The third child should sit 1.9 m from the fulcrum point or at 1.9 meters from the fulcrum, C should be seated on the sideboard.
L = 3.0 m which is the length of the board
Wight of A = 45 kg.
Weight of B = 30 kg.
now,
If suppose that B is on the right side of the seesaw, then presume that.
We can assume it as
let x be the third child's (C) separation from the fulcrum.
Since the system is in equilibrium, so, the torque on the two sides will be equal.
Here we get the value to be,
45 * 1.5 = 35 * X
X = 67.5 / 35
X = 1.92 m
Therefore, the third child should sit 1.9 m from the fulcrum point.
Learn more about fulcrum, refer: brainly.com/question/13024605
#SPJ4
What type of timer would you use to measure
the period of a simple pendulum? How many
oscillations would you time?
It is easy to measure the period using the photogate timer.
What is photogate timer?Photogate timer is used to study free fall, rolling objects, collisions, and pendulums. Photogates allow for extremely accurate timing of events within physics experiments, for studying free fall, air track collisions, pendulum periods, the speed of a rolling object, among other things.
To measure the period of a simple pendulum, we set the simple pendulum into oscillation. Let's say 10 oscillations. The time to complete this oscillation is recorded. This time is divided by the no of oscillation to get the period. Period is also measured in second.
This means that period of a simple pendulum is given as T = t/n
where T is the period and t is the time to complete a given oscillation.
learn more about photogate timer from
https://brainly.com/question/2456688
#SPJ1
a 1.8-cmcm-tall object is 22 cmcm to the left of a lens with a focal length of 11 cmcm . a second lens with a focal length of -5 cmcm is 37 cmcm to the right of the first lens.
A lens with an 11 cm focal length is 22 cm to the left of a 1.8 cm tall object. The image's height has decreased by 0.25 pixels when a second lens with a focal length of -5cm is placed 37cm to the right of the first lens.
Let's determine the distance at which the image is formed from the first lens since the image of the first lens serves as a virtual object for the second lens. Use the lens manufacturer's formula:
1/o + 1/i = 1/f, where I am the image distance and o is the object distance,
1/i = 1/f - 1/o = 1/(11cm) - 1/(22cm) = 0.045 1/cm, so
i = 22cm
the virtual object for the second lens is left at a distance of 37 cm - 22 cm, or 15 cm, from the second lens. Utilize the lens manufacturer's formula once more:
1/i = 1/f - 1/o (This time, the object distance is the separation between the second lens and the virtual object.)
1/i = 1/(-5cm) - 1/(15cm) = -0.26 1/cm, so
i = -15/4cm away from the second lens.
The sum of the two magnifications from the two lenses is the total magnification: m = m1m2, where m = -i/o, so
m = (-22 cm/22 cm)( 15/4cm/15cm) = -0.25, Consequently, the image's height is 0.25 pixels shorter than it was before.
It is the inverse of the system's optical power that determines how strongly an optical system diverges or converges light: the focal length. The convergence or divergence of light is indicated by a positive focal length, whilst the opposite is true for a negative focal length.
Learn more about focal length here:
https://brainly.com/question/15365254
#SPJ4
Which of the following is/are accurate? (select any that apply)
a muscle cell has many nuclei
the muscle cell membrane is called the sarcolemma
muscle cells have multiple mitochondria
a muscle cells has one myofibril
The accurate statements about muscle cells are:
the muscle cell membrane is called the sarcolemmamuscle cells have multiple mitochondriaWhat are the features of a muscle cell?A muscle cell also known as a myocyte is a cell that has differentiated with contractility ability.
The muscles differ according to the type of muscle.
There are two types of muscles; smooth muscles and skeletal muscles.
The features of skeletal muscle cells include:
they are long, cylindrical, multi-nucleated, and striatedThe features of smooth muscle cells include:
they contain thick and thin filaments and are non-striated.Muscles cells contain many mitochondria and myofibrils.
Learn more about muscle cells at: https://brainly.com/question/13920046
#SPJ1
A sinusoidal transverse wave of wavelength 20 cm travels along a string in the positive direction of an x axis. The displacement y of the string particle at x=0 is given in Fig. 16-34 as a function of time t. The scale of the vertical axis is set by y s =4.0 cm. The wave equation is to be in the form y(x,t)=y msin(kx±ωt+ϕ). (a) At t=0, is a plot of y versus x in the shape of a positive sine function or a negative sine function? What are (b) y m(c) k (d) ω (e) ϕ (f) the sign in front of ω and (g) the speed of the wave? (h) What is the transverse velocity of the particle at x=0 when t=5.0 s?
