the sebaceous glands produce sebum, a material that:

When an electrical current is applied to an aqueous solution of lithium sulfide, hydrogen gas will be produced at the cathode and sulfur will be produced at the anode.

At the cathode, positively charged hydrogen ions (H+) gain electrons and are reduced to hydrogen gas (H2).2H+ + 2e- → H2

At the anode, negatively charged sulfide ions (S2-) lose electrons and are oxidized to form elemental sulfur (S).

S2- → S + 2e-

It's worth noting that lithium ions (Li+) will also be present in the solution but they will not be produced at either the anode or cathode.

To know more about electrical visit-

https://brainly.com/question/33513737

#SPJ11

Agar is a complex polysaccharide derived from a seaweed.

Agar is a jelly-like substance that is used to culture bacteria and other microbes in the laboratory. It is a non-nutrient material that is used to provide a surface for the bacteria to grow on.

Agar is also used as a gelling agent in foods such as jams and jellies, as well as in the preparation of solid media for microbiological applications.

The structure of agar is composed of repeating units of galactose and 3,6-anhydrogalactose, linked together by glycosidic bonds.

It is a linear polymer of approximately 150 kDa.

Agar is a hydrophilic molecule, meaning that it attracts water molecules, which contributes to its ability to form gels.

learn more about complex polysaccharide on

https://brainly.com/question/33536825

#SPJ11

The Keq (Equilibrium constant) of the reaction 14C (l) ⇌ 4A (g) + 6B (s) is 6.64.

Chemical equilibrium refers to the state of a system in which the concentration of the reactant and the concentration of the products do not change with time, and the system does not display any further change in properties.

It is the state of a reversible reaction where the rate of the forward reaction equals the rate of the reverse reaction. While a reaction is in equilibrium the concentration of the reactants and products are constant.

The given reaction can be represented as:

2A (g) + 3B (s) ⇌ 7C (l)

the stoichiometric coefficients are 2, 3, and 7 for A, B, and C, respectively.

Keq = ([C]⁷) / ([A]² [B]³)

To find the Keq of the second reaction, we can rearrange the equation and substitute the stoichiometric coefficients:

Keq' = ([A]⁴  [B]⁶) / [C]¹⁴

Keq' = (0.38² . 0.38³) / 0.38⁷

Keq' = 0.38⁻² = 6.64

Learn more about Chemical equilibrium, here:

https://brainly.com/question/4289021

#SPJ4

We can see here that to open a text file in C++ and input its contents into an array, you can follow these steps:

A text file is a type of computer file that stores plain text data. It is a simple and common format for storing human-readable information.

After these steps, the dataArray will contain the lines of the text file, with each line stored as a string element in the vector.

You can then use the contents of the array as needed, such as accessing individual lines or performing further processing on the data.

Learn more about text file on https://brainly.com/question/13567290

#SPJ4

The most controversial form of alternative energy after nuclear power is: Fossil fuel.

Energy is the capability of doing work, and it comes in various forms. For example, mechanical energy is a form of energy that arises from the motion or location of an object, while thermal energy is the energy associated with the movement of atoms or molecules within a substance.

There are two types of energy: kinetic energy and potential energy.

Power refers to the amount of energy used in a given time period. In other words, power is the rate at which work is done. Energy is expressed in joules, while power is expressed in watts.

Power is calculated by dividing the amount of energy used by the amount of time it took to use it.

learn more about alternative energy  on

https://brainly.com/question/27263084

#SPJ11

The term used to denote the concentration of electrolytes in a given volume is "molarity".

Molarity-

Molarity is the number of moles of solute dissolved in one liter of the solution. Molarity is the most widely used concentration metric in chemistry, and it is frequently denoted by "M." It denotes the amount of solute in moles per liter of solution.

A solution's molarity can be calculated using the following formula:

Molarity = moles of solute / liters of solution

Molarity is often used to express the concentration of a solution's electrolytes because electrolytes break into ions when dissolved in a solvent, allowing for electrical conductivity.

