Answer:
0.40905 - 0.10204 = .30701 = 30.7 %
Step-by-step explanation:
0.23 0.40905
1.27 0.10204
An appliance uses 120 W. If this appliance is on for 8 hours a day, how much CO2 will this produce in the month of April?
...
Calculate Energy Cost by Appliance
Multiply the device's wattage by the number of hours the appliance is used per day.Divide by 1000.Multiply by your kWh rate.hope it's helpful for you!!..pls give me brainlist !!....Muhammad lives twice as far from the school as Hita. Together, the live a total of 12 km
from the school. How far away drom the school does each of them live?
Answer:
Muhammad lives 8 km away from the school.
Hita lives 4 km away from the school.
Step-by-step explanation:
First of all, find a number that, when you double that number and add both numbers, you will get 12. That number is 4. So double 4 and get 8. Then add both to get 12.
Which of the following could be the equation of the graph shown below?
Answer:
According to the proposed interrogate, as well as the graph provided, the correct answers to such are identified as B. Y = -2x + 5 and C. 2x + y = 4.
Step-by-step explanation:
To evaluate such, a comprehension of linear Cartesian data is required:
Slope = rise/run. If there is a negative rise, the direction of the line is proportional to the left-hand side as it exponentially grows or augments in units.
Y-intercept: The peculiar point in which the linear data observed intersects the y-axis.
X-intercept: The peculiar point in which the linear data observed intersects the x-axis.
Since this is a negative linear, all negative slopes apply.
The interrogate states, “Check all that apply.” Thus, there may be more than one correct answer, shall such be disseminated.
A. Cannot be the answer as the line should have been a horizontal line contained within quadrants I and II on the Cartesian Plane.
B. Contains a negative slope, thus is disclosed as a correct answer.
C. This configuration is denoted in “Standard Form” or “General Form”. To convert this to “Slope-Intercept Form” the following must be executed mathematically:
2x + y = 4
Y = -2x + 4 <== Slope-Intercept Form (Contains a negative slope, thus considered a correct answer.
D. Likewise, this configuration is denoted in “Standard Form” or “General Form”. To convert this to “Slope-Intercept Form” the following must be executed mathematically:
X - y = 9
-y = -x + 9
Y = x - 9 <== Slope-Intercept Form (Cannot be considered as the correct answer, given the positive slope configuration, thus is marked out).
Thus far, as evaluated, the correct answers to the proposed interrogate, as according to the linear data provided in the Cartesian Plane is acknowledged, and henceforth disseminated, as B. Y = -2x + 5 and C. 2x + y = 4.
*I hope this helps.
The edge roughness of slit paper products increases as knife blades wear. Only 2% of products slit with new blades have rough edges, 3% of products slit with blades of average sharpness exhibit roughness, and 4% of products slit with worn blades exhibit roughness. If 25% of the blades in the manufacturing are new, 60% are of average sharpness, and 15% are worn, what is the proportion of products that exhibit edge roughness
Answer:
The proportion of products that exhibit edge roughness is 0.029 = 2.9%.
Step-by-step explanation:
Proportion of products that exhibit edge roughness:
2% of 25%(new blades).
3% of 60%(average sharpness).
4% of 15%(worn). So
[tex]p = 0.02*0.25 + 0.03*0.6 + 0.04*0.15 = 0.029[/tex]
The proportion of products that exhibit edge roughness is 0.029 = 2.9%.
Samir estimates the value of Three-fifths times 16.1. Which estimate is reasonable?
3
9
12
15
Answer: 9
Step-by-step explanation:
[tex] \frac{3}{5} \times 16.1 = 9.66[/tex]
lisa used 880g of a container of sugar to bake a cake and 1/10 of the creaming sugar to make cookies. She then had 3/7 of the container of sugar left. How much sugar was in the container at first
Answer:
At the beginning, there were 2,678.26 grams of sugar in the container.
Step-by-step explanation:
Since Lisa used 880g of a container of sugar to bake a cake and 1/10 of the creaming sugar to make cookies, and she then had 3/7 of the container of sugar left, to determine how much sugar was in the container at first, the following calculation must be performed:
880 + 1 / 10X = 3 / 7X
880 + 0.1X = 0.4285X
880 = 0.4285X - 0.1X
880 = 0.3285X
880 / 0.3285 = X
2,678.26 = X
Therefore, at the beginning there were 2,678.26 grams of sugar in the container.
Please help …………………….
9514 1404 393
Answer:
(-3, 3)
Step-by-step explanation:
The blanks are trying to lead you through the process of finding the point of interest.
