Titan, the largest satellite of Saturn, has a thick nitrogen atmosphere. At its surface, the pressure is 1.5 Earth-atmospheres and the temperature is 94 K.
A) What is the surface temperature in ?
B) Calculate the surface density in Titan's atmosphere in molecules per cubic meter.
C) Calculate the density of Earth's atmosphere at 22 .

A customer can choose one of six speaker systems, one of five DVD players, and one of six flat-screen televisions to design a home entertainment system:

In order to determine the number of possible system configurations

A customer is a person or business that buys items or offerings from another business. clients are vital due to the fact they generate sales. without them, organizations might go out of business.

A client is commonly defined as someone who buys a terrific, product, or carrier. more, in particular, clients are human beings or agencies currently shopping, have bought, or maybe inquisitive about buying services or products from every other character or enterprise.

Learn more about customer here:

https://brainly.com/question/26313265

#SPJ4

The reactive power of the branch (Qb) can be calculated from its voltage and current 676.16 VA.

Reactive power is the power in an AC circuit that is required to establish and maintain a voltage across a load. It is associated with the storage and release of energy in the form of electric and magnetic fields. Reactive power does not contribute to the actual work output of a system and is measured in Volt-amperes reactive (VARs). Power factor is a measure of reactive power relative to the total power in a system.

Source frequency = 60 Hz
Generator impedance = 0 W
Circuit:
Vg = 170 V
R1 = 10 Ω
R2 = 20 Ω
Zb = 20 + j10 Ω

The current flowing through the generator (Ig) and the branch (Ib) can be calculated from Ohm's Law:
Ig = Vg/R1 + Vg/R2 = 170/10 + 170/20 = 17 A
Ib = Ig - Vg/Zb = 17 - 170/(20 + j10) = 17 - 16.4 + j4.4 = 0.6 + j4.4 A
Since Ib is a complex number, we can find its magnitude (|Ib|) and angle (θ):
|Ib| = √(0.6² + 4.4²) = 4.46 A
θ = tan⁻¹(4.4/0.6) = 80.16°
The voltage across the branch (Vb-n) can be calculated using Ohm's Law:
Vb-n = Ib × Zb = (0.6 + j4.4) × (20 + j10) = -8.4 + j74.4 V
The apparent power of the branch (Sb) can be calculated from its voltage and current:
Sb = Vb-n × Ib* = (-8.4 + j74.4) × (0.6 - j4.4) = -45.48 + j367.04 VA
The real power of the branch (Pb) can be calculated from its voltage and current:
Pb = Vb-n × Ib = (-8.4 + j74.4) × (0.6 + j4.4) = -45.48 - j367.04 W
The reactive power of the branch (Qb) can be calculated from its voltage and current:
Qb = Vb-n × Ib* = (-8.4 + j74.4) × (0.6 - j4.4) = 676.16 VA

To learn more about reactive power
https://brainly.com/question/23230296
#SPJ4

Answer:

15 rad/s

Explanation:

Given:

α = 2 rad/s²

ω₀ = 5 rad/s

t = 5 s

Find: ω

ω = αt + ω₀

ω = (2 rad/s²) (5 s) + (5 rad/s)

ω = 15 rad/s

By monitoring a sample's activity as it decays, Ba-137m can be calculated. Utilizing AktivLab, the radioisotope Ba-137half-life, m's which was isolated from Cs-137, is found.

After that, the half-life is calculated using the basic concept of activity, which is the sum of the radionuclide decay constant,, and the number of radioactive atoms present, N. By using the formula = ln2/T1/2, one may solve for and obtain the half-life.

A half-life is the duration needed for something to reduce in quantity by half. The phrase is most frequently used in reference to radioactive decay, which takes place when unstable atomic particles shed energy. There are 29 elements that can travel through this, according to known facts.

Learn more about redox reaction here:

https://brainly.com/question/13293425

#SPJ4

Faraday's left hand rule gives us the direction of the force on the particles, then [tex]F^{\prime}=B q v\\[/tex] gives the size of the force.

What is direction?

Direction is characterized as the course that anything follows, the route that must be taken to go to a particular location, the direction in which something is beginning to take shape, or the direction you are facing. When you turn right instead of left, that is an illustration of direction.