Molarity can be used in other applications, such as stoichiometry, which involves determining how much of one compound is required to react completely with another.

Molarity is a useful tool for solving problems that involve chemical reactions since the number of moles of a substance is frequently used to establish reaction ratios, limit reactants, and determine the theoretical yield.

Learn more about the molarity from the given link-

https://brainly.com/question/30404105

#SPJ11

The compound with the formula (NH4)2S is called ammonium sulfide. It is formed by the combination of ammonium ions (NH4+) and sulfide ions (S2-).

Ammonium sulfide is an inorganic compound commonly used in laboratory settings and has a strong odor resembling rotten eggs due to the release of hydrogen sulfide gas.

A compound is a substance composed of two or more elements combined in a fixed proportion by mass. In chemical terms, a compound refers to a substance consisting of two or more distinct elements that combine chemically, resulting in a substance with a distinct and constant composition.

Ammonium sulfide is a type of salt. It is produced when a weak base, ammonium hydroxide, and hydrogen sulfide gas are combined in a solution. It is used in the manufacturing of photographic films and in the production of dyes and other chemicals. It is also used in the leather industry to remove hair from animal hides, in addition to some other applications.

Learn more about Aluminium sulphide:

brainly.com/question/20037924

#SPJ11

The solution that contains the most solute particles per liter is 1 M Mg(NO₃)₂. The correct answer is option (b).


The solute particles in a solution can be ions or molecules. The number of solute particles per unit of volume is a measure of concentration and is expressed in mol/L or M. In the given options, 1 M KBr, 1 M Mg(NO₃)₂, 4 M ethanol, and 4 M acetic acid are given.  

The concentration of the solutions can be calculated using the formula:

Molarity (M) = Number of moles of solute / Volume of solution in liters

The number of solute particles per unit of volume is directly proportional to molarity. The solution with the highest molarity will have the most solute particles per liter.  

Therefore, the solution that contains the most solute particles per liter is 1 M Mg(NO₃)₂. The number of solute particles per liter of 1 M Mg(NO₃)₂ will be 3 times greater than 1 M KBr, and 2 times greater than 4 M ethanol or 4 M acetic acid.

Thus, the solution that contains the most solute particles per liter is 1 M Mg(NO₃)₂. The correct answer is option (b).

Learn more about molarity here:

https://brainly.com/question/2817451

#SPJ11

The reducing agent in the following reaction 2Na + 2H₂O → 2NaOH + H₂ is Na. The correct answer is option A.

Oxidation-reduction reactions or redox reactions are chemical reactions that involve the transfer of electrons between two species. In such reactions, the reducing agent is the one that is oxidized, i.e., it loses electrons. On the other hand, the oxidizing agent is the one that is reduced, i.e., it gains electrons. The reducing agent reduces the oxidizing agent by donating electrons to it.

In this reaction, sodium (Na) is oxidized, and hence acts as the reducing agent. Na loses an electron and becomes positively charged Na+ ion, which then combines with hydroxide (OH-) ion to form sodium hydroxide (NaOH). The hydrogen ion (H+) produced by the dissociation of water is reduced to hydrogen gas (H₂) by accepting the electron donated by sodium.

Thus, the reducing agent in the reaction 2Na + 2H₂O → 2NaOH + H₂ is Na. The correct answer is option A.

Learn more about redox reactions here:

https://brainly.com/question/13293425

#SPJ11

The simplest possible hydrocarbon is H₂ due to its absence of carbon atoms.

Option (a) is correct.

Hydrocarbons are organic compounds consisting of carbon and hydrogen atoms. Among the options given, H₂ represents a diatomic molecule of hydrogen, which does not contain any carbon atoms. It is the simplest hydrocarbon in terms of carbon atom count.

Hydrocarbons are typically classified based on the number of carbon atoms they contain. The hydrocarbon HC=CH is ethene, which has two carbon atoms. CH₄ is methane, consisting of one carbon atom bonded to four hydrogen atoms. H₂C=CH₂ does not represent a valid hydrocarbon formula.

