Answer:
(a) 11.3 T
(b) 6.09 T
Explanation:
Current, I = 14 kA = 14000 A
number of turns, N = 900
inner radius, r = 0.7 m
outer radius, R = 1.3 m
The magnetic field due to a circular coil is given by
[tex]B = \frac{\mu o}{4\pi}\times \frac{2 N\pi I}{R}[/tex]
(a) The magnetic field due to the inner radius is
[tex]B = 10^{-7}\times \frac{2\times 900\times 3.14\times 14000}{0.7}\\\\B = 11.3 T[/tex]
(b) The magnetic field due to the outer radius is
[tex]B = 10^{-7}\times \frac{2\times 900\times 3.14\times 14000}{1.3}\\\\B = 6.09 T[/tex]
Cuộn dây có N = 1000 vòng, mỗi vòng có diện tích S = 20 cm2 đặt trong một từ trường đều. Trục của cuộn dây song song với vectơ cảm ứng từ của từ trường. Cho độ lớn B biến thiên, người ta thấy có suất điện động cảm ứng eC = 10V được tạo ra. Độ biến thiên cảm ứng từ là bao nhiêu trong thời gian ∆t = 10-2 s
16 100 g of water at 25 °C is poured into an insulating cup. 50 g of ice at 0 °C is added to the water.
The water is stirred until the temperature of the water has fallen to 0°C.
18 g of ice remains unmelted.
The specific heat capacity of water is 4.2 J /g °C.
Which value does this experiment give for the specific latent heat of fusion of ice?
Answer:
Q = Q
mcT = ml
100 x 4.2 x 25 = (50-18) l
l = 328
*Hope it helps*
The specific latent heat of fusion of the melted ice is 328.13 J/kg.
Conservation of energy
The specific latent heat of fusion of the melted ice is determined by applying the principle of conservation of energy as shown below;
Heat lost by the water = Heat gained by the ice
McΔθ = mL
where;
c is specific heat capacity of waterL is pecific latent heat of fusion of icem is mass of melted ice = 50 g - 18 g = 32 g(100)(4.2)(25) = (32)L
32L = 10500
L = 328.13 J/kg
Thus, the specific latent heat of fusion of the melted ice is 328.13 J/kg.
Learn more about heat capacity here: https://brainly.com/question/16559442
A sample of nitrogen gas is inside a sealed container. The volume of the container decreases while the temperature is kept constant. This is a ________ process.
a) isothermal
b) constant-volume
c) adiabatic
d) isobaric
what do you mean by supplementary quantities and its unit?
$ \large\boxed{ \sf \red{More ~Info :}}$
The units of supplementary quantities are dimensionless units.
[tex] \\ [/tex]
Imagine using brainly LOL COULDNT BE ME XD
Answer:
LOL! couldnt be me either bestieeeee
Answer:
-_-
Explanation:
i dont know What was XD??
determine the metacentric height of a cylinder of 4 m diameter and height of 4m floating in water with its axis vertical, if period of oscillation is 6 seconds
Answer:
-0.383 m
Explanation:
Diameter of cylinder = 4m therefore r = 2
height of cylinder ( H ) = 4 m
specific gravity = 0.6 ( assumed )
depth of immersion = 'h'
Determine the metacentric height
weight of cylinder in water = water displaced
= 0.6 * 1000 * πr^2* H = 1000 * πr^2* h
= 0.6 * 4 = h
∴ h = 2.4 m
hence the depth of center of buoyancy from free space = h /2 = 1.2 m
The metacentric height can be calculated using the formula below
Gm = Io / Vsubmerged - BG
attached below is the remaining solution
1. How much heat energy ( Q ) is required to heat 2.0 kg of copper from 30.0 oC to 80.0 oC?
Answer:
Heat capacity, Q = 38500 Joules
Explanation:
Given the following data;
Mass = 2 kg
Initial temperature, T1 = 30°C
Final temperature, T2 = 80°C
Specific heat capacity of copper = 385 J/Kg°C
To find the quantity of heat required;
Mathematically, heat capacity is given by the formula;
[tex] Q = mcdt [/tex]
Where;
Q represents the heat capacity or quantity of heat.
M represents the mass of an object.
C represents the specific heat capacity of water.
dt represents the change in temperature.
dt = T2 - T1
dt = 80 - 30
dt = 50°C
Substituting the values into the formula, we have;
[tex] Q = 2 * 385*50[/tex]
Heat capacity, Q = 38500 Joules
What is the difference between heat capacity and specific heat capacity? I want the meaning please.
