Answer:
The Windows 10 operating system can benefit from the new technology file system (NTFS) option known as 'auditing'.
What is NTFS?
NTFS is a technology file system that is utilized by the Windows operating system. This system has several advanced features, including file compression and security, that can improve your system's overall performance and functionality.
Explanation:
Auditing is the technique of verifying and checking the security of the computer's operating system. It has been used to track access or attempted access to files on the Windows 10 operating system. It is useful for monitoring and logging access or attempted access to critical system files, directories, and other resources.NTFS file system can benefit from the new technology file system's ability to track access or attempted access to files by using the "Auditing" option. Therefore, this is the NTFS option being used to perform this task.
To learn more about NTFS from here:
https://brainly.com/question/13044551
#SPJ11
the___transmits a memory address when primary storage is the sending or receiving device.
The bus transmits a memory address when primary storage is the sending or receiving device.
Bus in Computer Science- A bus is a collection of wires used to transmit data from one component to another on a motherboard or other electronic circuit board. In modern computer systems, buses have become a significant component.
The primary purpose of a bus is to enable the computer's different components to communicate with one another. Each bus in a computer has a fixed number of wires dedicated to transmitting data to specific parts of the computer. These buses' capacity and design are determined by the type of computer being built and the components being used. A computer may have a number of buses, each performing a specific function.
The transmission of memory addresses when primary storage is the sending or receiving device is made possible by a bus. To put it another way, the bus makes it possible for the computer's central processing unit (CPU) and random access memory (RAM) to communicate efficiently. When the CPU is looking for information, it sends a request to RAM, and the address of the data is transmitted over the bus. Then, once the requested data is found, it is sent back over the bus to the CPU, which can now use it to execute the instructions required for the computer to complete a given task.
To learn more about "primary storage", visit: https://brainly.com/question/31140161
#SPJ11
which of the following is a good practice to prevent your password from being vulnerable to attacks?a. Always use the same passwords across different sites so that you can easily remember them.b. Make sure to follow the links provided in emails to help you reset your passwords.c. Use simple passwords that use basic words and important numbers like your birthday.d. Create your passwords based on some algorithm that helps generate a password that uses a combination of letters, numbers and symbols.
Your passwords should be created using an algorithm that produces ones that combine letters, numbers, and symbols.
What makes a strong password algorithm?Experts advise using salt and a powerful, slow hashing algorithm like Argon2 or Bcrypt to secure passwords (or even better, with salt and pepper). (In essence, for this usage, avoid quicker algorithms.) to validate certificate and file signatures.
What is a strong password established in just 5 simple steps?All passwords should contain a mix of capital and lowercase letters, digits, and special characters . Avoid using names of individuals, pets, or words from the dictionary. It's also recommended to stay away from utilising important dates (birthdays, anniversaries, etc.).
To know more about algorithm visit:-
https://brainly.com/question/24452703
#SPJ1
Question 10 0 / 1 pts What is the correct syntax to define a generic class with multiple bounded parameters? public class MyClass , Type2 extends > {...} public class MyClass {...} public class MyClass extends , Type2 > {...} O public class MyClass extends {...}
The syntax to define a generic class with multiple bounded parameters is `public class MyClass {...}`
Generics were first introduced in the Java SE 5 release as a way to handle type-safe objects. A generic class in Java is a class that can handle a collection of objects of different types. Generics provide a way to define type-specific classes, and Java supports it fully. It is an essential feature of Java programming that allows developers to write robust, reusable, and type-safe code.
To define a generic class with multiple bounded parameters, we can use the syntax shown below:
public class MyClass {...}`
In the above syntax, `Type1` and `Type2` are generic parameters that can take values of any type that extends the specified bound type, `Bound1` and `Bound2`, respectively.
The correct syntax to define a generic class with multiple bounded parameters is given below.
`public class MyClass {...}`
Therefore, option D is the correct answer.
To know more about "syntax", visit: https://brainly.com/question/31143468
#SPJ11
you need to compute the total salary amount for all employees in department 10. which group function will you use?
To compute the total salary amount for all employees in department 10, the group function that will be used is SUM().
SUM() is an SQL aggregate function that allows us to calculate the sum of numeric values. It is frequently used to compute the total sum of values, which is essential in financial applications that need to know the sum of values from tables.
