The tools shown in the diagram are used for gardening Each tool is made up
of two levers that are attached to each other. The handles are the input arms,
and the cutting blades are the output armo
Hand shears
Lopper
Which tool has a greater mechanical advantage, and why?
A. The lopper, because the input work is the same as the output work
B. The hand shears, because their shorter handles transfer force
more quickly to the cutting blade
C. The hand shears, because you can apply less total force to the
handles with one hand
D. The lopper, because its longer handles can produce more output
force with less input force

The electronegativity increases across the period and decreases down the group. Thus, option B is correct.

Electronegativity can be defined as the tendency of an atom to gain or attract an electron. The electronegativity has been dependent on the size of the atom, as well as the atomic number and valence electrons.

The atom with the requirement of a less number of atoms to complete its octet can easily gain the electron and thereby have high electronegativity. The atomic size also plays a role in the electronegativity of the atom.

The atom with a bigger size has the lesser force of attraction from the nucleus and thus has difficulty attracting the electron, however, the smaller size atom can easily attract the electron with the attraction force from the nucleus.

Thus, the elements with smaller sizes and a high number of valence electrons are more electronegative. In the periodic table, on moving from left to right the valence electrons increase, thus the electronegativity increases.

On moving down the group, the element size increase, thus the electronegativity decreases down the group.

The electronegativity increases across the period and decreases down the group. Thus, option B is correct.

For more information about electronegativity, refer to the link:

https://brainly.com/question/2060520

Answer:

Mg3N2

Explanation:

it would be magnesium as it would loss to electron so it would have 10 electron. you can see in the picture above .

hope this helps :)

The question is incomplete, the complete question is:

A chemist measures the amount of iodine solid produced during an experiment. He finds that 8.31 g of iodine solid is produced. Calculate the number of moles of iodine solid produced. Round your answer to the correct number of significant digits.

Answer: The number of moles of solid iodine produced is 0.0327 moles

Explanation:

The number of moles is defined as the ratio of the mass of a substance to its molar mass.  The equation used is:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of solid iodine = 8.31 g

Molar mass of solid iodine = 253.8089 g/mol

Plugging values in equation 1:

[tex]\text{Moles of solid iodine}=\frac{8.31g}{253.8089g/mol}=0.0327mol[/tex]

Hence, the number of moles of solid iodine produced is 0.0327 moles

1) The order of decreasing priority would allow determining E/Z or R/S is "dbca".

2)  The order of decreasing priority would allow determining E/Z or R/S is "acbd".

Absolute configuration can be described as to the spatial arrangement of atoms within a chiral molecular entity. Absolute configuration in organic molecules, where carbon is bonded to four different substituents.

The absolute configuration has used a set of rules to describe the relative positions around the chiral center atom. The most common labeling method is the descriptors R or S where R and S refer to Rectus and Sinister.

The group with the highest atomic number will get the highest priority and the group with the lowest atomic number substituents will get the lowest priority. Therefore, the order of priority is -CH₂Br > -CH₂OH > -CH₂NH₂ > -CH₃.

Therefore, the order of priority for the second part is -F > -CHO > -CH₂OH > -CH₃.

Learn more about absolute configuration, here:

https://brainly.com/question/14365822

#SPJ5

Acids have sour taste, low pH and dissolves metals.

The list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.

An acid is a chemical substance that has the ability to donate hydrogen ions when involved in a chemical reaction.

The following are the characteristics or features of an acid:

Therefore, the list that describes the characteristics of an acid is that it has sour taste, low pH, and dissolves metals.

Learn more about acids here:

https://brainly.com/question/1302816

Answer:

indicates the number of subshells

Answer:

43.0 L

Explanation:

Step 1: Given and required data

Step 2: Calculate the volume of the flask (V)

We will use the ideal gas equation.

P × V = n × R × T

V = n × R × T / P

V = 1.99 mol × (0.0821 atm.L/mol.K) × 313 K / 1.19 atm = 43.0 L

The answer is 4.30 L

Answer:

Higher than the actual value

Explanation:

Titration is a volumetric process in which a known volume of solution is dispensed from a burette to react with a known volume of solution in a conical flask.