If we use Faraday's left hand rule on each particle, we can determine the effect of the magnetic field on the particle. The diagram shows the direction of the fields and the "current" so we can apply the rule.

For the electron, the magnetic field will exert a force directed into the plane of the paper (or if travelling on the earth, this will be towards the earth).

For the proton, the magnetic field will exert a force out of the paper (or if travelling on the earth, this will be away from the earth).

The force on a particle of charge q moving in a magnetic field, B with a velocity v  is given by:

[tex]F=B q v[/tex]

Both proton and electron have a charge of [tex]1.6 \times 10^{-19} C\\[/tex]

For the electron

[tex]$$F=\left(190 \times 10^{-3}\right) \cdot\left(1.6 \times 10^{-19}\right) \cdot 575000=1.748 \times 10^{-14} N$$[/tex]

For the proton

[tex]$$F=\left(54.2 \times 10^{-6}\right) \cdot\left(1.6 \times 10^{-19}\right) \cdot 130000=1.127 \times 10^{-18} N$$[/tex]

To learn more about direction visit

https://brainly.com/question/17026169

#SPJ4

6000 rulings are present on a 20.0 mm broad diffraction grating. The maximum value of theta at which maxima show on a distant viewing screen for light with a wavelength of 589 nm is 62.1 °, followed by 45.0 ° and 32.0 °.

Adjacent rulings are separated by a distance of d = 20.0mm/6000 = 0.00333mm = 3.33m. Let dsin equal m (0, 1, 2,...). The greatest value of corresponds to m=5, which results in = sin 1(m/d)= sin 1 (5(0.589m)/3.33m)=62.1 ° b) because m/d>1 for m6. The second-largest value of is equal to m=4, which results in the expression = sin 1 (m/d) = sin 1 (4(0.589 m)/ 3.33 m)= 45.0° c. When m=3—the third-largest value of —is used, the result is = sin 1 (m/d) = sin 1 (3(0.589 m)/3.33 m) = 32.0°.

Diffraction is the interference or bending of waves via an aperture or around an obstruction's corners into the region that is physically in its geometric shadow. In essence, the diffracting component or aperture becomes a second source of the wave. Francesco Maria Grimaldi, an Italian physicist, was the first to precisely record the occurrences of the phenomena in 1660 and also coined the name "diffraction".

An unlimited number of locations (three shown) along length d that project phase contributions from the wavefront cause a continuously varying intensity () to be created on the license plate.

The diffraction phenomenon is explained by the classical physics idea known as the Huygens-Fresnel principle, which views each point in a propagating wave front as a group of distinct spherical wavelets.

Learn more about diffraction here:

https://brainly.com/question/12290582

#SPJ4

If you are in a car with a helium balloon in the middle of the back seat and you turn left, the balloon moves towards right.

A change in the air's surrounding density causes a helium-filled balloon to move.

The balloon operates in opposition to what your body would normally do. Therefore, if the automobile stops, the balloon will move to the back. The secret is that you are composed of materials that are significantly heavier than air and that the balloon is loaded with helium (He).

Turn left, the balloon goes right. When you turn right, the balloon moves to the left; when you stop, it moves to the right.

It has to do with the motion of the air in your car. When you start moving forward while stationary, all of the air in the car rushes to the back, where it builds up an area of higher air pressure.

To know more about helium balloon:

https://brainly.com/question/14733676

#SPJ4

Option E; The pump work, the power output of this plant is 335KW

Pressure. at turbine. inlet P1 = 10 Mpa.

Enthalpy at turbine inlet = h1=3625.84 KJ/kg.

Entropy at turbine inlet S1 =6.90 KJ/kg-K.

It is given that process performed acceording to ideal rankine cycle which is "Reversible adiabatic expansion' in case of turbine wor., Since it is reversible adiabatic expansion, entropy at turbine inlet and entropy at turbine outlet is constant. So quality at turbine outlet is evaluated by using this relation. S1 = S2.

Pressure at turbine outlet = 10 Kpa.

Enthalphy of steam = hg =2675.1 KJ/kg.