SYNTAX:
SELECT SUM(column_name) FROM table_name WHERE condition;
Example: Suppose you have an employees table with different columns like employee_id, employee_name, salary, department_id, and so on. The following example demonstrates how to use SUM() to calculate the total salary of all employees in department 10: SELECT SUM(salary)FROM employees WHERE department_id = 10;
Output: It will output the sum of all salaries for employees in department 10.
Learn more about SQL visit:
https://brainly.com/question/30456711
#SPJ11
all of the following are reasons we use subprograms except ? group of answer choices to help us organize longer programs to add comments to lines of code for code that will be reused to simplify code
Answer: D, To add comments to lines of code
Explanation:
All of the following are reasons we use subprograms except ?
Group of answer choices
A. For code that will be reused
B. To simplify code
C. To help us organize longer programs
D. To add comments to lines of code
Subprograms do not add comments to the code, this must be done by the programmer.
(Hope this helps)
A construction firm intends to use technology to enhance their architectural designs architecture.Which of the following technologies should they use?
A) MIDI software
B) vector graphics software
C) sampling software
D) CAD software
A construction firm that intends to use technology to enhance their architectural designs should use CAD software.
What is CAD software?Computer-aided design (CAD) software is a software program used by architects, engineers, drafters, artists, and others to create precise drawings or technical illustrations. It enables them to quickly and accurately create and modify digital prototypes of their products, speeding up the design process and reducing errors.
CAD is used by a variety of professionals, including architects, industrial designers, engineers, and others, to create three-dimensional (3D) models of their designs. These digital representations can then be evaluated, modified, and simulated to ensure that the final product is safe, functional, and visually appealing.
In conclusion, a construction firm that wants to use technology to improve its architectural designs should use CAD software.
Learn more about CAD software here: https://brainly.com/question/18995936
#SPJ11
imagine you need to keep a list of donors for a fundraising event, so that you can send thank-you cards. the 'donor' class has name and address. you know that you will have at most 400 donors and you really don't care what order they are stored in. you aren't going to add more donors later, and the only thing you are going to do is eventually iterate the list and print out address labels. what type of list should you use? group of answer choices a. doubly-linked, sorted list b. arraylist c. sorted list d. singly-linked list
The list that you should use to keep a list of donors for a fundraising event, so that you can send thank-you cards is a type of list called an `arraylist`.
-An `arraylist` should be used when you have an idea of the maximum size of a list and the list is not going to change and you aren't going to add more donors later. -An `ArrayList` is similar to an array, but it has the ability to resize automatically, as you add or remove elements from it. Unlike an array, you don't need to give an `ArrayList` a fixed size when you create it, but you can give it an initial size if you have a good idea of how many elements you will need.-When creating an `ArrayList`, you should specify the type of elements it will contain in angle brackets, like this:ArrayList donorList = new ArrayList();-Then you can add elements to the list using the `add()` method:donorList.add("John Doe");donorList.add("Jane Doe");-To print out the address labels, you can simply iterate over the list using a loop and print out the address for each donor.Learn more about arraylist here: https://brainly.com/question/30752727
#SPJ11
which of the following statements is true? a. all of the above. b. an elif statement must always be followed by an else statement. c. an elif statement must always be followed by an if statement d. an elif statement may or may not have an else statement following it.
The following statement is true: d. an elif statement may or may not have an else statement following it.
An elif statement (short for else if) is a statement in Python that is used to test multiple conditions at once. It must be preceded by an if statement, which allows for multiple alternative paths to be taken. An elif statement is not required to be followed by an else statement.
So, the correct option is D.An "if" statement can have one or more "elif" parts, but it must have one "else" part at the end. The elif statement is essentially an "else if" statement that is used to add more conditional statements to the code block. It must be preceded by an if statement, which allows for multiple alternative paths to be taken, and it can be followed by an else statement if desired. However, an elif statement is not required to be followed by an else statement. Therefore, the correct answer is option D: an elif statement may or may not have an else statement following it.
Read more about Python :
https://brainly.com/question/26497128
#SPJ11
Venus can use a server-based monitoring system to help her department be more proactive in responding to events occurring on the network.
