Answer:
[tex]{ \bf{momentum = mass \times velocity}} \\ \\ { \tt{35 = m \times 10}} \\ { \tt{mass = 3.5 \: kg}}[/tex]
PLEASE HELP
this is about volleyball
A good training partner helps with
• Setting the weight
• Using proper technique
• Keeping track of repetitions
• All of the above
Answer:
• All Of The Above
Hope it helps uh
Mark me as brainliest
an object that is 15 cm tall is placed 44 cm in front of a diverging lens. A virtual image appears -14cm in front of the lens. determine the focal length of the lens .
SHOW YOUR WORK.
A) 0.09cm
B)-20.53cm
C)10.6cm
D)-0.04cm
Answer:
The correct option is (b).
Explanation:
Given that,
The height of the object, h = 15 cm
Object distance, u = -44 cm
Image distance, v = -14 cm
We need to find the focal length of the lens. Using the lens formula.
[tex]\dfrac{1}{f}=\dfrac{1}{v}-\dfrac{1}{u}\\\\\dfrac{1}{f}=\dfrac{1}{(-14)}-\dfrac{1}{(-44)}\\\\f=-20.53\ cm[/tex]
So, the focal length of the lens (-20.53 cm).
say I have two rocks of different sizes but are taken from the same rock. Will their density be equalvilent
yes their density are equal
Neha and Reha are playing see-saw.Neha is sitting 60cm away from the fulcrum and Reha is sitting 40cm away from the fulcrum.Calculate the effort that Reha should apply to lift Neha.The weight of Neha is 360N.
Answer:
Effort = 540 Newton
Explanation:
Given the following data;
Load arm = 60 cm
Effort arm = 40 cm
Load = 360 N
Conversion:
100 cm = 1 meters
40 cm = 40/100 = 0.4 meters
60 cm = 60/100 = 0.6 meters
To calculate the effort that Reha should apply to lift Neha, we would use the expression;
Effort * effort arm = load * load arm
Substituting into the expression, we have;
Effort * 0.4 = 360 * 0.6
Effort * 0.4 = 216
Effort = 216/0.4
Effort = 540 Newton
1o4 Fahrenheit is equal to
Answer:
40 degrees Celsius
Explanation:
Have a great summer :)
Does understanding Earth’s place in the universe and the relationships of different objects in the solar system help people plan for the future of our planet?
Answer:
Yes
Explanation:
If there were to be a supernova of a star or a planet/meter that was directed at earth, then we would know in advance and make a plan to stop it
uses of convex mirrors
Explanation:
Two uses of convex mirror are: (i) It is used as a rear view mirror in vehicles. (ii) It is used as a vigilance mirror. (iii) it is used as a reflector in street lamps.
Explanation:
Inside buildings. You might have noticed that large office buildings, stores, hospitals, and other many other buildings have convex mirrors in the corners. ...
Sunglasses. We might have used sunglasses many times. ...
Vehicle mirrors. ...
Magnifying glasses. ...
For security purposes. ...
Street light reflectors.
En el proceso de diseño de ingeniería, ¿qué limitaciones deben tenerse en cuenta al utilizar un modelo / prototipo?
Answer:
Las limitaciones de un modelo o prototipo son;
1) Los parámetros ambientales (donde se opera el modelo, prototipo o producto) son diferentes y, por lo tanto, pueden producir relaciones y factores ambientales que serán diferentes de los factores ambientales y las relaciones del objeto real.
2) El análisis del problema puede ser inadecuado
3) La posibilidad de falta de satisfacción del cliente con un modelo, preferencia por la demostración real del producto.
4) Reproducción inexacta del entorno del producto durante la prueba del modelo
5) El factor de costo del modelo
6) Mayor complejidad introducida por el modelo / prototipo al análisis de la solución
Explanation:
El modelo o prototipo es la presentación del diseño articulado, construido para demostrar el producto real con el propósito de encontrar la existencia de errores en el diseño que serían corregidos, antes de que se realice la producción real
Please help! This is due in 10 minutes!! I will mark brainliest asap
Select the correct answer. Based on the law of conservation of energy, which statement is correct? A. Energy is always being added to all parts of the Universe. B. Energy is often destroyed in some parts of the Universe. C. Energy in a closed system cannot change forms. D. Energy in an isolated system remains constant.
