The triangle shown on the graph above is rotated 90 degrees clockwise about the original to form triangle P’Q’R which of the following are the (x,y) coordinates of the point P’

Answer:

Step-by-step explanation:

Equation of a circle is given by

( x - h)² + ( y - k)² = r²

where r is the radius and

( h , k) is the center of the circle

From the question the radius R = 1/3

the center ( h ,k ) = (4/3 , -8/3)

Substituting the values into the above equation

We have

[tex](x - \frac{4}{3} )^{2} + {(y - - \frac{8}{3}) }^{2} = ({ \frac{1}{3} })^{2} [/tex]

We have the final answer as

[tex](x - \frac{4}{3} )^{2} + {(y + \frac{8}{3}) }^{2} = \frac{1}{9} [/tex]

Hope this helps you

Answer:

All units of measurement that are not based on or do not measure mass or weight and volume are incommensurable with kilograms.

Step-by-step explanation:

A measure unit is said to be incommensurable with another if it does not have the same measurement basis with the other measure unit.  For example, a measure in time cannot be measured in kilograms because time is measured in hours, minutes, seconds, days, etc.  But, if a measurement base can be applied to two or more measurement units, then the measurement units are commensurable with the measurement base.

Answer:

q =  5000/x  + 6

Step-by-step explanation:

D´= dq/dx  =  - 5000/x²

dq = -( 5000/x²)*dx

Integrating on both sides of the equation we get:

q = -5000*∫ 1/x²) *dx

q = 5000/x + K   in this equation x is the price per unit and q demanded quantity and K integration constant

If when  1006 units are demanded when the rice is 5 then

x = 5     and   q = 1006

1006  =  5000/5 +K

1006 - 1000 = K

K = 6

Then the demand function is:

q =  5000/x  + 6

Answer:

There is a positive correlation between X and Y.

Step-by-step explanation:

The estimated regression equation is:

[tex]\hat Y=20X+200[/tex]

The general form of a regression equation is:

[tex]\hat Y=b_{yx}X+a[/tex]

Here, [tex]b_{yx}[/tex] is the slope of a line of Y on X.

The formula of slope is:

[tex]b_{yx}=r(X,Y)\cdot \frac{\sigma_{y}}{\sigma_{x}}[/tex]

Here r (X, Y) is the correlation coefficient between X and Y.

The correlation coefficient is directly related to the slope.

And since the standard deviations are always positive, the sign of the slope is dependent upon the sign of the correlation coefficient.

Here the slope is positive.

This implies that the correlation coefficient must have been a positive values.

Thus, it can be concluded that there is a positive correlation between X and Y.

Answer:

0.00114

Step-by-step explanation:

Divide length value by 5280

Answer:

135 degrees

Step-by-step explanation:

3x+15 = 5x - 5 because of the alternate interior angles theorem.

20 = 2x

x = 10

3(10) + 15 = 30+15 = 45

Remember that a line has a measure of 180 degrees. So we can just subtract the angle we found from 180 degrees to get BFG.

180-45 = 135.

Answer:

2^11

Step-by-step explanation:

since the bases are the same, we can add the exponents

a^b * a^c = a^(b+c)

2^6 * 2^5

2^(6+5)

2^11

Answer:

Three

Step-by-step explanation:

Assuming the grade score from 70 to 100 is A; for grade score from 60 to 69 is B and grade score from 50 to 59 is C. Well it is certain there are three peaks in the distribution of scores

Answer: There are 15 friends.

Step-by-step explanation:

We know that there is N friends (N is the number that we are looking for)

Each friend weights 1/20 ton.

Now, the weight of the N friends together is N times 1/20 ton.

Then we have:

N*(1/20) ton = 3/4 ton

We solve this for N.

First multiply both sides by 20.

20*N*(1/20) = N = 20*(3/4) = 60/4 = 15

Answer:

I can find the total number of people by dividing the total weight by the weight of one person.

Step-by-step explanation:

Answer:

4

Step-by-step explanation:

"4" is the number of variable terms that are in the expression 3x3y + 5x2 _ 4y + z + 9. The four variable terms in the expression are "xy", "x^2", "y" and "z". I hope that this is the answer that you were looking for and the answer has actually come to your desired help. If you need any clarification, you can always ask.

