the velocity v of an earth satellite varies directly as the square root of its mass m, and inversely as the square root of its distance r from the center of earth. if the mass is halved and the distance is doubled, how is the speed affected

The center of mass of the two-car system can be found by taking the weighted average of the velocities of the two cars.

The velocity of the center of mass is the average of the two cars' velocities, weighted by their masses. The velocity of the center of mass is:

Velocity of Center of Mass = (1.27 x 103 kg x 11.6 m/s + 1.70 x 103 kg x 11.6 m/s) / (1.27 x 103 kg + 1.70 x 103 kg) = 11.60 m/s.

Read more about the topic velocity:

https://brainly.com/question/80295?source=archive

#SPJ11

Answer:

i actually giggled at that oml.

Explanation:

that was good

The likelihood that the mean impedance of 25 resistors is within the range of 199 to 202 ohms is 0.842, as per the principle of probability.

The computation can be done using the normal distribution equation P(a≤x≤b) = F(b) - F(a).

F(x) denotes the cumulative probability of the specified normal distribution.

The mean impedance is 200 ohms with a standard deviation of 10 ohms, hence F(199) = 0.155 and F(202) = 0.997. Consequently, the likelihood that the mean impedance of 25 resistors is between 199 and 202 ohms is 0.997 - 0.155 = 0.842.

The probability that the total impedance will be below 5100 ohms is 0.999. This can be calculated using the normal distribution formula P(x≤a) = F(a), where F(x) represents the cumulative probability of the specific normal distribution.

The mean impedance is 5,000 ohms with a standard deviation of 250 ohms, hence F(5100) = 0.999. Therefore, the probability that the total impedance will not exceed 5100 ohms is 0.999.

To learn more about the probability of mean resistance, visit: Brainly.com/question/18650146

#SPJ11

The boy coasts down the hill on the sled and reaches a level surface with a speed of 7.2 m/s. The coefficient of friction between the sled's runners and the snow is 0.055, and the boy and sled together weigh 540 N. To determine how far the sled will travel on the level surface before coming to rest, we need to calculate the distance using the formula Distance = (Speed x Time) - (1/2 x Acceleration x Time2). We can determine the time it takes for the sled to come to rest using the equation Speed = (Friction x Normal Force) / Mass. So, Speed = (0.055 x 540N) / 540N = 0.055 m/s. Time = 7.2/0.055 = 130.9 seconds. We can then calculate the distance as Distance = (7.2 x 130.9) - (1/2 x 0.055 x 130.92) = 927.9 m. Therefore, the sled will travel 927.9 m before coming to rest.

The boy and sled weigh 540 N. A boy coasts down a hill on a sled, reaching a level surface at the bottom with a speed of 7.2 m/s. The coefficient of friction between the sled's runners and snow is 0.055. How far does the sled travel on the level surface before coming to rest?

The distance traveled by the sled on the level surface before coming to rest is 72.22 meters.

What is friction?

Friction is a force that opposes motion. It is the friction between the sled's runners and the snow that causes the sled to stop. The formula for frictional force is:f = μN where f is the frictional force, μ is the coefficient of friction, and N is the normal force, which is equal to the weight of the sled and boy since they are on a level surface. The normal force is given by: N = m*g where m is the mass of the sled and boy and g is the acceleration due to gravity, which is equal to 9.81 m/s^2.

How far does the sled travel on the level surface before coming to rest?

The sled will travel a certain distance, d, before it stops. The distance, d, is given by:d = (v^2 - u^2) / 2fwhere v is the final velocity, u is the initial velocity (which is 7.2 m/s), and f is the frictional force. The frictional force is f = μN = μmgSubstituting the given values:d = (7.2∧2 - 0∧2) / (2*0.055*540*9.81)d = 72.22 meters. Therefore, the sled will travel 72.22 meters on the level surface before coming to rest.

For more information follow this link: https://brainly.com/question/28224010

#SPJ11

Answer:

Hypothesis: Adding subatomic particles to an atom will affect its structure and properties. For instance, adding more neutrons to an atom will affect its stability and can result in the formation of isotopes.