The transverse velocity of the particle at x=0 when t=5.0 s is 2.5 cm/s.
y(x,t) = ymsin(kx +- wt + Ф)
(a). At t =0 , y verses x is positive sine function
(b). Ym = y5 = 4 cm
(c). k = 2Π/λ = (2*3.14)/20 = 0.314 rad cm⁻¹
(d). w = 2Πf = 2Π/T = (2*3.14)/10 = 0.628 rad/sec
(e). since at t =0 , x= 0
y = Ym sinΦ
but y = 0 from graph
sinΦ = 0 Φ=0
(f). sin in front of w is 't'
(g) . speed = v= w/k = 0.628/0.314 = 2cm/s
(h) . at x = 0
y = ym sinwt
vy = dy/dt= wym constant
= 0.628*4*cos(0.628*5)
vy = 2.5 cm/s
Wavelength is the spatial period of a periodic wave, i.e. the distance over which the wave shape repeats. [1][2] This is the distance between successive corresponding points of the same phase in the wave. B. Two adjacent peaks, valleys, or zero crossings, characteristic of both traveling and standing waves and other spatial wave patterns.
The reciprocal of wavelength is called spatial frequency. Wavelength is usually represented by the Greek letter lambda (λ). The term wavelength is also sometimes applied to the sinusoidal envelope of modulated waves and waves formed by interference of modulated waves or multiple sinusoids.
Learn more about wavelength here : https://brainly.com/question/10728818
#SPJ4
Light of 650 nm wavelength illuminates a single slit of width 0.20 mm. (Figure 1) shows the intensity pattern seen on a screen behind the slit. You may want to review (Pages 941 - 943) . Figure1 of 1The graph shows intensity as a function of distance. Distance is measured from 0 to 3 centimeters on the x-axis. No values or units are given for the intensity on the y-axis. A large central peak is positioned at 1.5 centimeters with much smaller secondary and tertiary peaks flanking it. The width of the central peak is 1 centimeter. The secondary peaks are positioned at approximately 0.67 centimeters and 2.3 centimeters. The graph shows intensity as a function of distance. Distance is measured from 0 to 3 centimeters on the x-axis. No values or units are given for the intensity on the y-axis. A large central peak is positioned at 1.5 centimeters with much smaller secondary and tertiary peaks flanking it. The width of the central peak is 1 centimeter. The secondary peaks are positioned at approximately 0.67 centimeters and 2.3 centimeters.
Part A What is the distance to the screen? Express your answer to two significant figures and include the appropriate units.
The intensity pattern visible on a screen behind the slits can be stated to depend on the screen's distance (d=1.168m).
How to solve ?From the question we are told,
Two slits that are 0.20 mm apart are illuminated by 650 nm light. The intensity pattern shown on a screen behind the slits is depicted in (Figure 1).
Typically, the mathematical formula for the distance is as follows:
[tex]d = \sqrt{(x_2 - x_1)^2 + (y_2-y_1)^2}[/tex]
d=0.33x10^-2x0.23x10^-3/650x10^-9
d=1.168m
What purpose does the distance formula serve?The distance formula is a formula used to determine how far apart two places are from one another. The dimensions of these points are unlimited. For instance, you could need to determine the separation between two points in space, a plane, or a line (1, 2, or 3 dimensions) (3d).
How far is that?Distance is the overall, directionless movement of an object. Distance can be characterized as the amount of space an object has covered, regardless of the starting or ending location.
Learn more about distance here:
https://brainly.com/question/26711747
#SPJ4
FILL IN THE BLANK. the density of a gold nugget is 19.3 g/cm3. if the volume of the gold nugget is 0.00369 l, the mass of the nugget is___g.
A gold nugget has a density of 19.3 g/cm3. The mass of the gold nugget is 71.22 g if the nugget has a volume of 0.00369 l.
How does density work?Mass per unit volume of a material substance; density. Density is defined as d = M/V, where M stands for mass, and V for volume. The unit of density that is most frequently used is grams per cubic centimeter.
Density = 19.3g/cm³
Volume = 0.00369l
mass = ?