The normal vector to the plane x + 3y + z = 5 is n = (1, 3, 1). The line we want is parallel to this normal vector.

Scale this normal vector by any real number t to get the equation of the line through the point (1, 3, 1) and the origin, then translate it by the vector (1, 0, 6) to get the equation of the line we want:

(1, 0, 6) + (1, 3, 1)t = (1 + t, 3t, 6 + t)

This is the vector equation; getting the parametric form is just a matter of delineating

x(t) = 1 + t

y(t) = 3t

z(t) = 6 + t

The vector equation for the line through the point (1,0,6) and perpendicular to the plane x+3y+z=5 is v =(1+t)i + (3t)j + (6+t)k

The parametric equations for the line through the point (1,0,6) and perpendicular to the plane x+3y+z=5

The parametric equation of a line through the point A(x, y, z) perpendicular to the plane ax+by+cz= d is expressed generally as:

A + vt where:

A = (x, y, z)

v = (a, b, c) (normal vector)

This can then be expressed as:

s = A + vt

s = (x, y, z) + (a, b, c)t

Given the point

(x, y, z) = (1,0,6)

(a, b, c) = (1, 3, 1)

Substitute the given coordinate into the equation above:

s = (1,0,6) + (1, 3, 1)t

s = (1+t) + (0+3t) + (6+t)

The parametric equations from the equation above are:

x(t) = 1+t

y(t) = 3t

z(t) = 6+t

The vector equation will be expressed as v = xi + yj + zk

v =(1+t)i + (3t)j + (6+t)k

Learn more here: brainly.com/question/12850672

Answer:

As the calculated value of t is greater than critical value reject H0. The tests supports the claim at ∝= 0.05

If the p-value for the test statistic for this hypothesis test is 0.014, then the critical region is t ( with df=9) for a right tailed test is 2.821

then we would accept H0. The test would not support the claim at ∝= 0.01

Step-by-step explanation:

Mean x`= 518 +548 +561 +523 + 536 + 499+  538 + 557+ 528 +563 /10

x`= 537.1

The Variance is  = 20.70

H0 μ≤ 520

Ha μ > 520

Significance level is set at ∝= 0.05

The critical region is t ( with df=9) for a right tailed test is 1.8331

The test statistic under H0 is

t=x`- x/ s/ √n

Which has t distribution with n-1 degrees of freedom which is equal to 9

t=x`- x/ s/ √n

t = 537.1- 520 / 20.7 / √10

t= 17.1 / 20.7/ 3.16227

t= 17.1/ 6.5459

t= 2.6122

As the calculated value of t is greater than critical value reject H0. The tests supports the claim at ∝= 0.05

If the p-value for the test statistic for this hypothesis test is 0.014, then the critical region is t ( with df=9) for a right tailed test is 2.821

then we would accept H0. The test would not support the claim at ∝= 0.01

Answer:

256 outcomes.

Step-by-step explanation:

Each time you flip the coin you have two possible outcomes, it can either come up with heads or tails.

You're going to flip the coin eight times so the first time you can have 2 possible outcomes, the second time you have 2 possible outcomes, the third time you have 2 possible outcomes, etc.

Since you are going to do this eight times you are going to multiply each of the outcomes, so you will have:

Possible outcomes = 2×2×2×2×2×2×2×2= 256

Thus, there are 256 different outcomes in total.

Answer:

Step-by-step explanation:

50 : 10 = 5 speaks French only

50 -5= 45 the remainder

4/5 * 45= 36 speaks French and English

45 - 36= 9 speaks English only

The number of students who speak:

i) French only = 5 students,

ii) both French and English = 36 students,

iii) English only = 9 students.

Step 1: Find the number of students who speak French only.

Step 2: Find the remainder (students who speak both French and English) after subtracting the French-only speakers.

Step 3: Find the number of students who speak both French and English.

Step 4: Find the number of students who speak English only.

Let's calculate it step by step:

Step 1: Find the number of students who speak French only.

1/10 of 50 pupils speak French only:

French-only speakers = (1/10) * 50 = 5 students.

Step 2: Find the remainder (students who speak both French and English) after subtracting the French-only speakers.