The hypothesis is correct. Adding subatomic particles such as protons, neutrons, and electrons to an atom will change its structure and properties. The number of protons determines the atomic number and the identity of the element. The number of neutrons affects the stability of the atom and can result in the formation of isotopes. Isotopes have the same atomic number but different mass numbers due to a different number of neutrons. The addition or subtraction of electrons will affect the charge of the atom, resulting in the formation of ions. Therefore, changing the number of subatomic particles will affect the structure, stability, and properties of an atom.

Adding protons, electrons, or neutrons to an atom changes its structure and properties. Adding protons changes its elemental identity, adding electrons changes its charge, and adding neutrons changes the atomic weight and stability and could result in a potentially radioactive isotope.

Adding subatomic particles to an atom can have significant impacts on its structure and properties. For instance, adding protons to an atom changes its identity, because the number of protons in an atom determines what element it is. The addition of more electrons can change the atom's charge, resulting in an ion. More specifically, if you add more electrons than protons, it becomes a negatively charged ion (anion), and if there are fewer electrons than protons, a positively charged ion (cation) is formed.

Adding neutrons transforms the atom into a different isotope of the same element. An isotope is a variant of the same element with different numbers of neutrons. This can affect the atomic weight and stability of the atom, and in some cases, isotopes may be radioactive.

https://brainly.com/question/32192242

#SPJ2

A magnetic field created by the electric current causes the compass needle to move. This is the most likely outcome when a magnetic compass is placed adjacent to a basic electrical circuit consisting of a battery, a light bulb, and a wire.

A magnetic field is created around a wire as electricity flows through it. The compass needle moves as a result of the interaction between this magnetic field and the Earth's magnetic field. Consequently, the magnetic field produced by the electric current in the wire causes the compass needle to move when a magnetic compass is put next to a basic circuit comprised of a battery, a light bulb, and a wire. The interplay of magnetic fields and electric currents is employed in numerous applications, such as electric motors and generators, to transform electrical energy into mechanical energy and vice versa.

learn more about magnetic compass here:

https://brainly.com/question/2264542

#SPJ4

The given frequency of a microwave oven is 2.90 GHz. We have to find the wavelength of the radiation produced by this appliance. The speed of light is a constant value of 3 x 108 m/s. The relation between frequency and wavelength of electromagnetic radiation is given by:

c = fλ

Where,

We can rearrange this equation to get the formula for wavelength:

λ = c / f

Substituting the given values, we get:

Therefore, the wavelength of the radiation produced by the microwave oven is 10.34 cm.

Learn more about microwave oven: https://brainly.com/question/3164926

#SPJ11

If the current is running from west to east, then the direction of the force that our planet's magnetic field exerts on the cord is from south to north directions and The magnitude of the magnetic force is about 0.825 Newtons.

If the current is running from west to east, then the direction of the force that our planet's magnetic field exerts on the cord is from south to north. The magnitude of the force is given by the equation F = B × I × L, where B is the magnetic field strength, I is the current, and L is the length of the wire. In this case, the magnitude of the force is 0.825 N.
If the current is running vertically upward, then the direction of the force that our planet's magnetic field exerts on the cord is from east to west.

The magnitude of the force is again given by the equation F = B × I × L, so the magnitude of the force is 0.825 N.
If the current is running from north to south, then the direction of the force that our planet's magnetic field exerts on the cord is from west to east.
The magnitude of the force is again 0.825 N. The magnetic force is not large enough to cause significant effects under normal household conditions.

Learn more about Magnetic force here:

https://brainly.com/question/3160109

#SPJ11

X-rays have more energy than visible light and can pass through the human body.

X-rays are a type of electromagnetic radiation that has a shorter wavelength and higher frequency than visible light. Due to their high energy, X-rays can penetrate solid objects, including the human body. This property makes X-rays useful in medical imaging, such as X-ray radiography, computed tomography (CT) scans, and mammography.

When X-rays pass through the human body, they can be absorbed by the tissues or pass through, depending on the density of the material. Bones, for example, absorb more X-rays than soft tissues like muscle or fat, which is why they appear white in X-ray images.

While X-rays can be helpful in diagnosing medical conditions, they can also be harmful if exposure is not limited or controlled. Prolonged exposure to X-rays can damage DNA and potentially lead to cancer or other health problems.

For more similar questions on "soft tissues"

brainly.com/question/26135103

#SPJ11

The magnitude of the acceleration of the elevator is approximately 0.84 m/s².

