This is various straps secured on a worker to distribute the fall arrest forces. What is depicted in the image?
A) Full-body harness
B) Connector
C) Anchor and anchor connector
Answers
Answer:
C) Anchor and anchor connector
This is various straps secured on a worker to distribute the fall arrest forces. In this image Anchor and anchor connector is depicted. Thus, option C is correct.
What is personal fall arrest system (PFAS)?A personal fall arrest system (PFAS) is made up of three major parts: a full-body harness, a shock-absorbing lanyard or retractable lifeline, and secure anchors. A personal fall arrest system (PFAS) is made up of three major parts: a full-body harness, a shock-absorbing lanyard or retractable lifeline, and secure anchors.
Body harness: Straps that can be wrapped around an employee to distribute fall arrest forces across at least the legs, pelvis, midriff, chest, and shoulders, with the ability to connect to other parts of a personal fall arrest system.
Lifeline is a component comprising of an adjustable line connected vertical direction to an anchorage at one side (vertical lifeline) or horizontally to anchorages at both ends (horizontal lifeline) and used to connect other parts of a personal fall arrest system to the anchorage.
Thus, option C is correct.
Learn more on Body harness on:
brainly.com/question/14279342
#SPJ2
Related Questions
In a wire, when elongation is 4 cm energy stored is E. if it is stretched by 4 cm, then what amount of elastic potential energy will be stored in it?
Answers
Answer:
4E
Explanation:
4E
Explanation:
From the question given above, the following data were obtained:
Initial elongation (e₁) = 4 cm = 4/100 = 0.04 m
Initial energy (E₁) = E
Final elongation (e₂) = 0.04 + 0.04 = 0.08 m
Final energy (E₂) =?
The energy stored in a s spring is given by:
E = ½Ke²
Where
E => is the energy
K => is the spring constant
e => is the elongation
From:
E = ½Ke²
Energy is directly proportional to the elongation. Thus,
E₁/e₁² = E₂/e₂²
With the above formula, we can obtain the final energy as follow:
Initial elongation (e₁) = 0.04 m
Initial energy (E₁) = E
Final elongation (e₂) = 0.08 m
Final energy (E₂) =?
E₁/e₁² = E₂/e₂²
E / 0.04² = E₂ / 0.08²
E / 0.0016 = E₂ / 0.0064
Cross multiply
0.0016 × E₂ = 0.0064E
Divide both side by 0.0016
E₂ = 0.0064E / 0.0016
E₂ = 4E
Therefore, the final energy is 4 times the initial energy i.e 4E
Answer:
4e is the answer
What regulates labeling of food, drugs, and cosmetics?
Answers
Answer:
The FDA
Explanation:
The federal food and drug administration.
Technician a says that if a tapered roller bearing is adjusted to loose
Answers
Which of the following parts tells the transmission how fast or slowly a vehicle is going? A) pump
B) governor
C) manifold
D) vacuum modulator
Answers
Hope that helps
In a wire, when elongation is 4 cm energy stored is E. if it is stretched by 4 cm find the energy stored
Answers
We know, potential energy of spring is given by (1/2)kx² where k is spring constant and x is stretched distance.
Here , x=4 cm so, U=(1/2)k*4²=8k
For, x= 4cm :-
E=(1/2)k* 4²= 8k=U.
Final potential energy will be E= U.
Which of these is an example of a service job?
(A) the person who makes sports cars in a factory
(B) the person who grows apples in an apple orchard
(C) the person who rotates the tires on your car
(D) the person who builds downtown office buildings
Answers
Answer:
brainllest if right
A
Explanation:
“In a trusting relationship, confidential information is kept confidential.” Explain what the limits to confidentiality are and give an example.
Answers
please answer got 2 minutes
Answers
Answer:
answer is option (C)
that is 60°
Which of the following are hazards associated with portable ladders?