H₂ , however, is a diatomic molecule composed of two hydrogen atoms. While it does not fit the traditional definition of a hydrocarbon due to the absence of carbon, it is the simplest possible arrangement of atoms within the context of hydrocarbons.

In summary, among the options provided, H₂ is the simplest possible hydrocarbon due to its absence of carbon atoms. So, the correct option is (a).

To learn more about hydrocarbon here

https://brainly.com/question/30666184

#SPJ4

Complete question is:

Which of the following is the simplest possible hydrocarbon?

a) H₂

b) HC=CH

c) CH₄

d) H₂C=CH₂

The amount of energy released when 1.00 mol of SO3 is produced is -395 kJ/mol.

Given that 1.00 mol of sulfur trioxide is produced, we have to find out the amount of energy released during the reaction.

The reaction for the production of sulfur trioxide is given as;2SO2(g) + O2(g) ⟶ 2SO3(g)The balanced equation shows that the reaction produces 2 mol of SO3 for every 2 mol of SO2 and 1 mol of O2, which means the reaction produces 2 mol of SO3 for every 3 mol of O2 reacted.

So, 1.00 mol of SO3 is produced by reacting (3/2) × 1.00 mol of O2.

The energy released during this reaction is given by the enthalpy change of the reaction, which is -395 kJ/mol, and it is negative because the reaction is exothermic and releases energy.

The enthalpy change (-395 kJ/mol) corresponds to the reaction producing 2 mol of SO3.

Therefore, to find the amount of energy released when 1.00 mol of SO3 is produced, we need to calculate the amount of energy released when 2 mol of SO3 is produced and divide it by 2.

This is done to convert the energy released to per 1.00 mol of SO3 produced.

The amount of energy released when 2 mol of SO3 is produced = 2 × (-395 kJ/mol) = -790 kJ/mol

The amount of energy released when 1.00 mol of SO3 is produced = (-790 kJ/mol) ÷ 2= -395 kJ/mol

Therefore, the amount of energy released when 1.00 mol of SO3 is produced is -395 kJ/mol.

learn more about amount of energy on

https://brainly.com/question/2003548

#SPJ11

The mass of 12.82 moles of lithium (Li) atoms is 88.89 g.

The molar mass of Lithium (Li) is 6.94 g/mol. Therefore, the mass of 12.82 moles of lithium (Li) atoms can be calculated as follows:

The number of moles of lithium (Li) = 12.82 mol

Molar mass of Lithium (Li) = 6.94 g/mol

We know that the mass of one mole of an element is equal to its atomic or molecular mass in grams.Therefore, the mass of 1 mole of Li atoms is equal to its molar mass which is 6.94 g/mol.

Then the mass of 12.82 moles of Li atoms can be found using mole to mass conversion as follows:

Mass = Number of moles × Molar mass

= 12.82 mol × 6.94 g/mol

= 88.89 g.

Learn more about molar mass -

brainly.com/question/837939

#SPJ11

Explanation:

cooked rice

nutrient

carbohydrate.

Boiler eggs

nutrient

Protein.

Based on the information provided, the principle of the conservation of mass did apply in this example.

The principle of the conservation of mass states that mass is neither created nor destroyed in a chemical reaction. In other words, the total mass of the reactants should be equal to the total mass of the products.

In the given scenario, Nicole measured 25 g of sodium carbonate and 10 mL of vinegar, which can be considered the reactants. The total mass of the reactants and the beaker was determined to be 100 g. After mixing the reactants, bubbling and a white residue were observed, and the total mass became 98 g.

To analyze the conservation of mass, we need to consider the mass of the products formed. The bubbling and white residue suggest a chemical reaction occurred, likely resulting in the formation of a gas and a solid product. Although the exact reaction and products are not specified, it is evident that some change took place.

The total mass decreasing from 100 g to 98 g indicates that the mass of the products is less than the mass of the reactants and the beaker. This might be due to the formation of a gas that escaped from the reaction mixture.

While the total mass decreased, it is important to note that mass was not created or destroyed. The lost mass in the form of the escaping gas can be accounted for if it is considered separately.