Enthaphy of liquid=hf =417.51 KJ/kg

Entropy of steam = Sg =7.3589 KJ/kg-K.

Entropy of liquid =Sf =1.302 KJ/kg-K.

We know S1 = S2 =6.090=1.302+x(7.3589 - 1.302).

Quality at turbine exit x =0.79.

Enthalphy at exit = h2 = 417.51+ 0.79*(2675.1 - 417.51) =2201 KJ/kg-K.

heat transfered= mass*(enthlphy at exit of condenser - enthalphy at turbine inlet), Since pump work negleted

At exit of condenser, steam gets converted into water at 10 Kpa pressure whose enthalphy is hf =417.51 KJ/kg.

800 = m(3625.84 - 417.51).

mass flow rate of steam = 0.24 Kg/sec.

Turbine work the power output of this plant is = m(h1 - h2) =0.24(3625.84 - 2201) = 335 KW.

Learn more about power here:

https://brainly.com/question/20335923

#SPJ4

The general vertical displacement equation for object moving upwards is written as h =  v₀t - ¹/₂gt².

The vertical displacement of an object is the height travelled by the object.

The general kinematic equations of motion for vertical displacement is written as follows;

y = y₀ + v₀t + ¹/₂at²

where;

If the object is moving upwards, the new kinematic equation becomes;

h = 0 + v₀t - ¹/₂gt²

h =  v₀t - ¹/₂gt²

where;

For the simplified equation above, the acceleration of the object changes to acceleration due to gravity since the object is moving against gravity in the negative direction.

Thus, the general kinematic equations of motion for vertical displacement is written in terms of acceleration due to gravity in negative direction since it is moving upwards.

Learn more about vertical displacement here: https://brainly.com/question/13411664

#SPJ1

Sand dunes form when  the mound grows in circumference and height due to subsequent sand build up in one place by wind.

A sand dune is a mass of loose sand grains that have accumulated due to wind movement. The mound will eventually get so massive that it will collapse under its own weight to form a sand dune as it increases in height and circumference as a result of additional sand deposits. A set of sand dunes is referred to as a sand dune complex or sand dune system by geologists.

On the other hand, depending on the quantity of vegetation present, vast clusters of sand dunes are referred to as sand seas or sand dune fields. Ergs are another name for sand seas.

Learn more about sand dunes here:

https://brainly.com/question/2456718

#SPJ1

Your question is incomplete, but most probably the question was:

sand dunes form when _______ sand build up in one place  by wind.

Correct. When new user profiles are created, the default profile is utilised. Umama wants to configure Group Policy settings to enable User Experience Virtualization (UE-V).

You can enable or disable User Experience Virtualization using this Group Policy setting (UE-V). Only versions of UE-V 2.x and earlier are affected by this setting. Use the Enable UE-V setting in Wind ows 10, version 1607, for UE-V. The location of the settings template catalogue and the location of the settings storage location are two crucial settings that she must set up.

A programme called Micro soft UE-V (User Experience Virtualization) enables users to switch between Wind ows devices while keeping their current operating system (OS) and application settings.

Learn more about OS here:

brainly.com/question/6689423

#SPJ1

When a white dwarf acquires enough mass for its carbon interior to start fusing, a white dwarf supernova results.

The white dwarf entirely explodes as the star's fusion starts nearly immediately throughout the entire star. When iron is produced during fusion in a star's core, a "massive stellar supernova" results. If a white dwarf in a near binary system acquires enough mass to surpass the "white dwarf limit (1.4 solar masses)," it will erupt as a supernova. The absence of hydrogen characteristics in type I supernovae's spectra at maximum luminosity is a crucial identifying trait. The remnant core of a low-mass star known as a white dwarf is protected from the force of gravity by electron degeneracy pressure. The mass of the Sun is often condensed into a body no bigger than Earth in a white dwarf.

to know more about white dwarf please visit.

https://brainly.com/question/25872293

#SPJ4

There is a net flux going into the surface, the parallelepiped must have a net charge (negative charge). Additionally, without an external field, all lines would point at the slab.

