Two imaginary spherical surfaces of radius R and 2R respectively surround a positive point charge Q located at the center of the concentric spheres. When compared to the number of field lines N1 going through the sphere of radius R, the number of electric field lines N2 going through the sphere of radius 2R is

Answers

Answer 1

Answer:

N2 = ¼N1

Explanation:

First of all, let's define the terms;

N1 = number of electric field lines going through the sphere of radius R

N2 = number of electric field lines going through the sphere of radius 2R

Q = the charge enclosed at the centre of concentric spheres

ε_o = a constant known as "permittivity of the free space"

E1 = Electric field in the sphere of radius R.

E2 = Electric field in the sphere of radius 2R.

A1 = Area of sphere of radius R.

A2 = Area of sphere of radius 2R

Now, from Gauss's law, the electric flux through the sphere of radius R is given by;

Φ = Q/ε_o

We also know that;

Φ = EA

Thus;

E1 × A1 = Q/ε_o

E1 = Q/(ε_o × A1)

Where A1 = 4πR²

E1 = Q/(ε_o × 4πR²)

Similarly, for the sphere of radius 2R,we have;

E2 = Q/(ε_o × 4π(2R)²)

Factorizing out to get;

E2 = ¼Q/(ε_o × 4πR²)

Comparing E2 with E1, we arrive at;

E2 = ¼E1

Now, due to the number of lines is proportional to the electric field in the each spheres, we can now write;

N2 = ¼N1


Related Questions

A wave travelling along the positive x-axis side with a
frequency of 8 Hz. Find its period, velocity and the distance covered
along this axis when its wavelength and amplitude are 40 and 15 cm
respectively.​

Answers

Explanation:

The frequency is given to be f = 8 Hz.

Period is the inverse of frequency.

T = 1/f = 0.125 s

Velocity is wavelength times frequency.

v = λf = (0.40 m) (8 Hz) = 3.2 m/s

The wave travels 3.2 meters every second.

The ability of a water strider to move along the surface of water without breaking the surface is due to:

Answers

Answer:

The ability of a water strider to move along the surface of water without breaking the surface is due to:

SURFACE TENSION

Explanation:

this is because Water molecules are more attracted to each other than they are to other materials, so they generate a force to stay together called surface tension. Which allows the strider to move without breaking the surface

An object is inside a room that has a constant temperature of 289 K. Via radiation, the object emits three times as much power as it absorbs from the room. What is the temperature (in kelvins) of the object

Answers

Answer:

T_object = 380.35 K

Explanation:

From Stefan–Boltzmann law, the power output is given by the formula:

P = σAT⁴

where;

σ is Stefan-Boltzmann constant

A is area of the radiating surface.

T is temperature of the body

Now, we are told that the power the object emitted is 3 times the power absorbed from the room.

Thus, we have;

P_e = 3P_a

Where P_e is power emitted and P_a is power absorbed.

So, we have;

σA(T_object)⁴ = 3σA (T_room)⁴

σA will cancel out to give;

(T_object)⁴ = 3(T_room)⁴

We are given T_room = 289 K

Thus;

(T_object)⁴ = 3 × 289⁴

(T_object) = ∜(3 × 289⁴)

T_object = 380.35 K

The two metallic strips that constitute some thermostats must differ in:_______
A. length
B. thickness
C. mass
D. rate at which they conduct heat
E. coefficient of linear expansion

Answers

Answer:

E. Coefficient of linear expansion

Equipotential lines are lines with equal electric potential (for example, all the points with an electric potential of 5.0 V). Using the plot tool that comes with voltmeter (pencil icon) make two equipotential lines at r = 0.5 m and r = 1.5 m. Enable electric field vectors in the simulation. Put an electric field sensor at different points on the equipotential line and note the direction of the electric field vector. What can you conclude about the direction of the electric field vector in relation to the equipotential lines?

The direction for each field vector is perpendicular to equipotential lines.

Take a snapshot of the simulation showing equipotential lines and paste to a word document.

Answers

....................