Formula
Density = mass/ volume
mass = density x volume
Convert volume from liters to cubic centimeters
1 l -------- 1000 cm³
0.00369l --------- x
x = (0.00369 x 1000 )/1
x = 3.69 cm³
Substitution
mass = 19.3 x 3.69
mass = 71.22 g.
To know more about density visit:
https://brainly.com/question/14449989
#SPJ4
(a) Find the amplitude, frequency, and period of motion for an object vibrating at the end of a horizontal spring if the equation for its position as a function of time is the following. x = (0.225 m) cos ???? 8.00 t A = m f = Hz T = s (b) Find the maximum magnitude of the velocity and acceleration. vmax = m/s amax = m/s2 (c) What are the position, velocity, and acceleration of the object after 1.45 s has elapsed? x = m v = m/s a = m/s2
When a function p(x) determines location, the velocity and acceleration are its first and second derivatives, respectively.
The equation a = v/t denotes acceleration (a), which is the change in velocity (v) over the change in time (t). This enables you to calculate the change in velocity in meters per second squared (m/s2). Since acceleration is a vector quantity, both its magnitude and its direction are included. The speed and direction of an object's motion are its velocity. Alternatively put, velocity is the pace at which an object's position changes (where position incorporates direction by specifying whether the object is moving backwards or forwards on a line, or moving sideways or up and down in two or three dimensions).
to know more about acceleration please visit.
https://brainly.com/question/12550364
#SPJ4
find the amplitude, frequency, and period of motion for an object vibrating at the end of a horizontal spring if the equation for its position as a function of time is the following.
The amplitude is 0.25s.
Calculation:
Amplitude = A = 0.225 m
Angular frequency = w = 8π rad/s.
Frequency = f = w/2π = 8π/2πHZ = 4 HZ
Time period = T = 1/f = (1/4)s = 0.25s.
The maximum displacement or distance traveled by a point on an oscillating body or shaft, measured from the equilibrium position. This corresponds to half the length of the vibration path. Amplitude difference between a rest position and maximum shaft deflection.
Frequency The number of waves passing a particular point per second. Duration How long it takes for a wave cycle to complete. Sound wave amplitude is a measure of wave height. The amplitude of a sound wave can be defined as the magnitude or loudness of the maximum displacement from the average position of the vibrating particles in the medium when the sound was produced.
Learn more about The amplitude here:- https://brainly.com/question/3613222
#SPJ4
The bullet strikes a block of wood which exerts, on average, a force of 50,000 N opposing the motion of the bullet. How far does the bullet penetrate?
The distance that the bullet penetrates is 0.03m.
How to solve?Given data:
The mass of the bullet is
m = 25 g = 0.025 kg
The bullet's initial velocity is
u = 350 m/s
The final velocity of the bullet is
v = 0
The average force opposing the motion is
F = 50000N
From Newton's second law, the acceleration derived as,
F = m. a.
a = F. m..........(1)
Substituting values in equation (1), we get:
a = 50000 N / 0.025 kg = 2×106 m/s 2
The equation of motion is,
v 2=u 2−2 a S
2 a S=u 2−v 2
S = u 2−v 2/2 a.......(2)
Substituting values in equation (2), we get:
S = (350 m/s)2−0/2(2×106 m/s 2)
=12.25×104 m/s 4×106 m/s 2=0.03m
here, the distance that bullet penetrates is 0.03m.
What is the kinetic energy equation?Kinetic energy has the following formula: K.E. = 1/2 m v 2, where m is the object's mass and v is its square velocity. The kinetic energy is measured in kg/m per second squared if the mass is measured in kg and the velocity is measured in meters per second.
Which 4 forms of kinetic energy are there?Radiant, thermal, electrical, and mechanical kinetic energies are the basic categories.
Learn more about kinetic energy here:
https://brainly.com/question/17858145
#SPJ1
human activities, such as agriculture, can require altering the land. i. identify an environmental problem associated with large-scale intensive agriculture on soil.
Intensive agriculture leads to ecosystem loss and contributes to global warming.
Intensive agriculture is a farming method that uses large amounts of labor and investment to increase the yield of the land.
Human beings form an integral part of the environment and have the largest ecological footprint.The environment has suffered for thousands of years due to human activity.Intensive agriculture is generally aimed at feeding a large population of people, however, this method has contributed as one of the biggest threats to the global environment as it leads to ecosystem loss and global warming.It is responsible for 80 percent of tropical deforestation and the emergence of new parasites and the reappearance of parasites that were once under control.It reduces beneficial plants and insects and depletes and degrades the soil on which they depend.Thus intensive agriculture results in soil erosion followed by the genetic erosion of livestock and crop species worldwide.