Answer:
D. Energy in an isolated system remains constant.
Explanation:
Energy can be defined as the ability (capacity) to do work. The two (2) main types of energy are;
a. Gravitational potential energy (GPE): it is an energy possessed by an object or body due to its position above the earth.
b. Kinetic energy (KE): it is an energy possessed by an object or body due to its motion.
Furthermore, the various forms of energy are solar energy, electrical energy, chemical energy, thermal energy, wind energy, nuclear energy etc.
The Law of Conservation of Energy states that energy cannot be destroyed but can only be transformed or converted from one form to another.
According to the law of conservation of energy, we can infer or deduce that the total energy of the system must stay the same because it cannot be destroyed, but kinetic energy (KE) can be transformed to potential energy (PE) and potential energy (PE) can be transformed to kinetic energy (KE) within the system.
Scientists have developed a new type of solar cell with an efficiency of over 40 %.
The efficiency of the solar cell was confirmed independently by other scientists.
Suggest why it was important to confirm the efficiency independently.
Answer:
According to Carl Sagan's Baloney Detection Kit notes
"Whenever possible there must be independent confirmation of the facts"
Independent confirmation by other scientist is to ensure that the observation of the over 40% efficient solar panel is repeatable
It is also important to avoid accepting the given mandates at face value and accepting that the scientist considered all factors when taking the results or that the original developers has assigned others to check their findings before the introduction of the new type of solar cell
Explanation:
digestion that takes place in the mouth.
calculate:An elcetric lamp is rated 240V and 40W. What is the cost of running the lamp for 62 hours if the elctricity authorities charges #2.50k per KWH
Explanation:
The voltage of the lamp, V = 240 V
Power of the lamp, P = 40 W
It is running for 62 hours.
The cost of running is $2.50k per KWH
Electric power is,
P = 40×62 Wh
= 2480 Wh
P = 2.48 kWh
At the rate of $2.5 per kWh
P = $6.2
So, the cost of running is $6.2 per kWh.
Number of conducting plates of a multiplate capacitor is 5. The no. Of capacitors is
A.1
B.2
C.3
D.4
(Ans with explanation pls)
Answer:
4 capacitors
Explanation:
Given
[tex]n = 5[/tex] --- conducting plates
Required
The number of capacitor (c)
This is calculated as:
[tex]c = n - 1[/tex]
So, we have:
[tex]c = 5 - 1[/tex]
[tex]c = 4[/tex]
6) A car of mass 1000kg moving with a velocity of 40m/s collides with a tree and comes to stop in 5s. What will be the force exerted by the car on the tree?
Answer:
Refer to the attachment!~
what two forces contribute to the nuclear tug of war in an atom
Answer:2 protons and 2 neutrons
Explanation:In Nuclei, There are 2 forces. 1 force is electrostatic and acts as repulsion between 2 protons. The other is force of attraction called Nuclear force between 2 neutrons.
Which will a positively charged object attract
¿Cuál es el valor del coeficiente de roce estático entre dos superficies, sabiendo que para poner en movimiento un cuerpo de 35kg. Es necesario, vencer una fuerza de resistencia de 45 Newton?
Answer:
El coeficiente de roce estático entre las dos superficies es 0.131.
Explanation:
El coeficiente de roce estático entre dos superficies ([tex]\mu_{s}[/tex]), sin unidad, es igual a la fuerza de resistencia ([tex]F[/tex]), en newtons, dividida por el peso del cuerpo a mover ([tex]W[/tex]), en newtons.
[tex]\mu = \frac{F}{m\cdot g}[/tex] (1)
Donde:
[tex]m[/tex] - Masa, en kilogramos.