Suppose you want a telescope that would allow you to see distinguishing features as small as 3.5 km on the Moon some 384,000 km away. Assume an average wavelength of 550 nm for the light received.Required:What is the minimum diameter mirror on a telescope?

Answers

Explanation:

[tex]\theta=1.22 \frac{\lambda}{D}[/tex]

And, from equation ( 2 ), we get

[tex]\theta=\frac{x}{d}[/tex]

Thus,

[tex]\frac{x}{d} &=1.22 \frac{\lambda}{D}[/tex]

[tex]D &=1.22 \frac{\lambda d}{x}[/tex]

[tex]=1.22 \frac{550 \times 10^{-9} 3.84 \times 10^{8}}{5 \times 10^{3}}[/tex]

[tex]=0.0515 \mathrm{m}[/tex]

Thus, the diameter of the telescope's mirror that would allow us to see details as small as is

A cart rolls 2 m to the right then rolls back 1 m to the left.
a. What is the total distance rolled by the cart?

Answers

Explanation:

It is given that,

Distance covered by the cart to the right is 2 m

Distance covered by the cart to the left is 1 m

We need to find the total distance rolled by the cart. Total distance is equal to the sum of the distances covered by an object. It does depend on the direction.

Total distance = 2 m + 1 m

D = 3 m

The cart rolled to a total distance of 3 m.

A car moving at 30 m/s slows uniformly to a speed of 10 m/s in a time of 5 s. Determine 1. The acceleration of the car. 2. The distance it moves in the third second.

Answers

Answer:

Explanation:

Initial velocity , u = 30 m/s

final velocity , v = 10 m/s

time , t = 5 seconds

1. Acceleration = v - u / t

= 10 - 30 / 5

= -20 / 5

= - 4 m/s

A car accelerates uniformly from rest and reaches a speed of 22.7 m/s in 9.02 s. Assume the diameter of a tire is 58.5 cm. (a) Find the number of revolutions the tire makes during this motion, assuming that no slipping occurs. rev (b) What is the final angular speed of a tire in revolutions per second? rev/s

Answers

(a) The car is undergoing an acceleration of

[tex]a=\dfrac{22.7\frac{\rm m}{\rm s}-0}{9.02\,\mathrm s}\approx2.52\dfrac{\rm m}{\mathrm s^2}[/tex]

so that in 9.02 s, it will have covered a distance of

[tex]x=\dfrac a2(9.02\,\mathrm s)^2\approx102\,\mathrm m[/tex]

The car has tires with diameter d = 58.5 cm = 0.585 m, and hence circumference π d ≈ 1.84 m. Divide the distance traveled by the tire circumference to determine how many revolutions it makes:

[tex]\dfrac{102\,\mathrm m}{1.84\,\mathrm m}\approx55.7\,\mathrm{rev}[/tex]

(b) The wheels have average angular velocity

[tex]\omega=\dfrac{\omega_f+\omega_i}2=\dfrac{\theta_f-\theta_i}{\Delta t}[/tex]

where [tex]\omega[/tex] is the average angular velocity, [tex]\omega_i[/tex] and [tex]\omega_f[/tex] are the initial and final angular velocities (rev/s), [tex]\theta_i[/tex] and [tex]\theta_f[/tex] are the initial and final angular displacements (rev), respectively, and [tex]\Delta t[/tex] is the duration of the time between initial and final measurements. The second equality holds because acceleration is constant.

The wheels start at rest, so

[tex]\dfrac{\omega_f}2=\dfrac{55.7\,\rm rev}{9.02\,\rm s}\implies\omega_f\approx12.4\dfrac{\rm rev}{\rm s}[/tex]

The sun generates both mechanical and electromagnetic waves. Which statement about those waves is true?
OA. The mechanical waves reach Earth, while the electromagnetic waves do not.
OB. The electromagnetic waves reach Earth, while the mechanical waves do not.
OC. Both the mechanical waves and the electromagnetic waves reach Earth.
OD. Neither the mechanical waves nor the electromagnetic waves reach Earth.

