The total cost (in dollars) of manufacturing x auto body frames is C(x)=40,000+500x (A) Find the average cost per unit if 500 frames are produced. (B) Find the marginal average cost at a production level of 500 units. (C) Use the results from parts (A) and (B) to estimate the average cost per frame if 501 frames are produced E (A) If 500 frames are produced, the average cost is $ per frame. k-) D21 unctic H 418 418 10 (3) Points: 0 of 1 Save located tenia Lab work- nzi The total cost (in dollars) of producing x food processors is C(x)=1900+60x-0.2x² (A) Find the exact cost of producing the 41st food processor. (B) Use the marginal cost to approximate the cost of producing the 41st food processor (A) The exact cost of producing the 41st food processor is $ The total cost (in dollars) of producing x food processors is C(x)=2200+50x-0.1x². (A) Find the exact cost of producing the 41st food processor. (B) Use the marginal cost to approximate the cost of producing the 41st food processor. XOR (A) The exact cost of producing the 41st food processor is $. DZL unctic x -k- 1

To find the percentile rank using the mean and standard deviation, you need to calculate the z-score and then use the z-table to determine the corresponding percentile rank.

To find the percentile rank using the mean and standard deviation, you can follow these steps:

1. Determine the given value for which you want to find the percentile rank.
2. Calculate the z-score of the given value using the formula: z = (X - mean) / standard deviation, where X is the given value.
3. Look up the z-score in the standard normal distribution table (also known as the z-table) to find the corresponding percentile rank. The z-score represents the number of standard deviations the given value is away from the mean.
4. If the z-score is positive, the percentile rank can be found by looking up the z-score in the z-table and subtracting the area under the curve from 0.5. If the z-score is negative, subtract the area under the curve from 0.5 and then subtract the result from 1.
5. Multiply the percentile rank by 100 to express it as a percentage.

For example, let's say we want to find the percentile rank for a value of 85, given a mean of 75 and a standard deviation of 10.

1. X = 85
2. z = (85 - 75) / 10 = 1
3. Looking up the z-score of 1 in the z-table, we find that the corresponding percentile is approximately 84.13%.
4. Multiply the percentile rank by 100 to get the final result: 84.13%.

In conclusion, to find the percentile rank using the mean and standard deviation, you need to calculate the z-score and then use the z-table to determine the corresponding percentile rank.

Know more about standard deviation here,

https://brainly.com/question/13498201

#SPJ11

The flux of F away from the origin through the surface S is 21π.

To evaluate the flux of the vector field F = xi + yj + zk through the surface S, we need to calculate the surface integral ∬_S F · dS, where dS is the vector differential of the surface S.

First, let's find the normal vector to the surface S. The equation of the plane is given as 2x + 3y - z + 6 = 0. We can rewrite it in the form z = 2x + 3y + 6.

The coefficients of x, y, and z in the equation correspond to the components of the normal vector to the plane.

Therefore, the normal vector to the surface S is n = (2, 3, -1).

Next, we need to parametrize the surface S in terms of two variables. We can use the parametric equations:

x = u

y = v

z = 2u + 3v + 6

where (u, v) is a point in the region projected onto the xy-plane: (x - 1)² + (y - 1)² ≤ 1.

Now, we can calculate the surface integral ∬_S F · dS.

∬_S F · dS = ∬_S (xi + yj + zk) · (dSx i + dSy j + dSz k)

Since dS = (dSx, dSy, dSz) = (∂x/∂u du, ∂y/∂v dv, ∂z/∂u du + ∂z/∂v dv), we can calculate each component separately.

∂x/∂u = 1

∂y/∂v = 1

∂z/∂u = 2

∂z/∂v = 3

Now, we substitute these values into the integral:

∬_S F · dS = ∬_S (xi + yj + zk) · (∂x/∂u du i + ∂y/∂v dv j + ∂z/∂u du i + ∂z/∂v dv k)

= ∬_S (x∂x/∂u + y∂y/∂v + z∂z/∂u + z∂z/∂v) du dv

= ∬_S (u + v + (2u + 3v + 6) * 2 + (2u + 3v + 6) * 3) du dv

= ∬_S (u + v + 4u + 6 + 6u + 9v + 18) du dv

= ∬_S (11u + 10v + 6) du dv

Now, we need to evaluate this integral over the region projected onto the xy-plane, which is the circle centered at (1, 1) with a radius of 1.

To convert the integral to polar coordinates, we substitute:

u = r cosθ

v = r sinθ

The Jacobian determinant is |∂(u, v)/∂(r, θ)| = r.

The limits of integration for r are from 0 to 1, and for θ, it is from 0 to 2π.

Now, we can rewrite the integral in polar coordinates:

∬_S (11u + 10v + 6) du dv = ∫_0^1 ∫_0^(2π) (11(r cosθ) + 10(r sinθ) + 6) r dθ dr

= ∫_0^1 (11r²/2 + 10r²/2 + 6r) dθ

= (11/2 + 10/2) ∫_0^1 r² dθ + 6 ∫_0^1 r dθ

= 10.5 ∫_0^1 r² dθ + 6 ∫_0^1 r dθ

Now, we integrate with respect to θ and then r:

= 10.5 [r²θ]_0^1 + 6 [r²/2]_0^1

= 10.5 (1²θ - 0²θ) + 6 (1²/2 - 0²/2)

= 10.5θ + 3

Finally, we evaluate this expression at the upper limit of θ (2π) and subtract the result when evaluated at the lower limit (0):

= 10.5(2π) + 3 - (10.5(0) + 3)

= 21π + 3 - 3

= 21π

Therefore, the flux of F away from the origin through the surface S is 21π.

To learn more about vector field visit:

brainly.com/question/32574755

#SPJ11

To evaluate the limit lim x→0, 2 sin(x + sin(x)), we can use the property of continuity. By substituting the limit value directly into the function, we can determine the value of the limit.

The function 2 sin(x + sin(x)) is a composition of continuous functions, namely the sine function. Since the sine function is continuous for all real numbers, we can apply the property of continuity to evaluate the limit.

By substituting the limit value, x = 0, into the function, we have 2 sin(0 + sin(0)) = 2 sin(0) = 2(0) = 0.

Therefore, the limit lim x→0, 2 sin(x + sin(x)) evaluates to 0. The continuity of the sine function allows us to directly substitute the limit value into the function and obtain the result without the need for further computations.

Learn more about limits here:

https://brainly.com/question/12211820

#SPJ11

(a) The revenue function R is given by: R = -0.04q^2 + 800q.