For more such questions conservation visit:

https://brainly.com/question/19162396

#SPJ8

Answer:

influence of a business invironment

Hexane would have the fragment 57 in its mass spectrum and the correct option is option C.

A mass spectrum is  the m/z ratios of the ions present in a sample plotted against their intensities. Each peak in a mass spectrum indicates a component of unique m/z in the sample, and heights of the peaks give information about the relative abundance of the various components in the sample.

This fragment could arise from the loss of a methyl group (CH₃) from the hexane molecule, resulting in the fragment with the formula C₅H₁₁. The m/z value represents the ratio of the fragment's mass to its charge, so it does not necessarily correspond to the exact mass of the fragment.

Thus, the ideal selection is option C.

Learn more about Mass spectrum, here:

https://brainly.com/question/31040502

#SPJ4

The chemical formula for sodium benzoate is NaC₇H₅O₂.

Sodium benzoate is a common food preservative that is used to extend the shelf life of certain foods by preventing the growth of bacteria, yeast, and mold. It is a salt derived from benzoic acid and is typically found in acidic foods such as carbonated drinks, fruit juices, and pickles. The chemical formula for sodium benzoate is NaC₇H₅O₂.

The formula indicates that sodium benzoate contains one sodium ion (Na⁺) and one benzoate ion (C₇H₅O₂⁻). The sodium ion has a +1 charge, while the benzoate ion has a -1 charge, which balances out the compound's charge. Sodium benzoate is considered a safe and effective food preservative, as it has a long history of use and has been extensively studied for its safety.

Learn more about acidic foods here:

https://brainly.com/question/29489173

#SPJ11

To prepare pentylamine from 1-hexanol, we need to follow the following steps:

Step 1: Dehydration of 1-hexanol using sulfuric acid[SO4H2]H2SO4[latex]\rightarrow[/latex]C6H14O (1-hexanol) [latex]\rightarrow[/latex]C6H12 (1-hexene) + H2OThis reaction involves the removal of the hydroxyl group from 1-hexanol in the presence of concentrated sulfuric acid (H2SO4) to produce 1-hexene.

Step 2: Hydrogenation of 1-hexene in the presence of Lindlar catalystC6H12 (1-hexene) + H2 (hydrogen) [latex]\rightarrow[/latex]C6H14 (hexane)C6H14 (hexane) + NH3 (ammonia) [latex]\rightarrow[/latex]C5H11NH2 (pentylamine)

The hydrogenation of 1-hexene is done in the presence of Lindlar's catalyst, which is a poisoned catalyst that reduces the degree of hydrogenation to an alkene. This reaction converts 1-hexene to hexane, which is further treated with ammonia to yield pentylamine.

The reaction between hexane and ammonia forms pentylamine as shown below:

C6H14 (hexane) + NH3 (ammonia) [latex]\rightarrow[/latex]C5H11NH2 (pentylamine)

Hence, the overall reaction can be summarized as follows:

1-hexanol [latex]\xrightarrow{\text{Dehydration}}[/latex] 1-hexene [latex]\xrightarrow{\text{Hydrogenation}}[/latex] hexane [latex]\xrightarrow{\text{Ammonolysis}}[/latex]

pentylamine150 can be used to denote the temperature in degrees Celsius or a number of other contexts.

Learn more about pentylamine on:

https://brainly.com/question/33713617

#SPJ11

Temperature and fluidity of the cell membrane are directly proportional to each other. As temperature increases, the fluidity of the cell membrane also increases.

The plasma membrane of the cell is a thin, flexible layer that encloses all cells, and it is also known as the cell membrane. It serves as a barrier to separate the cell's contents from the external environment. Fluidity of the cell membrane refers to the movement of lipid molecules within the cell membrane. Temperature and fluidity of the cell membrane are directly proportional to each other.

As temperature increases, the fluidity of the cell membrane also increases, and vice versa. The fluidity of the cell membrane is essential for the functioning of membrane-bound proteins, which play an essential role in various cellular activities, such as cell signaling, transport of molecules, and cell recognition. Therefore, temperature directly affects the fluidity of the cell membrane, which can impact cellular activities and the survival of the organism.