When you stand on a bathroom scale in an elevator, it says your mass is 76 kg. Your actual mass is 70 kg.

Thus, the apparent weight of an object on the scale is the product of the object's mass and the net force acting on it. The scale reads a greater mass because of the upward force the elevator floor exerts on you.

The magnitude of the acceleration of the elevator is provided by the following formula:

The magnitude of the acceleration of the elevator = F_net/m,

where F_net is the net force on the object and m is the object's mass.

Since your actual mass is 70 kg and the scale measures an apparent mass of 76 kg, the net force acting on you is the difference between the apparent weight and the actual weight, which is given by

F_net = (76 kg - 70 kg) by × 9.8 m/s²

= 58.8 N

Thus, the magnitude of the acceleration of the elevator is: the magnitude of the acceleration of the elevator

= F_net/m = 58.8 N/70 kg

≈ 0.84 m/s²

Therefore, the magnitude of the acceleration of the elevator is approximately 0.84 m/s².

Learn more about the magnitude of the acceleration here:

https://brainly.com/question/29678420

#SPJ11

The volume of the mechanical room is 1000 cubic feet

To calculate the volume of space in a mechanical room, given that a 36,000 btu/hr water heater and 120,000 furnace btu/hr (both cat i appliances) will be installed in a 10' x 10' x 10' room size, use the following formula:

Volume = Room Length x Room Width x Room Height

The volume of space in the mechanical room is given as follows:

Volume = 10' x 10' x 10'

Volume = 1000 cubic feet (cu ft)

Therefore, the volume of space in the mechanical room is 1000 cubic feet (cu ft).

Learn more about the volume of space room at https://brainly.com/question/26491581

#SPJ11

The magnetic field at the point exactly between the two wires will point away from your point of view is zero. The correct option is C.

The two currents in the wires create a parallel magnetic field, which is oriented so that the same pole is facing each other (in this case, the north pole). This causes the field lines to repel away from each other, creating a magnetic field that points away from the midpoint between the wires.

The magnetic field at the point exactly between the two wires is zero. Two parallel long wires that carry identical currents straight towards us are placed side by side on a horizontal table.

As a result, the net magnetic field is zero.

Therefore, the correct option is C.

Read more about magnetic field here:

https://brainly.com/question/14411049

#SPJ11

Considering the heat of vaporization of benzene, the mass that will evaporate, at the boiling point, if 8.44 kJ/g of heat is extracted is 21.36 g.

Given the heat of vaporization of benzene, 395 J/g and the heat removed, 8.44 kJ, we can determine the mass of benzene that condenses by converting the heat removed to J/g as follows:

Qv = 8.44 kJ/g · 1000 J / 1 kJ = 8440 J/g

Hence, mass of benzene that condenses can be found by dividing the heat removed by the heat of vaporization as shown:

mass = heat removed / heat of vaporization

m = 8440 J/g / 395 J/g

m = 21.36 g

Therefore, 21.39 g of benzene will condense at its boiling point if 8.44 kJ is removed.

See more about heat of vaporization at https://brainly.com/question/26306578.

#SPJ11

Answer:

Approximately [tex]705\; {\rm m}[/tex].

Explanation:

Let [tex]x[/tex] denote the distance travelled before the plane takes off.

Let [tex]u[/tex] denote the initial velocity of the plane, and let [tex]v[/tex] denote the velocity of the plane when it takes off. It is given that the takeoff speed is [tex]v = 65\; {\rm m\cdot s^{-1}}[/tex]. Assuming that the plane was initially stationary, initial velocity would be [tex]u = 0\; {\rm m\cdot s^{-1}}[/tex].

It is given that the acceleration of the plane would be [tex]a = 3\; {\rm m\cdot s^{-2}}[/tex].

Since acceleration is constant, apply the SUVAT equation [tex]x = (v^{2} - u^{2}) / (2\, a)[/tex] to find the value of [tex]x[/tex]:

[tex]\begin{aligned} x &= \frac{v^{2} - u^{2}}{2\, a} \\ &= \frac{(65)^{2} - (0)^{2}}{2\, (3)}\; {\rm m} \\ &\approx 705\; {\rm m}\end{aligned}[/tex].