(b) R' = -0.08q + 800.

(c) R'(5000) = 400.

(d) P(q) = -0.04q^2 + 600q - 300000.

(e) P' = -0.08q + 600.

(f) P'(5000) = 200, P'(8000) = -320.

(g) The profit function is an inverted parabola with a maximum at the vertex.

Given:

(a) The revenue function R is given by:

R = pq

Revenue = price per unit × quantity demanded

R = pq

R = (-0.04q + 800)q

R = -0.04q^2 + 800q

(b) Marginal revenue is the derivative of the revenue function with respect to q.

R' = dR/dq

R' = d/dq(-0.04q^2 + 800q)

R' = -0.08q + 800

(c) R'(5000) = -0.08(5000) + 800

R'(5000) = 400

At a quantity demanded of 5000 units, the marginal revenue is $400. This means that the revenue will increase by $400 if the quantity demanded is increased from 5000 to 5001 units.

(d) Profit is defined as total revenue minus total cost.

P(q) = R(q) - C(q)

P(q) = -0.04q^2 + 800q - 200q - 300000

P(q) = -0.04q^2 + 600q - 300000

(e) Marginal profit is the derivative of the profit function with respect to q.

P' = dP/dq

P' = d/dq(-0.04q^2 + 600q - 300000)

P' = -0.08q + 600

(f) P'(5000) = -0.08(5000) + 600

P'(5000) = 200

P'(8000) = -0.08(8000) + 600

P'(8000) = -320

(g) The graph of the profit function is a quadratic function with a negative leading coefficient (-0.04). This means that the graph is an inverted parabola that opens downwards. The maximum profit occurs at the vertex of the parabola.

Learn more about revenue function

https://brainly.com/question/29148322

#SPJ11

The determinant of the matrix B is [tex]\(12(y-34)\).[/tex] and  on ( ii ) when [tex]\(y = 12\), \(x = \frac{37}{3}\).[/tex]

Let's solve the given problems using the properties of determinants.

(i) To find the determinant of the matrix [tex]B = (4,17,7,2,y,3,1,x,7)[/tex], we can use the properties of determinants. We can perform row operations to transform the matrix B into an upper triangular form and then take the product of the diagonal elements.

The given matrix B is:

[tex]\[B = \begin{bmatrix}4 & 17 & 7 \\2 & y & 3 \\1 & x & 7 \\\end{bmatrix}\][/tex]

Performing row operations, we can subtract the first row from the second row twice and subtract the first row from the third row:

[tex]\[\begin{bmatrix}4 & 17 & 7 \\0 & y-34 & -1 \\0 & x-4 & 3 \\\end{bmatrix}\][/tex]

Now, we can take the product of the diagonal elements:

[tex]\[\det(B) = (4) \cdot (y-34) \cdot (3) = 12(y-34)\][/tex]

So, the determinant of the matrix B is [tex]\(12(y-34)\).[/tex]

(ii) If [tex]\(y = 12\),[/tex] we can substitute this value into the matrix A and solve for [tex]\(x\)[/tex]. The given matrix A is:

[tex]\[A = \begin{bmatrix}5 & x & 7 \\10 & y & 3 \\20 & 17 & 7 \\\end{bmatrix}\][/tex]

Substituting  [tex]\(y = 12\)[/tex] into the matrix A, we have:

[tex]\[A = \begin{bmatrix}5 & x & 7 \\10 & 12 & 3 \\20 & 17 & 7 \\\end{bmatrix}\][/tex]

To find [tex]\(x\),[/tex] we can calculate the determinant of A and equate it to the given determinant value of -385:

[tex]\[\det(A) = \begin{vmatrix}5 & x & 7 \\10 & 12 & 3 \\20 & 17 & 7 \\\end{vmatrix} = -385\][/tex]

Using cofactor expansion along the first column, we have:

[tex]\[\det(A) &= 5 \begin{vmatrix} 12 & 3 \\ 17 & 7 \end{vmatrix} - x \begin{vmatrix} 10 & 3 \\ 20 & 7 \end{vmatrix} + 7 \begin{vmatrix} 10 & 12 \\ 20 & 17 \end{vmatrix} \\\\&= 5((12)(7)-(3)(17)) - x((10)(7)-(3)(20)) + 7((10)(17)-(12)(20)) \\\\&= -385\][/tex]

Simplifying the equation, we get:

[tex]\[-105x &= -385 - 5(84) + 7(-70) \\-105x &= -385 - 420 - 490 \\-105x &= -1295 \\x &= \frac{-1295}{-105} \\x &= \frac{37}{3}\][/tex]

Therefore, when [tex]\(y = 12\), \(x = \frac{37}{3}\).[/tex]

To know more about equation visit-

brainly.com/question/32246560

#SPJ11

The domain of the function f(x) = 51x - 3 is all real numbers, and there is no x-intercept or y-intercept.

To find the domain of the function, we need to determine the set of all possible values for x. In this case, since f(x) is a linear function, it is defined for all real numbers. Therefore, the domain is all real numbers.

To find the x-intercept(s) of the graph, we set f(x) equal to zero and solve for x. However, when we set 51x - 3 = 0, we find that x = 3/51, which simplifies to x = 1/17. This means there is one x-intercept at x = 1/17.

For the y-intercept(s), we set x equal to zero and evaluate f(x).

Plugging in x = 0 into the function, we get f(0) = 51(0) - 3 = -3. Therefore, the y-intercept is at y = -3.

In conclusion, the domain of the function f(x) = 51x - 3 is all real numbers, there is one x-intercept at x = 1/17, and the y-intercept is at y = -3.

Learn more about domain of the function:

https://brainly.com/question/28599653

#SPJ11

We have evaluated the indefinite integral of the given function and shown all the steps. The final answer is `int [1 + e^(-x)] dx = x - e^(-x) + C`.

Given indefinite integral is: int [1 + e^(-x)] dx
Let us consider the first term of the integral:
`int 1 dx = x + C1`
where C1 is the constant of integration.
Now, let us evaluate the second term of the integral:
`int e^(-x) dx = - e^(-x) + C2`
where C2 is the constant of integration.
Thus, the indefinite integral is:
`int [1 + e^(-x)] dx = x - e^(-x) + C`
where C = C1 + C2.
Hence, the main answer is:
`int [1 + e^(-x)] dx = x - e^(-x) + C`

In conclusion, we have evaluated the indefinite integral of the given function and shown all the steps. The final answer is `int [1 + e^(-x)] dx = x - e^(-x) + C`.