To know more about Intensive agriculture,
https://brainly.com/question/14864710
#SPJ4
A 20 kg crate is placed on a horizontal conveyor belt. The materials are such that μs = 0.41 and μk = 0.21. Draw a free-body diagram showing all the forces on the crate if the conveyer belt is speeding up to the right What is the maximum acceleration the belt can have without the crate slipping? If acceleration of the belt exceeds the value determined in part C, what is the acceleration of the crate?
The maximum acceleration for the belt that the slipping of the crate does not appear is 2 m/s².
what is a belt?
Each rotating pulley is supported on a shaft by a belt drive, which transfers motion from one to the next.Pulley belts are often manufactured from a soft, flexible material such as rubber, although shafts and pulley wheels can be made of any material. The pulleys and belts' grooves aid in their ability to grasp and turn.The frictional force between the two surfaces increases with the amount of wrap around the curved surface, and only a portion of that force (or the resulting belt tension) is transmitted to the other end of the belt or rope when a force applies tension to one end of a belt or rope wrapped around a curved surface. The Belt friction equation can be used to model belt friction.To learn more about belt refer to
https://brainly.com/question/11477019
#SPJ1
The elevator descends with an acceleration of 0.9 m/s². Find how much a 95 kg person weighs in it at the moment of descent.
the free-fall acceleration at the surface of planet 1 is 12 m/s2m/s2. the radius and the mass of planet 2 are twice those of planet 1. What is the free-fall acceleration on planet 2? Express your answer using two significant figures. m/s^2.
The free-fall acceleration on the planet 2 will be 6 m/sec².
Acceleration is the rate of change of velocity with respect to time.
Also it defines the maximum capacity of a vehicle to attain its speed.Its SI unit is m/sec².As we know that acceleration due to gravity can be expressed as
g = MG / R²
M = mass of the planet
G = Gravitational constant
R = radius of the planet
For planet 1
Mass = M1 = M
Radius = R1 = R
Acceleration due to gravity = g1 = 12 m/sec²
G = g1R1²/M1
For planet 2
Mass = M2 = 2M
Radius = R2 = 2R
Acceleration due to gravity = g2 = ?
G = g2R2²/M2
Since 'G' is constant, therefore on equating both the equations, g2 can be calculated
g2 = (g1R1²/M1) * (M2/R2²)
g2 = (12R²/M) * (2M/4R²)
g2 = 6 m/sec²
The free-fall acceleration on planet 2 will be 6 m/sec².
To know more about acceleration,
https://brainly.com/question/14422223
#SPJ4
The principle of connectedness would most likely lead you to perceive all the ________ as parts of a single unit.
A) words in a sentence
B) clouds in the sky
C) rungs in a ladder
The principle of connectedness would most likely lead you to perceive all the (c) rugs in a ladder as part of a single unit.
The law of unified connectedness states that elements that are connected to each other using colours, lines, frames, or other shapes are perceived as a single unit when compared with other elements that are not linked in the same manner.
In quantum mechanics, there's a phenomenon called entanglement. Entanglement really does connect things in different places for a very specific definition of “connect”. And there’s a real (but complicated) sense in which these connections end up connecting everything.
To know more about Principle of Connectedness:
https://brainly.com/question/14414320
#SPJ4
Approximately, ___ municipal solid waste landfills in the United States combust landfill gas to generate heat and electricity
400
Approximately, 400 tons of municipal solid waste landfills in the United States combust landfill gas to generate heat and electricity
What is municipal waste?We know that municipal waste has to do with the waste products that can be obtained from the activities that go on in the city. the magnitude of the municipal waste that is generated in a place would have a lot to do with the population of the area as well as the industrial saturation of the area.
This is the reason why the areas that have less population and the industries that are there are not so much do not expirience a lot of pollution and do not have a large amount of waste water that goes out as sewage.
The solid wastes that are generated in the United States is just as large as the sewage that is generated in the united states and calls for a very urgent attention.
Learn more about solid waste:https://brainly.com/question/14665452
#SPJ1
If two metal blocks of different masses slide freely down the same frictionless incline,
which one of the following is true?