Answers

Answer: The correct answer for this question is letter (B) The electromagnetic waves reach Earth, while the mechanical waves do not. The sun generates both mechanical and electromagnetic waves. Space, between the sun and the earth is a nearly vacuum. So mechanical wave can not spread out in the vacuum.

Hope this helps!

Answer:

The electromagnetic waves reach Earth, while the mechanical waves do not

Calculate the focal length (in m) of the mirror formed by the shiny bottom of a spoon that has a 3.40 cm radius of curvature. m (b) What is its power in diopters? D

Answers

Answer:

The power of the mirror in diopters is 58.8 D

Explanation:

Given;

radius of curvature of the spoon, R = 3.4 cm = 0.034 m

The focal length of a mirror is given by;

[tex]f = \frac{R}{2} \\\\f = \frac{0.034}{2} \\\\f = 0.017 \ m[/tex]

The focal length of the mirror is 0.017 m

(b) The power of the mirror is given by;

[tex]P = \frac{1}{f}[/tex]

where;

P is the power of the mirror

f is the focal length

[tex]P = \frac{1}{f}\\\\P= \frac{1}{0.017}\\\\P = 58.8 \ D[/tex]

Thus, the power of the mirror in diopters is 58.8 D

Your favorite radio station broadcasts at a frequency of 91.5 MHz with a power of 11.5 kW. How many photons does the antenna of the station emit in each second?

Answers

Answer:

Number of photons emit per second = 1.9 × 10²⁹  (Approx)

Explanation:

Given:

Frequency = 91.5 MHz

Power = 11.5 Kw = 11,500 J/s

Find:

Number of photons emit per second

Computation:

Total energy with frequency (E) = hf

Total energy with frequency (E) = 6.626×10⁻³⁴  × 91.5×10⁶

Total energy with frequency (E) = 6.06×10⁻²⁶ J

Number of photons emit per second = 11,500 / 6.06×10⁻²⁶

Number of photons emit per second = 1897.689 × 10²⁶

Number of photons emit per second = 1.9 × 10²⁹  (Approx)

A group of students conducted several trials of an experiment to study Newton’s second law of motion. They concluded that tripling the mass required tripling the net force applied. What quantity were the students holding constant?

Answers

Answer:

1) Mass and acceleration

2) 4.0

3)When the net force applied to an object changes, the acceleration changes by the same factor.

4)acceleration

5)The acceleration is half of its original value

Explanation:

A wise man once said if you cheat together you succeed together! lol i am jk  

An earthquake emits both S-waves and P-waves which travel at different speeds through the Earth. A P-wave travels at 9 000 m/s and an S-wave travels at 5 000 m/s. If P-waves are received at a seismic station 1.00 minute before an S-wave arrives, how far away is the earthquake center?

Answers

Assuming constant speeds, the P-wave covers a distance d in time t such that

9000 m/s = d/(60 t)

while the S-wave covers the same distance after 1 more minute so that

5000 m/s = d/(60(t + 1))

Now,

d = 540,000 t

d = 300,000(t + 1) = 300,000 t + 300,000

Solve for t in the first equation and substitute it into the second equation, then solve for d :

t = d/540,000

d = 300,000/540,000 d + 300,000

4/9 d = 300,000

d = 675,000

So the earthquake center is 675,000 m away from the seismic station.

Suppose a 500 mb chart valid today at 12 Z indicates a large trough over the eastern US and a large ridge over the western US. An aircraft, flying in the vicinity of 18,000 ft altitude from west to east over the US at 12 Z today, will _____ altitude if the altimeter is not corrected. Group of answer choices

Answers

Answer:

An aircraft, flying in the vicinity of 18,000 ft altitude from west to east over the US at 12 Z today, will __LOSE___ altitude if the altimeter is not corrected

Which examination technique is the visualization of body parts in motion by projecting x-ray images on a luminous fluorescent screen?

