Answer:
True.
This is because, from the information provided so far, it could be concluded that, the policy makers don't have any single idea of what they are doing regarding to the economy.
This could be seen in the series of poor performance of the economic indicators as shown which has lead to poor economic growth in our country.
Explanation:
A current of 17 A flows through a resistor of 10 2. What is the voltage
across the resistor
say I have two rocks of different sizes but are taken from the same rock. Will their density be equalvilent
yes their density are equal
Neha and Reha are playing see-saw.Neha is sitting 60cm away from the fulcrum and Reha is sitting 40cm away from the fulcrum.Calculate the effort that Reha should apply to lift Neha.The weight of Neha is 360N.
Answer:
Effort = 540 Newton
Explanation:
Given the following data;
Load arm = 60 cm
Effort arm = 40 cm
Load = 360 N
Conversion:
100 cm = 1 meters
40 cm = 40/100 = 0.4 meters
60 cm = 60/100 = 0.6 meters
To calculate the effort that Reha should apply to lift Neha, we would use the expression;
Effort * effort arm = load * load arm
Substituting into the expression, we have;
Effort * 0.4 = 360 * 0.6
Effort * 0.4 = 216
Effort = 216/0.4
Effort = 540 Newton
A exerted by an object on another is a force
hope this helps
Answer:
If a person is pushing a desk across the room, then there is an applied force acting upon the object. The applied force is the force exerted on the desk by the person.
Two friends are working out together using weights:
-James lifts 20kg weights up at a velocity of 1.9m/s
-Kayla lifts 15kg weights up at a velocity of 2.6m/s
0
Which friend is creating more momentum?
Answer:
Kayla. You can calculate it using the formula for momentum: momentum=mass×velocity and find the bigger number between the two momentums
6) A car of mass 1000kg moving with a velocity of 40m/s collides with a tree and comes to stop in 5s. What will be the force exerted by the car on the tree?
Answer:
Refer to the attachment!~
A woman pushes a car with a force of 400 N for a distance of 15m. How much work has she done?
Answer:
the work done by the woman is 6,000 J
Explanation:
Given;
force applied by the woman, F = 400 N
distance moved by the woman, d = 15 m
The work done by the woman is calculated as follows;
W = F x d
W = 400 N x 15 m
W = 6000 Nm = 6,000 J
Therefore, the work done by the woman is 6,000 J
A 59 kg block is positioned 2.0 meters away from another 59 kg block. What is the gravitational force exerted on each object?
A)
5.8 × 10-8 N
B)
2.0 × 10-9 N
C)
9.8 × 10-10 N
D)
1.2 × 10-7 N
Answer:
Explanation:
The gravitational force equation is
[tex]F_g=\frac{Gm_1m_2}{r^2}[/tex] where G is the gravitational constant. Filling in with what we are given and what we know to be true:
[tex]F_g=\frac{6.67*10^{-11}(59)(59)}{(2.0)^2}[/tex] which, when you do the math, comes out to be
[tex]F_g=5.8*10^{-8}N[/tex], choice A.
digestion that takes place in the mouth.
The switch is released and the door locks. Explain in detail how this happens.
Answer:
The iron bolt is attracted to the electromagnet. The force of attraction between the electromagnet's core and the iron bolt is greater than the force of the spring, so the iron bolt is pulled out of its housing in the door
Explanation:
Please answer !!!A company wants to install a sensor to monitor the light level in the offices of their buildings. The sensor contains an LDR which has a resistance of 10kohlms in daylight and 100kohlms in the dark . The choice of resistor in the circuit is between one of 25kohlms and 1 megaohlm. The input p.d to the sensing circuit of 12 v . State and explain which resistor is the best choice for the circuit in light and dark which each of the resistors . You could put your calculations in a table .
Answer:
Explanation:
The sensor contains an LDR which has a resistance of 10kohlms in daylight and 100kohlms in the dark.
If the resistor in the circuit is 1 megaohlm, the total resistance in daylight and darkness will be 1.01 megaohms and 1.1 megaohlms.