Six parallelograms come together to form a three-dimensional shape called a parallelepiped (the term rhomboid is also sometimes used with this meaning). It is comparable to a parallelogram in the same way that a cube is comparable to a square. There are three similar descriptions of a parallelepiped. A prism with a parallelogram-shaped base, a hexahedron with three pairs of parallel faces, and a polyhedron with six faces, each of which is a parallelogram.

There are pairs of parallel and congruent faces. The parallelepiped has twelve (12) edges and eight (8) vertices. The edges of the parallelepiped can be split into three (3) sets of four (4) edges each, where the edges in each set are all parallel and the same length. The parallelepiped is also a zonohedron.

A parallelepiped is a three-dimensional object having six faces and a parallelogram-like design. It has 8 vertices, 6 faces, and 12 edges. The parallelepiped is also known by the names rhombic, cuboid, and cube.

To know more about parallelepiped

https://brainly.com/question/29835281

#SPJ4

A 10 cm radius Styrofoam sphere is submerged in water. So is a 10 cm radius lead sphere. The buoyant force exerted by the water on the Styrofoam sphere is greater than the force exerted on the lead sphere is true.

2.Hot air balloons could be improved by filling them with hydrogen instead of heated air is ta true statement.

Case I- Styrofoam sphere

The buoyant force exerted by a fluid on an object is equal to the weight of the fluid that the object displaces. This means that the buoyant force exerted on the Styrofoam sphere and the lead sphere will be determined by the amount of water that each sphere displaces when it is submerged.

The Styrofoam sphere has a lower density than water, so it will displace a greater volume of water than the lead sphere, which has a higher density than water. This means that the buoyant force exerted on the Styrofoam sphere will be greater than the force exerted on the lead sphere.

To calculate the buoyant force on each sphere, you can use the following formula:

Buoyant force = weight of displaced fluid

The weight of the displaced fluid is equal to the volume of the fluid displaced multiplied by the fluid's density. You can use the formula for the volume of a sphere (V = 4/3πr^³) to calculate the volume of water displaced by each sphere.

For example, if the density of water is 1 g/cm^³ and the radius of each sphere is 10 cm, the volume of water displaced by the Styrofoam sphere would be:

4/3π(10 cm)^³

= 4/3π1000 cm^³

= 4347.19 cm^³

The weight of the displaced water would be:

4347.19 cm^³ * 1 g/cm^³

= 4347.19 g.

The buoyant force on the Styrofoam sphere would therefore be 4347.19 g.

The volume of water displaced by the lead sphere would be the same as the Styrofoam sphere (4347.19 cm^3), but the weight of the displaced water would be greater, due to the higher density of lead.

The weight of the displaced water for the lead sphere would be:

4347.19 cm^³  * 11.34 g/cm^³

= 49359.93 g,

The buoyant force on the lead sphere would be:

49359.93 g.

Therefore, the buoyant force on the Styrofoam sphere would be less than the force on the lead sphere, as stated in the original statement.

Case 2-Hot air balloons

Hydrogen is a lighter-than-air gas, which means that it is less dense than air and has a lower molecular weight. This makes it a potential alternative to heated air as a lifting gas for hot air balloons.

One advantage of using hydrogen as a lifting gas is that it is more buoyant than air, so a hot air balloon filled with hydrogen would be able to lift a greater payload than a balloon filled with air. This could make it possible to design hot air balloons that are larger or carry more passengers or cargo.

However, there are also some significant drawbacks to using hydrogen as a lifting gas for hot air balloons. One concern is the flammability of hydrogen, which is highly explosive and can ignite easily. This makes it potentially dangerous to use in a hot air balloon, as any leaks or accidents could result in a fire or explosion.

Overall, while hydrogen has some potential advantages as a lifting gas for hot air balloons, the risks and costs associated with its use may make it less practical than other options.

Learn more about Styrofoam sphere from

https://brainly.com/question/28199785
#SPJ1

Transmission coefficients are used in physics and electrical engineering when considering wave propagation in discontinuous media. The snells law is n₁sinθ1 = n₂sinθ2

The transmission coefficient describes the amplitude intensity or total power of the transmitted wave relative to the incident wave. The transmission coefficient is defined as the ratio of the transmitted particle flux to the incident particle flux and depends on the incident energy.

