Divers get "the bends" if they come up too fast because gas in their blood expands, forming
bubbles in their blood. If a diver has 0.05 L of gas in his blood under a pressure of 25,000
kPa, then rises to a depth where his blood has a pressure of 5000 kPa, what will be the
volume in liters of gas in his blood?
Answer:
V= 0.25L
Explanation:
At high elevations or high latitudes, some of the water that falls on land does not immediately soak in , run off, evaporate or transpire. where is the water being temporarily stored?
Answer:
The water is stored in ice sheets and as snow
Explanation:
Temperature reduces with an increase in altitudes. The standard laps rate is 6.5°C per 1,000 m gained in elevation
At very high elevations, therefore, the air is usually very cold such that when an elevation of 4,500 meters is reached at the equator, it is possible to observe snowfall and the water remain temporarily stored on the surface of the mountain as ice and snow
Calculate the Kinetic energy of an object with a mass of 15kg while sitting on a shelf that is 20m high.
Kinetic energy is energy of motion. If the object is sitting still, then it has no kinetic energy. It doesn't matter what its mass is, or how high the shelf is.
KE = 0
Two charges, one with a charge of +10.0 x 10-6 C, the other with a charge of -3 x 10-6 C exert a force on each other with a magnitude of 1.7 Newtons on each other. Is this a repulsive or attractive force. What is the separation distance of these charges?
Answer:
b.
Explanation:
Answer:
Attractive force and r = 0.399 m
Explanation:
One charge is positive and the other charge is negative. Opposite charges attract, so there has to be a force that attracts between them.
q1 = 10.0 x 10^-6 C
q2 = -3 x 10^-6 C
F = 1.7 N
Plug those values into Coulomb's Law:
[tex]F = k\frac{q1q2}{r^{2} } \\1.7 = \frac{(9x10^{9})(10.0 x 10^{-6})(-3 x 10^{-6})}{r^{2} }[/tex]
Solve for r
r = 0.399 m
What is so unusual about plutos orbit
It has the lowest eccentricity of any planets orbit
It has an unexpectedly short orbital period
Its orbit is titled by 17 degrees relative to the other eight planets
It's orbital period is exactly twice that of Neptune's
Pressure is ______________ to the force applied.
inversely proportional
directly proportional
not related
Explanation:
inversely proportional
Answer:
directly proportional to force applied
Write a 4-5 sentences paragraph explaining how one of the following organisms with adapt to a new environment (what adaptations would they not need and what ones what they need?What would they eat?)
1. Polar bear moving to a tropical rainforest.
2. Lizard moving to the North Pole
Be Creative!!!!!
No googling! Or no links
Answer:
We're supposed to write a 4-5 paragraph essay for only 6 points...sorry but no
Explanation:
Mention three bodies/organizations that need electricity 24 hours
There are three types of electricity – baseload, dispatchable, and variable
Give Reason.......Why we use life jackets when we go in the water ???
Answer:
so we don't drown and die.
Explanation:
what is the difference between malleability and ductile ??
Please don't post invalid answer please..!!
Please post correct answer please..!!
Answer:
A malleable material is one in which a thin sheet can be easily formed by hammering or rolling. ... In contrast, ductility is the ability of a solid material to deform under tensile stress.
what matches ????????????????
Answer:
1st: Radiation
2nd: Conduction
3rd: Convection
Explanation:
I actually learned this before in school. Yay
differences between mass and weight
Explanation:
Mass : -
1. It is the amount of mass present in an object.
2. SI unit : Kilograms ( kg )
3. Relation between Mass and Weight is W = mg.
Weight : -
1. It is the force with which it is attracted towards the centre of the earth.
2. SI unit : Newton ( N )
3. Relation between Mass and Weight is W = mg.
Mass is a measure of the amount of matter in an object, while weight is a measure of the force of gravity on the object.
Question:
Define Force
Force is push or pull....
thank you
I’ll mark brainliest
When you look into your bathroom mirror, are you upside down
(inverted) or right side up (upright)?