A) They have equal accelerations
B) They have unequal accelerations, but the forces acting on them are equal.
C) The more massive block reaches the bottom first.
D) The less massive block reaches the bottom first.
E) None of these is correct.
If two metal blocks of different masses slide freely down the same frictionless incline, option a is correct.
Objects accelerate due to imbalanced forces. However, not every item accelerates at the same rate in the presence of the same imbalanced force. As a result, the speed and net force in the direction perpendicular to the plane must both be zero. Since the plane is assumed to be "frictionless," no force is applied to the block that is perpendicular to the surface by the plane. The acceleration is determined by multiplying the acceleration of gravity by the sine of the angle for a frictionless incline of angle degrees. The force of gravity is not parallel to the surface when there is an inclination. The normal force diminishes as the angle of the incline increases, which reduces the frictional force. You can increase the inclination until the thing barely starts to slip.
to know more about frictionless incline please visit.
https://brainly.com/question/22849887
#SPJ4
In the figure; two point sources S1 and S2, Which are in phase and emit identical sound waves of wavelength 2.0 m: The length L1 = 21 m. A listener stands at point P: Assume the amplitude of individual sound reaching at point P does not change, the sound that the listener hears willl be least intense if the L2 is
The length L₂ for destructive interference is L₂ = 22 m
What is a sound wave?A sound wave is a mechanical wave which carries sound energy from one point to another.
How to find the point L2?Since two point sources S₁ and S₂, Which are in phase and emit identical sound waves of wavelength 2.0 m: The length L₁ = 21 m. A listener stands at point P: Assume the amplitude of individual sound reaching at point P does not change, to find L₂, we need to know the path difference for destructive interference.
What is path difference for destructive interference?The path difference for destructive interference is given by ΔL = (n + 1)λ/2
where
ΔL = path difference = L₂ - L₁, λ = wavelength and n is an integer.Since we require the least intensity, we have the minimum interference. So, n = 0.
So, ΔL = (n + 1)λ/2
ΔL = (0 + 1)λ/2
L₂ - L₁ = λ/2
So, making L₂ subject of the formula, we have
L₂ = L₁ + λ/2
Given that
L₁ = 21 mλ = 2.0 mSubstituting the values of the variables into the equation, we have that
L₂ = L₁ + λ/2
L₂ = 21 m + 2.0 m/2
L₂ = 21 m + 1 m
L₂ = 22 m
So, the length L₂ = 22 m
Learn more about destructive interference here:
https://brainly.com/question/14673752
#SPJ1
What is the weight of an 11 kg crate?
When completely filled with apples, the crate weighs 15 kg; when only 2/3 full, it weighs 11 kg; and when only 1/3 full (with only 1/3 of the crate's apples), it weighs 15-11=4 kg.
What does it mean to weigh?Definition of WEIGH in the Britannica Dictionary. She measures herself every morning in order to determine how heavy she is. 1. a [+ object]: to determine (someone or something's) weight. The bananas were weighed using a scale.
what are they Weight scales?To quantify weight or mass, one uses a scale or balance. These are also referred to as weight balances, mass balances, and scales of both mass and weight.
To know more about weigh visit:
https://brainly.com/question/17300138
#SPJ1
There are two forces on the 2.00kg box in the overhead view of Fig., but only one is shown. For F 1 =20.0N,a=12.0m/s 2, and θ=30.0 o, find the second force (a) in unit-vector notation and as (b) a magnitude and (c) an angle relative to the positive direction of the x axis.
The unit vector of the second force is [tex]\frac{-32i-12.3^1/2}{38.16}[/tex], and its magnitude is 38.16N and the angle is 147 with a positive x-axis.
According to the question
a= 12m/s^2
m=2kg
F=24N
Fx= Fsin30 = 24.1/2=12
= 12(-i)
Fy= Fcos30 = 12√3N
= 12√3(-j)
F=-12i-12√3j
F1=20j, F2=F-F1= -32i-12√3j
F2=38.16N
(a) Unit vector = [tex]\frac{F2}{|F2|}[/tex] =[tex]\frac{-32i-12.3^1/2}{38.16}[/tex]
(b)Magnitude= 38.16N
(c) Angle= [tex]tan^{-1}[/tex][tex]\frac{y}{x}[/tex] = 33 means 33 with - x axis. so with the + x-axis it will be 180-33= 147
Therefore
The unit vector of the second force is [tex]\frac{-32i-12.3^1/2}{38.16}[/tex] and its magnitude is 38.16N and the angle is 147 with a positive x-axis
Learn more about forces:
https://brainly.com/question/25239010
#SPJ4
in 1.8 hours a sailboat sailed 81 kilometers east across the sea at a constant velocity. what was the sailboats velocity?