Learn more about integral visit:

brainly.com/question/31433890

#SPJ11

To prove that d(a^T y)/dz = (da/dz)^T y + a^T(dy/dz), where a and y are functions of vector z, we can use the chain rule and properties of vector derivatives.

Let's start by defining a as a function of vector z: a = a(z), and y as a function of vector z: y = y(z).

The expression a^T y can be written as a dot product between a and y: a^T y = a^T(y).

Now, let's differentiate the expression a^T y with respect to z using the chain rule:

d(a^T y)/dz = d(a^T(y))/dz

By applying the chain rule, we have:

= (da^T(y))/dz + a^T(dy)/dz

Now, let's simplify the two terms separately:

1. (da^T(y))/dz:

Using the product rule, we have:

(da^T(y))/dz = (da/dz)^T y + a^T(dy/dz)

2. a^T(dy)/dz:

Since a is a constant with respect to y, we can move it outside the derivative:

a^T(dy)/dz = a^T(dy/dz)

Substituting these simplifications back into the expression, we get:

d(a^T y)/dz = (da/dz)^T y + a^T(dy/dz)

Therefore, we have proved that d(a^T y)/dz = (da/dz)^T y + a^T(dy/dz).

Learn more about chain rule here:

https://brainly.com/question/31585086

#SPJ11

The next elementary row operation that should be performed in order to put the matrix into diagonal form is: R₁ + (3)R₂ → R₁.

This operation is performed to eliminate the non-zero entry in the (1,2) position of the matrix. By adding three times row 2 to row 1, we modify the first row to eliminate the non-zero entry in the (1,2) position and move closer to achieving a diagonal form for the matrix.

Performing this elementary row operation will change the matrix but maintain the equivalence between the original system of equations and the modified system. It is an intermediate step towards achieving diagonal form, where all off-diagonal entries become zero.

To know more about row operation,

https://brainly.com/question/30814710

#SPJ11

The equation $515x(1.29)^2 + $140 + 1.295 * 1.292x = $0.0 is a quadratic equation. After solving it, the value of x is approximately $-1.17.

The given equation is a quadratic equation in the form of [tex]ax^2 + bx + c[/tex] = 0, where a = $515[tex](1.29)^2[/tex], b = 1.295 * 1.292, and c = $140. To solve the equation, we can use the quadratic formula: x = (-b ± √([tex]b^2[/tex] - 4ac)) / (2a).

Plugging in the values, we have x = [tex](-(1.295 * 1.292) ± \sqrt{((1.295 * 1.292)^2 - 4 * $515(1.29)^2 * $140))} / (2 * $515(1.29)^2)[/tex].

After evaluating the equation, we find two solutions for x. However, since the problem asks for the rounded answer to the nearest cent, we get x ≈ -1.17. Therefore, the approximate solution to the given equation is x = $-1.17.

Learn more about equation here:

https://brainly.com/question/29657988

#SPJ11

The values of C₁ and C₂ can be determined by solving the given differential equation and applying the initial conditions. The correct answer is (c) C₁,2 = 1 & 0.

To solve the differential equation y" + y = sec(x)tan(x), we can use the method of undetermined coefficients.

Since the right-hand side of the equation contains sec(x)tan(x), we assume a particular solution of the form [tex]y_p = A sec(x) + B tan(x),[/tex] where A and B are constants.

Taking the first and second derivatives of y_p, we have:

[tex]y_p' = A sec(x)tan(x) + B sec^2(x)[/tex]

[tex]y_p" = A sec(x)tan(x) + 2B sec^2(x)tan(x)[/tex]

Substituting these into the differential equation, we get:

(A sec(x)tan(x) + 2B sec²(x)tan(x)) + (A sec(x) + B tan(x)) = sec(x)tan(x)

Simplifying the equation, we have:

2B sec²(x)tan(x) + B tan(x) = 0

Factoring out B tan(x), we get:

B tan(x)(2 sec²(x) + 1) = 0

Since sec²(x) + 1 = sec²(x)sec²(x), we have:

B tan(x)sec(x)sec²(x) = 0

This equation holds true when B = 0, as tan(x) and sec(x) are non-zero functions. Therefore, the particular solution becomes

[tex]y_p = A sec(x).[/tex]

To find the complementary solution, we solve the homogeneous equation y" + y = 0. The characteristic equation is r² + 1 = 0, which has complex roots r = ±i.

The complementary solution is of the form [tex]y_c = C_1cos(x) + C_2 sin(x)[/tex], where C₁ and C₂ are constants.

The general solution is [tex]y = y_c + y_p = C_1 cos(x) + C_2 sin(x) + A sec(x)[/tex].

Applying the initial conditions y(0) = 1 and y'(0) = 1, we have:

y(0) = C₁ = 1,

y'(0) = -C₁ sin(0) + C₂ cos(0) + A sec(0)tan(0) = C₂ = 1.

Therefore, the values of C₁ and C₂ are 1 and 1, respectively.

Hence, the correct answer is (c) C₁,2 = 1 & 0.

To learn more about differential equation visit:

brainly.com/question/32650995

#SPJ11

the solution of the given Bernoulli equation using the substitution y = v⁻² is y(t) = t⁷/[C - (7/2)t⁷ln t].

The given Bernoulli equation is t²y' + 7ty − y³ = 0, t > 0We need to solve the Bernoulli equation by using this substitution.

The substitution is y = v⁻².Substituting the value of y in the Bernoulli equation we get, y = v⁻²t²(dy/dt) + 7tv⁻² - v⁻⁶ = 0Multiplying the whole equation by v⁴, we get:

v²t²(dy/dt) + 7t(v²) - 1 = 0This is a linear differential equation in v². By solving this equation, we can find the value of v².

The general solution of the above equation is:v² = (C/t⁷) - (7/2)(ln t)/t⁷

where C is the constant of integration.

Substituting v² = y⁻¹, we get:

y(t) = t⁷/[C - (7/2)t⁷ln t]

Therefore, the solution of the given Bernoulli equation using the substitution y = v⁻² is y(t) = t⁷/[C - (7/2)t⁷ln t].

learn more about Bernoulli equation here

https://brainly.com/question/15396422

#SPJ11

Q1:  The null space of A is the set of all vectors of the form x = (-2t, t) where t is a scalar.

Let A = 1 2 0.

Find: A² = 5 2 0 2A+I = 3 2 0 1 AT = 1 0 2tr(A) = 1 + 2 + 0 = 3A-1 = -1 ½ 0 0 1 0 0 0 0TA(1,1,1) = 3vii)

the solution set of Ax=0. Null space is the set of all solutions to Ax = 0.