(Rounded up.)

Hence, the length of the runway should be at least [tex]705\; {\rm m}[/tex].

An electron must absorb a photon of energy in order to go up an atom's levels. The electron gains energy as a result and jumps to a higher energy level.

An electron in an atom must absorb a photon of energy equal to the energy difference between the two levels in order to go from one level of energy to another. Excitation is the term for this action. The electron is elevated to a higher energy level after absorbing the photon. The electron will swiftly revert to its initial energy level, producing a photon with an energy equal to the difference between the two levels, as this is an unstable condition. A photon is released as a result of this procedure, which is also known as de-excitation or relaxation. Instruments that can detect this photon can be used to examine the energy levels of atoms.

learn more about electron here:

https://brainly.com/question/1255220

#SPJ4

The speed of the resulting blob of clay is 20.99 m/s  and the direction is 45.82⁰ below the horizontal.

Given :

Masses of balls of clay:

m₁ = 60g,

m₂ =20g,

m₃ = 30g.

Speed of balls of clay :

v₁ = 40m/s,

v₂= 2m/s,

v₃ = 2.9m/s

we can write the speed in vector form as :

υ₁  = 40( x + y)/ √2 m/s,

υ₂ = 2 y m/s,

υ₃ = 2.9 (-y) m/s, where x and y are unit vectors in perpendicular directions.

During a collision, the momentum remains conserved. Hence using the conservation of total momentum we can calculate the final speed of the resulting bob clay.

Using conservation of momentum,

initial momentum = final momentum

m₁υ₁ +  m₂υ₂ + m₃υ₃ = (m₁+m₂+m₂)υ,

where υ = final velocity of clay blob.

Putting all the values in the above equation,

60 × 40( x + y)/ √2 + 20×2 y+30 ×2.9 (-y) = (60+20+30) υ

on solving the above equation, we get

υ = 14.63 x + 15.06 y

The magnitude of the final speed will be equal to √(14.63²+ 15.06²)

Final speed= 20.99 m/s.

and

Angle = tan⁻(15.06/14.63)

Angle = 45.82⁰ below the horizontal.

Therefore, the speed of the resulting blob of clay is 20.99 m/s  and the direction is 45.82⁰ below the horizontal.

To learn more about momentum, click here :

https://brainly.com/question/17166755

#SPJ12

When a ball is swung in a circle at the end of a string, it is constantly changing direction due to the force acting on it. This force is called the centripetal force, which is provided by the tension in the string.

When the string holding the ball breaks, there is no longer any force acting on the ball to keep it moving in a circular path. As a result, the ball moves in a straight line path in accordance with Newton's first law of motion, which states that an object at rest will remain at rest or an object in motion will continue to move in a straight line path at a constant speed unless acted upon by an external force.

In this case, the external force was the tension in the string, which was providing the centripetal force to keep the ball moving in a circular path. Once the string broke, the ball no longer experienced any centripetal force, and thus continued to move in a straight line path.

To learn more about centripetal force refer to:

brainly.com/question/11324711

#SPJ4

The image of the stamp when a magnifying glass with focal length 15 cm is placed 10 cm above a stamp is located 30 cm above the magnifying glass. The correct answer is Option C.

Let the object distance, u be -10cm (since the stamp is placed 10 cm above the magnifying glass).

Let the focal length of the lens, f be 15cm.

So, the magnification, m is given as:

m = v/u (where v is the image distance)

Using the lens formula, we can say that:

1/f = 1/v - 1/u (where v is the image distance and u is the object distance)

Plugging in the given values into the formula we have:

1/15 = 1/v + 1/10

Multiplying both sides of the equation by 30v, we have:

2v = 3(30 - v)

Solving for v, we have:

v = 30/2 = 15 cm

Since v is positive, it means that the image of the stamp is formed on the other side of the lens (on the side of the lens where the image of the stamp is formed, we measure the distance from the lens from this side). Hence, the image is located 15cm from the lens. Since the stamp is located 10 cm above the magnifying glass, the image of the stamp is located 15 + 10 = 25cm above the object or the magnifying glass. Thus, the correct option is c. 30 cm above the magnifying glass.