The velocity of the sailboats at sailed a distance of 81 km is 12.5 m/s.
What is velocity?
Velocity is the rate of change of displacement.
To calculate the velocity of the sailboats, we use the formula below.
Formula:
v = d/t................. Equation 1Where:
v = Velocity of the sailboatsd = Distancet = TimeFrom the question,
Given:
d = 81 km = 81000 mt = 1.8 hours = 1.8×60×60 = 6480 sSubstitute these values into equation 1
v = 81000/6480v = 12.5 m/sHence, the velocity is 12.5 m/s.
Learn more about velocity here: https://brainly.com/question/24445340
#SPJ1
Two blocks on a surface of negligible friction are attached together by a spring, as shown in the figure above. The mass of block 1 is MM, and the mass of block 2 is 2M. Block 1 is initially moving toward block 2, which is at rest. The spring compresses and decompresses in a repeated motion as the two blocks slide to the right. Which of the following statements best describes the speed of the center of mass of the two-block system?
In the absence of an external force, the total linear momentum of the system maintains conservation, indicating that the speed of the system's center of mass is constant.
This is because the spring force between the masses acts as an internal force between the two masses.
The product of an object's mass, m, and velocity, v, is known as linear momentum, and it is a vector quantity. In order to express it and refer to momentum informally, the letter "p" is utilized. You should be aware that a body's momentum always points in the same direction as its velocity vector. Because it is a conserved quantity, the overall momentum of a system is always constant. Linear momentum is measured in kg/s.
The total linear momentum prior to an object's interaction and the total linear momentum following that interaction is identical. Any system of objects that is subject to no net external force has a constant total linear momentum.
Learn more about linear momentum here:
https://brainly.com/question/27988315
#SPJ4
billy lifts a 2.0 kg bucket straight up with a force of 30.0 n. what is the acceleration of the bucket? (draw a free body diagram)
The acceleration when Billy lifts a 2.0 kg bucket straight up with a force of 30.0 N is 15 m/s² and free body diagram is attached in the figure..
The force due to gravity will be balanced by the force with which Billy lifts the bucket. Thus, equating the two force -
F (due to gravity) = ma (due to lifting), where m is mass and a is acceleration due to gravity.
30 = 2 × a
a = 30/2
Performing division
a = 15 m/s².
Thus, the acceleration of the bucket is 15 m/s². The free body diagram is attached in the figure. In the diagram, the blue colour ball can be assumed as bucket.
Learn more about force -
https://brainly.com/question/12785175
#SPJ4
one of the strongest emission lines observed from distant galaxies comes from hydrogen and has a wavelength of 122 nm (in the ultraviolet region).
(a) The galaxy moves with a velocity of 0.8 c away from us.
(b) When the galaxy moves towards us we observed that the wavelength of the line is 40.67 nm.
We know that,
The relativistic Doppler effect when the galaxy is moving away from us
In this case, when the source moves away from the observer its frequency ([tex]f[/tex]) is lower than the emitted frequency ([tex]f_{0}[/tex]) and the preceding wavelength ([tex]\lambda[/tex]) is higher than the emitted wavelength ([tex]\lambda_{0}[/tex]).
[tex]f=f_{0} \sqrt{\frac{1-\frac{u}{c} }{1+\frac{u}{c} } }[/tex]
[tex](\frac{\lambda_{0} }{\lambda})^{2} = \sqrt{\frac{c-u}{c+u} }[/tex]
Given that
[tex]\lambda_{0} =122 nm\lambda=366nm[/tex]
So
[tex](\frac{122}{366} )^{2} =\frac{c-u}{c+u} \frac{1}{9} = 8cu=0.8c[/tex]
Where c is the velocity of light it is equal to [tex]3*10^{8} m/s[/tex].
So when the galaxy moves towards us we observed that the wavelength of the line is 40.67nm.
(b) When the galaxy moves towards us its wavelength is shorter than the emitted wavelength.