Answers

Answer:

Fluoroscopy

Explanation:

A Fluoroscopy is an imaging technique that uses X-rays to obtain real-time moving images of the interior of an object. In its primary application of medical imaging, a fluoroscope allows a physician to see the internal structure and function of a patient, so that the pumping action of the heart or the motion of swallowing, for example, can be watched.

If the distance from your eye's lens to the retina is shorter than for a normal eye, you will struggle to see objects that are

Answers

Answer:

far away

Explanation:

There are different types of eye defect ranging from short sightedness, longsighted, astigmatism, presbyopia etc.

If someone is only able to see close ranged object clearly but not far distant object, then such person is suffering from short sightedness or myopia. This occurs when the light rays entering the eye does not converge on the retina. Instead of converging on the retina, the light ray is formed on a point in front of the retina. This causes the distance from the eye's lens to the retina shorter compared to that of a normal eye. This eye defect is usually corrected using concave lens in order to diverge the rays thereby allowing it to focus on the retina.

Hence, if the distance from your eye's lens to the retina is shorter than for a normal eye, you will struggle to see objects that are far away (at a far distant).

front wheel drive car starts from rest and accelerates to the right. Knowing that the tires do not slip on the road, what is the direction of the friction force the road applies to the rear tire

Answers

Answer:

The frictional force the road applies to the rear tire is static friction and it acts opposite to the direction in which the car is traveling.

Explanation:

This question suggests that the car is accelerating forward. Thus, the easiest way for us to know what friction is doing is for us to know what happens when we turn friction off.

Now, if there is no friction and the car is stopped, if we push down on the accelerator, it will make the front wheels to spin in a clockwise manner. This spin occurs on the frictionless surface with the rear wheels doing nothing while the car doesn't move.

Now, if we apply friction to just the front wheels, the car will accelerate forward while the back wheels would be dragging along the road and not be spinning. Thus, friction opposes the motion and as such, it must act im a direction opposite to where the car is going. This must be static friction.

The frictional force the road applies to the rear tire is static friction and it acts opposite to the direction in which the car is traveling.

UV radiaGon having a wavelength of 120 nm falls on gold metal, to which electrons are bound by 4.82 eV. What is the maximum kineGc energy of the ejected photoelectrons

Answers

Answer:

K.E = 5.53 eV = 8.85 x 10⁻¹⁹ J

Explanation:

First we calculate the energy of photon:

E = hc/λ

where,

E = Energy of Photon = ?

h = Plank's Constant = 6.626 x 10⁻³⁴ J.s

c = speed of light = 3 x 10⁸ m/s

λ = wavelength = 120 nm = 1.2 x 10⁻⁷ m

Therefore,

E = (6.626 x 10⁻³⁴ J.s)(3 x 10⁸ m/s)/(1.2 x 10⁻⁷ m)

E = (16.565 x 10⁻¹⁹ J)(1 eV/1.6 x 10⁻¹⁹ J)

E = 10.35 eV

Now, from Einstein's Photoelectric equation we know that:

Energy of Photon = Work Function + K.E of Electron

10.35 eV = 4.82 eV + K.E

K.E = 10.35 eV - 4.82 eV

K.E = 5.53 eV = 8.85 x 10⁻¹⁹ J

The maximum kinetic energy of the ejected photoelectrons will be "8.85 × 10⁻¹⁹ J".

Kinetic energy

According to the question,

Speed of light, c = 3 × 10⁸ m/s

Wavelength, λ = 120 nm or,

                        = 1.2 × 10⁻⁷ m

Plank's Constant, h = 6.626 × 10⁻³⁴ J.s

Now,

The energy of photon will be:

→ E = [tex]\frac{hc}{\lambda}[/tex]

By substituting the values,

     = [tex]\frac{6.626\times 10^{-34}\times 3\times 20^8}{1.2\times 10^{-7}}[/tex]

     = [tex]\frac{16.565\times 10^{-19}}{\frac{1 \ eV}{1.6\times 10^{-19}} }[/tex]

     = 10.35 eV

By using Einstein's Photoelectric equation,  

Energy of Photon = Work function + K.E

                   10.35 = 4.82 + K.E

                       K.E = 10.35 - 4.82

                             = 5.53 eV or,

                             = 8.85 × 10⁻¹⁹ J

Thus the response above is correct.