__
The horizontal distance from T to S is 9 . (or -9, if you prefer)
The ratio you're trying to divide the line into is the ratio that goes in this blank:
Multiply the horizontal distance by 2/3 . (9×2/3 = 6)
Move 6 units left from point T.
The vertical distance from T to S is 6 .
Multiply the vertical distance by 2/3 . (6×2/3 = 4)
Move 4 units up from point T.
__
Point T is (3, -1) so 6 left and 4 up is (3, -1) +(-6, 4) = (3-6, -1+4) = (-3, 3). The point that is 2/3 of the way from T to S is (-3, 3).
find the length of side x
Answer:
x=8
Step-by-step explanation:
What is the range of possible sizes for side x? Please help!
Answer:
x is smaller than 5.6 and greater than 0
14. Divide and write the fraction or mixed number in its simplest form:1/4÷3/8
Answer:
1/4 ÷ 3/8 = 2/3
Step-by-step explanation:
When dividing fractions, you have to take the reciprocal of the second fraction, then multiply from there. The reciprocal of a fraction is basically flipped. So then, 1/4 ÷ 3/8 becomes 1/4 x 3/8. Multiplying fractions should be pretty straight forward as you just need to multiply numerator (top number of a fraction) with numerator and vice versa for the denominators (bottom number of a fraction).
So then you get: (1 x 8)/(3 x 4) = 8/12. Then you just simplify it by dividing the numerator and denominator by their greatest possible factor, which in this case is 4. So then, (8 ÷ 4)/(12 ÷ 4) = 2/3.
In a certain survey, 513 people chose to respond to this question: "Should passwords be replaced with biometric security (fingerprints, etc)?" Among the respondents, 53% said "yes." We want to test the claim that more than half of the population believes that passwords should be replaced with biometric security. Complete parts (a) through (d) below. a. Are any of the three requirements violated? Can a test about a population proportion using the normal approximation method be used?
Answer:
The sample observations are not a randomsample, so a test about a population proportion using the normal approximating method cannot be used.
Step-by-step explanation:
The necessary conditions are
The sample must be random and independently selected from the normally distributed population.
n*p and n*q both must be greater than 5
There must be two outcomes "success" and "failure"
The number of trials must be fixed.
From the given information 2), 3)and 4) conditions are satisfied, but not 1) because we are not given that people are selected randomly.
Answer: The sample observations are not a randomsample, so a test about a population proportion using the normal approximating method cannot be used.
A two-dimensional vector has an x-component of 10.3~\text{meters}10.3 meters and a y-component of 4.30~\text{meters}4.30 meters. Calculate the angle (in degrees) that this two-dimensional vector makes with the positive x-axis.
9514 1404 393
Answer:
23°
Step-by-step explanation:
The angle a vector makes relative to the +x axis is found as ...
α = arctan(y/x) = arctan(4.30/10.3) ≈ 22.66°
The angle is about 23°.
__
Additional comment
This vector resides in the first quadrant, so no adjustment of the angle is needed. In other quadrants, 180° may need to be added or subtracted from the angle given by the arctan function to arrive at the correct value. (Some calculators and spreadsheets have an ATAN2(x, y) function that takes signs into account.)
A savings and loan association needs information concerning the checking account balances of its local customers. A random sample of 14 accounts was checked and yielded a mean balance of $664.14 and a standard deviation of $279.29. Find a 99% confidence interval for the true mean checking account balance for local customers.
Answer:
The 99% confidence interval for the true mean checking account balance for local customers is ($439.29, $888.99).
Step-by-step explanation:
We have the standard deviation for the sample, which means that the t-distribution is used to solve this question.
The first step to solve this problem is finding how many degrees of freedom, we have. This is the sample size subtracted by 1. So
df = 14 - 1 = 13
99% confidence interval
Now, we have to find a value of T, which is found looking at the t table, with 13 degrees of freedom(y-axis) and a confidence level of [tex]1 - \frac{1 - 0.99}{2} = 0.995[/tex]. So we have T = 3.0123
The margin of error is:
[tex]M = T\frac{s}{\sqrt{n}} = 3.0123\frac{279.29}{\sqrt{14}} = 224.85[/tex]
In which s is the standard deviation of the sample and n is the size of the sample.
The lower end of the interval is the sample mean subtracted by M. So it is 664.14 - 224.85 = $439.29
The upper end of the interval is the sample mean added to M. So it is 664.14 + 224.85 = $888.99.
The 99% confidence interval for the true mean checking account balance for local customers is ($439.29, $888.99).