The expression of the wavelength in this case is given by
[tex]\frac{\lambda _{0} }{\lambda } =\sqrt{\frac{c-u}{c+u} }[/tex]
= 40.67 nm
Learn more about wavelength here
https://brainly.com/question/10728818
#SPJ4
A diffraction grating is illuminated simultaneously with red light of wavelength 690 nm and light of an unknown wavelength. The fifth-order maximum of the unknown wavelength exactly overlaps the fourth-order maximum of the red light. What is the unknown wavelength?
According to the given statement 414 nm is the value of the unknown wavelength.
What is wavelengths and frequency?The distance between two wave crests, which also applies to troughs, is known as the wavelength. Cycles per second (Hz), the number of vibrations that pass across a certain region in a second, is used to measure frequency (Hertz). The link between wavelength and frequency is discussed in this article.
Briefing:For third order maxima,
asinθ = mλ
asinθ = 3 * 690
The slit width in this instance is a, and the angular spacing is.
The fifth order maximum, meanwhile
asinθ = mλ
asinθ = 5λ
Solving as,
5λ = 3 * 690
λ = 414 nm
Therefore, 414 nm is the value of the unknown wavelength.
To know more about Wavelength visit:
https://brainly.com/question/13533093
#SPJ4
In a mass spectrometer, a specific velocity can be selected from a distribution by injecting charged particles between a set of plates with a constant electric field between them and a magnetic field across them (perpendicular to the direction of particle travel). If the fields are tuned exactly right, only particles of a specific velocity will pass through this region undeflected. Consider such a velocity selector in a mass spectrometer with a 0.105 T magnetic field. 50% Part (a) What electric field strength, in volts per meter, is needed to select a speed of 3.9 x 10 m/s? Grade Summary Deductions 090 Potential 100% sino cos tan) cotan asino acos atan) acotan sinho cosho tanho) cotanho Degrees Radians 7 8 9 E4 5 6 1 2 3 0. VOCAL Submissions Attempts remaining 20 per attempt) detailed view Submit Hint French I give up! Hints: O deduction per hint. Hints remaining 2 Feedback: deduction per feedback 50% Part (b) What is the voltage, in kilovolts, between the plates if they are separated by 0.95 cm?
The electric field strength in volts per meter is calculated to be 4.095 V/m.
Given that, speed v = 3.9 * 10 m/s
Magnetic field B = 0.105 T
Using the mass spectrometer velocity selector relationship between the electric field and magnetic field is,
v = E/B
Where,
v is the speed selector
B is magnetic field
E is electric field
Therefore, E = vB
E = 3.9 × 10 × 0.105
E = 4.095 V/m
Thus, electric field E is 4.095 V/m.
The question is incomplete. The complete question is 'What is the electric field strength in volts per meter?'
To know more about electric field:
https://brainly.com/question/15414535
#SPJ4
A uniform rod of length L, mass M, is suspended by two thin strings. Which of the following statements is true regarding the tensions in the strings?
the following statements is true regarding the tensions in the strings is T2 = 0.6 T1 .
How can you tell how taut a string is?A specific strand, string, or rope is put under stress by the forces pulling on it from each end.Consider the formula for force: mass times acceleration.
What alters a string's tension?Every gauge of a string, the duration of the vibrating string, as well as the frequency of a vibrations along the duration of the string all work together to determine the overall stress on the string. Depending on what kind of metal was used to connect the strings, they may have a varying tension.
To know more about tensions visit:
https://brainly.com/question/15880959
#SPJ4
Scientists are now targeting Europa, one of Jupiter's moon, as a likely site for searching elementary life-forms because
Jupiter's moon Europa is regarded as one of the solar system's most promising locations to look for indications of modern life.
The geophysical characteristics of Europa, particularly the potential existence of an ocean of subglacial water, raise the prospect that human life could exist on or below the surface. The solar system's frozen moon Europa of Jupiter may provide the greatest promise for discovering modern settings conducive to life outside of Earth. Scientists have made progress in their quest to determine whether extraterrestrial life actually does exist. The best contender for alien habitability in our solar system is Jupiter's moon Europa. The hypothesis that life could exist in the inner ocean of Jupiter's moon Europa is supported by a new model created by NASA scientists.
to know more about Jupiter's moon please visit.
https://brainly.com/question/20979520
#SPJ4
dr. bronfman has administered her new 100-item test of abstract reasoning to a large sample of students. she is presently comparing their scores on the odd-numbered questions with those on the even-numbered questions in an effort to
Determine the test's reliability. Test-retest reliability is a metric of dependability that is acquired by giving the same test to a set of people twice over time.