Find out more information about Kinetic energy here:

https://brainly.com/question/25959744

You want the current amplitude through a 0.450 mH inductor (part of the circuitry for a radio receiver) to be 1.50 mA when a sinusoidal voltage with an amplitude of 13.0 V is applied across the inductor. What frequency is required?

Answers

Answer:

3.067MHz

Explanation:

The formula for calculating the voltage across an inductor is expressed as

[tex]V_l = IX_l\\\\Since\ X_l = 2\pi fL\\V_l = I(2\pi fL)[/tex]

Given parameters

current amplitude I = 1.50mA = 1.5*10⁻³A

inductance L = 0.450mH = 0.450*10⁻³H

Voltage across the inductor [tex]V_l[/tex] = 13.0V

Required

frequency f

Substituting the given parametres into the formula, we have;

[tex]V_l = I(2\pi fL)\\\\13 = 1.50*10^{-3}(2*3.14*f*0.450*10^{-3})\\\\13 = 4.239*10^{-6}f\\\\f = \frac{13}{4.239*10^{-6}} \\\\f = 3,066,761 Hertz\\\\f = 3.067MHz[/tex]

Hence, the frequency required is 3.067MHz

How many heartbeats in a typical human lifetime? Enter your answer as a number (NOT as a power of ten) and in one significant figure.​

Answers

Answer:

20,000,000,000

Explanation:

As we've seen, humans have on average a heart rate of around 60 to 70 beats per minute, give or take. We live roughly 70 or so years, giving us just over 2 billion beats all up.Apr

A flatbed truck is supported by its four drive wheels, and is moving with an acceleration of 7.4 m/s2. For what value of the coefficient of static friction between the truck bed and a cabinet will the cabinet slip along the bed surface?

Answers

Answer:

The value is  [tex]\mu = 0.76[/tex]

Explanation:

From the question we are told that

    The  acceleration is [tex]a = 7.4 \ m /s^2[/tex]

Generally the force by which the truck bed (truck) is moving with is mathematically represented as

          [tex]F = ma[/tex]

Now for the truck cabinet to slip from the truck bed then the frictional force between the truck cabinet  is equal the force by which the the truck bed is moving with that is  

        [tex]F_f = F[/tex]

Here  [tex]F_f[/tex] is the frictional force which is mathematically represented as

         [tex]F_f = \mu * m * g[/tex]

substituting into above equation

         [tex]\mu * m * g = ma[/tex]

=>        [tex]\mu = \frac{a}{g}[/tex]

substituting values

           [tex]\mu = \frac{ 7.4 }{ 9.8}[/tex]

           [tex]\mu = 0.76[/tex]

         

A transformer consists of a 500-turn primary coil and a 2000-turn secondary coil. If the current in the secondary is 3.0 A, what is the current in the primary

Answers

Answer:

12A

Explanation:

Formula for calculating the relationship between  the electromotive force (emf), current and number of turns of a coil in a transformer is expressed as shown:

[tex]\dfrac{V_s}{V_p} = \dfrac{N_s}{N_p} = \dfrac{I_p}{I_s}[/tex]  where;

Vs and Vp are the emf in the secondary and primary coil respectively

Ns and Np are the number if turns in the secondary and primary coil respectively

Ip and Is are the currents in the secondary and primary coil respectively

Since the are all equal to each other, then we can equate any teo of the expression as shown;

[tex]\dfrac{N_s}{N_p} = \dfrac{I_p}{I_s}[/tex]

Given parameters

Np = 500-turns

Ns = 2000-turns

Is = 3.0Amp

Required

Current in the primary coil (Ip)

Using the relationship [tex]\dfrac{N_s}{N_p} = \dfrac{I_p}{I_s}[/tex]

[tex]I_p = \dfrac{N_sI_s}{N_p}[/tex]

[tex]I_p = \dfrac{2000*3}{500} \\\\I_p = \frac{6000}{500}\\ \\I_p = 12A\\[/tex]

Hence the current in the primary coil is 12Amp

A fixed 11.2-cm-diameter wire coil is perpendicular to a magnetic field 0.53 T pointing up. In 0.10 s , the field is changed to 0.24 T pointing down. What is the average induced emf in the coil?