Learn more about magnification here: https://brainly.com/question/1599771

#SPJ11

The absolute maximum bending stress in the shaft if it is subjected to the pulley loadings is (P1 + P2 + RA + RB) / (π x (2)^2/4).

The maximum bending stress in a steel shaft with a diameter of 2 in, subjected to pulley loadings, can be determined using the following equation:

σ = P/(π x d^2/4)

where P is the load in pounds, and d is the diameter of the shaft in inches.

In this case, P is the sum of the two pulley loads. Since the bearings A and B are only exerting vertical reactions on the shaft, these should be included in the calculation.

Therefore, the maximum bending stress in the steel shaft is σ = (P1 + P2 + RA + RB) / (π x (2)^2/4). This value should be compared to the allowable bending stress for the material to ensure that the shaft is designed to handle the applied loads without exceeding the material's strength properties.

For more such questions on Bending stress.

https://brainly.com/question/13001989#

#SPJ11

A spacecraft is a vehicle that can travel into space. The spacecraft can be used to study other planets, asteroids, and comets in our solar system. Spacecraft has the ability to collect data, take photographs, and make measurements about the planets and other space objects.

With a spacecraft, scientists can learn a lot about planets. Some of the things that can be learned include the following:

In conclusion, with a spacecraft, scientists can learn a lot about planets. Information about a planet can vary depending on the planet.

Learn more about spacecraft: https://brainly.com/question/24571549

#SPJ11

All of the following statements are true about studying spectrum from a star except the statement that "The total amount of light in the spectrum tells us the star's radius."

It is possible to identify chemical elements present in the star by recognizing patterns of spectral lines that correspond to particular chemicals. In other words, we can determine which elements are present in a star by analyzing the spectrum of the light it emits. This is because every chemical element has a unique spectrum of energy that it emits.

The wavelength shifts of spectral lines compared to the wavelengths of those same lines measured in a laboratory on Earth can tell us the star's speed toward or away from us. This is known as the Doppler effect, and it enables astronomers to calculate how fast a star is moving relative to Earth. For example, if the spectral lines are shifted towards the blue end of the spectrum, it means that the star is moving towards us.

On the other hand, if the spectral lines are shifted towards the red end of the spectrum, it means that the star is moving away from us.The peak of the star's thermal emission tells us its temperature: hotter stars peak at shorter (bluer) wavelengths. This is because the hotter an object is, the more energy it radiates, and the shorter the wavelength of that radiation. Therefore, the peak of the thermal emission spectrum provides an indication of the star's temperature.

More on spectrum: https://brainly.com/question/14965583

#SPJ11

The correct option is A, A block of ice of the same mass is set sliding across the floor with the same speed along a parallel line The ice has more kinetic energy.

Kinetic energy is a type of energy that an object possesses by virtue of its motion. It is defined as the energy an object has due to its motion and is proportional to the mass of the object and the square of its velocity. The formula for kinetic energy is KE = 1/2mv², where m is the mass of the object and v is its velocity.

Kinetic energy is a scalar quantity and has units of joules in the International System of Units (SI). It is a fundamental concept in physics and is used to describe many physical phenomena, including the motion of particles, the behavior of gases, and the motion of waves. In many cases, kinetic energy can be transformed into other forms of energy. For example, when a ball is thrown upwards, its kinetic energy is gradually converted into gravitational potential energy as it moves higher and higher.

To learn more about Kinetic energy visit here:

brainly.com/question/26472013

#SPJ4

Complete Question:

Basketball rolls across a floor without slipping, with its center of mass moving at a certain velocity. A block of ice of the same mass is set sliding across the floor with the same speed along a parallel line.(a) How do their energies compare?

A). The ice has more kinetic energy.

B). They have equal kinetic energies.

C). The basketball has more kinetic energy.

The steady-state amplitude Ao = 50.03 degrees and phase, φ = -88.7 degrees by using the impedance method.

The given equation for vs is:

vs = cos(2phi ft) ...[1]

where, f = 1000 Hz,

therefore ω = 2φf

ω= 2000π radians/s

Let's find the impedance of the circuit elements.

The impedance of the resistor is R.