Quick can someone plot these in a scatter plot
(9.2,2.33)
(19.5,3.77)
(15.5,3.92)
(0.7,1.11)
(21.9,3.69)
(0.7,1.11)
(16.7,3.5)
(0.7,1.11)
(18,4)
(18,3.17)
The scatterplot is below.
I used GeoGebra to make the scatterplot. Though you could use other tools such as Excel or Desmos, or lots of other choices.
Side note: I'm not sure why, but you repeated the point (0.7,1.11) three times.
An absolute value function has
A. Curved lines that only increases and decreases.
B. Straight lines that do both increase ,decrease, or stay constant on the same graph
C.Straight line that do both increase and decrease on the same graph
D. Straight lines that only increase or decrease
E. Curved lines that do both increase and decrease on the same graph
I really need help please
what is this?
Answer:
431.2
Step-by-step explanation:
Area of a regular polygon = # of sides * side length of 1 side * apothem
We want to find the area of a regular polygon with 7 sides, an apothem of 8 meters, and a side length with 7.7 meters
So # of sides = 7
apothem = 8
side length = 7.7
so the area would equal 7 * 8 * 7.7 = 431.2
It says to round to the nearest tenth however 431.2 is already rounded to the nearest tenth
Answer:
That answer ^ is incorrect. The correct answer ( in acellus that is ) is 2
15.6
Step-by-step explanation:
Coordinate plane with quadrilaterals EFGH and E prime F prime G prime H prime at E 0 comma 1, F 1 comma 1, G 2 comma 0, H 0 comma 0, E prime negative 1 comma 2, F prime 1 comma 2, G prime 3 comma 0, and H prime negative 1 comma 0. F and H are connected by a segment, and F prime and H prime are also connected by a segment. Quadrilateral EFGH was dilated by a scale factor of 2 from the center (1, 0) to create E'F'G'H'. Which characteristic of dilations compares segment F'H' to segment FH
Answer:
[tex]|F'H'| = 2 * |FH|[/tex]
Step-by-step explanation:
Given
[tex]E = (0,1)[/tex] [tex]E' = (-1,2)[/tex]
[tex]F = (1,1)[/tex] [tex]F' = (1,2)[/tex]
[tex]G = (2,0)[/tex] [tex]G' =(3,0)[/tex]
[tex]H = (0,0)[/tex] [tex]H' = (-1,0)[/tex]
[tex](x,y) = (1,0)[/tex] -- center
[tex]k = 2[/tex] --- scale factor
See comment for proper format of question
Required
Compare FH to F'H'
From the question, we understand that the scale of dilation from EFGH to E'F'G'H is 2;
Irrespective of the center of dilation, the distance between corresponding segment will maintain the scale of dilation.
i.e.
[tex]|F'H'| = k * |FH|[/tex]
[tex]|F'H'| = 2 * |FH|[/tex]
To prove this;
Calculate distance of segments FH and F'H' using:
[tex]d = \sqrt{(x_1 - x_2)^2 + (y_1 - y_2)^2}[/tex]
Given that:
[tex]F = (1,1)[/tex] [tex]F' = (1,2)[/tex]
[tex]H = (0,0)[/tex] [tex]H' = (-1,0)[/tex]
We have:
[tex]FH = \sqrt{(1- 0)^2 + (1- 0)^2}[/tex]
[tex]FH = \sqrt{(1)^2 + (1)^2}[/tex]
[tex]FH = \sqrt{1 + 1}[/tex]
[tex]FH = \sqrt{2}[/tex]
Similarly;
[tex]F'H' = \sqrt{(1 --1)^2 + (2 -0)^2}[/tex]
[tex]F'H' = \sqrt{(2)^2 + (2)^2}[/tex]
Distribute
[tex]F'H' = \sqrt{(2)^2(1 +1)}[/tex]
[tex]F'H' = \sqrt{(2)^2*2}[/tex]
Split
[tex]F'H' = \sqrt{(2)^2} *\sqrt{2}[/tex]
[tex]F'H' = 2 *\sqrt{2}[/tex]
[tex]F'H' = 2\sqrt{2}[/tex]
Recall that:
[tex]|F'H'| = 2 * |FH|[/tex]
So, we have:
[tex]2\sqrt 2 = 2 * \sqrt 2[/tex]
[tex]2\sqrt 2 = 2\sqrt 2[/tex] --- true
Hence, the dilation relationship between FH and F'H' is::
[tex]|F'H'| = 2 * |FH|[/tex]
Answer:NOTT !! A segment in the image has the same length as its corresponding segment in the pre-image.