When acid-base titration is carried out in such a way that the base is in the burette and the acid is in the conical flask and drops of the base adhere to the inner walls of the flask, but do not actually mix with the solution, the calculated acid concentration would be higher than the actual value.

This is because;

From CA= CBVBnA/VAnB

When VB(volume of base) that reacted is lower than the actual volume recorded, then the calculated volume of CA(concentration of acid) is much higher than the actual value since drops of the base adhere to the inner walls of the flask.

Answer:

The answer is Iron.

Explanation:

I hope this helps you out. Have a nice day!

Answer:

both

Explanation:

A homolytic fission is said to have occurred when the breakage of a bond between two atoms leaves each of the bonding atoms with equal number of electrons. Homolytic fission often results in the creation of radicals.

Since homolytic fission yields two species with equal number of electrons(usually odd number of electrons), the products of such process can not be charged. They can not be nucleophiles because nucleophiles need to possess two electrons which can be shared with another chemical specie.

Answer:

Draw the skeletal structure for: (E)-hept-5-en-2-one

Explanation:

The root word hept indicates that the given compound has seven carons in its longest chain.

-en- primary suffix indicates that the compound has one double bond in it.

2-one indicates that the compound has -C=O bond in the second carbon.

The prefix (E) indicates that the highest priority groups are on the opposite direction of the double bond.

The structure of the given molecule is:

Answer:

Identify a process that is NOT reversible.

Melting of snow

baking of bread

deposition of carbon dioxide

freezing water

melting of aluminum

Explanation:

A physical change is the one in which there is a change only in its physical state, color, the appearance of the substance. But the chemical composition of the substance remains unchanged.

It is a temporary change and can be reversed easily.

For example:

melting, freezing, deposition etc.

Baking is a permanent change and the chemical composition of the substance changes.

Hence, among the given options, baking of bread is not a reversible change.

Out of the following all are physical changes except baking of bread and physical changes are reversible so the process  which is not reversible is baking of bread.

Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.

Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.

They involve only rearrangement of atoms and are often characterized to be changes which are reversible.

Learn more about physical changes,here:

https://brainly.com/question/17931044

#SPJ5

Answer: A bromine radical is more stable than chlorine radical, so it is less reactive and more choosy.

Explanation:

A chlorine atom being more electronegative in nature is able to attract a hydrogen atom more readily towards itself as compared to a bromine atom.

Since bromine is less electronegative in nature so bromine will be more selective as a hydrogen abstracting agent. As a result, bromine radical is more stable in nature than chlorine radical.

Thus, we can conclude that bromine radical is more stable than chlorine radical, so it is less reactive and more choosy.

Answer:

6.023*10^23........ .......

Answer:

HCN, weak acid

H⁺, Br⁻, strong acid

Explanation:

Hydrocyanic acid is a weak acid, according to the following equation.

HCN(aq) ⇄ H⁺(aq) + CN⁻(aq)

Thus, it should be written in the undissociated form (HCN).

Hydrobromic acid is a strong acid, according to the following equation.

HBr(aq) ⇒ H⁺(aq) + Br⁻(aq)

Thus, it should be written in the ionic form (H⁺, Br⁻).

Answer:

E°(Ag⁺/Fe°) = 0.836 volt

Explanation:

3Ag⁺ + 3e⁻ => Ag°;            E° = +0.800 volt

Fe° => Fe⁺³ + 3e⁻ ;             E° = -0.036 volt

_________________________________

Fe°(s) + 3Ag⁺(aq) => Fe⁺³(aq) + 3Ag°(s) ...    

E°(Ag⁺/Fe°) = E°(Ag⁺) - E°(Fe°) = 0.800v - ( -0.036v) = 0.836 volt

Saturated fatty acids lack double bonds between the individual carbon atoms, while in unsaturated fatty acids there is at least one double bond in the fatty acid chain. Saturated fats tend to be solid at room temperature and from animal sources, while unsaturated fats are usually liquid and from plant sources.

Answer:

hope it is helpful to you

☆☆☆☆☆☆☆☆☆

Answer:

The correct answer is - no not adhere to the law of mass conservation.