The impedance of the capacitor is:

Zc = 1/(jωC)

The impedance of the inductor is:

ZL = jωL

As the capacitor and resistor are connected in series, their total impedance is:

ZC+R = R + 1/(jωC) ...[2]

Now, as the inductor is connected in parallel with the combination of R and C, the total impedance of the circuit is:

Ztotal = (ZC+R) || ZL...[3]

Ztotal = (R + 1/(jωC)) || jωL

Ztotal = 1/[(1/R) + j(1/ωC - ωL)]...[4]

Comparing the real and imaginary parts of the equation [4],

we get, 1/R = √{(1/ωC - ωL)^2} ...[5]and

1/ωC - ωL = 0

or

ωL = 1/ωC ...[6]

From equation [5],

we get, R = 1/√{(1/ωC - ωL)^2} ...[7]

The magnitude of the input voltage Vs is 1 volt.

The amplitude of the steady-state output voltage, Vc is given by:

Voc = Ao x 1VoltA0

Voc = R/ZtotalA0

Voc = R/1/[(1/R) + j(1/ωC - ωL)]A0

Voc = R(1/R) + jR(1/ωC - ωL)A0

Voc = 1 + jR(1/ωC - ωL) ...[8]

From equation [6],

we get: L = 1/(ωC)

L = 1/(2π x 1000)

L = 1.59 x 10-7 H

Substituting L in equation [6],

we get: ωL = ωC

ωL = 1/2π x 1000 x 1.59 x 10-7

ωL = 0.1Ω

From equation [7], we get: R = 1000 Ω

Substituting the value of R and ωL in equation [8],

we get: A0 = 1 + j1000(1/2π x 1000 x 1.59 x 10-7 - 0.1)

A0 = √{(1^2) + (-50.03)^2}

A0 = 50.03 degrees

Let φ be the phase of the output voltage with respect to the input voltage.

Therefore, we have: tanφ = -50.03φ = -88.7 degrees

Therefore, Ao = 50.03 degrees and φ = -88.7 degrees.

Answer: Ao = 50.03 degrees, φ = -88.7 degrees.

Learn more about impedance: https://brainly.com/question/24225360

#SPJ11

To complete the lab assignment on Electromagnetic Induction, first click the links to open the resources provided.

This will help you complete the task.

After creating the file(s) and once you are ready to submit your assignment,

click the 'Add Files' button and select each file from your desktop or network folder.

Remember to upload each file separately. Once you have uploaded the files, click 'Submit' to submit your work to your teacher.

In this lab, you are expected to understand and apply the concept of Electromagnetic Induction.

Electromagnetic Induction is a process where a varying magnetic field creates an electric field.

The electric field then induces a current in a nearby circuit. This current is caused by Faraday's law of induction.

To know more about Electromagnertic induction; https://brainly.com/question/27613726

#SPJ11

it will take 30.65 minutes for the thermocouple to read 99 percent of the initial temperature difference. (∅/∅i = 0.01).

The temperature of a gas stream is to be measured by a thermocouple whose junction can be approximated as a 1.2-mm-diameter sphere. So, the radius, r = 0.6 mm = 0.0006 m, the volume of the sphere, V = (4/3)πr³, and the area of the sphere, A = 4πr².

The properties of the junction are k = 35 W/m °C, p = 8500 kg/m³, and Cp = 320 J/kg °C, and the heat transfer coefficient between the junction and the gas is h = 65 W/m² °C.

We have, thermal conductivity of the sphere = k = 35 W/m °C, density of the sphere = p = 8500 kg/m³, specific heat of the sphere = Cp = 320 J/kg °C, and heat transfer coefficient between the sphere and the gas, h = 65 W/m² °C.

The initial temperature difference is given by, ΔT₀ = 1°C = 1 K. Let, the time taken for the thermocouple to read 99% of the initial temperature difference, ΔT99 = 0.99 K.

Let, the thermal diffusivity of the sphere be,

α = k / (pCp) = (35 W/m °C) / (8500 kg/m³ x 320 J/kg °C) = 0.000012868 m²/s.

And, the Biot number is given by, Bi = (h x A) / k = [(65 W/m² °C) x 4π(0.0006 m)²] / (35 W/m °C) = 0.0492.

The equation for the unsteady-state temperature profile of a sphere is, θ(r,t) = Σ [(-1)n+1 / n] exp(-n²π²αt / r²) sin (nπr / R), where R is the radius of the sphere. We can estimate the time taken for the thermocouple to read 99% of the initial temperature difference using a semi-log plot of θ/ΔT vs. t/ti.