The percentage difference = (1.1-1.01)/1.1*100% = 8.18%
If the resistor in the circuit is 25 kohlm, the total resistance in daylight and darkness will be 35 kohms and 125 kohlms.
The percentage difference = (125-35)/125*100% = 72%
With the input p.d to the sensing circuit fixed at 12 v, the sensing current will change according to the total resistance. A 72% difference is much more detectable. So the 25 kohm resistor is the better choice.
Answer:
Explanation:
V=IR
I=12/(R of resistor + R of LDR)
R of LDR = 10kohm in light and = 100kohm in dark
R1 = 25kohm
R2 = 1Mohm
solve 4 current
light dark
R1 12/(25+10)=0.343mA 12/(25+100)=0.096mA
R2 12/(1000+10)=0.012mA 12/(1000+100)=0.011mA
so R1 is better as its easier 2 tell its light or dark
Please help! This is due in 10 minutes!! I will mark brainliest asap
when a metal ball is heated through 30°c,it volume becomes 1.0018cm^3 if the linear expansivity of the material of the ball is 2.0×10^-5k^-1, calculate its original volume
When is the kinetic energy of the ball zero and when is it at its highest? When is its potential energy at its lowest and at its highest? What happens to the kinetic energy and potential energy between point A and point B? (3 points)
Answer:
if there is only one planet in the universe and the ball is there it will have 0 kinetic energy if the ball is in the very center of that planet only if the planet itself is absolutely motionless. its at its highest if the planet is moving away from the ball at a slightly faster speed forever. Between point A and B both potential energy and kinetic energy are at perfect 0.
Explanation:
never will have a measurable kinetic or potential energy status unless every single object is included in the calculation.
The symbol for the hydroxide ion is
Он*
Оно
ОН(ОН)
ООН
NEXT QUESTION
ASK FOR HELP
Mr. Tolman believes that our universe is expanding, but with all of the gravitational force from the celestial bodies of space, the universe will begin to contract. He believes in the _____.
A) oscillating universe theory
B) inflation theory
C) steady state theory
D) big bang theory
lol nerd go eat some grass
Answer:
ur mom hahahahahhahaahahahahahaha
Explanation:
loserrrrrrrrrrr
As you slide a heavy box across the floor, friction applies a force of -100 N
over a distance of 5 m. How much work is done by friction?
A. -500 J
B. -20 j
C. -100 J
D. -95 J
Answer:
A -500J
Explanation:
because W=Fs
100 × 5 = 500
The work done by friction is 500 J.
What is friction?
Friction is the force resisting the relative motion of solid surfaces, fluid layers, and material elements sliding against each other.There are several types of friction:
Dry friction is a force that opposes the relative lateral motion of two solid surfaces in contact. Dry friction is subdivided into static friction ("stiction") between non-moving surfaces, and kinetic friction between moving surfaces. With the exception of atomic or molecular friction, dry friction generally arises from the interaction of surface features, known as asperities
Fluid friction describes the friction between layers of a viscous fluid that are moving relative to each other.
Lubricated friction is a case of fluid friction where a lubricant fluid separates two solid surfaces.Skin friction is a component of drag, the force resisting the motion of a fluid across the surface of a body.
Internal friction is the force resisting motion between the elements making up a solid material while it undergoes deformation.
When surfaces in contact move relative to each other, the friction between the two surfaces converts kinetic energy into thermal energy (that is, it converts work to heat).
Learn more about friction
https://brainly.com/question/1424758
#SPJ2
calculate:An elcetric lamp is rated 240V and 40W. What is the cost of running the lamp for 62 hours if the elctricity authorities charges #2.50k per KWH
Explanation:
The voltage of the lamp, V = 240 V
Power of the lamp, P = 40 W
It is running for 62 hours.
The cost of running is $2.50k per KWH
Electric power is,
P = 40×62 Wh
= 2480 Wh
P = 2.48 kWh
At the rate of $2.5 per kWh
P = $6.2
So, the cost of running is $6.2 per kWh.