Remaining students = Total students - French-only speakers

Remaining students = 50 - 5 = 45 students.

Step 3: Find the number of students who speak both French and English.

4/5 of the remaining students speak both French and English:

Both French and English speakers = (4/5) * 45 = 36 students.

Step 4: Find the number of students who speak English only.

To find the English-only speakers, subtract the total number of French-only speakers and both French and English speakers from the total number of students:

English-only speakers = Total students - (French-only speakers + Both French and English speakers)

English-only speakers = 50 - (5 + 36) = 50 - 41 = 9 students.

To know more about French:

https://brainly.com/question/34246494

#SPJ2

Complete question is:

There are 50 pupils in a class. Out of this number, 1/10 speak French only and 4/5 of the remainder speak both French and English. If the rest speak English only, find the number of students who speak​

i) French only,

ii) both French and English,

iii) English only,

Answer:

x^2 +4y +z = 1

Step-by-step explanation:

Surface consisting of all points P to point (0,1,0) been equal to the plane y =1

given point, p (x,y,z ) the distance from P to the plane (y)

| y -1 |

attached is the remaining part of the solution

Answer:

c = 468 / 13

Step-by-step explanation:

If c is the number of cans of soda in each case, we know that the number of cans in 13 cases is 13 * c = 13c, and since the number of cans in 13 cases is 468 and we know that "is" denotes that we need to use the "=" sign, the equation is 13c = 468. To get rid of the 13, we need to divide both sides of the equation by 13 because division is the opposite of multiplication, therefore the answer is c = 468 / 13.

Answer:

468/13 = c

Step-by-step explanation: Further explanation :

[tex]13 \:cases = 468\:cans\\1 \:case\:\:\:\:= c\: cans\\Cross\:Multiply \\\\13x = 468\\\\\frac{13x}{13} = \frac{468}{13} \\\\c = 36\: cans[/tex]

Answer:

20 cm

Step-by-step explanation:

20 cm

8/2 = 4

6/2 = 3

3 and 4 are the sides of the triangle (four triangles in rhombus)

a²+b²=c²

4³+3²=c²

c = 5

5 x 4 = 20

Hope this helped

Answer:

perimeter = 20 cm

Step-by-step explanation:

consider breaking the rhombus into four equal parts.

and that gives you a triangle.

(refer to image attached for more clarification)

let a = 3, b = 4

to get the side c, use Pythagorean theorem = c² = a² + b²

c = sqrt (3² + 4²)

side c = 5

therefore,

perimeter = 4 x sides (c)

perimeter = 4 x 5

perimeter = 20 cm

Answer:

40.63

Step-by-step explanation:

31.25+9.38= 40.63

Hope this helps

Answer: 40.63

Look at the image for shown work.

Answer:

-9

Step-by-step explanation:

4 + (-13)

=> 4 - 13

=> -9

Answer:

Thus percentile lies between 53.3% and 55.6 %

Step-by-step explanation:

First we arrange the data in ascending order . Then find the number of the values corresponding to the given value. Then equate it with the number of observations and x and then multiply it to get the percentile. n= P/100 *N

where n is the ordinal rank of the given value

N is the number of values in ascending order.

The data in ascending order is

0.1 0.2 0.2 0.2 0.3 0.6 0.6 0.6 0.7 0.8 0.8 0.8 0.9 1.3

1.5 1.7 1.9 2.2 2.3 2.3 2.6 2.8 3.3 3.5 5.5 6.1 6.4 6.9 7.5 7.9 8.3 9.8 10.1 11.8 11.9 12.1 12.3 12.7 12.9 13.8 13.8 14.6 14.7 14.8 27.5

Number of observation = 45

4.9 lies between 3.3 and 5.5

x*n = 24 observation x*n = 25 observation

x*45= 24 x*45= 25

x= 0.533 x= 0.556

Thus percentile lies between 53.3% and 55.6 %

━━━━━━━☆☆━━━━━━━

▹ Answer

x = 5

▹ Step-by-Step Explanation

The x-axis and y-axis are labeled on the graph. The x-axis is the horizontal axis. Between 4 and 6, there is a missing number. That number should be 5, leaving us with an x-value of 5 for Point A.