A) Ladder is not positioned correctly
B) Ladder is too long
C) Ladder is not tied off correctly
D) Unsteady ladder
Answers
Answer:
A,C, and D
Explanation:
Potible ladders have to configure with many designs in mind but the most evedent is that they are usally unstable
BRAINLIEST PLS
The following are the hazards associated with portable ladders are:
A) Ladder is not positioned correctly
C) Ladder is not tied off correctly
D) Unsteady ladder
What are portable ladders?Portable ladders are those ladders that can be folded and light weighted and made up of plastic or steel. They are portable to be used in homes and indoors.
They are easy to transport and easy to work with because they are lightweight, and they take less space to put them. But as they are lightweight, they will easily fall down.
They contain support behind them, they don't need to tie down and need support, so there are chances of being it unsteady.
Thus, the hazards associated with portable ladders are:
A) Ladder is not positioned correctly
C) Ladder is not tied off correctly
D) Unsteady ladder
To learn more about portable ladders, refer to the link:
https://brainly.com/question/28069347
#SPJ2
Which of the following identifies a criterion needed to become a civil engineer?
a master’s degree in a specialized field
previous government experience
a Professional Engineering license
experience with a private architectural firm
Answers
Answer:
C) a Professional Engineering license
Reverse engineering is not the process of analyzing an existing product to 5 points
determine its function so that a similar product can be developed or the
original product can be improved. *
a True
B False
Answers
true
Explanation:
I order for the engineering process to be reversed it had to developed an product and had to be proved what were used to form the product
Hope this helps
Which of the following is a clear indicator that the tire is at the end of its legal life?
Select one:
A. Out-of-Balance Conditions
B. Tread depth above the level of built-in wear indicators
C. Low tire pressure
D. Tread depth below the level of built-in wear indicators
Answers
Answer:
Option D, Tread depth below the level of built-in wear indicators
Explanation:
The legal life of tire is checked by looking out for tread wear indicators. In general, tread wear indicators are nothing but small bars of width of 5 mm. These bars are built in the main grooves of the tires.
If the tire tread is at the top level of the tread wear indicating bar, then it means that tires have reached the legal limit of tire death (1.6 mm)
Hence, option D is correct
How do engineering and technology impact the natural world and environment
Answers
Answer:
Answer to the following question is as follow.
Explanation:
Civil engineering industrial development projects have a significant influence on the environment, particularly in terms of excessive noise, environmental pollution, and land shrinkage.
Engineers have totally transformed our environment, from contemporary dwellings to bridges, space flight, automobiles, and cutting-edge mobile technologies. Engineers utilise their expertise to build new and exciting prospects and address any difficulties that may occur, and they employ their innovative ideas to accomplish so.
which statement regarding vessel maintenance is true?
A- When storing a vessel for a long time, it is best to keep it in the sun and uncovered
B- when cleaning a vessel, use regular household detergents and cleaners
C- When replacing electrical parts on a vessel, never use automotive parts
D- When preparing your vessel for cold weather, use antifreeze that contains ethylene glycol
Answers
The true statement is that when a person is person is preparing their vessel for cold weather, then it's important to use antifreeze which contains ethylene glycol.
During cold weather, it's common for vessels to have their parts or engine frozen due to the weather.
The freezing of the engine can lead to an accident or spoil the vessel. Therefore, it is advisable to use ethylene glycol since it's an antifreeze and using it can prevent an accident or spoilage of the parts of the vessel.
Therefore, the correct option is D.
Read related question on:
https://brainly.com/question/23062643
How is gravitational energy converted into other forms
Answers
Answer:
Gravitational potential energy is energy due to an object's position. An object in the air has gravitational potential energy because when released, it will begin to move and convert its stored energy into movement, or kinetic energy. ... Other forms include thermal energy, which we know as heat, and sound.
what is a milling machine
Answers
Answer:
Milling machines are a type of machinery for removing material from a workpiece using rotary cutters. These machines can drill, bore, and cut an array of materials.
Explanation:
If this helps you please mark brainliest!
Have a nice day!