Learn more about cell membrane here:

https://brainly.com/question/13049297

#SPJ11

The process used to mine salts by filling shallow ponds with seawater is known as solar salt production.

The process of mining salts by filling shallow ponds with seawater is called solar salt production. It is a method commonly used to extract salt from seawater on a large scale. The process takes advantage of the natural evaporation of water under the sun, leaving behind concentrated salt crystals that can be collected and processed.

The process begins by selecting suitable coastal areas or salt flats, typically in arid or semi-arid regions with access to the sea. These areas are usually flat and have low rainfall, facilitating the evaporation process. Shallow ponds or basins, also known as salt pans or evaporation ponds, are constructed to contain the seawater.

Seawater is then pumped into these ponds or is allowed to flow in naturally during high tide. The ponds are designed to maximize the exposure of seawater to sunlight and heat. The sun's energy drives the evaporation process, causing the water to gradually evaporate, leaving behind concentrated brine solutions.

Over time, as the water continues to evaporate, the salt concentration in the remaining brine increases. The concentrated brine, also known as bittern, becomes supersaturated with dissolved salts, including sodium chloride and other minerals. As the saturation point is reached, salt crystals begin to precipitate and form salt beds at the bottom of the ponds.

Learn more about evaporation here:

https://brainly.com/question/33571997

#SPJ11

The most likely place where an exoenzyme participates in a chemical reaction is outside of the cell.

Option E is correct.

Exoenzymes are enzymes that are synthesized and secreted by cells to act on substrates outside of the cell that produced them. These enzymes are typically involved in extracellular processes, such as breaking down large molecules into smaller ones, digesting nutrients, or facilitating interactions with the environment.

Therefore, the correct answer is E. outside of the cell.

Learn more about Enzymes:

brainly.com/question/30667574

#SPJ11

Mercury is a dense and small planet. It orbits closer to the sun than any other planet in the solar system, with an orbital distance of 36 million miles.

As a result of its proximity to the sun, mercury has a surface temperature range of -280 degrees Fahrenheit to 800 degrees Fahrenheit, making it the planet with the greatest temperature extremes. These two properties, size, and density, indicate that Mercury is differentiated.

Mercury's small size implies that it has a relatively small volume. However, the planet's high density implies that the materials that make up the planet are compressed. The compression caused the materials to rearrange according to density, with the most dense materials at the center.

As a result, Mercury has a core made up of iron and nickel, as well as a mantle composed of silicates that surround the core.In conclusion, the properties of density and small size imply that Mercury is differentiated.

To know more about Mercury visit-

https://brainly.com/question/19940784

#SPJ11

The chemical equation for the reaction between hydrogen gas and nitrogen to form ammonia is 3H₂ + N₂ → 2NH₃.

To balance the equation, we need to ensure that the same number of atoms of each element is present on both sides of the equation. In this case, we have three hydrogen atoms on the left side and six hydrogen atoms on the right side.
To balance the hydrogen atoms, we can place a coefficient of 2 in front of the hydrogen gas:

3H₂ + N₂ → 2NH₃

Now, we have six hydrogen atoms on both sides. Next, we need to balance the nitrogen atoms. We have one nitrogen molecule on the left side and two nitrogen atoms in total on the right side.

To balance the nitrogen atoms, we can place a coefficient of 2 in front of the nitrogen molecule. 3H₂ + 2N₂ → 2NH₃

Now, we have six hydrogen atoms and four nitrogen atoms on both sides of the equation. The equation is balanced.

Learn more about balanced chemical equations here:

brainly.com/question/28294176

#SPJ11

The well-known ports range from 0 to 1023. These ports are reserved for specific services and protocols, and they are commonly used by system processes or by programs executed by privileged users.

