Thirty-six percent of adult Internet users have purchased products or services online. For a random sample of 200 adult Internet users, find the mean, variance, and standard deviation for the number who have purchased goods or services online. Round your answer to one decimal place.

The surface area of the rectangular prism is 170 square yards.

Surface area is the total area of a three-dimensional shape's surface. Add the areas of all six faces to find the surface area of a cuboid with six rectangular faces. Alternatively, label the cuboid's length (l), width (w), and height (h) and use the formula: surface area (SA)=2lw+2lh+2hw.

To calculate the surface area of the rectangular prism, add the areas of each of its faces.

The front and back faces are 5 yards by 6 yards in size, so each has an area of:

5 yards x 6 yards equals 30 square yards

The top and bottom faces are 5 yards by 5 yards, so each has an area of:

5 yards x 5 yards equals 25 square yards

The two side faces have dimensions of 6 yards by 5 yards, for a total area of:

30 square yards = 6 yards x 5 yards

As a result, the surface area of the rectangular prism is as follows:

Front face area plus back face area plus top face area plus bottom face area plus left side face area plus right side face area

= 30+30+25+25+30+30

= 170 square yards

As a result, the rectangular prism has a surface area of 170 square yards.

To know more about surface area visit:

hhttps://brainly.com/question/29298005

#SPJ1

a. Two levels of factor B were used in the experiment.

b. The degrees of freedom associated with interaction are 50.

c. The error mean square is 6.00. d. The mean square for factor A is 175.00.e. The experiment was conducted with three replicates.f. The interaction is significant. Factor A is significant. Factor B is not significant.g. An estimate of the standard deviation of the response variable is 2.449. h. If the experiment had been run in blocks (CRBD) there would have been 12 degrees of freedom for blocks.Solution:Factorial design: A factorial design is an experimental design that consists of two or more factors, each with two or more levels, and each subject is assigned to one and only one level of each factor. The objective of a factorial experiment is to analyze the effect of each factor on the response variable and to examine if there is any interaction between factors.a. Two levels of factor B were used in the experiment.b. Interaction degrees of freedom = AB = 50.c.

Mean square for error: MSE = 150/10 = 15.d. Mean square for factor A: MS(A) =[tex]SSA/dfA = 350/2 = 175.e.\\[/tex] Three replicates were conducted (from the error df = 10).f. Interaction is significant. Factor A is significant. Factor B is not significant.g. Estimate of the standard deviation of the response variable: sqrt(15/2) = 2.449.h. If the experiment had been conducted in a CRBD, there would have been 12 degrees of freedom for the block.

for such more questions on standard deviation

https://brainly.com/question/475676

#SPJ11

2/7 + 1/4 = 15/28 ≅ 0.5357143

Add: 2/7 + 1/4 = 2 · 4/7 · 4 + 1 · 7/4 · 7 = 8/28 + 7/28 = 8 + 7/28 = 15/28 

It is suitable to adjust both fractions to a common (equal, identical) denominator for adding, subtracting, and comparing fractions. The common denominator you can calculate as the least common multiple of both denominators - LCM(7, 4) = 28. It is enough to find the common denominator (not necessarily the lowest) by multiplying the denominators: 7 × 4 = 28. In the following intermediate step, it cannot further simplify the fraction result by canceling.In other words - two sevenths plus one quarter is fifteen twenty-eighths.

The probability that at most of the parts are defective is 0.96.

A machine that manufactures automobile parts produces defective parts of the time. If parts produced by this machine are randomly selected, what is the probability that at most of the parts are defective?

The given probability of producing defective parts is P(defective) = 0.15. Now, we need to find the probability that at most of the parts are defective. This can be done by finding the probability of producing 0, 1, or 2 defective parts.

Let X denotes the number of defective parts. So, we have to calculate the probabilities for P(X = 0), P(X = 1), and P(X = 2). To calculate these probabilities, we will use the binomial probability formula:

P(X = x) ={n}C{x} p^x (1 - p)^{n - x}, Here, n = number of parts produced, p = probability of producing defective parts

x = number of defective parts

First, we need to find P(X = 0),

P(X = 0) = (0.85)^5 = 0.4437

P(X = 1) = {5}C{1} (0.15)^1 (0.85)^4 = 0.3672

P(X = 2) = {5}C{2} (0.15)^2 (0.85)^3 = 0.1459

Now, we can find the probability that at most of the parts are defective as follows:

P{at most 2 defective parts}) = P(X = 0) + P(X = 1) + P(X = 2) = 0.957

Therefore, the probability that at most of the parts are defective is 0.96.