The null space of A can be found as follows:

Ax = 0⟹ 1x1 + 2x2 = 0⟹ x1 = -2x2

Therefore, the null space of A is the set of all vectors of the form x = (-2t, t) where t is a scalar.

Q2: Let V be the subspace of R³ spanned by the set S={v₁=(1, 2,2), v₂=(2, 4,4), V₃=(4, 9, 8)}.

Find a subset of 5 that forms a basis for V. Because all three vectors are in the same plane (namely, the plane defined by their span), only two of them are linearly independent. The first two vectors are linearly dependent, as the second is simply the first one scaled by 2. The first and the third vectors are linearly independent, so they form a basis of the subspace V. 1,2,24,9,84,0,2

Thus, one possible subset of 5 that forms a basis for V is:

{(1, 2,2), (4, 9, 8), (8, 0, 2), (0, 1, 0), (0, 0, 1)}

Q3: Show that A = 0 1 0 is diagonalizable and find a matrix P that diagonalizes A. A matrix A is diagonalizable if and only if it has n linearly independent eigenvectors, where n is the dimension of the matrix. A has only one nonzero entry, so it has eigenvalue 0 of multiplicity 2.The eigenvectors of A are the solutions of the system Ax = λx = 0x = (x1, x2) implies x1 = 0, x2 any scalar.

Therefore, the set {(0, 1)} is a basis for the eigenspace E0(2). Any matrix P of the form P = [v1 v2], where v1 and v2 are the eigenvectors of A, will diagonalize A, as AP = PDP^-1, where D is the diagonal matrix of the eigenvalues (0, 0)

Q4: Assume that the vector space R³ has the Euclidean inner product. Apply the Gram-Schmidt process to transform the following basis vectors (1,0,0), (1,1,0), (1,1,1) into an orthonormal basis.

The Gram-Schmidt process is used to obtain an orthonormal basis from a basis for an inner product space.

1. First, we normalize the first vector e1 by dividing it by its magnitude:

e1 = (1,0,0) / 1 = (1,0,0)

2. Next, we subtract the projection of the second vector e2 onto e1 from e2 to obtain a vector that is orthogonal to e1:

e2 - / ||e1||² * e1 = (1,1,0) - 1/1 * (1,0,0) = (0,1,0)

3. We normalize the resulting vector e2 to get the second orthonormal vector:

e2 = (0,1,0) / 1 = (0,1,0)

4. We subtract the projections of e3 onto e1 and e2 from e3 to obtain a vector that is orthogonal to both:

e3 - / ||e1||² * e1 - / ||e2||² * e2 = (1,1,1) - 1/1 * (1,0,0) - 1/1 * (0,1,0) = (0,0,1)

5. Finally, we normalize the resulting vector to obtain the third orthonormal vector:

e3 = (0,0,1) / 1 = (0,0,1)

Therefore, an orthonormal basis for R³ is {(1,0,0), (0,1,0), (0,0,1)}.

Q5: Let T: R² R³ be the transformation defined by: T(x₁, x₂) = (x₁, x₂, X₁ + X ₂).

(a) Show that T is a linear transformation. T is a linear transformation if it satisfies the following two properties:

1. T(u + v) = T(u) + T(v) for any vectors u, v in R².

2. T(ku) = kT(u) for any scalar k and any vector u in R².

To prove that T is a linear transformation, we apply these properties to the definition of T.

Let u = (u1, u2) and v = (v1, v2) be vectors in R², and let k be any scalar.

Then,

T(u + v) = T(u1 + v1, u2 + v2) = (u1 + v1, u2 + v2, (u1 + v1) + (u2 + v2)) = (u1, u2, u1 + u2) + (v1, v2, v1 + v2) = T(u1, u2) + T(v1, v2)T(ku) = T(ku1, ku2) = (ku1, ku2, ku1 + ku2) = k(u1, u2, u1 + u2) = kT(u1, u2)

Therefore, T is a linear transformation.

(b) Show that T is one-to-one. To show that T is one-to-one, we need to show that if T(u) = T(v) for some vectors u and v in R²,

then u = v. Let u = (u1, u2) and v = (v1, v2) be vectors in R² such that T(u) = T(v).

Then, (u1, u2, u1 + u2) = (v1, v2, v1 + v2) implies u1 = v1 and u2 = v2.

Therefore, u = v, and T is one-to-one.

(c) Find [T]s, where S is the standard basis for R³ and B={v₁=(1,1),v₂=(1,0)).

To find [T]s, where S is the standard basis for R³, we apply T to each of the basis vectors of S and write the result as a column vector:

[T]s = [T(e1) T(e2) T(e3)] = [(1, 0, 1) (0, 1, 1) (1, 1, 2)]

To find [T]B, where B = {v₁, v₂},

we apply T to each of the basis vectors of B and write the result as a column vector:

[T]B = [T(v1) T(v2)] = [(1, 1, 2) (1, 0, 1)]

We can find the change-of-basis matrix P from B to S by writing the basis vectors of B as linear combinations of the basis vectors of S:

(1, 1) = ½(1, 1) + ½(0, 1)(1, 0) = ½(1, 1) - ½(0, 1)

Therefore, P = [B]S = [(1/2, 1/2) (1/2, -1/2)] and [T]B = [T]SP= [(1, 0, 1) (0, 1, 1) (1, 1, 2)] [(1/2, 1/2) (1/2, -1/2)] = [(3/4, 1/4) (3/4, -1/4) (3/2, 1/2)]

To know more about vectors visit:

https://brainly.in/question/4959928

#SPJ11

Using FOIL method, expanding the left-hand side of the equation, and simplifying it:

4x² - 2xy - 12y² = 4x² - 2xy - 12y

Since the left-hand side of the equation is equal to the right-hand side, the given equation is a polynomial identity.

To prove that the following equation is polynomial identities algebraically, we will use the FOIL method to expand the left-hand side of the equation and then simplify it.

So, let's get started:

(4x + 6y) (x - 2y) = 2 (2x² - xy - 6y)

Firstly, we'll multiply the first terms of each binomial, i.e., 4x × x which equals to 4x².

Next, we'll multiply the two terms present in the outer side of each binomial, i.e., 4x and -2y which gives us -8xy.

In the third step, we will multiply the two terms present in the inner side of each binomial, i.e., 6y and x which equals to 6xy.

In the fourth step, we will multiply the last terms of each binomial, i.e., 6y and -2y which equals to -12y².

