁺² = − 0.23 V   is the standard reduction potential for the nickel ion

E ⁰  A l ⁺³ =  − 1.66  V  is the standard reduction potential for the aluminum ion

The most negative potentials  correspond to more reducing substances. In this case, the aluminum ion is the reducing agent, where oxidation takes place. In the anodic half cell oxidations occur, while in the cathode half cell reductions occur. So the aluminum cell acts as the anode while the nickel cell acts as the cathode.

So a. In the nickel-aluminum galvanic cell, the cathode is nickel electrode.

The metal that is oxidized gives electrons to the metal that is reduced through the outer conductor. Then the electrons flow spontaneously from the anode to the cathode.

Then b. Therefore electrons flow from the aluminium electrode to the nickel electrode.

Ni⁺², being the cathode, accepts electrons, becoming Ni (s) and depositing on the Ni electrodes.

So, c. The aluminium electrode loses mass, while the nickel electrode electrode gains mass.