How long should reliability tests be repeated?Although the ideal testing interval will vary depending on the construct being assessed, its stability over time, and the target population, several research have demonstrated that the target time of 2 weeks is the most frequently advised interval [15].
Interrater reliability between tests is it?The degree to which various raters and observers provide consistent estimates of the same occurrence is measured by inter-rater or inter-observer reliability. Test-Retest Reliability: Used to evaluate a measure's consistency across time.
Learn more about abstract here:
https://brainly.com/question/29602350
#SPJ1
the rod has a diameter of 40 mm. if it is subjected to the force system shown, determine the stress components that act at point a, and show the results on a volume element located at this point
In this case, we are given that the rod is subjected to the force system shown in the figure. There is a vertical force F acting on the rod at point A, as well as a horizontal force P. The rod is also subjected to a moment M about the z-axis.
To determine the stress components that act at point A, we need to consider the forces that are acting on a small volume element located at this point.
The stress on a volume element is defined as the force acting on the element per unit area. The stress components at a point can be represented by a stress tensor, which is a 3x3 matrix with nine elements. The diagonal elements of the stress tensor represent the normal stress components, while the off-diagonal elements represent the shear stress components.
To determine the stress components at point A, we need to consider how these forces are distributed over the surface of the volume element. The normal stress components can be found by considering the forces acting perpendicular to the surface of the element. The shear stress components can be found by considering the forces acting tangent to the surface of the element.
For example, the normal stress component in the x-direction at point A can be found by considering the force F acting perpendicular to the surface of the element in the y-direction. The normal stress component in the y-direction at point A can be found by considering the force P acting perpendicular to the surface of the element in the x-direction. The shear stress component in the XY-plane at point A can be found by considering the moment M acting tangent to the surface of the element.
To determine the specific values of the stress components, we would need to know the dimensions of the volume element, as well as the magnitudes of the forces and moments acting on the rod. With this information, we can use the equations of statics to solve for the stress components at point A.
Learn more about stress at
https://brainly.com/question/29562047?referrer=searchResults
#SPJ4
A triathlon athlete swims at an average rate 2.4 miles per hour, and bikes at an average rate of 16.1 miles per hour. At the end of one training session, she has swum and biked more than 20 miles in total.
The inequality and this graph represent the relationship between the hours of swimming, , the hours of biking, , and the total distance the athlete could have traveled in miles. Graph of an inequality. Hours of biking. Hours of swimming.
Mai said, "I'm not sure the graph is right. For example, the point is in the shaded region, but it's not realistic for an athlete to swim for 10 hours and bike for 3 hours in a training session! I think triathlon athletes generally train for no more than 2 hours a day."
Write an inequality to represent Mai's last statement. Graph the solution set to your inequality. Determine a possible combination of swimming and biking times that meet both the distance and the time constraints in this situation.
Elena is considering buying bracelets and necklaces as gifts for her friends. Bracelets cost $3, and necklaces cost $5. She can spend no more than $30 on the gifts. Elena needs at least 7 gift items.
This graph represents the inequality , which describes the cost constraint in this situation.
Let represent the number of bracelets and the number of necklaces.
Graph of inequality. Number of necklaces. Number of bracelets.
Write an inequality that represents the number of gift items that Elena needs.
On the same coordinate plane, graph the solution set to the inequality you wrote.
Use the graphs to find at least two possible combinations of bracelets and necklaces Elena could buy.
Explain how the graphs show that the combination of 2 bracelets and 5 necklaces meet one constraint in the situation but not the other constraint.
Combination of swimming and biking times that meets distance and the time constraints in this situation is s + b ≤ 2. An inequality that represents number of gift items that Elena needs is : 3b+5n≤30.
How is the inequality equation written?If athletes train for not more than 2 hours a day, then the sum of the hours training swimming 'a' and biking 'b' should be less than or equal to 2. Hence, we can write the following inequality:
s + b ≤ 2
Inequality that represents Mai's statement is:
s + b ≤ 2
Part 2:
It is given that , bracelets cost $3, necklaces cost $5 and she can spend not more than $30
Then the inequality that represents the number of gift items that Elena needs : 3b+5n≤30
To know more about inequality equation, refer
https://brainly.com/question/11234618
#SPJ1