Now, we will add up all the results of the terms we got:

4x² - 8xy + 6xy - 12y² = 2 (2x² - xy - 6y)

Simplifying the left-hand side of the equation further:

4x² - 2xy - 12y² = 2 (2x² - xy - 6y)

Next, we will multiply the 2 outside of the parentheses on the right-hand side by each of the terms inside the parentheses:

4x² - 2xy - 12y² = 4x² - 2xy - 12y

Thus, the left-hand side of the equation is equal to the right-hand side of the equation, and hence, the given equation is a polynomial identity.

To recap:

Given equation: (4x + 6y) (x - 2y) = 2 (2x² - xy - 6y)

Using FOIL method, expanding the left-hand side of the equation, and simplifying it:

4x² - 2xy - 12y² = 4x² - 2xy - 12y

Since the left-hand side of the equation is equal to the right-hand side, the given equation is a polynomial identity.

To know more about FOIL method visit:

https://brainly.com/question/29022127

#SPJ11

The local max and min points for the function f(x) = 2x³ + 3x² - 12x + 3 can be determined using the second derivative test. The local max points are (2, 11) and (0, 3), while the local min point is (-2, -13).

To find the local max and min points of a function, we need to analyze its critical points and apply the second derivative test. First, we find the first derivative of f(x), which is f'(x) = 6x² + 6x - 12. Setting f'(x) = 0, we solve for x and find the critical points at x = -2, x = 0, and x = 2.

Next, we take the second derivative of f(x), which is f''(x) = 12x + 6. Evaluating f''(x) at the critical points, we have f''(-2) = -18, f''(0) = 6, and f''(2) = 30.

Using the second derivative test, we determine that at x = -2, f''(-2) < 0, indicating a local max point. At x = 0, f''(0) > 0, indicating a local min point. At x = 2, f''(2) > 0, indicating another local max point.

Therefore, the local max points are (2, 11) and (0, 3), while the local min point is (-2, -13).

Learn more about function here: brainly.com/question/30660139

#SPJ11

In summary, we are given the initial value problem 1²y" = 2y with initial conditions y(1) = 2 and y'(1) = 3. We are asked to find the sum A + B such that y(x) = Az^(-1) + B^2 is the solution. The correct answer is (C) A + B = 2.

To solve the initial value problem, we differentiate y(x) twice to find y' and y''. Substituting these derivatives into the given differential equation 1²y" = 2y, we can obtain a second-order linear homogeneous equation. By solving this equation, we find that the general solution is y(x) = Az^(-1) + B^2, where A and B are constants.

Using the initial condition y(1) = 2, we substitute x = 1 into the solution and equate it to 2. Similarly, using the initial condition y'(1) = 3, we differentiate the solution and evaluate it at x = 1, setting it equal to 3. These two equations can be used to determine the values of A and B.

By substituting x = 1 into y(x) = Az^(-1) + B^2, we obtain A + B² = 2. And by differentiating y(x) and evaluating it at x = 1, we get -A + 2B = 3. Solving these two equations simultaneously, we find that A = 1 and B = 1. Therefore, the sum A + B is equal to 2.

In conclusion, the correct answer is (C) A + B = 2.

To learn more about linear homogeneous equation, click here:

brainly.com/question/31129559

#SPJ11

The characteristics of the given linear functions are as follows:

Function f(x): Rate of Change = 103, Initial Value = Not provided, Behavior = Increases at a constant rate of 103 units per change in x.

Function V(t): Rate of Change = 25, Initial Value = Not provided, Behavior = Increases at a constant rate of 25 units per change in t.

Function r(a): Rate of Change = 4, Initial Value = Not provided, Behavior = Increases at a constant rate of 4 units per change in a.

Function C(w): Rate of Change = Not provided, Initial Value = -7, Behavior = Not provided.

A linear function can be represented by the equation f(x) = mx + b, where m is the rate of change (slope) and b is the initial value or y-intercept. Based on the given information, we can determine the characteristics of the provided functions.

For the function f(x), the rate of change is given as 103. This means that for every unit increase in x, the function f(x) increases by 103 units. The initial value is not provided, so we cannot determine the y-intercept or starting point of the function. The behavior of the function f(x) is that it increases at a constant rate of 103 units per change in x.

Similarly, for the function V(t), the rate of change is given as 25, indicating that for every unit increase in t, the function V(t) increases by 25 units. The initial value is not provided, so we cannot determine the starting point of the function. The behavior of V(t) is that it increases at a constant rate of 25 units per change in t.

For the function r(a), the rate of change is given as 4, indicating that for every unit increase in a, the function r(a) increases by 4 units. The initial value is not provided, so we cannot determine the starting point of the function. The behavior of r(a) is that it increases at a constant rate of 4 units per change in a.

As for the function C(w), the rate of change is not provided, so we cannot determine the slope or rate of change of the function. However, the initial value is given as -7, indicating that the function C(w) starts at -7. The behavior of C(w) is not specified, so we cannot determine how it changes with respect to w without additional information.

Learn more about linear functions here:

https://brainly.com/question/29205018

#SPJ11

The definite integral of the expression ² dt /5 + 2t^4 dt, using the Fundamental Theorem of Calculus, is (1/5) * (t^5) + C, where C is the constant of integration.

This result is obtained by applying the power rule of integration to the term 2t^4, which gives us (2/5) * (t^5) + C.

By evaluating this expression at the limits of integration, we can find the definite integral with at least 4 decimal places of accuracy.

To calculate the definite integral, we first simplify the expression to (1/5) * (t^5) + C.

Next, we apply the power rule of integration, which states that the integral of t^n dt is equal to (1/(n+1)) * (t^(n+1)) + C.

By using this rule, we integrate 2t^4, resulting in (2/5) * (t^5) + C.

Finally, we substitute the lower and upper limits of integration into the expression to obtain the definite integral value.

Learn more about Calculus here: brainly.com/question/32512808

#SPJ11

The BCD code for 7 is 0111, the BCD code for 4 is 0100, and the BCD code for 11 is obtained by adding the BCD codes for 7 and 4, which is 0111 + 0100 = 1011.

BCD (Binary Coded Decimal) is a coding system that represents decimal digits using a 4-bit binary code. Each decimal digit from 0 to 9 is represented by its corresponding 4-bit BCD code.

For (a), the decimal digit 7 is represented in BCD as 0111. Each bit in the BCD code represents a power of 2, from right to left: 2^0, 2^1, 2^2, and 2^3.