Answers

Answer:

The average induced emf in the coil is 0.0286 V

Explanation:

Given;

diameter of the wire, d = 11.2 cm = 0.112 m

initial magnetic field, B₁ = 0.53 T

final magnetic field, B₂ = 0.24 T

time of change in magnetic field, t = 0.1 s

The induced emf in the coil is calculated as;

E = A(dB)/dt

where;

A is area of the coil = πr²

r is the radius of the wire coil = 0.112m / 2 = 0.056 m

A = π(0.056)²

A = 0.00985 m²

E = -0.00985(B₂-B₁)/t

E = 0.00985(B₁-B₂)/t

E = 0.00985(0.53 - 0.24)/0.1

E = 0.00985 (0.29)/ 0.1

E = 0.0286 V

Therefore, the average induced emf in the coil is 0.0286 V

We have that for the Question, it can be said that the average induced emf in the coil is

E=0.028565V

From the question we are told

A fixed 11.2-cm-diameter wire coil is perpendicular to a magnetic field 0.53 T pointing up. In 0.10 s , the field is changed to 0.24 T pointing down. What is the average induced emf in the coil?

Generally the equation for the Average emf induced   is mathematically given as

[tex]Emf_a=-NA\frac{dB}{dt}\\\\Where\\\\Area\\\\a=\pir^2\\\\a=\pi(0.056)^2\\\\a=0.00985\\\\[/tex]

Hence

[tex]dB=0.24-0.53\\\\dB=-0.29T[/tex]

Therefore

[tex]E=-\frac{1*0.00985*-0.29 }{0.10}[/tex]

E=0.028565V

For more information on this visit

https://brainly.com/question/23379286

A solenoid with 3,000.0 turns is 70.0 cm long. If its self-inductance is 25.0 mH, what is its radius? (The value of μ0 is 4π x 10-7 N/A2 .) A. 0.02219 m B. 327 m C. 52 m D. 0.00199 m

Answers

Answer:

A. 2.2*10^-2m

Explanation:

Using

Area = length x L/ uo xN²

So A = 0.7m * 25 x 10^-3H /( 4π x10^-7*

3000²)

A = 17.5*10^-3/ 1.13*10^-5

= 15.5*10^-2m²

Area= π r ²

15.5E-2/3.142 = r²

2.2*10^2m

Explanation:

A particle moves along line segments from the origin to the points (2, 0, 0), (2, 3, 1), (0, 3, 1), and back to the origin under the influence of the force field F(x, y, z).

Required:
Find the work done.

Answers

Answer:

the net work is zero

Explanation:

Work is defined by the expression

        W = F. ds

Bold type indicates vectors

In this problem, the friction force does not decrease, therefore it will be zero.

Consequently for work on a closed path it is zero.

The work in going from the initial point (0, 0, 0) to the end of each segment is positive and when it returns from the point of origin the angle is 180º, therefore the work is negative, consequently the net work is zero

A parallel plate air-filled capacitor is being charged.The circular plates have a radius of 4.00cm, and at a particular instant the conduction current in the wiresis 0.280A.


a. What is the displacement current density (jD) in theair space between the plates?

b. What is the rate at which the electric field between the platesis changing?

c. What is the induced magnetic field between the plates at adistance of 2.00 cm from the axis?

d. What is the induced magnetic field between the plates at adistance of 1.00 cm form the axis?