[tex]g[/tex] - Aceleración gravitacional, en metros por segundo al cuadrado.
Si sabemos que [tex]F = 45\,N[/tex], [tex]m = 35\,kg[/tex] y [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], entonces el coeficiente de roce estático es:
[tex]\mu = \frac{45\,N}{(35\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)}[/tex]
[tex]\mu = 0.131[/tex]
El coeficiente de roce estático entre las dos superficies es 0.131.
The valid digits in a measurement are called _____ digits.
Answer:
Significant
Explanation:
As the word suggests, significant figures or digits are numbers that are valid in measurement.
Answer:
SIGNIFICANT DIGITS
Explanation:
MARK ME BRAINLIEST PLZZZ
A solar panel is used to recharge a battery. The solar panel produces 0.80 W of electrical power. The panel is 20% efficient. What is the power input of the sunlight onto the solar panel? * 1 point 0.16 W 4.0 W 8.0 W 16.0 W
Answer:
Input power, Ip = 4 Watts
Explanation:
Given the following data;
Power output = 0.8 Watts
Efficiency = 20%
To find the power input of the sunlight onto the solar panel;
Mathematically, the efficiency of a machine is given by the formula;
[tex] Efficiency = \frac {Out-put \; power}{In-put \; power} * 100 [/tex]
Substituting into the formula, we have;
[tex] 20 = \frac {0.8}{Ip} * 100 [/tex]
[tex] 20 = \frac {80}{Ip} [/tex]
Cross-multiplying, we have;
[tex] 20Ip = 80 [/tex]
[tex] Ip = \frac {80}{20} [/tex]
Input power, Ip = 4 Watts
A.All three bulbs will go out
B.Bulbs 2 and 3 will go out, but bulb 1 will remain lit
C. All three bulbs will go out
D. Bulb 3 will go out, but bulbs 1 and 2 remain lit
Answer:
(D)
Explanation:
When switch C is opened then, Current is not flowing across 3 So bulb 3 will go out.
But current is flowing across 1 and 2 bulb because their switch is closed
therefore bulb 1 and 2 will remain it.
Hence, option (D) will be correct.
Why does Quito, Equator has very little changes to the daylight hours
throughout the year?
Because of the position on the equator, the change in rotation of the Earth on its axis throughout the year doesn't affect it much. Unlike the poles, Quito is almost constantly in direct view of the sun. So, because of lack of change in rotation, the daylight hours are hardly varied as Quito is almost constantly in more or less the same spot in relation to the sun.
When the interval between the stimuli decreases, _______.
A. a second action potential is generated until the interval reaches the absolute refractory period
B. a second action potential is generated regardless of the stimulus and the interval
C. a second action potential is generated until the interval reaches the relative refractory period
D. a second action potential is generated as long as the stimulus is above threshold
Answer:
The correct option is A. a second action potential is generated until the interval reaches the absolute refractory period.
Explanation:
The inter-stimulus interval (ISI) is the temporal interval between two successive stimuli, measured from the offset of the first stimulus to the commencement of the second.
A cell's refractory period is the time during which it is unable to replicate an action potential. Therefore, the absolute refractory period is the amount of time it takes for a second action potential to be initiated, regardless of how large a stimulus is applied repeatedly.
A second action potential is generated when the gap between the stimuli decreases until the interval reaches the absolute refractory period.
Therefore, the correct option is A. a second action potential is generated until the interval reaches the absolute refractory period.
That is, when the interval between the stimuli decreases, a second action potential is generated until the interval reaches the absolute refractory period.
What is energy and what is the formula of energy
Answer:
Energy is: the ability to do work
The formula for energy is: power x time = energy
Explanation:
Hope this helps (there isn't really an explanation)
I need this now
On the planet Xenos, an astronaut observes that a 2.0 m long pendulum has a period of 2.2 s.