This plot is linear and of the form, θ/ΔT = 1 - A exp (-Bt/ti), where A = 0.01 and B = (nπ/R)².So, θ/ΔT = 0.99 = 1 - A exp (-Bt/ti), or 0.01 exp (-Bt/ti) = 0.01/0.99, or exp (-Bt/ti) = 1/99, or -Bt/ti = ln (1/99), or t/ti = ln (99).

Therefore, the time taken for the thermocouple to read 99% of the initial temperature difference is, ti = t / ln (99) = (0.000012868 m²/s) (0.6 mm)² / (35 W/m °C) ln (99) = 1838.98 s or 30.65 minutes.

To know more about thermocouple, refer here:

https://brainly.com/question/14555057#

SPJ11#

No, there must always be a force present in order to have an acceleration. This is because, according to Newton's Second Law of Motion, acceleration is exactly proportional to force.

An item will accelerate more quickly the more force is given to it. An object's velocity will remain constant without a force acting on it (whether it is at rest or moving with a constant speed and direction), hence its acceleration will be zero. One of Newton's Three Laws of Motion, this is referred to as the Law of Inertia. No, an acceleration always requires the presence of a force. This is because acceleration is eminently proportional to force, in accordance with Newton's Second Law of Motion.  it NOT possible to have an acceleration without having a force.

learn more about force  here:

https://brainly.com/question/13191643

#SPJ4

The ratio of MbO₂ to Mb at equilibrium with a partial pressure of oxygen pO₂ is 0.00002.

The ratio of MbO₂ to Mb in an aqueous solution at equilibrium with a partial pressure of oxygen pO₂ = 400 Pa can be calculated using the equation ΔG∘=−30.0 kJmol−1 at 298 K and pH = 7.
The equation used is: ΔG∘ = -RT ln (MbO₂/Mb), where R is the ideal gas constant and T is temperature in Kelvin. Rearranging this equation gives MbO₂/Mb = e^(-ΔG∘/RT).
Therefore, the ratio of MbO₂ to Mb at equilibrium with a partial pressure of oxygen pO₂ = 400 Pa is e^(-30.0/8.314*298) = 0.00002.

learn more about oxygen and solution at : https://brainly.com/question/1245440

#SPJ11

Alpha particle emission, beta particle emission, and electron capture are all common types of radioactive decay.The correct answer is D.

They are common types of radioactive decay's because:

Option D includes all of these types of radioactive decay (alpha particle emission, beta particle emission, and electron capture), so it is the correct answer

To learn more about radioactive decay:

https://brainly.com/question/11117468

#SPJ11

Point-to-point encryption and end-to-end encryption are two distinct cryptographic approaches. Both these methods offer data security but in different ways.

The difference between point to point encryption and end-to-end encryption is as follows:

Point-to-point encryption

Point-to-point encryption (P2PE) protects payment card data from the time it is swiped to the point it is encrypted. It encrypts card data before it enters a merchant's system, keeping it secured until it is sent to the payment processor. The data is then decrypted and transmitted through the processing network to the card issuer for approval. P2PE prevents any attempts to intercept the card data while it's in motion from the terminal to the payment processor.

End-to-end encryption

End-to-end encryption (E2EE) involves encrypting data from the point of origin to its final destination. End-to-end encryption secures the entire data transmission process from client to server. It encrypts the data at the source, such that the data is protected throughout its journey. Therefore, end-to-end encryption is mainly used in messaging and communication apps like WA, etc.

For more question on cryptographic click on

https://brainly.com/question/30897608

#SPJ11

The 8.3 on the Richter scale earthquake magnitude can be withstood by the US Bank Tower in Los Angeles.

A frame that is strengthened in two directions is part of the central core structure. Two struts, each one level high, are employed to decrease horizontal stresses brought on by wind or earthquakes beginning at the 53rd floor.

Indeed, it is the answer. Modern structural design techniques can be used to construct skyscrapers that can resist earthquakes. Performance-based structural design (PBSD), a cutting-edge design methodology for creating earthquake-resistant structures, is one of them.

To know more about magnitude visit:-

https://brainly.com/question/30395926

#SPJ1