For (b), the decimal digit 4 is represented in BCD as 0100.

To find the BCD code for 11, we can add the BCD codes for 7 and 4. Adding 0111 and 0100, we get:

   0111

 + 0100

 -------

   1011

The resulting BCD code is 1011, which represents the decimal digit 11.

In the BCD addition process, when the sum of the corresponding bits in the two BCD numbers is greater than 9, a carry is generated, and the sum is adjusted to represent the correct BCD code for the digit. In this case, the sum of 7 and 4 is 11, which is greater than 9. Therefore, the carry is generated, and the BCD code for 11 is obtained by adjusting the sum to 1011.

Learn more about power  here:

https://brainly.com/question/30226066

#SPJ11

(a)  lim Pn = lim[tex][5(1/3)^(n-1)][/tex]= 5×[tex]lim[(1/3)^(n-1)][/tex]= 5×0 = 0 for the equation (b) It is shown for the triangle. [tex]lim An = lim A0 = (25/4)*\sqrt{3}[/tex]

An equilateral triangle is a particular kind of triangle in which the lengths of the three sides are equal. With three congruent sides and three identical angles of 60 degrees each, it is a regular polygon. An equilateral triangle is an equiangular triangle since it has symmetry and three congruent angles. The equilateral triangle offers a number of fascinating characteristics.

The centroid is the intersection of its three medians, which join each vertex to the opposing side's midpoint. Each median is divided by the centroid in a 2:1 ratio. Equilateral triangles tessellate the plane when repeated and have the smallest perimeter of any triangle with a given area.

(a)Let P be the perimeter of the triangle in_n. Here, the perimeter is made of n segments, each of which is a side of one of the equilateral triangles of side-length[tex]5×(1/3)^n[/tex]. Therefore: Pn = [tex]3×5×(1/3)^n = 5×(1/3)^(n-1)[/tex]

Since 1/3 < 1, we see that [tex](1/3)^n[/tex] approaches 0 as n approaches infinity.

Therefore, lim Pn = lim [5(1/3)^(n-1)] = 5×lim[(1/3)^(n-1)] = 5×0 = 0.(b)Let A be the area of the triangle In.

Observe that In can be divided into four smaller triangles which are congruent to one another, so each has area 1/4 the area of In.

The process of cutting out the middle third of each side of In and replacing it with a new equilateral triangle whose sides are [tex]5×(1/3)^n[/tex]in length is equivalent to the process of cutting out a central triangle whose sides are [tex]5×(1/3)^n[/tex] in length and replacing it with 3 triangles whose sides are 5×(1/3)^(n+1) in length.

Therefore, the area of [tex]In+1 isA_{n+1} = 4A_n - (1/4)(5/3)^2×\sqrt{3}×(1/3)^{2n}[/tex]

Thus, lim An = lim A0, where A0 is the area of the original equilateral triangle of side-length 5.

We know the formula for the area of an equilateral triangle:A0 = [tex](1/4)×5^2×sqrt(3)×(1/3)^0 = (25/4)×sqrt(3)[/tex]

Therefore,[tex]lim An = lim A0 = (25/4)*\sqrt{3}[/tex]

Learn more about triangle here:
https://brainly.com/question/17824549

#SPJ11

Let us first determine the logarithmic derivative p′/p of the polynomial P(z).we obtain the desired partial fraction expansion: p'(z)/p(z) = d1/(z-z1) + d2/(z-z2) + ... + dr/(z-zr)where di = p'(zi) for i = 1, 2, ..., r.

Formulae used: fgh formula: (fgh) = f'gh+fg'h+ fgh'.The first thing to do is to find the logarithmic derivative p′/p.

We have: p(z) = an(2-21)(222)¹² ... (z-zr), therefore:p'(z) = an(2-21)(222)¹² ... [(1/(z-z1)) + (1/(z-z2)) + ... + (1/(z-zr))]

The logarithmic derivative is then: p'(z)/p(z) = [an(2-21)(222)¹² ... [(1/(z-z1)) + (1/(z-z2)) + ... + (1/(z-zr))]]/[an(2-21)(222)¹² ... (z-zr)]p'(z)/p(z) = [(1/(z-z1)) + (1/(z-z2)) + ... + (1/(z-zr))]

It can be represented as the following partial fraction expansion: p'(z)/p(z) = d1/(z-z1) + d2/(z-z2) + ... + dr/(z-zr)where d1, d2, ...,  dr are constants to be found. We can find these constants by equating the coefficients of both sides of the equation: p'(z)/p(z) = d1/(z-z1) + d2/(z-z2) + ... + dr/(z-zr)

Let's multiply both sides by (z - z1):[p'(z)/p(z)](z - z1) = d1 + d2 (z - z1)/(z - z2) + ... + dr (z - z1)/(z - zr)

Let's evaluate both sides at z = z1. We get:[p'(z1)/p(z1)](z1 - z1) = d1d1 = p'(z1)

Now, let's multiply both sides by (z - z2)/(z1 - z2):[p'(z)/p(z)](z - z2)/(z1 - z2) = d1 (z - z2)/(z1 - z2) + d2 + ... + dr (z - z2)/(z1 - zr)

Let's evaluate both sides at z = z2. We get:[p'(z2)/p(z2)](z2 - z2)/(z1 - z2) = d2 . Now, let's repeat this for z = z3, ..., zr, and we obtain the desired partial fraction expansion: p'(z)/p(z) = d1/(z-z1) + d2/(z-z2) + ... + dr/(z-zr)where di = p'(zi) for i = 1, 2, ..., r.

To know more about Derivative  visit :

https://brainly.com/question/29144258

#SPJ11

The solution to the given differential equation, subject to the given initial condition, is y = (1 + 2e^(1/2))e^(-x²/2).

The first-order linear differential equation can be represented as

x²y + xy + 2 = 0

The first step in solving a differential equation is to look for a separable differential equation. Unfortunately, this is impossible here since both x and y appear in the equation. Instead, we will use the integrating factor method to solve this equation. The integrating factor for this differential equation is given by:

IF = e^int P(x)dx, where P(x) is the coefficient of y in the differential equation.

The coefficient of y is x in this case, so P(x) = x. Therefore,

IF = e^int x dx= e^(x²/2)

Multiplying both sides of the differential equation by the integrating factor yields:

e^(x²/2) x²y + e^(x²/2)xy + 2e^(x²/2)

= 0

Rewriting this as the derivative of a product:

d/dx (e^(x²/2)y) + 2e^(x²/2) = 0

Integrating both sides concerning x:

= e^(x²/2)y

= -2∫ e^(x²/2) dx + C, where C is a constant of integration.