Answers

Answer:

Given that

capacitor being charged by a current i c has a displacementcurrent equal to i c between the plates∴

displacement current iD =i c=0.280 Aradius of the circular plate r = 4 cm=0.04 m

( A ) . displacement current density j D = iD / ( π r 2 )=0.28 / ( 3.14 * 0.04 2 )=55.73 A / m 2

( B ) . displacement current density j

D = ε( dE / dt )the rate at which the electric field between the plates is changing(

dE / dt ) = jD/ εdE/ dt ) = 55.73/ 8.85 * 10 -12=6.3*10 12 N / C - s( C ) . the induced magnetic field between theplates B = ( μ * r / 2π R 2) * i c ----( 1 )whereR= 2 cm=0.02 mr= 4 cm=0.04 mμ=permeability of free space=4π* 10 -7 H( D )substitute R = 1 cm = 0.01 m inequation ( 1 ),wegetanswer

A scientist is carrying out an experiment to determine the index of refraction for a partially reflective material. To do this, he aims a narrow beam of light at a sample of this material, which has a smooth surface. He then varies the angle of incidence. (The incident beam is traveling through air.)
The light that gets reflected by the sample is completely polarized when the angle of incidence is 46.5°.
(a) What index of refraction describes the material?
n =
(b) If some of the incident light (at θi = 46.5°) enters the material and travels below the surface, what is the angle of refraction (in degrees)?

Answers

Answer:

a) 1.05

b) 43.6°

Explanation:

a) The index refraction that describes the material can be found using Brewster's law:

[tex] \theta_{1} = arctan(\frac{n_{2}}{n_{1}}) [/tex]

where:

n₁ is the refractive index of the initial medium through which the light propagates (air) = 1

n₂ is the index of the material=?

θ₁ = 46.5°    

[tex] n_{2} = n_{1}tan(\theta_{1}) = tan(46.5) = 1.05 [/tex]

Hence, the material's index refraction is 1.05.

b) The angle of refraction can be found as follows:

[tex] n_{1}sin(\theta_{1}) = n_{2}sin(\theta_{2}) [/tex]

[tex]sin(\theta_{2}) = \frac{n_{1}sin(\theta_{1})}{n_{2}} = \frac{sin(46.5)}{1.05} = 0.69[/tex]

[tex] \theta_{2} = arcsin(0.69) = 43.6^{\circ} [/tex]

Therefore, the angle of refraction is 43.6°.

I hope it helps you!

How would the interference pattern change for this experiment if a. the grating was moved twice as far from the screen and b. the line density of the grating were doubled?

Answers

Answer:

a) the distance between the interference fringes is reduced by half

b) the distance between stripes is doubled

Explanation:

Interference experiments constructive interference is described by the expression

          d sin θ = m λ

let's use trigonometry to find the distance between the interference fringes

              tan θ=  y / L

dodne y is the distance from the central maximum, L the distance from the slit to the observation screen. In general these experiments are carried out at very small angles

            tan θ = sin θ / cos θ = sin θ

we substitute

             sin θ = y / L

             

            d y / L = m  λ

           y = m λ / d L

a) it asks us when the screen doubles its distance

           L ’= 2 L

subtitute in the equation

           y ’= m λ / (d 2L)

           y ’=( m λ / d L) /2

           y ’= y / 2

the distance between the interference fringes is reduced by half

b) the density of the network doubles

      if the density doubles in the same distance there are twice as many slits, so the distance between them is reduced by half

            d ’= d / 2

we substitute

          y ’= m λ (L d / 2)

          y ’= m λ / (L d) 2

          y ’= y 2

the distance between stripes is doubled

Coherent light from a sodium-vapor lamp is passed through a filter that blocks everything except for light of a single wavelength. It then falls on two slits separated by 0.490 mm . In the resulting interference pattern on a screen 2.12 m away, adjacent bright fringes are separated by 2.86 mm . For related problem-solving tips and strategies, you may want to view a Video Tutor Solution of Determining wavelength. Part A What is the wavelength of the light that falls on the slits

Answers

Answer:

λ = 6.61 x 10⁻⁷ m = 661 nm

Explanation:

From the Young's Double Slit experiment, the the spacing between adjacent bright or dark fringes is given by the following formula:

Δx = λL/d

where,

Δx = fringe spacing = 2.86 mm = 2.86 x ⁻³ m

L = Distance between slits and screen = 2.12 m

d = slit separation = 0.49 mm = 0.49 x 10⁻³ m

λ = wavelength of light = ?