The sum of the reflected and transmitted energy must equal the total incident energy, so the transmission coefficient is calculated simply by subtracting the reflection coefficient. The ratio of the reflected wave amplitude to the incident wave amplitude is called the reflection coefficient.

Learn more about The transmission coefficients here:- https://brainly.com/question/9323897

#SPJ4

The gravitational torque about the pivot when the mass is 60 ∘∘ above the +x-axis is (0.1838 Nm)k

Torque is the turning effect of a force which causes rotation. It is given by τ = F × d where

Since a 50 g mass rotates in a vertical plane--call it the xy-plane with the y-axis pointing up--at the end of a 75-cm-long, massless, rigid rod.

The gravitational torque is given by τ = F × d where

So, τ = F × d

= -(mgcosФ)j × di

= mgdcosФ(-j × i)

= -mgdcosФ(j × i)

= -mgdcosФ(-k)

= (mgdcosФ)k

Given that

Substituting the values of the variables into the equation, we have

τ = (mgdcosФ)k

= (0.05 kg × 9.8 m/s² × 0.75 m × cos60°)k

= (0.05 kg × 9.8 m/s² × 0.75 m × cos60°)k

= (0.3675 kgm²/s² × 0.5)k

= (0.18375 kgm²/s²)k

= (0.18375 Nm)k

≅ (0.1838 Nm)k

So, the torque is (0.1838 Nm)k

Learn more about torque here:

https://brainly.com/question/28219986

#SPJ1

Laboratory experiments on Earth have examined that each element in the periodic table emits photons only at definite wavelengths (determined by the excitation state of the atoms).

These photons are manifest as either emission or absorption lines in the spectrum of an astronomical object, and by observing the position of these spectral lines, we can detect which components are present in the object itself or along the line of sight.

although, when astronomers observe spectral lines in extragalactic objects (such as galaxies and quasars), they find that the wavelength of the notice spectral lines is different from the laboratory experiments.

In most cases, the wavelength of the spectral lines is longer and thus are shifted toward the red end of the spectrum they are redshifted.

There are many explanations for this redshift phenomenon.

To know more about redshifts:

https://brainly.com/question/13494718

#SPJ4

The final velocity of the weights will be 3.31 m/s

Weight = 5 lb

Coefficient of kinetic friction (µ) = 0.18

let T be tension

[tex]m_{1}[/tex]*g-T =[tex]m_{1}[/tex]*a

[tex]m_{1}[/tex] =10 lb = 4.53 kg

T-(µ)[tex]m_{2}[/tex]g =[tex]m_{2}[/tex]a

Adding both equations, we have

([tex]m_{1}[/tex]-k[tex]m_{2}[/tex])g =[tex]m_{2}[/tex] a

a = (4.53-0.2*2.26)*10/2.26 =18.04 [tex]m/s^{2}[/tex]

Using the equation of motion, we have,

[tex]v^{2} -u^{2} =2as[/tex]

Since the body starts from rest, the initial velocity, that is, u is zero.

So, u = 0 m/s

Putting this value in the above equation to calculate the final velocity, we have,

[tex]v^{2}[/tex] = 2as

v = [tex]\sqrt{(2*18.04*0.304) }[/tex]= 3.31 m/s

Thus, the final velocity of the weights will be 3.31 m/s

To read more about velocity, visit https://brainly.com/question/18084516

#SPJ4

Due to an automobile accident, Jenny suffered damage to her cerebral cortex in Broca's area. Jenny is most likely to experience: aphasia.

Aphasia is the inability to understand or form language due to damage to certain areas of the brain The main causes are stroke and head trauma. Although the prevalence is difficult to determine, aphasia due to stroke is estimated at 0.1-0.4% in the Global North. Aphasia can also be the result of a brain tumor, brain infection, or neurodegenerative disease (such as dementia).

To be diagnosed with aphasia, communication after an acquired brain injury Speech or language must be significantly impaired in one (or more) of the four aspects of Alternatively, in the case of progressive aphasia, it must have decreased significantly over a short period of time. The four dimensions of communication are auditory comprehension, verbal expression, reading and writing, and functional communication.