Here is a breakdown of some commonly known ports within the well-known port range:

20: FTP Data

21: FTP Control

22: SSH (Secure Shell)

23: Telnet

25: SMTP (Simple Mail Transfer Protocol)

53: DNS (Domain Name System)

80: HTTP (Hypertext Transfer Protocol)

110: POP3 (Post Office Protocol version 3)

143: IMAP (Internet Message Access Protocol)

443: HTTPS (HTTP Secure)

465: SMTP over SSL/TLS

587: SMTP Submission

993: IMAPS (IMAP over SSL/TLS)

995: POP3S (POP3 over SSL/TLS)

These are just a few examples, and there are many other services and protocols assigned to specific well-known ports within the range of 0 to 1023.

Learn more about Range:

brainly.com/question/29746356

#SPJ11

The modified formula for the multiplicity of the two-dimensional ideal gas is Ω = (1/N!) * (Aⁿ / hⁿ) * (2πm/ħ²)ⁿ/²

(a) In a similar manner to the three-dimensional ideal gas, we can use the formula for the multiplicity (Ω) of a two-dimensional ideal gas given by the equation:

Ω = (1/N!) * (Vⁿ / h²ⁿ)) * (4πm/2πħ²)ⁿ/²

However, since the gas is now in a two-dimensional universe, we need to modify this equation to account for the area (A) instead of volume (V). The modified formula for the multiplicity of the two-dimensional ideal gas is:

Ω = (1/N!) * (Aⁿ / hⁿ) * (2πm/ħ²)ⁿ/²

(b) The expression for the entropy (S) of the two-dimensional ideal gas can be obtained by using the relationship between entropy and multiplicity:

S = k * ln(Ω)

Substituting the modified formula for Ω derived in part (a), we get:

S = k * ln[(1/N!) * (Aⁿ / hⁿ)) * (2πm/ħ²)ⁿ/²]

S = k * [ln(Aⁿ) - N * ln(h) + (N/2) * ln(2πm/ħ²) - ln(N!)]

(c) To determine the temperature (T), pressure (P), and chemical potential (μ), we need to take partial derivatives of entropy (S) with respect to energy (U), area (A), and number of particles (N).

Temperature (T):

(∂S/∂U) = 1/T

Pressure (P):

(∂S/∂A) = P/T

Chemical potential (μ):

(∂S/∂N) = -μ/T

To simplify the expressions further, it is necessary to evaluate the logarithmic term and apply Stirling's approximation for the factorial term (N!). The resulting expressions may be complex and involve various constants and logarithms.

It is important to note that since we are in a two-dimensional universe, the concept of pressure is defined as force per unit length instead of force per unit area as in three dimensions. Additionally, the chemical potential reflects the behavior of the gas in two dimensions.

The specific simplification and interpretation of the results would require further mathematical calculations and analysis based on the given expressions and the specific values of U, A, and N.

Learn more about Ideal gas:

brainly.com/question/20348074

#SPJ11

The substance that is NOT in its standard state among the options provided is e. H (hydrogen).

Among the given options, hydrogen (H) is the substance that is not in its standard state, as it typically exists as a diatomic molecule (H₂) rather than as individual hydrogen atoms.

In its standard state, hydrogen exists as a diatomic molecule, H₂. However, the option e. H suggests that hydrogen is not in its standard state and likely refers to atomic hydrogen (H), which exists as a highly reactive and unstable species. In its standard state, hydrogen is found as H₂, not as individual hydrogen atoms.

Learn more about Standard State on:

https://brainly.com/question/14052194

#SPJ4

Complete Question:

Identify a substance that is NOT in its standard state

a. Ca

b. H₂

c. Li

d. Ne

e. H

The element that has two electrons in its 4d sublevel is Ruthenium (Ru) with the atomic number of 44.

Ruthenium (Ru) is a rare transition metal from the platinum group of the periodic table. It is a hard, brittle, silvery-white metal with a slight bluish tint and an atomic number of 44. Ruthenium is one of the densest materials, and it has four stable isotopes. It is commonly found in ores containing other platinum metals.