What is a notification server?A notification server, often known as a message broker, is a server that mediates message exchanges between two or more applications. Its primary purpose is to receive and process messages, as well as distribute them to the designated recipient or server.
This type of server monitors the network and notifies the IT department when certain conditions are met, such as a suspicious spike in traffic or a sudden change in system parameters. This way, the IT department can quickly respond to any network issues before they become more serious.
In order to meet the objective, Venus can make use of a notification server to help her department be more proactive in terms of being notified, and responding to certain events that occur in the network.
Read more about the server:
https://brainly.com/question/27960093
#SPJ11
Mr. Lowe is a network administrator who plans on purchasing a switch that will be the part of a network for a new fast-growing fast food joint named Momos & More (M&M). The team at M&M has specifically told Mr. Lower that even though the current need of the network is two fiber-optic connections, it is planning on a significant expansion in the coming years. This expansion will include a fiber-topic connectivity to every desktop in the organization. Analyze what Mr. Lowe should do in this situation.a. Order a switch with the current demand numberb. order switches that allow upgradeable interfacesc. order media convertorsd. use APC ferrules
If Mr. Lowe chooses to purchase a switch that only accommodates the organization's current need for two fiber-optic connections, he could have to replace the switch when the network is expanded.
Which network topology type enables you to view the media being utilised and the end devices connected to which intermediary devices?Physical topology: This type of network topology describes how computer wires and other network devices are laid out.
What protocol is in charge of giving hosts on the majority of networks IP addresses that are dynamically assigned from the network?A client/server protocol called Dynamic Host Configuration Protocol (DHCP) automatically assigns an Internet Protocol (IP) host with an IP address and other configuration data like the subnet mask.
To know more about network visit:-
https://brainly.com/question/14276789
#SPJ1
you need to apply security settings to the registry on a windows server. which command should you use? cipher regex regedit certutil
To apply security settings to the registry on a Windows server, the command that you should use is C: "regedit".
"Regedit" is a built-in Windows utility that allows you to view, edit, and modify the registry. The registry is a database that stores important settings and configurations for the Windows operating system and installed applications.
With regedit, you can apply security settings to the registry by modifying the permissions for registry keys and values. By setting permissions, you can control which users and groups can access and modify specific parts of the registry. This helps to protect the registry from unauthorized access or modification, which can cause system instability or security issues.
Thus, option C is the correct answer.
You can learn more about regedit at
https://brainly.com/question/14969685
#SPJ11
. A list can be implemented as an IntList that uses a linked sequence of IntNodes or using an array of type int. Assume that an int takes up 4 bytes in memory, a reference takes up 4 bytes in memory, and an array A is defined to hold up to 200 ints.
(a) If a list has 180 integers in it, which method (array or linked list) is more efficient in terms of memory usage?
(b) If a list has 20 integers in it, which method (array or linked list) is more efficient in terms of memory usage?
(c) The array and linked list implementations require the same amount of memory if the list has how many elements? (Do not include head in this calculation.)
I want answers with explanations
A linked List is more efficient in terms of memory usage if a list has 180 integers. an array is more efficient than a linked list for a list that has 20 integers. An array and a linked list will require the same amount of memory if the list has 1 element.
(a) Linked List is more efficient in terms of memory usage if a list has 180 integers in it since an array of type int is defined to hold up to 200 ints. An array of size 200 x 4 bytes will consume 800 bytes of memory, whether we use all of the memory or not. While the linked list, which can use memory on a per-node basis, will consume just the right amount of memory that is required for the given number of nodes. Therefore, it will be more effective.
(b) In terms of memory use, an array is more efficient than a linked list for a list that has 20 integers. 20 x 4 bytes = 80 bytes are required for storing an array of 20 integers, whereas an array of 20 integers in the linked list will require 20 nodes x 8 bytes per node = 160 bytes, which is double the amount of memory required for an array.
(c) An array and a linked list will require the same amount of memory if the list has 1 element. A linked list with only one node will require 8 bytes of memory (4 bytes for data, 4 bytes for next reference), while an array with 1 integer element will require 4 bytes of memory.
To know more about the linked list: https://brainly.com/question/20058133
#SPJ11
You have backup data that needs to be stored for at least six months. This data is not supposed to be accessed frequently, but needs to be available immediately when needed. You also want to reduce your storage costs.