Learn more about Aphasia here : https://brainly.com/question/4045064

#SPJ4

Projectile launch is a kinematics application to the movement of objects near the earth's surface.

Since the acceleration is constant, the time it takes for the body to go up is equal to the time it takes to go down; thus, the time it takes to go up is half of the total time.

tu = ttotal/2

tu = 4.70 / 2

tu = 2.35 s

The height the ball reach

The point of maximum height where the vertical velocity is zero

vy = voy - gt

0 = voy - gt

voy = gt

= 9.8 x 2.35

= 23 m / s

By using the equation.

v²y = v²oy - 2gy

0 = v²oy - 2gy

y = v²oy/2g

y = 23²/2 x 9.8

y = 27 m

To find the initial velocity,

Initial vertical velocity = 23 m / s

vx = x/t

The throw range is 44m in time of 4.60 s

vₓ = 44 / 4.60

 v₀ =  [tex]\sqrt{v^{2}ox + v^{2}oy }[/tex]

 v₀ = [tex]\sqrt{9.56^{2}+23^{2} }[/tex]

 v₀ = 24.9 m / s

The launch angle is:

Let's use trigonometry

tan θ = voy/vox

θ = tan⁻¹ voy/vox

θ = tan⁻¹ 23/9.56  

θ = 67.4°

To learn more about Projectile launch refer to :

https://brainly.com/question/24216590

#SPJ1

1. The velocity of the center of mass of the two-block system is zero.

2. The magnitude of the acceleration of the left block is greater than that of the right block.

The center of mass, or balancing point, of a distribution of mass in space is the only location where the total of the weighted relative positions of the distributed mass equals zero. In order to accelerate linearly without also accelerating angularly, a force might be applied at this moment. Using the center of mass as a reference point simplifies calculations in mechanics quite a bit. To imagine how an object would move, one can imagine a hypothetical location where the object's total mass is concentrated. To apply Newton's equations of motion to a particular object, the center of mass is the particle equivalent of that thing.

Learn more about center of mass here:

https://brainly.com/question/27549055

#SPJ4

Mathematically, F is1.56 represents the resulting force of friction on the block. The Frictioval force's mathematical equation is typically represented as F is uN.

Explanation:

Mathematically, F=1.56 represents the resulting force of friction on the block.

The Frictioval force's mathematical equation is typically represented as F=uN.

u equals the friction coefficient.

N is normal force.

frictional force

As a result, the force of friction on the F=10.4*0.15 F=1.56

To learn more about Force of friction refer to:

https://brainly.com/question/24386803

#SPJ1

When a massless item is fastened to an ideal spring with a force constant of 130 n/m, it is discovered that it vibrates at a frequency of 7.25 hz. The motion lasts 0.138 seconds.

In accordance with Hooke's law, the force necessary to compress or enlarge a spring is directionally related to or proportionate to the length it is stretched to. K is used to indicate the force constant.

The rate of vibrations and oscillations is called frequency, and it is expressed in hertz (Hz) units. To distinguish and ascertain vibrational patterns, frequencies are used. Therefore, a faster-vibrating atom would be seen as having a greater frequency than a slower-vibrating one.

T= 1/f = 1/7.25 Hz = 0.138s

To learn more about frequency visit:

brainly.com/question/14727355

#SPJ4

The given question is incomplete. The complete question is:

When an object of unknown mass is attached to an ideal spring with force constant 130 n/m, it is found to vibrate with a frequency of 7.25 hz. What is the period of the motion?

The general instinct hypothesis, which contends that people are physiologically predisposed to or possess inclinations for violent behaviours, is known as the instinct theory of aggression in psychology.

In an effort to understand why we become aggressive and whether that behaviours can be altered, psychologists have developed three primary theories of aggression. Although many hypotheses have been put out, these three have proven most reliable and are crucial to comprehending the origins of violence. These hypotheses comprise as,

To know more about theory of aggression

https://brainly.com/question/3197702

#SPJ4

The crane is under 5120 N of force. The crane touches the rock boulder and uses mechanical force to lift it.

Force is a physical phenomenon that can change an object's shape as well as its state of motion or rest. The SI unit of force is the Newton.