Answer:
The heat capacity of a body is defined as the heat required to raise it's temperature by me degree or one kelvin.while specific heat capacity of a substance is defined as the heat required to the temperature of a unit mass of it through one degree or one kelvin.
I hope it helps
An electron experiences a downward force of 12.8×10-19 N while traveling in a magnetic field of 8×10-5 T west, what is the magnitude of the velocity?
Answer:
[tex]v=10^5\ m/s[/tex]
Explanation:
Given that,
Magnetic force acting on an electron, [tex]F=12.8\times 10^{-19}\ N[/tex]
The magnitude of the magnetic field,[tex]B=8\times 10^{-5}\ T[/tex]
We need to find the magnitude of the velocity. We know that the magnetic force is given by :
[tex]F=qvB[/tex]
Where
v is the velocity
So,
[tex]v=\dfrac{F}{qB}\\\\v=\dfrac{12.8\times 10^{-19}}{1.6\times 10^{-19}\times 8\times 10^{-5}}\\\\v=10^5\ m/s[/tex]
So, the magnitude of velocity is[tex]10^5\ m/s[/tex].
A vector points -43.0 units along the x axis, and 11.1 units along the y axis. Find the Direction of the vector.
Answer:
Explanation:
The direction of the vector implies only its angle, not its magnitude. The direction of the vector is found in
[tex]tan^{-1}(\frac{y}{x})[/tex] so
[tex]tan^{-1}(\frac{11.1}{-43.0})=-14.5[/tex] but since we are in QII (where x is negative and y is positive) we have to add 180 to this number to get a direction of 165.5 degrees
newtons second law lab report link
Answer:
ghittu iihg उह्स उउह्स उग्य्किव जिक्ह्ब
A convex mirror of radius of curvature 1.6 m has an object placed at a distance of 1.0 m from it. Find the position of image and the magnification.
Answer:
The image is formed at 0.44 m in front of the mirror
magnification (M) = 0.44
Explanation:
Applying, mirror formular
1/f = (1/u)+(1/v).................... Equation 1
Where f = Focal length of the convex mirror, u = object distance, v = image distance.
Using the real is positive convection,
From the question,
Given: f = -1.6/2 = -0.8 m( The focal length of a convex mirror is vitual), u = 1.0 m
Substitute these values into equation 1
-1/0.8 = (1/v)+(1/1)
Solve for v
1/v = 1.25+1
1/v = 2.25
v = 1/2.25
v = 0.44 m
Hence the image is formed at 0.44 m in front of the mirror
Magnification (M) = v/u
m = 0.44/1
m = 0.44
A blackbody radiator was expected to give off energy of increasing frequency
as its temperature increased. Which of the following ideas provided an
important step toward understanding why this was not observed?
A. Light is quantized and must be absorbed as a unit.
B. Electrons can act as both waves and particles.
C. Matter is quantized and cannot be broken down.
D. Large objects can be viewed as acting as waves.
Answer:
B.
Explanation:
Makes more sense to me
The Indianapolis speedway consists of a 2.5 mile track having four turns, each 0.25 mile long and banked at 9 12'
Answer: Your question is missing below is the question
Question : What is the no-friction needed speed (in m/s ) for these turns?
answer:
20.1 m/s
Explanation:
2.5 mile track
number of turns = 4
length of each turn = 0.25 mile
banked at 9 12'
Determine the no-friction needed speed
First step : calculate the value of R
2πR / 4 = πR / 2
note : πR / 2 = 0.25 mile
∴ R = ( 0.25 * 2 ) / π
= 0.159 mile ≈ 256 m
Finally no-friction needed speed
tan θ = v^2 / gR
∴ v^2 = gR * tan θ
v = √9.81 * 256 * tan(9.2°) = 20.1 m/s
Mike lives in the northern United States minnesota and nick lives in the southern United States Louisiana. When they both feel insulted by the same individual, nick will be more
Complete question is;
Mike lives in the northern United States (in Minnesota) and Nick lives in the southern United States (Louisiana). When they both feel insulted by the same individual, Nick will be more likely to have a(n) ________ cortisol response and show ________ levels of physical aggression.
Answer:
- A hyper cortisol response
- higher levels of physical aggression
Explanation:
In study of hormones in the human body, it has been discovered that cortisol is a stress inducing hormone. Now, if they are in the summer when it is hot, it has been proven that's when the cortisol hormone circulates in a very large manner in the blood. This leads to frustration and as well possibly physical aggression.
Nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
What is cortisol?Cortisol has been identified as a stress-inducing hormone in studies of hormones in the human body.