Using the substitution u = x²/2 and du/dx = x, we have:

= -2∫ e^(x²/2) dx

= -2∫ e^u du/x

= -e^(x²/2) + C

Substituting this back into the original equation:

e^(x²/2)y = -e^(x²/2) + C + 2e^(x²/2)

y = Ce^(-x²/2) - 2

Taking y(1) = 1, we get:

1 = Ce^(-1/2) - 2C = (1 + 2e^(1/2))/e^(1/2)

y = (1 + 2e^(1/2))e^(-x²/2)

Thus, the solution to the given differential equation, subject to the given initial condition, is y = (1 + 2e^(1/2))e^(-x²/2).

To know more about the integrating factor method, visit:

brainly.com/question/32518016

#SPJ11

(a) The general solution to the differential equation y" + 4y = x sin(2x) is y(x) = c₁cos(2x) + c₂sin(2x) + (Ax + B) sin(2x) + (Cx + D) cos(2x), where c₁, c₂, A, B, C, and D are arbitrary constants. (b) The solution to the differential equation y' = 1 + 3y³ is given by y(x) = [integral of (1 + 3y³) dx] + C, where C is the constant of integration. (c) The general solution to the differential equation y" - 6y = 0 is [tex]y(x) = c_1e^{(√6x)} + c_2e^{(-√6x)}[/tex], where c₁ and c₂ are arbitrary constants.

(a) To solve the differential equation y" + 4y = x sin(2x), we can use the method of undetermined coefficients. The homogeneous solution to the associated homogeneous equation y" + 4y = 0 is given by y_h(x) = c₁cos(2x) + c₂sin(2x), where c₁ and c₂ are arbitrary constants. Finally, the general solution of the differential equation is y(x) = y_h(x) + y_p(x), where y_h(x) is the homogeneous solution and y_p(x) is the particular solution.

(b) To solve the differential equation y' = 1 + 3y³, we can separate the variables. We rewrite the equation as y' = 3y³ + 1 and then separate the variables by moving the y terms to one side and the x terms to the other side. This gives us:

dy/(3y³ + 1) = dx

(c) To solve the differential equation y" - 6y = 0, we can assume a solution of the form [tex]y(x) = e^{(rx)}[/tex], where r is a constant to be determined. Substituting this assumed solution into the differential equation, we obtain the characteristic equation r² - 6 = 0. Solving this quadratic equation for r, we find the roots r₁ = √6 and r₂ = -√6.

To know more about differential equation,

https://brainly.com/question/31483896

#SPJ11

Using the "S exchange" technique, Equation Two can be transformed into an additive equation by substituting the sigmoid function with a new variable. To prove the stability of the system described by the neural network equation, the eigenvalues of the weight matrix and the Lyapunov function need to be analyzed to ensure the system remains bounded and does not diverge.

To transform Equation Two into an additive equation, we can use the "S exchange" technique. By applying this method, the equation can be rewritten in an additive form. To prove the stability of the system described by the neural network equation, we need to demonstrate that any perturbation or change in the system's initial conditions will not cause the outputs to diverge or become unbounded.

(One) To transform Equation Two into an additive equation using the "S exchange" technique, we can substitute the sigmoid function $(a) with a new variable, let's say s. The sigmoid function can be approximated as s = (1 + e^(-a))^-1. By replacing $(a) with s, Equation Two becomes yi(t+1) = WijYj(t) + Oi * s. This reformulation allows us to express the equation in an additive form.

(Two) To prove the stability of this system, we need to show that it is Lyapunov stable. Lyapunov stability ensures that any small perturbation or change in the system's initial conditions will not cause the outputs to diverge or become unbounded. We can analyze the stability of the system by examining the eigenvalues of the weight matrix W. If all the eigenvalues have magnitudes less than 1, the system is stable. Additionally, the stability can be further assessed by analyzing the Lyapunov function, which measures the system's energy. If the Lyapunov function is negative definite or decreases over time, the system is stable. Proving the stability of this system involves a detailed analysis of the eigenvalues and the Lyapunov function, taking into account the specific values of A, Wij, and Oi in Equation Two.

Learn more about additive here: https://brainly.com/question/20687498

#SPJ11

The curve of the function 2x² has a local maximum at (0, 0) and no local minimum.

To find the local maximum and minimum of the function 2x², we need to analyze its first derivative. Let's differentiate 2x² with respect to x:

f'(x) = 4x

The critical points occur when the derivative is equal to zero or undefined. In this case, there are no critical points because the derivative, 4x, is defined for all values of x.

Since there are no critical points, there are no local minimum points either. The curve of the function 2x² only has a local maximum at (0, 0). At x = 0, the function reaches its highest point before decreasing on either side.

In summary, the curve of the function 2x² has a local maximum at (0, 0) and no local minimum. The absence of critical points indicates that the function continuously increases or decreases without any local minimum points.

Learn more about function here:

https://brainly.com/question/18958913

#SPJ11

A 3-regular simple connected graph with faces of degree 4 and 6 has exactly 6 squares.


Let F4 and F6 be the numbers of squares and hexagons, respectively, in the graph. According to Euler's formula, V - E + F = 2, where V, E, and F are the numbers of vertices, edges, and faces in the graph, respectively. Since each square has 4 edges and each hexagon has 6 edges, the number of edges can be expressed as 4F4 + 6F6.
Since the graph is 3-regular, each vertex is incident to 3 edges. Hence, the number of edges is also equal to 3V/2.  

By comparing these two expressions for the number of edges and using Euler's formula, we obtain 3V/2 = 4F4 + 6F6 + 6. Since V, F4, and F6 are all integers, it follows that 4F4 + 6F6 + 6 is even. Therefore, F4 is even.
Since each square has two hexagons as neighbors, each hexagon has two squares as neighbors, and the graph is connected, it follows that F4 = 2F6. Hence, F4 is a multiple of 4 and therefore must be at least 4. Therefore, the graph contains at least 2 squares.

Suppose that the graph contains k squares, where k is greater than or equal to 2. Then the total number of faces is 2k + (6k/2) = 5k, and the total number of edges is 3V/2 = 6k + 6.

By Euler's formula, we have V - (6k + 6) + 5k = 2, which implies that V = k + 4. But each vertex has degree 3, so the number of vertices must be a multiple of 3. Therefore, k must be a multiple of 3.
Since F4 = 2F6, it follows that k is even. Hence, the possible values of k are 2, 4, 6, ..., and the corresponding values of F4 are 4, 8, 12, ....