Is this a real or virtual image?
Why?
What is the focal length of a bathroom (flat) mirror?
Answer:
When the image distance is positive, the image is on the same side of the mirror as the object, and it is real and inverted. When the image distance is negative, the image is behind the mirror, so the image is virtual and upright.
Explanation:
What force is keeping the Earth in orbit around the Sun? * HELP FAST PLEASE.
1 point
A Centripetal Force due to gravity.
B Inertia due to gravity.
C Friction due to gravity.
D Magnetic Force due to gravity.
centripetal force acts *
1 point
A in the same direction as tangential speed.
B perpendicular to tangential speed but in the same plane.
C in the direction opposite tangential speed.
D perpendicular to the plane of circular motion.
Answer:
magnetic force due to gravity
Explanation:
nowno that is because that's what the geography teacher taught us back in don't remember but it's true
1. meaning of heat and temperature
2. differences between heat and temperature
Answer:
1.heat is a form of 1.temperature is a form
energy that gives of energy that is used to
sensation of measure hotness or
warmth. or coldness of body.
2.its si unit is 2.its si unit is kelvin.
joule.
A 5000kg elephant steps into a large spring and compresses it from 1m long to 50cm long what is the spring constant of the spring
Answer: 98 kN/m
Explanation:
Given
Mass of elephant [tex]m=5000\ kg[/tex]
Spring compresses from [tex]1\ m\ (100\ cm) \text{to}\ 50\ cm[/tex]
i.e. change in length is [tex]100-50=50\ cm[/tex]
spring force is given by [tex]kx[/tex]
where k=spring constant
x=change in length
The weight of elephant must be equal to the spring force
[tex]\Rightarrow W=kx\\\Rightarrow 5000\times 9.8=k\times 0.5\\\Rightarrow k=98,000\ N/m\ or\ 98\ kN/m[/tex]
Which of the following is another name for a convex lans?
O Diverging liens
3. Converging lens
O c Shrinking lans
OD Security lans
Answer:
3. converging lens
Explanation:
When the rays of light coming parallel to principle axis after refraction through the lens passes through a point called focus, since it converge all the ray at one point, that is why it is said to be converging lens.
Consider two spinning tops with different radii. Both have the same linear instantaneous velocities at their edges. Which top has a smaller angular velocity? the top with the smaller radius because the radius of curvature is inversely proportional to the angular velocity the top with the smaller radius because the radius of curvature is directly proportional to the angular velocity the top with the larger radius because the radius of curvature is inversely proportional to the angular velocity The top with the larger radius because the radius of curvature is directly proportional to the angular velocity
Answer:
the top with the largest radius because the radius of curvature is inversely proportional to the angular velocity
Explanation:
Angular and linear velocity are related
v = w r
w = v / r
Therefore, if the linear velocity of the two is the same, the one with the smaller radius has the higher angular velocity.
When reviewing the answers, the correct one is:
the top with the largest radius because the radius of curvature is inversely proportional to the angular velocity
The top that has a smaller angular velocity is D. the top with the larger radius because the radius of curvature is directly proportional to the angular velocity.
It should be noted that the top that has a higher angular velocity will be the top with the smaller radius because the radius of curvature is inversely proportional to the angular velocity
On the other hand, since the two spinning tops have different radii while both have the same linear instantaneous velocities at their edges, then the top that has a smaller angular velocity is the top with the larger radius because the radius of curvature is directly proportional to the angular velocity.
Read related link on:
https://brainly.com/question/16903986
An electromagnetic wave with frequency 65.0Hz travels in an insulating magnetic material that has dielectric constant 3.64 and relative permeability 5.18 at this frequency. The electric field has amplitude 7.20×10−3V/m. What is the wavelength of the wave?