Which Oracle Cloud Infrastructure (OCI) Object Storage tier can be used to meet these requirements?
a. Auto-Tiering
b. Standard tier
c. Infrequent access tier
d. Archive tier
The Oracle Cloud Infrastructure (OCI), Object Storage tier that can be used to store backup data that should be available immediately when needed but is not supposed to be accessed frequently, while also reducing storage costs is the Infrequent Access Tier. The correct answer d.
Oracle Cloud Infrastructure (OCI) Object Storage is an internet-scale, high-performance storage platform that offers reliable and cost-effective data durability. OCI's object storage provides simple, scalable, and affordable options for storing any type of data in any format. The Standard, Infrequent Access, and Archive storage tiers are the three service tiers available in OCI object storage. The following are the features of each of the service tiers:Standard Tier: It is ideal for general-purpose storage of unstructured data. It is a cost-effective storage tier for applications that require consistent performance for frequently accessed data and access times in milliseconds. This tier is ideal for storing data that requires immediate access and frequently updated data that is frequently accessed.Infrequent Access Tier: It is perfect for long-term data retention, backups, and archives. This tier is ideal for storing infrequently accessed data. Infrequent Access provides similar reliability and durability as the standard tier but at a lower cost. This tier is ideal for storing backups, archives, and other data that is rarely accessed but must be available when needed.Archive Tier: It is ideal for data that must be retained for an extended period. It is a low-cost, scalable storage tier for data that is seldom accessed but needs to be retained for compliance reasons. This tier is ideal for long-term data retention and data that is rarely accessed. It provides similar reliability and durability as the other tiers, but access times are slower than those in the standard and infrequent access tiers. This tier is ideal for storing data that must be kept for long periods but is rarely accessed.Infrequent Access Tier is the OCI Object Storage tier that can be used to store backup data that should be available immediately when needed but is not supposed to be accessed frequently while also reducing storage costs.Therefore, the correct answer d the Archive tier.Learn more about data here: https://brainly.com/question/179886
#SPJ11
Which of the following types of traffic is not exchange by Remote Desktop clients and servers using the Remote Desktop Protocol (RDP)?a. Keystrokesb. Mouse movementsc. Display informationd. Application data
The types of traffic that are not exchange by using Remote Desktop Protocol (RDP) is d. Application data.
Remote Desktop Protocol (RDP) is a proprietary protocol developed by Microsoft to provide a graphical interface for remote access to another computer over a network connection. When a user connects to a remote desktop using RDP, they can interact with the remote computer as if they were physically present at that computer.
RDP exchanges various types of traffic between the client and server, including keystrokes, mouse movements, and display information. Keystrokes and mouse movements allow the user to interact with the remote desktop environment, while display information is used to send visual data from the remote desktop to the client computer.
Learn more about Remote Desktop Protocol here:
brainly.com/question/28903876
#SPJ11
Which of the following is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network?
The option that is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network is e) an application will have drop-down menu choices.
Protocols are the set of rules, procedures, and data formats that two or more entities (devices) use to communicate over a network. The protocol used on a network should match the requirements of the application that is using the network. Identifying protocols that support the hardware and software requirements of the application is a crucial step to ensure network connectivity.
Therefore, among the given options, e) an application will have drop-down menu choices is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network. It is a feature that is used for user interface design.
Learn more about computer networking and network protocols:https://brainly.com/question/14672166
#SPJ11
Your question is incomplete but probably the complete question is :
Which of the following is not an example of identifying protocols that are needed to support hardware and software requirements of applications that will use the network?