What is the free-fall acceleration on Xenos? *
Answer:
[tex]g=16.31\ m/s^2[/tex]
Explanation:
Given that,
The length of the pendulum, l = 2 m
The period of the pendulum, T = 2.2 s
The formula for the time period of a pendulum is given by :
[tex]T=2\pi \sqrt{\dfrac{l}{g}}[/tex]
or
[tex]T^2=4\pi ^2\dfrac{l}{g}\\\\g=\dfrac{4\pi ^2l}{T^2}\\\\g=\dfrac{4\pi ^2\times 2}{(2.2)^2}\\\\g=16.31\ m/s^2[/tex]
So, the free fall acceleration is [tex]16.31\ m/s^2[/tex].
Which of the following describes plastic? HELP
A. A material that as a low resistivity and prevents charges from moving freely
B A material that has a high resistivity and allows charges to move freely
C A material that has a low resistivity and allows charges to move freely
B A material that has a high resistivity and prevents charges from moving freely
Answer:
D
Explanation:
A material that has a high resistivity and prevents charges from moving freely... it is part of insulators...
Plastic is a material that has a high resistivity and prevents charges from moving freely. Option D is correct.
What is plastic?Plastic is described as a material that comprises an organic compound with a significant molecular weight as an important element.
Insulators are often defined as materials that do not allow electricity to flow through them.
Insulators are also referred to as poor electrical conductors. Insulators include materials such as paper, glass, rubber, and plastic.
Plastic is a material that has a high resistivity and prevents charges from moving freely.
Hence option D is correct.
To learn more about the plastic refer to the link;
https://brainly.com/question/23509463
A runner is traveling with an initial velocity of 0.3 m/s in the positive direction accelerates at a constant rate of 0.4m/s^2 for a time of 2 seconds. What is the velocity at the end of 2 seconds?
Answer:
1.1 m/s
Explanation:
Applying,
v = u+at.............. Equation 1
Where v = final velocity, u = initial velocity, a = acceleration, t = time.
From the question,
Given: u = 0.3 ms, a = 0.4 m/s², t = 2 seconds
Substitute these values into equation 1
v = 0.3+0.4(2)
v = 0.3+0.8
v = 1.1 m/s
Hence the velocity at the end of 2 seconds is 1.1 m/s
What is the pH when just enough ammonia solution is added to react with all the nitric acid?
Answer:
<7
Explanation:
This is a reaction between a steong acid and a weak base which produces a acidic salt at equvalence point. Hence pH is less than 7
What is the gravitational force between two objects?
Answer:
Gravitational force -an attractive force that exists between all objects with mass; an object with mass attracts another object with mass; the magnitude of the force is directly proportional to the masses of the two objects and inversely proportional to the square of the distance between the two objects.
Explanation:
hope it helped
One block rests upon a horizontal surface. A second identical block rests upon the first one. The coefficient of static friction between the blocks is the same as the coefficient of static friction between the lower block and the horizontal surface. A horizontal force is applied to the upper block, and its magnitude is slowly increased. When the force reaches 52.1 N, the upper block just begins to slide. The force is then removed from the upper block, and the blocks are returned to their original configuration. What is the magnitude of the horizontal force that should be applied to the lower block, so that it just begins to slide out from under the upper block
Answer:
F = 156.3 N
Explanation:
Let's start with the top block, apply Newton's second law
F - fr = 0
F = fr
fr = 52.1 N
Now we can work with the bottom block
In this case we have two friction forces, one between the two blocks and the other between the block and the surface. In the exercise, indicate that the two friction coefficients are equal
we apply Newton's second law
Y axis
N - W₁ -W₂ = 0
N = W₁ + W₂
as the two blocks are identical
N = 2W
X axis
F - fr₁ - fr₂ = 0
F = fr₁ + fr₂
indicates that the lower block is moving below block 1, therefore the upper friction force is
fr₁ = 52.1 N
fr₁ = μ N
a
s the normal in the lower block of twice the friction force is
fr₂ = μ 2N
fr₂ = 2 μ N
fr₂ = 2 fr₁
we substitute
F = fr₁ + 2 fr₁
F = 3 fr₁
F = 3 52.1
F = 156.3 N
