tìm chỉ số của A1 và A2

Answer:

v = 26.54 m/s

Explanation:

Given that,

The mass of a hockey puck, m = 0.21 kg

The kinetic energy of the hockey puck, E= 74 J

We need to find the speed of the hockey puck. Let the speed is v. We know that, the kinetic energy is given by :

[tex]E=\dfrac{1}{2}mv^2[/tex]

Where

v is the speed

So,

[tex]v=\sqrt{\dfrac{2E}{m}} \\\\v=\sqrt{\dfrac{2\times 74}{0.21}} \\\\v=26.54\ m/s[/tex]

So, the speed of the hockey puck is 26.54 m/s.

Answer:

Mass, m = 146.72 kilograms

Explanation:

Given the following data;

Kinetic energy = 190 J

Velocity = 2.59 m/s

To find the combined mass of the girl and her bike;

Kinetic energy can be defined as an energy possessed by an object or body due to its motion.

Mathematically, kinetic energy is given by the formula;

K.E = ½mv²

Where;

K.E represents kinetic energy measured in Joules.

M represents mass measured in kilograms.

V represents velocity measured in metres per seconds square.

190 = ½*m*2.59

Cross-multiplying, we have:

380 = 2.59m

Mass, m = 380/2.59

Mass, m = 146.72 kilograms

Answer:

The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds

The Photon is million year old while the neutrino is just some minutes old as observed by the student .

Explanation:

Although The Photon ( sunshine from the sun's surface ) heating up the student standing on the Earth's surface and the neutrinos discovered by the other student inside the gold mine are both formed in the Sun's core.

The difference between both are

The photon takes millions of years to reach the Surface of the sun while the Neutrinos travelling at the speed of light reaches the surface of the sun in approximately 2 seconds

The Photon is million year old while the neutrino is just some minutes old as observed by the student .

The options missing are;

A. Make only a few changes to the manipulated variable.

B. Identify any biases about the answer to the scientific question.

C. Include as many details as possible when writing the conclusion.

D. Share her ideas through peer review.

Answer:

B. Identify any biases about the answer to the scientific question.

Explanation:

Since the question is asking what can be done to improve the quality of the results, it means what can the scientist do to make sure that the result answers the question properly and has little or no biases.

Thus, looking at the options, the only one that comes close to actually improving on the quality of the results before finalizing is option B where the scientist is to identify any biases.

Answer:

Here's your answer: The wheelbarrow's wheel and axle help the wheelbarrow to move without friction thus making it easier to push or pull. That's why it will be easier to lift a load in wheel barrow of the load is transferred towards the wheel.

Explanation:

Answer:

Explanation:

The wheel barrows wheel and axle helps the wheelbarrow to move without friction this making it easier to push or pull.thats why it will be easier to lift a load in a wheelbarrow if it's transferred towards the wheel..

Hope it helps

Answer:

a)  [tex]F_{net}=0[/tex]

b)  [tex]T=0[/tex]

Explanation:

From the question we are told that:

Dimensions:

[tex]L*B=22.0*35.0cm[/tex]

Current [tex]I=1.40A[/tex]

Magnetic field [tex]B=1.40[/tex]

Therefore

[tex]Area=L*B[/tex]

[tex]A=22.0*35.0cm[/tex]

[tex]A=770cm=>770*0^{-4}[/tex]

a)

Generally Force on Looping gives

[tex]F_1-F_2[/tex]

[tex]F_3=F_4[/tex]

Therefore

[tex]F_{net}=0[/tex]

b)

Generally the equation for Torque is mathematically given by

[tex]T=i*Asin \theta[/tex]

Since A and B are on opposite direction

[tex]\theta=180[/tex]

Therefore

[tex]T=1.40*770*10^{-4}sin 180[/tex]

[tex]T=0[/tex]

Pedaling forward over the bike with the increase in your applied force would decrease your acceleration. Thus, option B is correct.

Acceleration is define as the rate at which velocity changes with time, in terms of both speed and direction. The equation for acceleration is:

a=F/m

where, a = acceleration,

F = force applied

m =  mass of the object

The acceleration of an object depends directly upon the net force acting upon the object, and inversely upon the mass of the object.

As the force acting upon an object is increased, the acceleration of the object is increased. As the mass of an object is increased, the acceleration of the object is decreased.

Therefore, if you are pedaling forward on your bike then a increase in your applied force would decrease your acceleration. Thus, option B is correct.

Learn more about acceleration here:

https://brainly.com/question/980919

#SPJ5

Answer:

I just did it. A is right.

Explanation:

Answer:

A is the answer!

Explanation:

Edge 2021

Answer:

A

Explanation:

Edge

Answer:

Explained below

Explanation:

Generally speaking, we know in physics that Electric field lines are lines which usually start at positive charges and deflect away from them to terminate at the negative charges. Meanwhile Equipotential lines are lines that are used to connect points located on the same electric potential.