a. an application will use HTTP over TCP/IP
b. an application will run on an IBM mainframe and so the network will require SNA traffic
c. an application will need a gateway to translate SNA traffic into TCP/IP protocols
d. an application will use SPX/IPX with a Novell file server
e. an application will have drop down menu choices
A ________ network is one that has at least one computer at its center that provides centralized management, resources, and security. A. homegroup B. peer-to-peer C. workgroup D. client-server
Answer: D. client-server
how to find duplicate values in excel using formula
You can find duplicate values in Excel using the COUNTIF formula. There are different ways to find duplicate values in Excel using a formula. Here are three formulas you can use : =IF(COUNTIF($A$1:$A$10, A1)>1,"Duplicate","Unique")
This formula checks whether a cell in the range A1:A10 has a duplicate by counting the number of times that cell occurs in the range. If the count is greater than 1, then it returns "Duplicate," otherwise it returns "Unique."Formula 2: =IF(SUMPRODUCT(($A$1:$A$10=A1)*1)>1,"Duplicate","Unique")
This formula works in a similar way to formula 1, but instead of using COUNTIF, it uses SUMPRODUCT to multiply each occurrence of a cell in the range A1:A10 by 1. If the sum is greater than 1, then it returns "Duplicate," otherwise it returns "Unique." Formula 3: =IF(COUNTIF($A$1:$A$10, A1)=1,"Unique","Duplicate")
This formula checks whether a cell in the range A1:A10 has a duplicate by counting the number of times that cell occurs in the range. If the count is equal to 1, then it returns "Unique," otherwise it returns "Duplicate."
To use these formulas, you need to enter them into a cell in your worksheet and then drag the formula down to the rest of the cells in the range. The formula will automatically update for each cell in the range.
For such more question on COUNTIF:
https://brainly.com/question/30730592
#SPJ11
Select all of the registers listed below that are changed during EVALUATE ADDRESS step of an LC-3 LDR instruction. Select NONE if none of the listed registered are changed.
a. PC
b. NONE
c. MDR
d. DST register
e. MAR
f. IR
During the EVALUATE ADDRESS step of an LC-3 LDR instruction, the MAR register is changed. Therefore, the correct option is E. MAR.
The rest of the options are discussed below:
a. PC: The Program Counter (PC) register, which keeps track of the address of the current instruction, is not changed in the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.
b. NONE: Since MAR is changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction, this answer is incorrect.
c. MDR: Memory Data Register (MDR) is not modified during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.
d. DST register: The DST register is not modified during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.
e. MAR: The Memory Address Register (MAR) is changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is correct.
f. IR: Instruction Register (IR) is not changed during the EVALUATE ADDRESS step of an LC-3 LDR instruction. Therefore, the answer is incorrect.
You can learn more about MAR register at: brainly.com/question/15892454
#SPJ11
you want to prevent users in your domain from running a common game on their machines. This application does not have a digital signature. You want to prevent the game from running even if the executable file is moved or renamed. You decide to create an Applocker rule to protect your computer. Which type of condition should you use in creating this rule?
To prevent users in your domain from running a common game on their machines, you can use AppLocker to create a rule that blocks the game's executable file from running.
Since the application does not have a digital signature, you can create a path rule that specifies the location of the executable file. To ensure that the rule applies even if the file is moved or renamed, you should use a publisher condition with a hash rule.
A publisher condition with a hash rule checks the digital signature of an executable file to ensure that it has not been tampered with or modified. Since the game does not have a digital signature, the hash rule will generate a unique identifier based on the file's content, and this identifier will be used to enforce the rule. By combining the publisher condition with the hash rule, you can prevent the game from running even if the file is moved or renamed to a different location.
You can learn more about executable file at
https://brainly.com/question/13166283
#SPJ11
nikita attempts to install a hypervisor on her laptop. when she tries to create a virtual machine an error message suggests that virtualization is not supported. where can she check to see if virtualization is enabled?
To check if virtualization is enabled on your laptop, you can check in the BIOS settings. Typically, this setting is located under the Advanced tab. However, it can differ depending on the make and model of your laptop.
Virtualization is the technology that allows multiple operating systems to run on the same physical computer simultaneously. The hypervisor is the software that makes virtualization possible by sitting between the computer hardware and the operating system .However, before installing a hypervisor and running a virtual machine, one must check whether their laptop supports virtualization. It can be checked in the BIOS settings. To enter the BIOS settings, restart the computer and press the appropriate key to enter the BIOS setup utility during the startup process. The key to press may vary depending on the manufacturer and model of the laptop
.Inside the BIOS, navigate through the options and look for a setting that refers to virtualization. The name may vary depending on the laptop model, and the option may be under advanced or security settings. If the virtualization option is not present in the BIOS, the laptop may not support it, and therefore, it cannot run a hypervisor or virtual machines.