Mike lives in the northern United States (in Minnesota) and Nick lives in the southern United States (Louisiana).
When they both feel insulted by the same individual, Nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
Cushing syndrome is a condition characterized by elevated cortisol levels. This disorder is caused by your body producing too much cortisol.
Similar symptoms can occur after large doses of corticosteroids, thus this should be cleared out before testing for crushing syndrome.
Cortisol has been identified as a stress-inducing hormone in studies of hormones in the human body. Now, if they are in the summer when it is hot.
It has been proved that the cortisol hormone circulates in the blood in a very significant amount. This causes irritation and, in some cases, physical aggressiveness.
Hence nick will be more likely to have a(n) hyper cortisol response and show higher levels of physical aggression.
To learn more about cortisol refer to the link
https://brainly.com/question/7519944
If the mass of the Jupiter is 1.9*10 kg and radius is fbx loom what is acclerallon due to gravity on the supiter ?
Answer:
[tex]g=25.92\ m/s^2[/tex]
Explanation:
Given that,
The mass of the Jupiter,[tex]M=1.9\times 10^{27}\ kg[/tex]
The radius of Jupiter,[tex]r=69,911\ km=69911\times 10^3 km[/tex]
We need to find the acceleration due to gravity on Jupiter. The formula is
[tex]g=G\dfrac{M}{r^2}[/tex]
Put all the values,
[tex]g=6.67\times 10^{-11}\times \dfrac{1.9\times 10^{27}}{(69911\times 10^3)^2}\\\\g=25.92\ m/s^2[/tex]
So, the value of acceleration due to gravity on the Jupiter is [tex]25.92\ m/s^2[/tex].
A wire, 20m long, is heated from a temperature of 5°C to 55°C. If the change in length is 0.020m, calculate the linear expansivity of the wire.
Answer:
0.01998⁰C;¹
Explanation:
you can see all steps in photo
A mother is pulling a sled at constant velocity by means of a rope at 37°. The tension on the rope is 120 N. Mass of children plus sled is 55 kg. The mother has a mass of 61 kg.
a) Draw FBD for the sled with the kids as one object
b) Draw FBD for the mother
c) Find the normal force on the sled and on the mother
d) Find the kinetic friction acting on the sled and the static friction acting on the mother
e) Find the coefficient of kinetic friction for the sled
Answer:
Please find the complete solution in the attached file.
Explanation:
A basketball is shot by a player at a height of 2.0 m. The initial angle
was 53° above horizontal. At the highest point the ball was travelling 6
m/s. If he scored (the ball went through the rim that is 3.00 m above the
ground), what was the player’s horizontal distance from the basket?
Answer:
The answer is "8.28 m".
Explanation:
[tex]\to u \cos 53^{\circ}=6 \ \text{therefore the horizontal velocity is constant alaways}\\\\\therefore[/tex]
[tex]u= \frac{6 \times 5}{3}= \frac{30}{3}= 10\ \frac{m}{s}\\\\[/tex]
In the projectfile when vertical displacement is 1 then 5 m comes at farther sides
Using
[tex]S=ut-\frac{1}{2} gt^2\\\\1=u\sin 53^{\circ}\times t-5t^2\\\\1=8t-5t^2\\\\5t^2-8t+1=0\\\\ t=\frac{8\pm \sqrt{64-20}}{10} \\\\=\frac{8\pm 2\sqrt{11}}{10} \\\\t_2=\frac{8+2\sqrt{11}}{10} \\\\[/tex]
[tex]Distance=u \cos 53^{\circ}\times t_2\\\\[/tex]
[tex]=6 \times \frac{8\pm 2\sqrt{11}}{10} \\\\=\frac{24\pm 6\sqrt{11}}{5} \\\\= 8.28 \ m[/tex]
I don't know how to answer this question, can someone pls help?
- Explain how a wave can transmit energy to a medium without transporting matter.
Thank you for your time!
Answer:
Consider the energy the earth receives from the sun. The electromagnetic waves travel thru empty space until they interact with some medium surrounding the earth: ozone, atmosphere, solids, etc.
This is contrasted to longitudinal waves such as sound waves which can only travel thru the medium with which they interact.
Can someone pleassse help me
Answer:
ysss
datvklgfvj
tdgjbc
The primary circuit of a transformer has a voltage of 80 V and 300 windings. The secondary circuit has a voltage of 240. How many windings are there in the secondary circuit? *
Answer:
900 windings
Explanation:
Applying,
Vs/Vp = Ns/Np............. Equation 1
Where Vs = Secondary voltage, Vp = primary voltage, Ns = Number of turns in the secondary circuit, Np = number of turns in the primary circuit
make Ns the subject of the equation
Ns = VsNp/Vp........... Equation 2
From the question,
Given: Vs = 240 V, Np = 300 windings, Vp = 80 V
Substitute these values into equation 2
Ns = (240×300)/80
Ns = 900 windings
If the density of a substance is 5g/cm3 and the volume is 10cm3,
determine the mass.