Explanation:

According to the law of mass conservation in an isolated system, the mass can not be created or destroyed and in a chemical or physical change, the mass of products should be always equal to the mass of reactants.

On the basis of the law the mass of the chemical reaction-

Mass of products = mass of reactants

33 g of methane + 289g of oxygen = 189g of carbon dioxide + 30g of water

322g ≠ 219 g

which means this reaction does not adhere to the law of conservation.

Answer: the molecular formula of  trioxide is ClOClO3 or Cl2O4

hope its helps you.

keep smiling be happy stay safe

Answer:

2.89x10⁻⁵M = [HPO₄²⁻]

Explanation:

The equilibrium of H3PO4 in water occurs H2PO4-:

H3PO4(aq) + H2O(l) ⇄ H3O⁺(aq) + H2PO4⁻(aq)

pKa = 2.16. And as pKa = -log Ka; Ka = 10^-2.16

Ka = 6.9183x10⁻³ = [H3O⁺] [H2PO4⁻] / [H3PO4]

As both [H3O⁺] and [H2PO4⁻] comes from the same equilibrium,

[H3O⁺]=[H2PO4⁻] :

[H3O⁺] = X

[H2PO4⁻] = X

[H3PO4] = 0.042 - X

Where X is reaction coordinate

Replacing:

6.9183x10⁻³ = [X] [X] / [0.042 - X]

6.9183x10⁻³ = X² / 0.042 - X

2.905686x10⁻⁴ - 6.9183x10⁻³X - X² = 0

Solving for X:

X = -0.02M. False solution. There is no negative concentration.

X = 0.014M. Right solution

[H2PO4⁻] = 0.014M

In the second equilibrium:

H2PO4⁻(aq) + H2O(l) ⇄ HPO4-(aq) + H3O+(aq)

Based on the same principles of the last equilibrium:

pKa2 = 7.21

Ka2 = 6.166x10⁻⁸ = [HPO4-] [H3O+] / [H2PO4⁻]

[HPO4-] = X

[H3O+] = X

[H2PO4⁻] = 0.014M - X

6.166x10⁻⁸ = X² / [0.014M - X]

8.3623x10⁻¹⁰ - 6.166x10⁻⁸X - X² = 0

Solving for X:

X = -0.0000289485. False solution.

X =

Answer:

Explanation:

hope it heloed

Answer:

1 ) Δs ( entropy change for hot block ) = - Q / th  ( -ve shows heat lost to cold block )

Δs ( entropy change for cold block ) = Q / tc

∴ Total Δs = ΔSc + ΔSh

                 = Q/tc - Q/th

2) ΔSdecomposition = Δh / Temp = ( 181.6 * 10^3 / 773 ) = 234.928 J/k

Explanation:

1) To show that heat flows spontaneously from high temperature to low temperature

example :

Pick two(2) solid metal blocks with varying temperatures ( i.e. one solid block is hot and the other solid block is cold )

Place both blocks for time (t ) in an insulated system to reduce heat loss or gain to or from the environment

Check the temperature of both blocks after time ( t ) it will be observed that both blocks will have same temperature after time t ( first law of thermodynamics )

Δs ( entropy change for hot block ) = - Q / th  ( -ve shows heat lost to cold block )

Δs ( entropy change for cold block ) = Q / tc

∴ Total Δs = ΔSc + ΔSh

                 = Q/tc - Q/th

2) Entropy change for Decomposition of mercuric oxide

2HgO (s) → 2Hg(l) + O₂ (g)

Δs = positive

there is transition from solid to liquid and the melting point of mercury ( the point at which reaction will take place ) = 500⁰C

hence ΔSdecomposition = S⁻ Hg  -  S⁻ HgO =

Δh of reaction = 181.6 KJ

Temp = 500 + 273 = 773 k

hence ΔSdecomposition = Δh / Temp = ( 181.6 * 10^3 / 773 ) = 234.928 J/k

Answer:

Lower than

Higher than

Explanation:

The vapour pressure and boiling point of liquids are inversely related. Thus, the higher the vapour pressure of a liquid, the lower it's boiling point. Lower vapour pressure implies that the liquid is easily converted into vapour phase.