Finally, in conclusion, electric field lines are usually lines that go through in a perpendicular manner across every equipotential lines.

Answer:

The road surface is always rough, so the frictional force between the tires and the road surface make it difficult to maintain constant speed because acceleration always changes.

By the work-energy theorem, the total work done on the mass as it swings is

W = ∆K = 1/2 (18 kg) (17 m/s)² = 153 J

No work is done by the tension in the string, since it's directed perpendicular to the mass at every point in the arc. Similarly, the component of the mass's weight mg pointing perpendicular to the arc also performs no work.

If we ignore friction/drag for the moment, the only remaining force is the parallel component of weight, which performs mgh = (176.4 N) h of work, where h is the vertical distance between points A and B.

Now, if w is the amount of work done by friction/air resistance, then

(176.4 N) h - w = 153 J

If you know the starting height h, then you can solve for w.

Answer:

The answer should be: 1.20 A

Explanation:

Answer:

According to this direction of force is perpendicular to the direction of current and magnetic field. Therefore force is opposite to electron into the paper at 90°.

Answer:

a. i. 35.96 μC  b. i. 11.98 μC ii. 24.04 μC

Explanation:

We need to find the total capacitance of the system C.

The total capacitance of the parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor is C' = 1.47 μF + 2.95 μF = 4.42 μF.

C' = 4.42 μF is in series with the 4.89 μF capacitor and for a series combination of capacitors, we have the total capacitance, C from

1/C = 1/4.42 μF + 1/4.89 μF

1/C = (4.42 μF + 4.89 μF)/(4.42 μF × 4.89 μF)

1/C = 9.31 μF/21.6138 μF²

C = 21.6138/9.31 μF

C = 2.32 μF

So, the total charge in the circuit Q = CV where C = total capacitance = 2.32 μF and v = voltage = 15.5 V

So, Q = CV

Q = 2.32 μF × 15.5 V

Q = 35.96 μC

i. The charge on the 4.89 μF capacitor

Since the 4.89 μF is in series with C', the total charge flowing i the circuit is the total charge in the 4.89 μF capacitor. So, its charge Q = 35.96 μC

b. The charge in the 1.47 μF and 2.95 μF capacitors.

To find the charge in the 4.89 μF and 2.95 μF capacitors, we need to find the voltage across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor. The voltage, V' across the 4.89 μF capacitor, since Q = CV', V' = Q/C = 35.96 μC/4.89 μF = 7.35 V

So, the voltage V" across the combined parallel combination of a 1.47 μF capacitor and a 2.95 μF capacitor, C' is V" = 15.5 V - V' (since V' + V" = 15.5 V).

So, V" = 15.5 V - V'

V" = 15.5 V - 7.35 V

V" = 8.15 V

i. The charge on the 1.47 μF capacitor

Using Q' = CV" where Q' = charge across capacitor, C = 1.47 μF and V" = 8.15 V.

So, Q' = CV"

Q' = 1.47 μF × 8.15 V

Q' = 11.98 μC

ii. The charge on the 2.95 μF capacitor

Using Q" = CV" where Q' = charge across capacitor, C = 2.95 μF and V" = 8.15 V.

So, Q" = CV"

Q" = 2.95 μF × 8.15 V

Q" = 24.04 μC

Answer:

2. 8.62×10² Nm

3. 2.30×10² Nm

4. 6.32×10² Nm

Explanation:

2. Determination of the work done by the applied force.

Force (F) = 225 N

Distance (d) = 5 m

Angle (θ) = 40°

Workdone (Wd) =?

Wd = Fd × Cos θ

Wd = 225 × 5 × Cos 40

Wd = 8.62×10² Nm

3. Determination of the work done by the frictional force.

Frictional Force (Fբ) = 60 N

Distance (d) = 5 m

Angle (θ) = 40°

Workdone (Wd) =?

Wd = Fբd × Cos θ

Wd = 60 × 5 × Cos 40

Wd = 2.30×10² Nm

4. Determination of the net work done.

We'll begin by calculating the net force acting on the crate

Force applied (F) = 225 N

Frictional Force (Fբ) = 60 N

Net force (Fₙ) =?

Fₙ = F – Fբ

Fₙ = 225 – 60

Fₙ = 165 N

Finally, we shall determine the net Workdone. This can be obtained as follow:

Net force (Fₙ) = 165 N

Distance (d) = 5 m

Angle (θ) = 40°

Workdone (Wd) =?

Wd = Fₙd × Cos θ

Wd = 165 × 5 × Cos 40

Wd = 6.32×10² Nm

Answer:

the emf of the cell can be determined by measuring the voltage across the cell using a voltmeter and the current in the circuit using an ammeter for various resistances.

Answer:

5.66 m

Explanation:

From online sources, the speed in item 3 being referred to was discovered to be 7.62 m/s

Now, let's get the time of flight from one of Newton's equation of motion;

S = ut + ½gt²

Considering the vertical component, we have u = 0 m/s.