Answer:
The wavelength of the wave is [tex]1.06\times10^6 m[/tex]
Explanation:
Lets calculate
We know an electromagnetic wave is propagating through an insulating magnetic material of dielectric constant K and relative permeability [tex]K_m[/tex] ,then the speed of the wave in this dielectric medium is [tex]\nu[/tex] is less than the speed of the light c and is given by a relation
[tex]\nu=\frac{c}{\sqrt{KK_m} }[/tex] --------- 1
In case the electromagnetic wave propagating through the insulating magnetic material , the amplitudes of electric and magnetic fields are related as -
[tex]E_m_a_x= \nu B_m_a_x[/tex]
The magnitude of the 'time averaged value' of the pointing vector is called the intensity of the wave and is given by a relation
[tex]I = S_a_v[/tex]
[tex]\frac{E_m_a_xB_m_a_x}{2K_m\mu0}[/tex]----------- 3
now , we will find the speed of the propagation of an electromagnetic wave by using equation 1
[tex]\nu=\frac{c}{\sqrt{KK_m} }[/tex]
Putting the values ,
=[tex]\nu= \frac{3.00\times10^8}{\sqrt{(3.64)(5.18)} }[/tex]
=[tex]0.6908\times10^8m/s[/tex]
= [tex]6.91\times10^7m/s[/tex]
Now , using this above solution , we will find the wavelength of the wave -
[tex]\lambda=\frac{\nu}{f}[/tex]
Putting the values from above equations -
[tex]\frac{6.91\times10^7m/s}{65.0Hz}[/tex]
[tex]\lambda= 1.06\times10^6 m[/tex]
Hence , the answer is [tex]\lambda= 1.06\times10^6 m[/tex]
A 5kg particle moving at a speed of 10m/s to the right makes an elastic collision with a wall and rebounds backward calculate the magnitude of the impulse of the body
Answer:
The magnitude of the impulse experienced by the particle is 100 kg.m/s.
Explanation:
Given;
mass of the particle, m = 5 kg
initial velocity of the particle, v₁ = 10 m/s
assuming the particle rebounds with same velocity backwards, v₂ = - 10 m/s
The impulse experienced by the particle is the change in linear momentum;
J = ΔP = mv₁ - mv₂
J = m(v₁ - v₂)
J = 5 (10 - (-10))
J = 5 (10 + 10)
J = 5(20)
J = 100 kg.m/s
Therefore, the magnitude of the impulse experienced by the particle is 100 kg.m/s.
AM and FM stand for two different processes that are used to code voices and music for transmission. What does AM stand for? 1. Amplitude Modulation 2. Amplitude Mediation A
Answer:
1. Amplitude Modulation
Explanation:
AM is an acronym for Amplitude Modulation and it's refers to a process that is typically used for coding sounds such as voices and music for transmission from one point to another.
On the other hand, FM is an acronym for frequency modulation used for the propagation and transmission of sound waves.
Basically, the two forms of modulation are used for broadcasting in radio transmission.
Electromagnetic waves is a propagating medium used in all communications device to transmit data (messages) from the device of the sender to the device of the receiver.
Generally, the most commonly used electromagnetic wave technology in telecommunications is radio waves.
Radio waves can be defined as an electromagnetic wave that has its frequency ranging from 30 GHz to 300 GHz and its wavelength between 1mm and 3000m. Therefore, radio waves are a series of repetitive valleys and peaks that are typically characterized of having the longest wavelength in the electromagnetic spectrum.
An electron and a proton are both released from rest, midway between the plates of a charged parallel-plate capacitor. The only force on each of the two particles is the force from the uniform electric field due to the capacitor. Each particle accelerates until striking one of the plates of the capacitor. (There is no gravity in this problem and we ignore the small force between the electron and the proton.) How do the final kinetic energies and final speeds (just before striking a plate) compare
Answer:
Explanation:
Let the potential difference between the middle point and one of the plate be ΔV .
electric potential energy will be lost and it will be converted into kinetic energy .
Electrical potential energy lost = Vq , where q is charge on charge particle .