If hexane has a higher vapour pressure than water then its boiling point is lower than that of water and its vapor pressure when it is boiling will be higher than water when water is boiling.

Answer:

Explanation:

The density of pure water is 1 gram per 1 milliliter or one cubic cm. By knowing the density of water we can use it in dilution equations or to calculate the specific gravity of other solutions.

It can also help us determine what other substances are made of using the water displacement experiment. This is done by observing how much water is displaced when an object is submerged in the water. As long as you know the density of the water, the mass of the object being submerged and the volume of increase you can calculate the density of the object.

This was done by the great Archimedes in discovering what composed the kings crown.

Answer:

qualatatiev is fs-hj_jakakak

Answer:

For (1): The correct option is (a)

For (2): The correct option is (a) and 333.6 kJ of heat will be absorbed when 70.9 g of ammonia reacts.

Explanation:

There are 2 types of reactions that are classified based on enthalpy change:

Endothermic reactions: These are the reactions where heat is absorbed by the reaction. The change in enthalpy of the reaction, [tex]\Delta H_{rxn}[/tex] is positive for these reactions.

Exothermic reactions: These are the reactions where heat is released by the reaction. The change in enthalpy of the reaction, [tex]\Delta H_{rxn}[/tex] is negative for these reactions.

For the given chemical reaction:

[tex]2NH_3(g)\rightarrow N_2(g)+3H_2(g);Delta H=160kJ[/tex]

As the change in enthalpy or heat of the reaction is positive. Thus, the reaction is an endothermic reaction because heat is absorbed by the reaction.

When ammonia reacts, some amount of heat will be absorbed by the reaction. Thus, we can say the heat will be absorbed.

The number of moles is calculated by using the equation:

[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)

Given mass of ammonia = 70.9 g

Molar mass of ammonia = 17 g/mol

Using equation 1:

[tex]\text{Moles of ammonia}=\frac{70.9g}{17g/mol}=4.17mol[/tex]

By stoichiometry of the reaction:

If 2 mole of ammonia reacts, the heat absorbed is 160 kJ

So, if 4.17 moles of ammonia reacts, the heat absorbed will be = [tex]\frac{160kJ}{2mol}\times 4.17mol=333.6kJ[/tex]

Hence, 333.6 kJ of heat will be absorbed when 70.9 g of ammonia reacts

Answer:

1.17 L of H₂

Explanation:

We'll begin by calculating the number of mole in 2.3 g of Mg. This can be obtained as follow:

Mass of Mg = 2.3 g

Molar mass of Mg = 24 g/mol

Mole of Mg =?

Mole = mass /molar mass

Mole of Mg = 2.3 / 24

Mole of Mg = 0.096 mole

Next, we shall determine the number of mole of H₂ produced by the reaction of 2.3 g (i.e 0.096 mole) of Mg. This can be obtained as follow:

Mg + 2HCl —> MgCl₂ + H₂

From the balanced equation above,

1 mole of Mg reacted to 1 mole of H₂.

Therefore, 0.096 mole of Mg will also react to produce 0.096 mole of H₂.

Finally, we shall determine volume of H₂ produced from the reaction. This can be obtained as follow:

Number of mole (n) of H₂ = 0.096 mole

Pressure (P) = 2 atm

Temperature (T) = 298 K

Gas constant (R) = 0.0821 atm.L/Kmol

Volume (V) of H₂ =?

PV = nRT

2 × V = 0.096 × 0.0821 × 298

Divide both side by 2

V = (0.096 × 0.0821 × 298) /2

V = 1.17 L

Therefore, 1.17 L of H₂ were obtained from the reaction.

Answer:

storage solution , deionized water, stabilizes

Explanation:

A pH meter is a scientific device or instrument that is used to measure the pH of a given aqueous solution thereby determining the nature of the solution whether it is acidic or basic or neutral.

While using the pH meter or taking the measurement using the pH meter --

Answer:

Hi friend

I hope this image will help you if not I'm sorry

if this help you please mark me as brinalist or vote me.

Thankyou

answer; 1/ 20_2[2-] +2e - ->0.