Since the graph is connected, it cannot contain more than k hexagons. Therefore, the maximum possible value of k is F6, which is equal to (3V - 12)/4.
Hence, k is at most (3V - 12)/8. Since k is even and at least 2, it follows that k is at most 6. Therefore, the graph contains exactly 6 squares.

Learn more about Euler's formula here:

https://brainly.com/question/12274716

#SPJ11

To find the inverse Laplace transform of the given functions, we need to decompose them into partial fractions and then use known Laplace transform formulas. Let's go through each function step by step.

F(s) = (4s + 32)/(s^2 - 16)

First, we need to factor the denominator:

s^2 - 16 = (s + 4)(s - 4)

We can express F(s) as:

F(s) = A/(s + 4) + B/(s - 4)

To find the values of A and B, we multiply both sides by the denominator:

4s + 32 = A(s - 4) + B(s + 4)

Expanding and equating coefficients, we have:

4s + 32 = (A + B)s + (-4A + 4B)

Equating the coefficients of s, we get:

4 = A + B

Equating the constant terms, we get:

32 = -4A + 4B

Solving this system of equations, we find:

A = 6

B = -2

Now, substituting these values back into F(s), we have:

F(s) = 6/(s + 4) - 2/(s - 4)

Taking the inverse Laplace transform, we can find f(t):

f(t) = 6e^(-4t) - 2e^(4t)

F(s) = (2s + 1)/(s^2 - 16)

Again, we need to factor the denominator:

s^2 - 16 = (s + 4)(s - 4)

We can express F(s) as:

F(s) = A/(s + 4) + B/(s - 4)

To find the values of A and B, we multiply both sides by the denominator:

2s + 1 = A(s - 4) + B(s + 4)

Expanding and equating coefficients, we have:

2s + 1 = (A + B)s + (-4A + 4B)

Equating the coefficients of s, we get:

2 = A + B

Equating the constant terms, we get:

1 = -4A + 4B

Solving this system of equations, we find:

A = -1/4

B = 9/4

Now, substituting these values back into F(s), we have:

F(s) = -1/(4(s + 4)) + 9/(4(s - 4))

Taking the inverse Laplace transform, we can find f(t):

f(t) = (-1/4)e^(-4t) + (9/4)e^(4t)

F(s) = (s + a)/(s^2 - s - 2)

We can express F(s) as:

F(s) = A/(s - 1) + B/(s + 2)

To find the values of A and B, we multiply both sides by the denominator:

s + a = A(s + 2) + B(s - 1)

Expanding and equating coefficients, we have:

s + a = (A + B)s + (2A - B)

Equating the coefficients of s, we get:

1 = A + B

Equating the constant terms, we get:

a = 2A - B

Solving this system of equations, we find:

A = (a + 1)/3

B = (2 - a)/3

Now, substituting these values back into F(s), we have:

F(s) = (a + 1)/(3(s - 1)) + (2 - a)/(3(s + 2))

Taking the inverse Laplace transform, we can find f(t):

f(t) = [(a + 1)/3]e^t + [(2 - a)/3]e^(-2t)

F(s) = s/(s^2 + 10s + 2)

We can express F(s) as:

F(s) = A/(s + a) + B/(s + b)

To find the values of A and B, we multiply both sides by the denominator:

s = A(s + b) + B(s + a)

Expanding and equating coefficients, we have:

s = (A + B)s + (aA + bB)

Equating the coefficients of s, we get:

1 = A + B

Equating the constant terms, we get:

0 = aA + bB

Solving this system of equations, we find:

A = -b/(a - b)

B = a/(a - b)

Now, substituting these values back into F(s), we have:

F(s) = -b/(a - b)/(s + a) + a/(a - b)/(s + b)

Taking the inverse Laplace transform, we can find f(t):

f(t) = [-b/(a - b)]e^(-at) + [a/(a - b)]e^(-bt)

These are the inverse Laplace transforms of the given functions.

Learn more about equations here:

https://brainly.com/question/29657983

#SPJ11

There are two possible coordinates for point P(a, 0) on the x-axis such that |PA| = |PB|: P(7, 0) and P(3, 0).

To find the coordinates of point P(a, 0) on the x-axis such that |PA| = |PB|, we need to find the value of 'a' that satisfies this condition.

Let's start by finding the distances between the points. The distance between two points (x1, y1) and (x2, y2) is given by the distance formula:

d = √((x2 - x1)² + (y2 - y1)²)

Using this formula, we can calculate the distances |PA| and |PB|:

|PA| = √((a - 5)² + (0 - 0)²) = √((a - 5)²)

|PB| = √((0 - 0)² + (2 - 0)²) = √(2²) = 2

According to the given condition, |PA| = |PB|, so we can equate the two expressions:

√((a - 5)²) = 2

To solve this equation, we need to square both sides to eliminate the square root:

(a - 5)² = 2²

(a - 5)² = 4

Taking the square root of both sides, we have:

a - 5 = ±√4

a - 5 = ±2

Solving for 'a' in both cases, we get two possible values:

Case 1: a - 5 = 2

a = 2 + 5

a = 7

Case 2: a - 5 = -2

a = -2 + 5

a = 3

Therefore, there are two possible coordinates for point P(a, 0) on the x-axis such that |PA| = |PB|: P(7, 0) and P(3, 0).

Learn more about coordinates here:

https://brainly.com/question/15300200

#SPJ11

In summary, when a lawnmower is pushed with a force of 100 N at an angle of 45° to the horizontal over a displacement of 600 m, the amount of work done is 42,426 J. This is calculated by multiplying the force, displacement, and the cosine of the angle between the force and displacement vectors using the formula for work.

The amount of work done when a lawnmower is pushed can be calculated by multiplying the magnitude of the force applied with the displacement of the lawnmower. In this case, a force of 100 N is applied at an angle of 45° to the horizontal, resulting in a displacement of 600 m. By calculating the dot product of the force vector and the displacement vector, the work done can be determined.

To elaborate, the work done is given by the formula W = F * d * cos(θ), where F is the magnitude of the force, d is the displacement, and θ is the angle between the force vector and the displacement vector. In this scenario, the force is 100 N, the displacement is 600 m, and the angle is 45°. Substituting these values into the formula, we have W = 100 N * 600 m * cos(45°). Evaluating the expression, the work done is found to be 42,426 J.

To learn more about dot product, click here:

brainly.com/question/23477017

#SPJ11