Step-by-step explanation:
Which of the following is the graph of
(x - 1)^2 + (y + 2)^2 = 4 ?
Answer:
a
Step-by-step explanation:
The correct answer is option C which is the graph of the equation ( x-1 )² + ( y+ 2 )² = 4 will be the circle in the third and the fourth quadrant.
What is a graph?A graph is the representation of the data on the vertical and horizontal coordinates so we can see the trend of the data.
Given equation is ( x-1 )² + ( y + 2 )² = 4
The graph of the equation is attached with the answer below when we plot the graph we will get the circle that is lying in the third and the fourth quadrant.
Therefore the correct answer is option C which is the graph of the equation ( x-1 )² + ( y+ 2 )² = 4 will be the circle in the third and the fourth quadrant.
To know more about graphs follow
https://brainly.com/question/25020119
#SPJ2
sin x - cos x - 1/√2 = 0
Find the value of x
Answer:
Step-by-step explanation:
The starting salaries of individuals with an MBA degree are normally distributed with a mean of $40,000 and a standard deviation of $5,000. What percentage of MBA's will have starting salaries of $34,000 to $46,000
Answer:
The correct answer is "76.98%".
Step-by-step explanation:
According to the question,
⇒ [tex]P(34000<x<46000) = P[\frac{34000-40000}{5000} <\frac{x- \mu}{\sigma} <\frac{46000-40000}{5000} ][/tex]
[tex]=P(-1.2<z<1.2)[/tex]
[tex]=P(z<1.2)-P(z<-1.2)[/tex]
[tex]=0.8849-0.1151[/tex]
[tex]=0.7698[/tex]
or,
[tex]=76.98[/tex]%
A. If x:y= 3:5, find = 4x + 5 : 6y -3
Answer:
17 : 27
Step-by-step explanation:
x=3
y=5
4(3)+5 : 6(5)-3
= 12+5 : 30-3
= 17 : 27
Evaluate the expression 3√64
Answer:
4
Step-by-step explanation:
We want the cubed root of 64
(64)^(1/3)
(4*4*4) ^ (1/3)
4
Unless this is 3 * sqrt(64)
then it would be
3 sqrt(8*8)
3 (8)
24
An experiment consists of tossing a pair of balanced, six-sided dice. (a) Use the combinatorial theorems to determine the number of sample points in the sample space S. 36 Correct: Your answer is correct. sample points (b) Find the probability that the sum of the numbers appearing on the dice is equal to 6. (Round your answer to four decimal places.)
Answer:
Sample space = 36
P(sum of 6) = 5/36
Step-by-step explanation:
Number of faces on a dice = 6
The sample space, for a toss of 2 dice ; (Number of faces)^number of dice
Sample space = 6^2 = 6*6 = 36
Sum of numbers appearing on the dice = 6
The sum of 6 from the roll of two dice has 5 different outcomes ; Hence, required outcome = 5
Total possible outcomes = sample space = 36
Probability, P = required outcome / Total possible outcomes
P = 5 / 36
Probabilities are used to determine the chances of events
The given parameters are:
[tex]n=6[/tex] --- the faces of a six-sided die
[tex]r = 2[/tex] -- the number of dice
(a) The number of sample points
This is calculated as:
[tex]Sample = n^r[/tex]
So, we have:
[tex]Sample = 6^2[/tex]
Evaluate the exponent
[tex]Sample = 36[/tex]
Hence, the number of sample points is 36
(b) The probability that the sum of 6
See attachment for the sample space of the sum of two dice.
From the sample space, there are 5 outcomes where the sum is 6.
So, the probability is:
[tex]Pr = \frac{5}{36}[/tex] --- where 36 represents the number of sample points
Divide 5 by 36
[tex]Pr = 0.1389[/tex]
Hence, the probability that the sum of the numbers appearing on the dice is equal to 6 is 0.1389
Read more about probabilities at:
https://brainly.com/question/10707698
Select all that apply.
Given the points (5, 10) and (-4,-8), which of the following are true about the line passing through these points?
The line has a slope of 1/2
The line represents a direct variation function
The point (6.3) is also on the line
The line has a slope of 2
HELP PLEASE I CANNOT FAIL PLEASE!!!!!!!
Which statement correctly compares the two functions?
A.
They have the same y-intercept and the same end behavior as x approaches ∞.
B.
They have the same x- and y-intercepts.
C.
They have the same x-intercept but different end behavior as x approaches ∞.
D.
They have different x- and y-intercepts but the same end behavior as x approaches ∞.