Hope this helps!

CloutAnswers ❁

━━━━━━━☆☆━━━━━━━

Answer:

The x value is 5

Step-by-step explanation:

The x value is the value going across

Starting where the two axis meet, we go 5 units to the right

That is the x value

Answer:

  6

Step-by-step explanation:

Jana had a total of 3+3+3+3 = 12 muffins. Half that number is 3+3 = 6 muffins.

Jana put 6 muffins on the plate.

Answer:

Shawn is correct because two events are independent if the probability of both occurring is equal to the product of the probabilities of the two events.

Step-by-step explanation:

We are given that A represent going to the movies on Friday and let B represent going bowling on Friday night. The P(A) = 0.58 and the P(B) = 0.36. The P(A and B) = 94%.

Now, it is stated that the two events are independent only if the product of the probability of the happening of each event is equal to the probability of occurring of both events.

This means that the two events A and B are independent if;

P(A) [tex]\times[/tex] P(B) = P(A and B)

Here, P(A) = 0.58, P(B) = 0.36, and P(A and B) = 0.94

So, P(A) [tex]\times[/tex] P(B) [tex]\neq[/tex] P(A and B)

      0.58 [tex]\times[/tex] 0.36 [tex]\neq[/tex] 0.94

This shows that event a and event B are not independent.

So, the Shawn statement that both events are not independent because P(A)P(B) ≠ P(A and B) is correct.

Answer:

Shawn is correct

Step-by-step explanation:

Answer:

[tex]B' = (-96,-24)[/tex]

Step-by-step explanation:

Given

[tex]A(0,6)[/tex]

[tex]B(-8,-2)[/tex]

[tex]C(8,-2)[/tex]

Required

Determine the coordinates of B' if dilated by a scale factor of 12

The new coordinates of a dilated coordinates can be calculated using the following formula;

New Coordinates = Old Coordinates * Scale Factor

So;

[tex]B' = B * 12[/tex]

Substitute (-8,-2) for B

[tex]B' = (-8,-2) * 12[/tex]

Open Bracket

[tex]B' = (-8 * 12,-2 * 12)[/tex]

[tex]B' = (-96,-24)[/tex]

Hence the coordinates of B' is [tex]B' = (-96,-24)[/tex]

Answer:

Bit late but the answer is (-4,-1)

Step-by-step explanation:

Took the test in k12

Answer:

[tex]p(x)[/tex] and [tex]q(x)[/tex] have the same domain and the same range.

Step-by-step explanation:

[tex]p(x) = 6-x[/tex] and

[tex]q(x) = 6x[/tex]

First of all, let us have a look at the definition of domain and range.

Domain of a function [tex]y =f(x)[/tex] is the set of input value i.e. the value of [tex]x[/tex] for which the function [tex]f(x)[/tex] is defined.

Range of a function [tex]y =f(x)[/tex] is the set of output value i.e. the value of [tex]y[/tex] or [tex]f(x)[/tex] for the values of [tex]x[/tex] in the domain.

Now, let us consider the given functions one by one:

[tex]p(x) = 6-x[/tex]

Let us sketch the graph of given function.

Please find attached graph.

There are no values of [tex]x[/tex] for which p(x) is not defined so domain is All real numbers.

So, domain is [tex](-\infty, \infty)[/tex] or [tex]x\in R[/tex]

Its range is also All Real Numbers

So, Range is [tex](-\infty, \infty)[/tex] or [tex]x\in R[/tex]

[tex]q(x) = 6x[/tex]

Let us sketch the graph of given function.

Please find attached graph.

There are no values of [tex]x[/tex] for which [tex]q(x)[/tex] is not defined so domain is All real numbers.

So, domain is [tex](-\infty, \infty)[/tex] or [tex]x\in R[/tex]

Its range is also All Real Numbers

So, Range is [tex](-\infty, \infty)[/tex] or [tex]x\in R[/tex]

Hence, the correct answer is:

[tex]p(x)[/tex] and [tex]q(x)[/tex] have the same domain and the same range.

Answer:

To evaluate an algebraic expression, you have to substitute a number for each variable and perform the arithmetic operations. In the example above, the variable x is equal to 6 since 6 + 6 = 12. If we know the value of our variables, we can replace the variables with their values and then evaluate the expression.