To learn more about probability refer :

https://brainly.com/question/12905909

#SPJ11

Answer: 0.4

Step-by-step explanation:

I genuinly cant be asked to explain.

Answer:

k

Step-by-step explanation:

2x+13<5x−20

Subtract 5x from both sides.

Combine 2x and −5x to get −3x.

Subtract 13 from both sides.

Subtract 13 from −20 to get −33.

Divide both sides by −3. Since −3 is negative, the inequality direction is changed.

​

x>11

Answer: $3.64

Step-by-step explanation:

At the store, you buy four toys for $1.5, which means you pay $1.5 * 4, or $6.

Then, you calculate the sales tax, which is 6%, which means you multiply $6 by (100% + 6%), or $6*(1.06) which is $6.36.

Finally, if you hand the cashier $10, and you spent $6.36, your change is $10 - $6.36, which is $3.64.

After solving the given equations we know that the value of x and y are -4 and -7 respectively.

A mathematical equation is a formula that uses the equals sign to represent the equality of two expressions.

Ax+By=C is the usual form for two-variable linear equations.

A standard form linear equation is, for instance, 2x+3y=5. When an equation is given in this format, finding both intercepts is rather simple (x and y).

This form is also highly useful when solving systems involving two linear equations.

So, we have the equations:

y=2x+1 ...(1)

-4x+y=9 ...(2)

Now, substitute y=2x+1 in equation (2):

-4x+y=9

-4x+2x+1=9

-2x=8

x=-4

Now, insert x=-4 in equation (1):

y=2x+1

y=2(-4)+1

y=-8+1

y=-7

Therefore, after solving the given equations we know that the value of x and y are -4 and -7 respectively.

Know more about equations here:

https://brainly.com/question/2972832

#SPJ1

Answer:

The equation of a line perpendicular to y=3 that goes through the point (-5, 3) is: x = -5.

Step-by-step explanation:

To find the equation of a line perpendicular to y=3 that goes through the point (-5, 3), we need to remember that the slope of a line perpendicular to another line is the negative reciprocal of the slope of the original line.

The equation y=3 is a horizontal line that goes through the point (0,3), and its slope is zero. The negative reciprocal of zero is undefined, which means that the line perpendicular to y=3 is a vertical line.

To find the equation of this vertical line that goes through the point (-5, 3), we can start with the point-slope form of a linear equation:

y - y1 = m(x - x1)

where m is the slope of the line and (x1, y1) is a point on the line. Since the line we want is vertical, its slope is undefined, so we can't use the point-slope form directly. However, we can still write the equation of the line using the point (x1, y1) that it passes through. In this case, (x1, y1) = (-5, 3).

The equation of the vertical line passing through the point (-5, 3) is:

x = -5

This equation tells us that the line is vertical (since it doesn't have any y term) and that it goes through the point (-5, 3) (since it has x=-5).

So, the equation of a line perpendicular to y=3 that goes through the point (-5, 3) is x = -5.

Answer:

x= -5

Step-by-step explanation:

The perpendicular line is anything with x= __.

x= -5 however, will go through the point (-5, 3) and that is our answer.

Answer:

Step-by-step explanation:

44

Answer:

a. Jason's equation in y = mx + b form is y = 15x + 1.

b. Scott's equation in y = mx + b form is y = 15x.

Since both are moving at the same speed, they will meet at the point where their distances from the starting point are the same. Let d be the distance from Scott's starting point to the store. Then, the distance from Jason's starting point to the store is d + 1. Using the formula distance = rate × time, we can set up an equation:

15t = d

15t - 1 = d + 1

Solving for t in both equations, we get t = d/15 and t = (d+2)/15, respectively. Equating these expressions for t, we get d/15 = (d+2)/15, which simplifies to d = -2. This means that they will not meet before reaching the store, as Jason is already 1 mile ahead of Scott and will stay ahead throughout the trip.

If we were to graph both lines on the same coordinate plane, we would have two parallel lines with a slope of 15, where Jason's line would intersect the y-axis at 1.

The length of the side on the prism is 5cm. The area of the shaded region is 72 cm².

Area is the total amount of area occupied by a flat (2-D) surface or an object's shape. The area of a plane figure is the region that its boundary encloses. The quantity of unit squares that span a closed figure's surface is its area. Square units like cm² and m² are used to quantify area. A shape's area is a two-dimensional measurement.