Thus;.

S = ½gt²

Plugging in the relevant values;

2.7 = ½ × 9.8 × t²

t² = 2.7/4.9

t = √(2.7/4.9)

t = 0.7423 s

Now, when we consider the horizontal component of the motion, we have;

S = vt

Where;

S is the distance the fish will travel horizontally before hitting the water.

v = 7.62 m/s

t = 0.7423

Thus

s = 7.62 × 0.7423

s ≈ 5.66 m

Answer:

Work = F X D

Explanation:

Work (J) equals Force (N) multiplied by Distance (M)

[tex]\boxed{\large{\bold{\textbf{\textsf{{\color{blue}{Answer}}}}}}:)}[/tex]

[tex]\sf{\qquad{\qquad{\underline{\underline{ Projectile~motion }}}}}[/tex]

If an object is given an initial velocity in any direction and then allowed to travel freely under gravity only, it is called a projectile motion.

It is basically 3 types

The path followed by a projectile is called its trajectory.

Projectile motion is when an object moves in a bilaterally symmetrical, parabolic path.

The path that the object follows is called its trajectory.

Projectile motion only occurs when there is one force applied at the beginning, after which the only influence on the trajectory is that of gravity

Answer:

pluto

Explanation:

Dwarf because it is very minut

Answer:

I think Saturn.

Explanation:

I think the inner planets are Mercury, Venus, Earth and Mars whereas the outer ones are Jupiter, Saturn, Uranus and Neptune.

Answer:

55

Explanation:95-40=55

i hope i did the math right if i didnt please tell me

Answer:

[tex] \implies U = \dfrac{kq}{r} [/tex]

[tex]\implies U = \dfrac{9 \times {10}^{9} \times 1}{1} [/tex]

[tex]\implies U = 9 \times {10}^{9} \: J[/tex]

We have that absolute potential difference ,due of point charge of 1C at a distance of 1 m is given by

[tex]\rho=9x10 ^{10}J[/tex]

From the question we are told that

point charge of 1C at a distance of 1 m

Generally the equation for the Electrostatic potential energy  is mathematically given as

[tex]\rho=\frac{kq_1q_2}{r}[/tex]

Where k is a constant

[tex]k=9*10^9Nm^2/c^2[/tex]

Therefore

[tex]\rho=\frac{(9*10^9)1*10^(-6)*1*10^{-6}}{1}[/tex]

[tex]\rho=9x10 ^{10}J[/tex]

For more information on this visit

https://brainly.com/question/12319416?referrer=searchResults

For saving lives  the most important safety feature on a car is B. Safety Belt

Safety features of  a car is a feature of a product designed to ensure or increase safety.

Air bag and Anti-lock brakes are the supplemental protection and designed to work best with combination with seat bells.

Air bag reduce the chance that upper body or head will strike the vehicle's interior during a crash alongside with belt that will  also hold your upper body

so, the primary safety feature is seat belt and Air bag and Anti-lock brakes  comes in secondary safety feature  as they increases the safety and risk of getting an injury during any accident

correct answer is B. Safety Belt

learn more about Safety features

https://brainly.com/question/25820562?referrer=searchResults

#SPJ3

Answer:

80 °C

Explanation:

The heat transfer parameters for the water and copper container are;

Mass of the copper container, m₁ = 84 g

Mass of the water in the container, m₂ = 84 g

Initial temperature of the water in the container, T₂ = 20°C

Mass of the hot water added, m₃ = 46 g

Initial temperature of the hot water, T₃ = 200°C

Specific heat capacity of water, c₂ = 4,200 J·kg⁻¹·°C⁻¹

Specific heat capacity of copper, c₁ = 400 J·kg⁻¹·C⁻¹

The formula for the specific heat, ΔQ = m·c·ΔT

The heat lost by the hot water = The heat gained by the container the and the cold water

The formula for the specific heat of the mixture is presented as follows;

m₃ × c₃ × (T₃ - T)  = m₁ × c₁ × (T - T₁) + m₂ × c₂ × (T - T₂)

Where T represents the final temperature of the water

Therefore, by plugging in the values, we get;

46 × 4200 × (200 - T) = 84 × 400 × (T - 20) + 84 × 4200 × (T - 20)

38640000 - 193200·T = 386400·T - 7728000

38640000 + 7728000 = 46368000 = 386400·T + 193200·T = 579,600·T

∴ T = 46368000/579,600 = 80

The final temperature of the water, T = 80°C

Explanation:

Measurement is defined as the act of measuring or the size of something. An example of measurement means the use of a ruler to determine the length of a piece of paper. An example of measurement is 15" by 25". ... The dimension, quantity, or capacity determined by measuring.

Measurement refers to the comparison of unknown physical quantity with a known quantity.

for eg. measurement of body while sewing clothes.......

Answer:

Explanation:

hi