Read more about the virtualization :
https://brainly.com/question/27939176
#SPJ11
__________ combined with search schemes make it more efficient for the computer to retrieve records, especially in databases with millions of records.
The use of indexing in databases combined with search schemes makes it more efficient for computers to retrieve records, particularly in databases with millions of records.
Indexing is the method of organizing data in a database into smaller, manageable units that may be quickly retrieved by computers. It is like the index of a book, which aids in quickly finding particular information within the book. It helps to speed up the search process since it decreases the amount of data that needs to be searched.
Indexes are utilized in various types of databases, including hierarchical databases, network databases, relational databases, and object-oriented databases. A search scheme is a method for finding data in a database. It specifies the rules and protocols for conducting a search, and it is a critical component of database management. A search scheme is often customized to the specific requirements of a particular database.
It aids in streamlining the search process by reducing the number of results and making it easier to locate the required data. In addition, search schemes aid in the reduction of redundancy in the database. Since all records contain distinct values, the search scheme ensures that there are no duplicate records in the database.
To learn more about Databases :
https://brainly.com/question/29833181
#SPJ11
A network administrator is looking at the security of their Domain Name System servers and is researching common attacks against DNS. Which of the following is NOT as common of an attack geared towards DNS services?
Question options:
a. Flood attacks
b. Rogue server
c. Zone transfer
d. Cache Poisoning
e. SMB attacks
A network administrator is looking at the security of their Domain Name System servers and is researching common attacks against DNS then, a non-common attack would be SMB attacks. The correct option is e.
Domain Name System (DNS) is a protocol that converts human-readable domain names into IP addresses that machines can recognize. DNS, a network service, is responsible for converting domain names into IP addresses and vice versa. DNS, which is a database of domain names and IP addresses, is often described as a telephone book of the internet.DNS plays a critical role in the functioning of the internet. It makes it simple to access websites and other internet resources. DNS enables the internet to exist in the form that it is today by ensuring that data packets are routed to their intended location.The following are the common attacks geared towards DNS services:-Flood attacks-Rogue server-Zone transfer-Cache Poisoning-SMB attacks-SMB attacks is not a common attack geared towards DNS services. SMB (Server Message Block) is a protocol used to exchange files, printers, and other resources between computers. It is not a DNS-specific protocol or attack method. Therefore, the correct option is e. SMB attacks.Learn more about network here: https://brainly.com/question/2780939
#SPJ11
buying a ticket for a college football game where there are multiple windows to buy the ticket at features which type of queuing system line structure?
Buying a ticket for a college football game where there are multiple windows to buy the ticket at features a multiple queue or multi-line queuing system.
In a multiple queue system, there are multiple waiting lines, and each line is assigned to a specific service station or window. Customers choose the line they want to join based on their preferences, such as the length of the queue or the location of the service station.
In the case of buying a ticket for a college football game, each window represents a service station, and customers can choose to join the line for the window that they prefer or that has the shortest waiting time.
This type of queuing system is often used in settings where there are multiple service stations, such as in retail stores, banks, or amusement parks, to reduce waiting times and improve customer satisfaction.
You can learn more about queuing system at
https://brainly.com/question/17137414
#SPJ11
the transport layer uses port numbers to identify the source and destination application-layer protocol of the data that it contains.True or false
The given statement "the transport layer uses port numbers to identify the source and destination application-layer protocol of the data that it contains" is true. It is becasue the transport layer in the TCP/IP protocol suite uses port numbers to identify the source and destination application-layer protocol of the data that it contains.
Port numbers are 16-bit unsigned integers that range from 0 to 65535. The first 1024 port numbers are reserved for well-known services such as HTTP, FTP, and SMTP, while the remaining port numbers can be used by applications or services as needed. When data is sent from an application, the transport layer in the operating system adds a source port number to identify the application that is sending the data, and a destination port number to identify the application that is intended to receive the data.
When the data arrives at the destination, the transport layer uses the destination port number to deliver the data to the correct application.