Jib, gantry, and overhead cranes are the three pieces of machinery used most frequently in the industry. Depending on the type of item to be moved, either a chain or wire rope hoist will be used. In the shipbuilding sector, material handling is the main use of overhead cranes during the assembly process.

Briefing:

Mass (m) = 400kg

Acceleration (a) = 3.00 m/s^2

Gravitational acceleration (g) = 9.81 m/s^2

Force (F) = mg + ma

Force (F) = m (g + a)

Force (F) = 400 (9.81+3)

Force (F) = 5120 N

To know more about force click:

brainly.com/question/28692142

#SPJ1

A 95% confidence interval for μA-μB is 0.025

If we want to make a 95% confidence interval estimate for an unknown population mean. This means that there is a 95% probability that the confidence interval will have the true population mean.

Thus, P( [sample mean] - margin of error < μ < [sample mean] + margin of error) = 0.95.

We have,

n1 = 12

s1 = 5000

mean x1 = 36300

n2= 12

s2 =6100

mean x2 =38100

We have to find 95%confidence interval for μA- μB

from 95% = 100 (1-α%)

     1-α = 0.95

    α = 1-0.95 =0.05

α/2 = 0.025

To know more about mean here

brainly.com/question/14882017

#SPJ4

A inaccessible object is a dynamic variable on the free store without any pointer pointing to it.

Utilize the sextant's arc to determine the angle. By dividing the object's distance from the point of observation by the tan of the angle you calculated, you may use a scientific calculator to get the object's height.

The measuring of heights and distances that are unreachable is made easier by right-triangle trigonometry. By drawing a right triangle with the unknown height or distance as one of its sides and a known side and angle on the other, it is possible to determine the unknown height or distance.

To know more about inaccessible object visit:

https://brainly.com/question/21989844

#SPJ4

Answer:

dynamic variable

The voltage drops in terms of vb , i2 , i3 , the given resistances, and any other given quantities.ΣΔV = 0 = I3 ⋅ R3 - I2 ⋅ R2.

When applying Kirchhoff's second rule the loop rule we need to identify closed loops and decide whether to loop clockwise or counterclockwise. For example, in Figure 3 the loop was traversed in the same direction as the current.

Loop 1 is the full loop and Loop 2 is the small loop on the right. To apply the loop rule, add all those voltage changes. Kirchhoff's Second Law, also known as Kirchhoff's Voltage Law states that the sum of all voltages around the closed loop of any circuit must be zero. This is a result of charge conservation and energy conservation.

Learn more about The loop rule here:- https://brainly.com/question/15705903

#SPJ4

The increase in mass of the space station has no effect on the field strength, and the increase in orbital radium decreases the field strength

What is Earth's Gravitation Field?

Earth's gravitation field is the force any object experiences due to the gravitational pull by earth. It's formula is given below where G is the force, m is the mass of earth and r is radius of distance.

As seen through the formula, the gravitation field strength is only depend on earth's mass which is constant and radius of the distance. Hence, the increase in mass of the space station has no effect on the field strength, and the increase in orbital radium decreases the field strength.

To learn more about gravitation from the given link

https://brainly.com/question/3009841

#SPJ1

The final velocity of the two balls after collision is 1.7 m/s and the direction is 45⁰.

The given parameters;

   mass of the first clay ball, m₁ = 20 g = 0.02 kg

   initial velocity of the first clay ball, u₁ = 3 m/s

   mass of the second clay ball, m₂ = 30 g = 0.03 kg

   initial velocity of the second ball, u₂ = 2 m/s

The initial momentum of the fist ball is calculated as follows;

                               P₁ = m₁u₁

                                  P₁ = (0.02)(3)

                                 P₁ = 0.06 kg.m/s

The initial momentum of the second ball is calculated as follows

                                      P₂ = m₂u₂

                                        P₂ = (0.03)(2)

                                         P₂ = 0.06 kg.m/s

The resultant initial momentum of the two balls is calculated as follows;

Apply the principle of conservation of momentum, to determine the final velocity of the two balls;

The direction of the two ball's velocity is calculated as follows;

To know more about speed direction visit:

https://brainly.com/question/13776007

#SPJ1