For proton
ΔV× q = 1/2 M V² ( kinetic energy of proton )
where M is mass and V be final velocity of proton .
For electron
ΔV× q = 1/2 m v² ( kinetic energy of electron )
where m is mass and v be final velocity of electron . Charges on proton and electron are same in magnitude .
As LHS of both the equation are same , RHS will also be same . That means the kinetic energy of both proton and electron will be same
1/2 M V² = 1/2 m v²
(V / v )² = ( m / M )
(V / v ) = √ ( m / M )
In other words , their velocities are inversely proportional to square root of their masses .
bit.♠ly/3♠vhMu♠vJ remove symbols before searching or it wont work, there was a bug stoping me from attaching the image so there it is
Answer:
k and...
Explanation:
Answer:
no thank you.
explanation: Do not want to
A skier traveling downhill has this type of energy
Answer:
potential energy
Explanation:
Can someone please help me
Answer:
I don't know the answer but I needed the answer to that on a quiz and I downloaded sorcatic and it brings u to an app or website with the answer I hope this helps if you can't find the app than just tell me
2) What are the two main types of waves?
Answer:
The two types of waves are longitudinal and transverse
Explanation:
hope it helped! and i hope its correct
I neeed help im so comfused Points Possible: 1, Points Correct: 0 Which group of numbers is listed from greatest to least? -3, -1, 0, 2, 7 9, 7, 6, -5, -4 8, -6, 5, -4, 1 -3, -4, -7, -8, -9
The groups aren't well formatted ;
The groups are ;
(-3, -1, 0, 2, 7) ; (9, 7, 6, -5, -4) ; (8, -6, 5, -4, 1) ; (-3, -4, -7, -8, -9)
Answer:
(-3, -4, -7, -8, -9)
Explanation:
Given the following group of numbers :
Evaluating each group of values for which is correctly arranged from greatest to least.
(-3, -1, 0, 2, 7) : - 1 is greater than - 3 (the group isn't arranged from greatest to least)
(9, 7, 6, -5, -4) : - 4 is greater than - 5 ; hence, the group isn't arranged from greatest to least
(8, -6, 5, -4, 1) : 5 is greater than - 6 ; hence, the group isn't arranged from greatest to least
(-3, -4, -7, -8, -9) ; the group of numbers here is arranged from greatest to least ;
(-3 > -4 > -7 > -8 > -9) ; hence, the correct group
Question 16 (1 point)
Light travels through a material at a speed of 4.3 x 108 m/s. What is the index of
refraction for the material?
Your Answer:
Answer
units
Answer:
η = 0.7
Explanation:
The refractive index of the material can be calculated by using the following formula:
[tex]\eta = \frac{c}{v}\\[/tex]
where,
η = refractive index of the material = ?
c = speedof light in vaccuum = 3 x 10⁸ m/s
v = speed of light in this material = 4.3 x 10⁸ m/s
Therefore,
[tex]\eta = \frac{3\ x\ 10^8\ m/s}{4.3\ x\ 10^8\ m/s}[/tex]
η = 0.7
A pumpkin is thrown horizontally off of a building at a speed of 2.5 — and travels a horizontal distance of
12 m before hitting the ground. We can ignore air resistance.
What is the vertical velocity when it hits the ground
Answer:
Explanation:
This is a missile throwing exercise, let's find the distance
x = v₀ₓ / t
t = v₀ₓ / x
let's calculate
t = 2.5 / 12
t = 0.2083 s
as time is a scalar this is the same value for descends to the ground
y = v_{oy} t - 1/2 g t²
we calculate
v_y = 0 - 9.8 0,2083
v_y = - 2.04 m / s
the negative sign indicates that the speed is down
A pumpkin is thrown horizontally off of a building at a speed of 2.5 m/s and travels a horizontal distance of 12 m before hitting the ground. We can ignore air resistance.
What is the pumpkin's vertical velocity when it hits the ground?
Answer: -47.04