You can learn more about transport layer at
https://brainly.com/question/30426969
#SPJ11
You are a computer support technician contracted to help determine the best IEEE 802.11 WLAN solution for a small office installation. The office is located in a multitenant building on the fifth floor of an eight-story building. Another business in an adjoining office is using an IEEE 802.11b WLAN operating on channels 1 and 6. The customer wants maximum throughput and does not need backward compatibility to IEEE 802.11b. Of the following, which is the best solution for this installation? A. Install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11. B. Install an IEEE 802.11b DSSS WLAN and set the access point to automatic channel select. C. Install an IEEE 802.11b/g HR/DSSS, ERP-OFDM WLAN with protection enabled to eliminate RF interference. D. Install an IEEE 802.11n/ac WLAN, enable HR/DSSS only, and set the output power to maximum.
The best solution for a computer support technician who is assigned to decide the best IEEE 802.11 WLAN solution for a small office installation is-
A. install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11.
IEEE- IEEE refers to the Institute of Electrical and Electronics Engineers, which is an organization that promotes technological innovations and excellence throughout the world. IEEE has set up numerous technological standards to enhance device performance and compatibility. IEEE 802.11 refers to a wireless networking standard, commonly known as Wi-Fi. WLAN stands for Wireless Local Area Network.
Problem in this case- Another business is utilizing an IEEE 802.11b WLAN operating on channels 1 and 6. The customer wants maximum throughput and does not need backward compatibility to IEEE 802.11b. Therefore, the channel numbers 1 and 6 are already occupied. This implies that channel 11 should be used instead.
ERP protection should be disabled to enhance the data transfer rate. The ERP protection may impact the transmission rates of an IEEE 802.11n WLAN, and the customer wants to achieve the maximum throughput. As a result, this option is selected. Hence, it can be concluded that the best solution for this installation is to install an IEEE 802.11n/ac MIMO WLAN, disable ERP protection, and set the access point to channel 11.
Therefore option A is the correct answer.
"IEEE", https://brainly.com/question/31143015
#SPJ11
T/F for two series of 20 trials, average reaction times will be faster for the series when the foreperiods are a constant length of time compared to when the foreperiods are varied lengths of time.
The given statement is true because for two series of 20 trials, average reaction times will be faster for the series when the foreperiods are a constant length of time compared to when the foreperiods are varied lengths of time.
The given statement is true because the foreperiod, which is the time interval between a warning signal and a target stimulus, has been shown to have a significant effect on reaction time. When the foreperiods are a constant length of time, individuals can prepare and anticipate the target stimulus, leading to faster reaction times.
In contrast, when the foreperiods are varied lengths of time, individuals may have difficulty predicting the target stimulus, leading to slower reaction times. Therefore, on average, reaction times will be faster for the series with constant foreperiods compared to the series with varied foreperiods.
You can learn more about warning signal at
https://brainly.com/question/30792775
#SPJ11
Which of the following sequence is used by the attacker, in the Directory Traversal Attacks to access restricted directories outside of the web server root directory. Select one
/...
//...
..//
../
The sequence used by the attacker, in the Directory Traversal Attacks to access restricted directories outside of the web server root directory is ../.
Directory Traversal Attack is a vulnerability that happens when an attacker can break out of a web application's root directory and access sensitive files on a web server. A hacker can use directory traversal to view files, execute code, and access sensitive data. Directory traversal attacks can be launched using various methods, including web servers, FTP clients, and even SSH terminals.
Directory traversal is a type of web exploit that can be used to read sensitive data, execute code, or even gain administrative access to a web server. It's a method of exploiting web servers that occurs when an attacker sends unexpected input to the server, causing it to display the contents of a directory that isn't meant to be visible.
Learn more about Directory Traversal Attack:https://brainly.com/question/28207101
#SPJ11
as discussed in class create database is similar to group of answer choices designing a closet organizer designing a car writing a story developing an app
The answer is designing a closet organizer, designing a car, writing a story, or developing an app. So, all the given options are correct,
A database is a collection of data stored on a computer that is structured in such a way that it can be easily accessed, managed, and updated by authorized personnel. A database management system (DBMS) is used to create and maintain databases, allowing users to query and manipulate the data stored within them.
The development of an app, on the other hand, is a process that involves the creation of software applications for use on mobile devices, computers, or other platforms. This involves designing, coding, testing, and deploying the app, as well as providing ongoing support and maintenance.