The region inside the perimeter or boundary of a closed shape is referred to as the "area". Such a shape has at least three sides that can be joined together to create a boundary. The "area" formula is used in mathematics to describe this type of space symbolically.

In this figure,

The 5cm flap will be adjacent to the side x. Therefore,

Length of the side x= 5cm

Area of the shaded region= l×b

because the shaded region is a rectangle.

area= 9*x

       =9*5= 45 cm²

To know more about area, visit

https://brainly.com/question/27683633

#SPJ1

Answer:

[tex]{ \sf{ = 41 \times 100 + 41 \times { \boxed{2}}}} \\ \\ = { \sf{ \boxed{4100} + { \boxed{82}}}} \\ \\ = { \sf{ \boxed{4182}}}[/tex]

Answer:

A- 2

B- 4,100

C- 82

D- 4,182

Answer:

The perimeter of a rectangle is given by:

P = 2(L + W)

where P is the perimeter, L is the length, and W is the width.

In this case, we know that P = 270 cm and L = 90 cm, so we can solve for W as follows:

270 = 2(90 + w)

Divide both sides by 2:

135 = 90 + w

Subtract 90 from both sides:

w = 45

Therefore, the width of the map is 45 cm.

Step-by-step explanation:

According to the circle theorem, we can find the length of the cord, x = 4 units.

Geometrical assertions known as "circle theorems" set forward significant conclusions pertaining to circles. These theorems provide significant information regarding several aspects of a circle.

A circle's chord is a line segment that hits the circle twice on its edge, separating it into two equal pieces. The circle is divided into two equal pieces by the longest chord of the circle, which runs through its centre.

Here in the given circle,

As per the intersecting chords theorem,

AB × CB= BE × BD

⇒ 6 × 6 = 9× x

⇒ x = 36/9=4

Therefore, the length of the chord, x = 4 units.

To know more about circle theorem, visit:

https://brainly.com/question/19906313

#SPJ1

The required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Chebyshev’s Theorem:Chebyshev's Theorem states that, for any given data set, the proportion (or percentage) of data points that lie within k standard deviations of the mean must be at least (1 - 1/k2), where k is a positive constant greater than 1.Calculation:Given,Mean (μ) = 72N (Total number of values) = 387Interval (x) = 64-80 and 56-88Minimum values (n) = 344Minimum percentage (p) = (344 / 387) x 100 = 88.85%From the given data we have,1. Calculate the variance of the distribution,Variance = σ2 = [(n × s2 ) / (n-1)]σ2 = [(344 × 42) / 386]σ2 = 18.732. Calculate the standard deviation of the distribution,σ = √(18.73)σ = 4.33. Calculate k = (|x - μ|) / σ for the given interval 56-88,Here, x1 = 56, x2 = 88, k1 = |56-72| / 4.33 = 3.7, k2 = |88-72| / 4.33 = 3.7Thus, k = 3.74. Calculate the minimum percentage of values within the interval 56-88 using Chebyshev's Theorem,p = [1 - (1/k2)] x 100p = [1 - (1/3.7)2] x 100p = 74.37% (approximately)Therefore, the required percentage of values that should fall in the interval 56-88 is approximately 74.37%.

Learn more about Percentage

brainly.com/question/2155156

#SPJ11

The value of' b' is 27 when' a' is three.

The presented equation is a x 9 = b, wherein' a' is a variable and' b' is the product of' a' and nine. we are asked to find the value of' b' when' a' is 3.

Substituting the value of' a' into the equation, we get

3 x 9 = b

27 = b

Thus, the value of' b' is 27 when' a' is three.

On this equation,' a' is a variable, this means that that its cost can trade. still, the value of' b' is dependent on the price of' a'. whilst' a' is 3, the price of' b' is 27. this is an illustration of a easy linear equation, in which the value of one variable is dependent on the figure of any other variable, and can be used to model real-global situations.

Learn more about linear equation:-

https://brainly.com/question/28732353

#SPJ4

Answer:

h = 15 cm

Step-by-step explanation:

Area of triangle equals the area of rectangle. As the dimensions of the rectangle is given, we can first find the area of the rectangle.

      [tex]\boxed{\bf Area \ of \ the \ rectangle = length * width}[/tex]

                                               = 10 * 9

                                               = 90 cm²

Area of triangle = area of rectangle

                          = 90 cm²

base of the triangle = b = 12 cm

 [tex]\boxed{\bf Area \ of \ triangle = \dfrac{1}{2}bh}[/tex]  where h is the altitude and b is the base.