Step-by-step explanation:

Evaluate Algebraic Expressions. ... To evaluate an algebraic expression means to find the value of the expression when the variable is replaced by a given number. To evaluate an expression, we substitute the given number for the variable in the expression and then simplify the expression using the order of operations.

Answer:

1, 7

Step-by-step explanation:

Because the product is 0, either (x-1) or (x-7) is equal to 0. That means that x = 1, or 7

Answer:

the probability the die chosen was green is 0.9

Step-by-step explanation:

Given that:

A bag contains two six-sided dice: one red, one green.

The red die has faces numbered 1, 2, 3, 4, 5, and 6.

The green die has faces numbered 1, 2, 3, 4, 4, and 4.

From above, the probability of obtaining 4 in a single throw of a fair die is:

P (4  | red dice) = [tex]\dfrac{1}{6}[/tex]

P (4 | green dice) = [tex]\dfrac{3}{6}[/tex] =[tex]\dfrac{1}{2}[/tex]

A die is selected at random and rolled four times.

As the die is selected randomly; the probability of the first die must be equal to the probability of the second die = [tex]\dfrac{1}{2}[/tex]

The probability of two 1's and two 4's in the first dice can be calculated as:

= [tex]\begin {pmatrix} \left \begin{array}{c}4\\2\\ \end{array} \right \end {pmatrix} \times \begin {pmatrix} \dfrac{1}{6} \end {pmatrix} ^4[/tex]

= [tex]\dfrac{4!}{2!(4-2)!} ( \dfrac{1}{6})^4[/tex]

= [tex]\dfrac{4!}{2!(2)!} \times ( \dfrac{1}{6})^4[/tex]

= [tex]6 \times ( \dfrac{1}{6})^4[/tex]

= [tex](\dfrac{1}{6})^3[/tex]

= [tex]\dfrac{1}{216}[/tex]

The probability of two 1's and two 4's in the second  dice can be calculated as:

= [tex]\begin {pmatrix} \left \begin{array}{c}4\\2\\ \end{array} \right \end {pmatrix} \times \begin {pmatrix} \dfrac{1}{6} \end {pmatrix} ^2 \times \begin {pmatrix} \dfrac{3}{6} \end {pmatrix} ^2[/tex]

= [tex]\dfrac{4!}{2!(2)!} \times ( \dfrac{1}{6})^2 \times ( \dfrac{3}{6})^2[/tex]

= [tex]6 \times ( \dfrac{1}{6})^2 \times ( \dfrac{3}{6})^2[/tex]

= [tex]( \dfrac{1}{6}) \times ( \dfrac{3}{6})^2[/tex]

= [tex]\dfrac{9}{216}[/tex]

∴

The probability of two 1's and two 4's in both dies = P( two 1s and two 4s | first dice ) P( first dice ) + P( two 1s and two 4s | second dice ) P( second dice )

The probability of two 1's and two 4's in both die = [tex]\dfrac{1}{216} \times \dfrac{1}{2} + \dfrac{9}{216} \times \dfrac{1}{2}[/tex]

The probability of two 1's and two 4's in both die = [tex]\dfrac{1}{432} + \dfrac{1}{48}[/tex]

The probability of two 1's and two 4's in both die = [tex]\dfrac{5}{216}[/tex]

By applying  Bayes Theorem; the probability that the die was green can be calculated as:

P(second die (green) | two 1's and two 4's )  = The probability of two 1's and two 4's | second dice)P (second die) ÷ P(two 1's and two 4's in both die)

P(second die (green) | two 1's and two 4's )  = [tex]\dfrac{\dfrac{1}{2} \times \dfrac{9}{216}}{\dfrac{5}{216}}[/tex]

P(second die (green) | two 1's and two 4's )  = [tex]\dfrac{0.5 \times 0.04166666667}{0.02314814815}[/tex]

P(second die (green) | two 1's and two 4's )  = 0.9

Thus; the probability the die chosen was green is 0.9

Answer:

B) 5

Step-by-step explanation:

Proportions:

8 ⇒ 10

20 ⇒ 5x

5x = 20*10/8

5x = 25

x = 25/5

x = 5