Answer:
B
Step-by-step explanation:
they have the same intercepts
Given:
HI and JK intersect at point O.
m KOH = 110
Colleen was asked to find the measure of x and explain her reasoning
Line geometry are caused from the intersection of two line. The measure of angle x from the diagram is 110degrees
Linear geometryLine geometry are caused from the intersection of two lines. From the given figures, you can see that <KOH and <IOK forms a linear pair, hence;
<KOH + <IOK = 180
110 + <IOK = 180
<IOK = 180 - 110
<IOK = 70 degrees
Similarly <x and MIOK are linear pair pair such that <x + 1<IOK = 180
<x + 70 =180
<x = 180 - 70
<x = 110degrees
Hence the measure of angle x from the diagram is 110degrees
Learn more on line geometry here: https://brainly.com/question/7098341
#SPJ1
Answer:
<IOK = 70 degrees
<x and <IOK form a linear pair, so m<x is = 110
Step-by-step explanation:
i did it on khan and got it right, i hope your day goes well and you get all your other questions right :)
The strength of the association rule is known as _____ and is calculated as the ratio of the confidence of an association rule to the benchmark confidence.
Answer:
Lift
Step-by-step explanation:
Finding patterned and relationship between large sets of data can be obtained using the association rule as it finds insights, relationships and trends within sets of data variables. Lift is a parmater of interest whichbus used when performing analysis on association between variables in datasets. The Lift is literally the ratio of confidence to expected confidence. Where, the confidence of association is divided by the expected confidence (benchmark confidence).
The product of 86 and the depth of the river
Answer:
Step-by-step explanation:
Are you trying to find a variable expression? the product of 86 means multiplication so 86*n or 86n. Other than that I dont understand the question.
Claims from Group A follow a normal distribution with mean 10,000 and standard deviation 1,000. Claims from Group B follow a normal distribution with mean 20,000 and standard deviation 2,000. All claim amounts are independent of the other claims. Fifty claims occur in each group. Find the probability the total of the 100 claims exceeds 1,530,000.
Answer:
0.0287 = 2.87% probability the total of the 100 claims exceeds 1,530,000.
Step-by-step explanation:
Normal Probability Distribution
Problems of normal distributions can be solved using the z-score formula.
In a set with mean [tex]\mu[/tex] and standard deviation [tex]\sigma[/tex], the z-score of a measure X is given by:
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
The Z-score measures how many standard deviations the measure is from the mean. After finding the Z-score, we look at the z-score table and find the p-value associated with this z-score. This p-value is the probability that the value of the measure is smaller than X, that is, the percentile of X. Subtracting 1 by the p-value, we get the probability that the value of the measure is greater than X.
n instances of a normal variable:
For n instances of a normal variable, the mean is [tex]n\mu[/tex] and the standard deviation is [tex]s = \sigma\sqrt{n}[/tex]
Sum of normal variables:
When two normal variables are added, the mean is the sum of the means, while the standard deviation is the square root of the sum of the variances.
Group A follow a normal distribution with mean 10,000 and standard deviation 1,000. 50 claims of group A.
This means that:
[tex]\mu_A = 10000*50 = 500000[/tex]
[tex]s_A = 1000\sqrt{50} = 7071[/tex]
Group B follow a normal distribution with mean 20,000 and standard deviation 2,000. 50 claims of group B.
This means that:
[tex]\mu_B = 20000*50 = 1000000[/tex]
[tex]s_B = 2000\sqrt{50} = 14142[/tex]
Distribution of the total of the 100 claims:
[tex]\mu = \mu_A + \mu_B = 500000 + 1000000 = 1500000[/tex]
[tex]s = \sqrt{s_A^2+s_B^2} = \sqrt{7071^2+14142^2} = 15811[/tex]
Find the probability the total of the 100 claims exceeds 1,530,000.
This is 1 subtracted by the p-value of Z when X = 1530000. So
[tex]Z = \frac{X - \mu}{\sigma}[/tex]
By the Central Limit Theorem
[tex]Z = \frac{X - \mu}{s}[/tex]
[tex]Z = \frac{1530000 - 1500000}{15811}[/tex]
[tex]Z = 1.9[/tex]
[tex]Z = 1.9[/tex] has a p-value of 0.9713
1 - 0.9713 = 0.0287
0.0287 = 2.87% probability the total of the 100 claims exceeds 1,530,000.
Please Help!!! Whoever helps first and gets it correct gets Brainliest!
Answer:
Step-by-step explanation:
You have three data points. Equation of the line passing through (30,2), (45,2.75), and (60,3.50):
y = 0.5x + 0.5
It takes 0.5 hour to clean up.