Therefore,

2.86 x 10⁻³ m = λ(2.12 m)/(0.49 x 10⁻³ m)

(2.86 x 10⁻³ m)(0.49 x 10⁻³ m)/(2.12 m) = λ

λ = 6.61 x 10⁻⁷ m = 661 nm

Other Questions
Why is environmental science important? The vapour pressure of pure benzene at a certain temperature is 0.850 bar. A non volatile, non electrolyte solid weighing 0.5 g is added to 39.0g of benzene. The vapour pressure of the solution then is 0.845 bar. What is the molecular mass of the solid substance Which expression would produce the largest answer? Select one: a. 3(9 + 3) + 4(6 2) b. 2(32) + 3(2 2) c. 12(8 1) + 5(4 - 5) d. 15(2 + 3) - 3(1 + 3) The root of mutualism, mutual,means...A. together.B. alone.C. only. A regular polygon inscribed in a circle can be used to derive the formula for the area of a circle. The polygon area can be expressed in terms of the area of a triangle. Let s be the side length of the polygon, let r be the hypotenuse of the right triangle, let h be the height of the triangle, and let n be the number of sides of the regular polygon. polygon area = n(12sh) Which statement is true? As h increases, s approaches r so that rh approaches r. As r increases, h approaches r so that rh approaches r. As s increases, h approaches r so that rh approaches r. As n increases, h approaches r so that rh approaches r. a bottle is completely filled with olive oil the mass of the bottle is 500 grams if the density of the oil os 0.92 grams per milliliter what is the volume of the bottle to the nearest milliliter? The greater than symbols looks like this ____________, and the less than symbol looks like? ABO blood type is examined in a Taiwanese population, and allele frequencies are determined. In the population, f (IA) = 0.30, f(IB) = 0.15, and f (i) = 0.55.What are the frequencies of the various genotypes and various phenotypes in this population? Assume Hardy-Weinberg equilibrium. In monopolistic competition, short-run positive economic profits of firms in the market will cause the market demand to expand.A. TrueB. False apples are on sale for $3 and 12 per kilogram is the total cost of the apples proportional to the total yes or no A real estate office handles a 80-unit apartment complex. When the rent is $550 per month, all units are occupied. For each $25 increase in rent, however, an average of one unit becomes vacant. Each occupied unit requires an average of $50 per month for service and repairs. What rent should be charged to obtain a maximum profit The process in which individual organisms change during their lifetime is.... Plz help ASAP!! WILL MARK BRAINLIST for the correct answer Who were Sam Houston and General Santa Anna? calculate the percentage by mass of chlorine in Cobalt (II) chloride (cocl2) Terry Dactel is considering the purchase of an asset having the following cash flows (in 000's):CF Prob.5 20%12 30%18 30%20 20%What is the assets standard deviation (in 000's)? At the beginning of the meeting Kira does not properly lead the team during the ______ stage of team development. Therefore; the team was stuck in the ______ stage. Charlie is a strategist who wants to decide on the appropriate strategy to help his firm "go global." Which of the following should Charlie consider while choosing his strategy?A) He must be aware of the fact that despite globalization and the emergence of the Internet, firm geographic location has actually maintained its importance.B) He should rely on his firm's business-level strategy as a clue to possible strategies pursued globally.C) He should remember that he has only one framework at his disposal to make global strategy decisions.D) He must remember that higher levels of control and a lower likelihood of any loss in reputation go along with less investment-intensive foreign entry modes. modern humans first appeared about __ years ago 4 children wearing various kinds of clothes sitting on bikes with sunlight filtering through trees into grass.Which are made of matter? Check all that apply.airbicyclessound wavespeopleclothessunlighttrees