Ruthenium is frequently used in electrical contacts due to its hardness, wear resistance, and low contact resistance. It is also utilized in some alloys with platinum and other platinum-group metals to make wear-resistant electrical contacts. Ruthenium can also be used as a catalyst in some chemical reactions. It can oxidize and reduce many molecules, making it useful in various oxidation-reduction reactions.

To know more about atomic visit-

https://brainly.com/question/30898688

#SPJ11

The pH of the base solution after adding the [tex]HNO_3[/tex] solution is approximately 2.14.

To calculate the pH of the base solution after adding the [tex]HNO_3[/tex] solution, we need to consider the acid-base reaction between methylamine ([tex]CH_3NH_2[/tex]) and nitric acid ([tex]HNO_3[/tex]). Methylamine acts as a base, while nitric acid is an acid. The reaction can be represented as follows:

[tex]CH_3NH_2 + HNO_3 \rightarrow CH_3NH_3^+ + NO_3^-[/tex]

Since methylamine is a weak base, we need to consider its reaction with water as well:

[tex]CH_3NH_2 + HNO_3 \rightarrow CH_3NH_3^+ + NO_3^-[/tex]

To solve this problem, we'll use the Henderson-Hasselbalch equation, which relates the pH of a solution to the pKa and the ratio of the conjugate acid and base forms. The pKa of methylamine is given as 3.36.

1. Calculate the initial moles of methylamine in the base solution:

Initial moles of methylamine = volume of solution (L) * molarity of methylamine (mol/L)

Initial moles of methylamine = 0.1323 L * 0.7100 mol/L

Initial moles of methylamine = 0.093963 mol

2. Calculate the moles of nitric acid added to the solution:

Moles of nitric acid = volume of solution (L) * molarity of nitric acid (mol/L)

Moles of nitric acid = 0.1114 L * 0.7500 mol/L

Moles of nitric acid = 0.08355 mol

3. Calculate the moles of methylamine remaining after the reaction:

Moles of methylamine remaining = Initial moles of methylamine - Moles of nitric acid added

Moles of methylamine remaining = 0.093963 mol - 0.08355 mol

Moles of methylamine remaining = 0.010413 mol

4. Calculate the concentration of the conjugate acid ([tex]CH_3NH_3^+[/tex]) formed:

The concentration of [tex]CH_3NH_3^+[/tex] = moles of methylamine remaining / volume of solution (L)

Concentration of [tex]CH_3NH_3^+[/tex] = 0.010413 mol / (0.1323 L + 0.1114 L)

The concentration of [tex]CH_3NH_3^+[/tex] = 0.010413 mol / 0.2437 L

Concentration of [tex]CH_3NH_3^+[/tex] = 0.0427 M

5. Use the Henderson-Hasselbalch equation to calculate the pH of the base solution:

pH = pKa + log10 ([concentration of [tex]CH_3NH_3^+[/tex]] / [concentration of [tex]CH_3NH_2[/tex]])

Since the pKa of methylamine is given as 3.36:

pH = 3.36 + log10 (0.0427 M / 0.7100 M)

pH = 3.36 + log10 (0.0601)

pH = 3.36 + (-1.22)

pH = 2.14

Therefore, the pH of the base solution after adding the [tex]HNO_3[/tex] solution is approximately 2.14.

Learn more about acid-base reactions at:

https://brainly.com/question/10467673

#SPJ4

The systematic name for the compound Al(NO₃)₃ is Aluminum nitrate.

Aluminum (Al) has a valency of +3, whereas Nitrate (NO₃) has a valency of -1.

Aluminum nitrate is a salt composed of aluminum and nitrate ions with the chemical formula Al(NO₃)₃.

Al(NO₃)₃ is an ionic compound that is highly soluble in water, making it an excellent starting material for the preparation of other salts.

Aluminum nitrate can be obtained by dissolving aluminum hydroxide in nitric acid.

A white crystalline solid is formed when the solution is concentrated by evaporation.

The crystals are hygroscopic and dissolve in water to produce a colorless solution.\

learn more about  Aluminum nitrate on

https://brainly.com/question/9317790

#SPJ11