         [tex]\bf \dfrac{1}{2} b* h = 90 \\\\\dfrac{1}{2}*12* h = 90[/tex]

                      [tex]\bf h = \dfrac{90*2}{12}\\\\\boxed{\bf h = 15 \ cm}[/tex]

The shape that results from connecting the points (-4, 1), (-4, -4), (0, 3), and (0, 6) is a trapezoid.

A trapezoid is a geometric form that has four sides, two of which are parallel and two of which are nonparallel (or skew lines). A trapezoid is also known as a trapezium (UK) or a trapeze (US).

The trapezoid's parallel sides are known as the bases, and the two nonparallel sides are known as the legs or lateral sides. The trapezoid is also sometimes referred to as the irregular quadrilateral.

A quadrilateral is a shape that has four sides, four vertices, and four angles. The following are the characteristics of a trapezoid:

The formula for the area of a trapezoid is as follows:

Area of a trapezoid = [ (base 1 + base 2) / 2 ] x height

To know more about the "trapezoid": https://brainly.com/question/1463152

#SPJ11

Answer:

C. 15m^3-6m=3m(5m^2 -6m) is true.

D. 6m^2+18m=6m^2(1+3m) is true.

A. 40m^6 -4=4(10m^6-1) is not true.

B. 32m^4 +12m^3 =4m^3(8m +3) is not true.

Answer:

C. 15m^3-6m=3m(5m^2 -6m) is true.

D. 6m^2+18m=6m^2(1+3m) is true.

Step-by-step explanation:

As per the given distance, the bus and the motorcycle will pass each other at 4:50 pm.

Now, let's find the distance the bus travels during that time. We know the speed of the bus is 60 mph, so we can use the formula distance = speed x time. Thus, the distance the bus travels is:

distance = speed x time

distance = 60 x t

Next, let's find the distance the motorcycle travels during the same time. The speed of the motorcycle is 72 mph, so we can use the same formula to find the distance the motorcycle travels:

distance = speed x time

distance = 72 x (t - 3/4)

Here, we subtract 3/4 from the time because the motorcycle leaves 45 minutes later than the bus. Remember, we need to convert 45 minutes to hours by dividing it by 60. Therefore, 45 minutes is equal to 3/4 of an hour.

Now that we have both distances, we can set them equal to each other since the bus and the motorcycle will meet at the same point in time:

60t = 72(t - 3/4)

Let's simplify and solve for "t":

60t = 72t - 54

12t = 54

t = 4.5

Therefore, it will take 4.5 hours for the bus and the motorcycle to meet each other. But, we need to find out what time that will be. We know the bus left at 12:20 pm, so we add 4.5 hours to that time:

12:20 pm + 4.5 hours = 4:50 pm

To know more about distance here

https://brainly.com/question/4199102

#SPJ4

The rounding of the number to 1 significant figure is-

216 × 876 = 180000

216 × 876

This number can be written in form of rounding to 1 significant figure as;

200 × 900 = 180000

To know more about the significant figure, here

https://brainly.com/question/293578

The statement that is correct is (D) We can use the binomial distribution with n = 100, k = 10, and p = 0.24 to calculate this probability.

The binomial distribution can be used to calculate the probability of a certain number of successes in a given number of trials, where each trial has a fixed probability of success.

The probability of a flight being delayed is 0.24, and the probability of a flight not being delayed is 0.76. Therefore, the probability of exactly 10 flights out of 100 being delayed can be calculated using the binomial distribution with n = 100, k = 10, and p = 0.24.

Learn more about binomial distribution here: https://brainly.com/question/30049535

#SPJ11

This principle is validated by the data shown in the table.

Tests and measurements is an essential aspect of the education process as it enables educators to gauge the level of knowledge and skills their students have acquired. The principle that longer tests tend to be more reliable than shorter ones has some merit because it allows educators to assess a broader range of skills and knowledge, which increases the validity of their assessments.In my opinion, the principle that longer tests tend to be more reliable than shorter ones is illustrated in the reliability coefficients shown in the table. This is because the data shows that the reliability coefficients for longer tests are consistently higher than those for shorter tests. Additionally, the results for the 10-item test indicate a higher reliability coefficient compared to the 5-item test, which supports the notion that longer tests are more reliable than shorter ones.The table displays that the longer tests have higher reliability coefficients compared to the shorter tests. For example, in the 5-item test, the reliability coefficient is .45, while the 10-item test's reliability coefficient is .73. This shows that the 10-item test is more reliable than the 5-item test, as the higher reliability coefficient indicates that the assessment is consistent in measuring the skill or knowledge it is intended to measure. As a result, this principle is validated by the data shown in the table.