Scientists have developed a new type of solar cell with an efficiency of over 40 %.
The efficiency of the solar cell was confirmed independently by other scientists.
Suggest why it was important to confirm the efficiency independently.
Answer:
According to Carl Sagan's Baloney Detection Kit notes
"Whenever possible there must be independent confirmation of the facts"
Independent confirmation by other scientist is to ensure that the observation of the over 40% efficient solar panel is repeatable
It is also important to avoid accepting the given mandates at face value and accepting that the scientist considered all factors when taking the results or that the original developers has assigned others to check their findings before the introduction of the new type of solar cell
Explanation:
What is average speed???
Answer:
total distance dibide by total time
One block rests upon a horizontal surface. A second identical block rests upon the first one. The coefficient of static friction between the blocks is the same as the coefficient of static friction between the lower block and the horizontal surface. A horizontal force is applied to the upper block, and its magnitude is slowly increased. When the force reaches 52.1 N, the upper block just begins to slide. The force is then removed from the upper block, and the blocks are returned to their original configuration. What is the magnitude of the horizontal force that should be applied to the lower block, so that it just begins to slide out from under the upper block
Answer:
F = 156.3 N
Explanation:
Let's start with the top block, apply Newton's second law
F - fr = 0
F = fr
fr = 52.1 N
Now we can work with the bottom block
In this case we have two friction forces, one between the two blocks and the other between the block and the surface. In the exercise, indicate that the two friction coefficients are equal
we apply Newton's second law
Y axis
N - W₁ -W₂ = 0
N = W₁ + W₂
as the two blocks are identical
N = 2W
X axis
F - fr₁ - fr₂ = 0
F = fr₁ + fr₂
indicates that the lower block is moving below block 1, therefore the upper friction force is
fr₁ = 52.1 N
fr₁ = μ N
a
s the normal in the lower block of twice the friction force is
fr₂ = μ 2N
fr₂ = 2 μ N
fr₂ = 2 fr₁
we substitute
F = fr₁ + 2 fr₁
F = 3 fr₁
F = 3 52.1
F = 156.3 N
What is energy and what is the formula of energy
Answer:
Energy is: the ability to do work
The formula for energy is: power x time = energy
Explanation:
Hope this helps (there isn't really an explanation)
A 500-kg crate sits on a 10-degree ramp. If friction between the ramp and the crate is 800 N, what is the acceleration of the crate?
By Newton's second law, the net force acting on the crate parallel to the surface is
∑ F = mg sin(10°) - 800 N = ma
where m = 500 kg is the mass of the crate and a is the acceleration.
Solve for a :
a = ((500 kg) (9.80 m/s^2) sin(10°) - 800 N) / (500 kg)
a ≈ 0.102 m/s^2
What is the gravitational force between two objects?
Answer:
Gravitational force -an attractive force that exists between all objects with mass; an object with mass attracts another object with mass; the magnitude of the force is directly proportional to the masses of the two objects and inversely proportional to the square of the distance between the two objects.
Explanation:
hope it helped
A car and a large are moving with the same velocity. Which of the two is more difficult to
slow down? Why?
(Serious Answers Please)
Whichever object has more mass will need more energy to slow it down.
We don't know the mass of the car or the mass of the large.
None of this has anything to do with "difficult". We don't know what's difficult for you, and we don't know the SI unit of "difficult".
What is the difference between circular and rotatory motion?
Answer:
In a circular motion, the object just moves in a circle. In rotational motion, the object rotates about an axis. ... For example, Earth rotating on its own axis.
Answer:
Its different
Explanation:
it's different because
The initial momentum of a system is measured at 300 kg•m/s. Afterwards, the
momentum is measured to be 280 kg•m/s. What is the impulse of the system?
which type of material is the best sound absorber?
a. glass
b. wood
c. concrete
d. carpet
Explanation:
Glass is the best sound absorber material.
explain how conservation of mechanical energy occurs a kicking a ball