Both of these processes require careful planning, attention to detail, and a clear understanding of the needs of the users. In both cases, it is important to design the system in a way that is flexible, scalable, and easy to use, and to ensure that it is secure, reliable, and well-documented.
You can learn more about databases at: brainly.com/question/30634903
#SPJ11
Loops are very useful for doing the same calculation over and over, very quickly.
In this problem, we will use a loop to call a function with different inputs, and store the result in an array.
You are doing an experiment where you are trying to experimentally calculate the air resistance on falling objects. To calculate this resistance, you build an apparatus that will release objects with different initial velocities at different distances. You also set up a system for measuring the exact time it takes each object to fall.
To do your air resistance calculation, you need a theoretical comparison for the amount of time it takes an object to fall in a vacuum. Thankfully you already have that function (please download fallTime.m from Canvas)! What you do not have yet is a way to call that function repeatedly for all of the distance and velocity data you have!
Write a function called timeLoop. It should take two inputs, arrays for initial velocity and distance. These two input arrays will always have equivalent lengths, as the indices of these arrays correspond to the same data point from your experiment. It should return one output, an array for the theoretical amount of time it would take for the object moving at that initial velocity to fall that distance. To accomplish this task, you should call fallTime.m inside of a loop.
For example, if you called timeLoop with the input array [2 -3 5] for initial velocities (negative numbers mean the object was moving upwards initially) and [100 150 300] for distances, your function call and resulting output would look like this:
IN Matlab
%This function calculates how long it takes an object to fall a certain
%distance given a certain initial velocity and a distance
function time = fallTime(startVelocity,distance)
g = 9.81; %m/s^2
finalVelocity = sqrt(startVelocity^2 + 2*g*distance); %m/s
time = (finalVelocity - startVelocity)/g; %s
we can use a loop to call the function 'fallTime.m' with the different inputs and store the result in an array.
The code for the 'timeLoop' function would look like this:
function time = timeLoop(velocity,distance)
% This function takes two input arrays for initial velocity and distance and
% returns an array of the theoretical amount of time it would take for the
% object moving at that initial velocity to fall that distance
% Initialize time array
time = [];
% Loop through the velocity and distance arrays
for i = 1:length(velocity)
% Calculate the theoretical time using the fallTime.m function
t = fallTime(velocity(i),distance(i));
% Store the theoretical time in the time array
time = [time t];
end
In this code, the 'timeLoop' function takes two input arrays (for initial velocity and distance) and returns an output array for the theoretical amount of time it would take for the object moving at that initial velocity to fall that distance.
It does this by looping through the velocity and distance arrays and calling the 'fallTime.m' function to calculate the theoretical time for each combination. The result is then stored in the 'time' array.
To know more about time loop function: https://brainly.com/question/24213966
#SPJ11
List all the disadvantages of fort watchtower
A fort's drawbacks include limiting your range of motion and making it difficult to organize a sizable force inside the fort prior to a combat. Forts are useful stopovers for lodging troops traveling a long distance outside of conflict.
A fort is a fortified military structure designed to protect a specific location or area from external threats. Forts can vary in size and shape, and can be constructed using a variety of materials and techniques. Some forts are built to withstand attacks from land or sea, while others are designed to protect natural resources such as water sources or transportation routes. Historically, forts have been used by armies and other military forces as defensive positions during battles and wars. Today, many forts have been repurposed as historical landmarks, museums, or tourist attractions.
Learn more about routes here brainly.com/question/18850324
#SPJ4
Which of the following enables people all over the world to share the same information, news, and entertainment?
- lasers
- satellite technology
- scanning technologies
- athe Green Revolution
Satellite technology enables people all over the world to share the same information, news, and entertainment.
What is satellite technology?
A satellite is a tool that orbits the Earth and provides communication, navigation, and observation services. Communication satellites provide services such as television and telephone networks, as well as satellite internet. Navigation satellites provide location data and other positional data that are used in navigation applications. Observation satellites collect data about the Earth and the environment. These data are used for a variety of applications, including weather forecasting, climate research, and natural resource management.
Therefore, the correct option is B. Satellite technology enables people all over the world to share the same information, news, and entertainment.
Learn more about Satellite technology:https://brainly.com/question/8376398
#SPJ11