Learn more about principle

brainly.com/question/30388578

#SPJ11

Answer: Associative property

Step-by-step explanation:

The definition of the associative property is the answer is the same no matter how the terms are grouped. Hope this helped!

To determine the probability of a continuous distribution we use the integral to determine it and for the normal distribution the integral is not so simple, for that reason it is simpler to use range values from tables.

Probability can be determined from a continuous distribution in the following way:To compute the probability of a given interval for a continuous random variable, the area under the curve over the interval is determined. Integrals are used to calculate this area under the curve, which can be done either numerically or analytically using probability density functions.

For some distributions, such as the uniform distribution, calculating the area under the curve is straightforward. However, for other distributions, such as the normal distribution, it can be more difficult to calculate the integral analytically.

The normal distribution is a continuous probability distribution that is frequently used in statistics. It is defined by its probability density function, which is a bell-shaped curve with a mean and a standard deviation.

Calculating the area under the curve for the normal distribution requires the use of integrals. Integrals are difficult to solve analytically for the normal distribution because the probability density function is not simple. However, it is relatively simple to calculate the probability for a given range of values using standard statistical tables or computer software.

See more about probability distribution at: https://brainly.com/question/23286309

#SPJ11

The probability that it the marble taken out of the box is not blue is [tex]\frac{112}{131}[/tex].

Probability is a branch of math that studies the chance or likelihood of an event occurring.
There are [tex]75[/tex] red marbles, [tx]37[/tex] white marbles, and [tex]19[/tex] blue marbles.

If a marble is randomly selected from the box, we have to find the probability that it is not blue.

Then the total number of marbles = [tex]75 + 37 + 19 = 131.[/tex]

The probability that a marble is not blue:-

[tex]P[/tex](Not blue) = [tex]P[/tex](Red or White)

[tex]P[/tex](Red or White) = [tex]\frac{(75 + 37)}{131}[/tex]

[tex]P[/tex](Red or White) = [tex]\frac{112}{ 131}[/tex]

[tex]P[/tex](Not blue) = [tex]1 - P[/tex](Blue)

[tex]P[/tex](Not blue) = [tex]1 - \frac{19}{131}[/tex]

[tex]P[/tex](Not blue) = [tex]\frac{112}{ 131}[/tex]

Therefore, the probability that a marble selected from the box is not blue is [tex]\frac{112}{131}[/tex].

Learn more about Probability here:

https://brainly.com/question/30034780

#SPJ11

The probability mass function of X( -3, -1, 1 ,3)  is P(X) 1/8 3/8 3/8 1/8.

A fair coin is flipped 3 times and the random variable X is defined as follows:

   X = 3 times the number of heads - 2 times the number of tails

To find the probability mass function of X, we can list all the possible outcomes and calculate their probabilities.

The Possible outcomes are as shown:

   3 heads (X = 3)

   2 heads, 1 tail (X = 1)

   1 head, 2 tails (X = -1)

   3 tails (X = -3)

And the Probabilities are:

   P(X = 3) = 1/8

   P(X = 1) = 3/8

   P(X = -1) = 3/8

   P(X = -3) = 1/8

Therefore, the probability mass function of X is:

X( -3, -1, 1 ,3)  is  P(X) 1/8 3/8 3/8 1/8

To Practice more questions about probability:

https://brainly.com/question/24756209

#SPJ11

Answer:

3 pounds of coffee.

Step-by-step explanation:

Equation

y = -7.37x + 80  

substitute 57.89 for y

57.89 = -7.37 + 80   Subtract 80 from both sides

57.89 - 80 = -7.37 + 80 - 80

-22.11 = -7.37x  Divide both sides by -7.37

3 = x

3 pound of coffee

Helping in the name of Jesus.

Answer:

rita received a $80 gift card for a coffee store. she used it in buying some coffee that cost $7.37 per pound. after buying the coffee, she had $57.89 left on her card. How many pounds of coffee did she buy?​

Step-by-step explanation:

Let's first find out how much money Rita spent on coffee:

$80 (initial balance) - $57.89 (remaining balance) = $22.11 spent on coffee

Now, let x be the number of pounds of coffee that Rita bought. Since the coffee costs $7.37 per pound, we can set up the equation:

$7.37x = $22.11

Solving for x, we can divide both sides by $7.37:

x = 3

Therefore, Rita bought 3 pounds of coffee.