Answer:
(5g/cm³)*(10cm³) = 50g
Explanation:
This is just a conversion formula. Easy to find using dimensional analysis.
(5g/cm³)*(10cm³) = 50g
Answer:
[tex]\boxed {\boxed {\sf 50 \ grams}}[/tex]
Explanation:
Density is the amount of mass per unit volume, so the formula is:
[tex]d = \frac{m}{v}[/tex]
The density of the substance is 5 grams per cubic centimeter and the volume is 10 cubic centimeters.
d= 5 g/cm³ v= 10 cm³Substitute the values into the formula.
[tex]5 g/cm^3 = \frac{m}{10 \ cm^3}[/tex]
We are solving for the mass, so we have to isolate the variable m. It is being divided by 10 cubic centimeters. The inverse of division is multiplication, so we multiply both sides of the equation by 10 cm³.
[tex]10 \ cm^3 *5 g/cm^3 = \frac{m}{10 \ cm^3} * 10 \ cm^3[/tex]
[tex]10 \ cm^3 *5 g/cm^3 = m[/tex]
The units of cubic centimeters (cm³) cancel.
[tex]10 *5 g = m[/tex]
[tex]50 \ g=m[/tex]
The mass of the substance is 50 grams.
How would you find the resistance of a parallel circuit with n identical resistors?
9514 1404 393
Answer:
R/n
Explanation:
For a given voltage V across each resistor R, the current is V/R. Since there are n parallel paths, the total current is n(V/R). The effective resistance is ...
Reff = V/I = V/(nV/R)
Reff = R/n
why solid keep their shape?
Answer:
Solids can hold their shape because their molecules are tightly packed together. ... Atoms and molecules in liquids and gases are bouncing and floating around, free to move where they want. The molecules in a solid are stuck in a specific structure or arrangement of atoms
Hope this helps ☆*:. o(≧▽≦)o .:*☆
A small emergency generator supplies 432 000 000 J of electrical energy in twenty-four hours. What is the average power output of the generator?
Answer:
P = 5 kW
Explanation:
Given that,
Electrical energy = 432 000 000 J
Time, t = 24 h = 86400 s
We need to find the power output of the generator. We know that,
Power = work done/time
So,
[tex]P=\dfrac{432 000 000}{86400}\\\\P=5000\ W[/tex]
or
P = 5 kW
So, the power output of the generator is 5 kW.
A car moves 20 km towards the North and then 35 km at an angle of 60o towards west of North. Its magnitude of displacement from the initial position will be
Answer:
15
Explanation:
displacement = initial position - final position
A blue line with 5 orange tick marks then one red tick mark then 4 orange tick marks. The number zero is above the red tick mark.Assume each tick mark represents 1 cm.Calculate the total displacement from 0 if an object moves 3 cm to the left, then 7 cm to the right, and then 6 cm to the left.The object moves cm to the left.What is the total distance the object travels? cm
Answer:
16 cm
Explanation:
Given that,
The object begins from 0 and moves 3cm towards left side followed by 7 cm towards the right and then, 6 cm towards the left side.
Let the x-axis to be the +ve and on the right side and -ve on the left
Thus, displacement would be:
= 0 -3 + 7 -6
= -2 cm
This implies that the object displaces 2cm towards the left.
While the total distance covered by the object equal to,
= 0cm + 3cm + 7cm + 6cm
= 16 cm
Thus, 16 cm is the total distance.
Answer:
Its 2 to the right
Explanation:
edge :p
what is the effect of pressure on boiling and melting substance?
Answer:
The boiling point of liquids always increases when pressure is applied on a liquid. This is because the molecules of a liquid will need more energy to turn into a gaseous state when pressure is applied on that substance.
Cual es el deporte que le da fortaleza y flexibilidad al cuerpo
Answer:
Aesthetic sports
Explanation:
Aesthetic sports are the one's that need well-developed physical qualities such as strength, agility, stamina, flexibility, and technical knowledge and artistry, in addition to technical ability and artistry. Elite athletes in these sports generally have a low abdominal fat , and the ranking is subjective.
In aesthetic sports like gymnastics, swimming, and figure skaters, dynamic and proactive flexibility is required.
