Answer:
the stones are released from rest at the same time, the stone that is on Earth to have more acceleration must first reach the ground
Explanation:
For this exercise we will use the law of universal attraction on each planet and Newton's second law to calculate the body's acceleration on each planet
F = ma
F = G m M / r²
Where G is the universal gravitational constant, m the mass of the body, M the mass of the planet and r the distance
Let's start with the Earth
G m M / r² = m a
a = G M / r²
let's look for the distance
r = [tex]R_{e}[/tex] + h
a = G M / (R_{e} + h)² = (G M /R_{e}²) 1 /(1 + h /R_{e})² ²
as h << R_{e} we can expand this function
(1 + h /R_{e})⁻² = 1 -2 h / Re + ...
with h /R_{e} it is very small we can despise it
a = G M /R_{e}
the amount in parentheses is called the acceleration due to gravity
g = G M / R_{e}²
g = 6.67 10⁻¹¹ 5.98 10²⁴ / (6.37 10⁶)²
g = 9.8 m / s ²
Now let's calculate the acceleration on Mars, let's use index 2 for this planet
a = G M2 / R_{2}²
a = 6.67 10⁻¹¹ 6.42 10²³ / (3.37 10⁶)
a = 3.77 m / s²
Let's analyze these results as the stones are released from rest at the same time, the stone that is on Earth to have more acceleration must first reach the ground
we can use the equation
y = v₀ t - ½ to t2
v₀ = 0
t = √ (2y / a)
we see that as the acceleration is greater the time decreases
how do you convert a negative charge to a positive charge?
Answer:
Add the negative protons, to make a positive charge. It's just like math a double negative makes a positive.
~Mia Sedillo~You have a large flashlight that takes 4 D-cell batteries, each with a voltage of 1.5 volts. If the current in the flashlight is 2.0 amps, what is the
resistance?
A 12 ohms
B 0.75 ohms
C 3.0 ohms
D.0.5 ohms
E. 6.0 ohms
Answer:
The answer is "C. 3.0 ohms".
Explanation:
Ohm's law states the following:,
V = IR
where:
Voltage (V) = 1.5 volts × 4 batteries = 6.0 volts
Current (I) = 2.0 amps
Resistance (R) = ? ohms
To solve for Resistance (R) the equation must be rearranged this way:
R = V / I
Then, the variables must be replaced with the known values:
R = 6.0 volts / 2.0 amp
R = 3.0 ohms
The answer is C. 3.0 ohms.
------------
P.D: I got it right on PLATO
A chocolate wrapper is 6.7 cm long and 5.4 cm wide. Calculate its area up to
reasonable number of significant figures.
A 1 kg ball is rolling at 3 m/s.
Answer:
It will roll 9 meters in 3 seconds
Explanation:
3 m/s times 3 is 9
Thanks for warning me.
I'll be careful to stay out of its way.
Do you have a question to ask ?
Why is raw sewage a major pollutant in some countries but not in developed countries?
Answer:because developed cities are more equipped to deal with raw sewage than less developed cities
Explanation:
Meeta used an elastic tape to measure the length of her window to stitch a curtain. Do you think she will be able to stitch a curtain of correct measurement? Yes/No . Give scientific reason in detail, also explain the correct method to measure the length of her window.
Answer:
No
Explanation:
She will not be able to measure the length of her window accurately due to instrumental error from her choice of instrument. The elastic nature of her tape would alter the measurement because it will stretch as she is taking her readings, thus reducing the true measurement of the length of her window.
To measure the length of her window, she could use an inelastic tape rule or a metre rule. These instruments would eliminate instrumental error.
Indica qué es una propiedad específica de la materia. Además explica por qué son útiles las propiedades específicas de la materia frente a las generales.
Answer:
Check Explanation
Comprobar explicación
Explanation:
English Translation
Indicate what a specific property of matter is. Also explain why the specific properties of matter are useful compared to the general ones.
Solution
The specific properties of matter are properties that describes the intensive properties of the system. They are properties that do not depend on or change with the extent or size of the system. They are usually obtained by dividing the generalised properties or extensive properties by the extent or size of matter to make them independent of size/extent/Mass.
Examples of specific properties include specific heat capacity, specific volume etc. They usually have units of general units/Mass units.
The specific properties of matter are more important than the general ones because
- They help in general comparisons of the properties of different materials. They are used to rank, classify and compare properties of different materials.
- They are used in reference table/data to easily record easily accessible properties of matter. It helps to record standards that are general and independent of sizes/extents/Mass, thereby keeping the reference table/data/chart precise and concise.
- They provide us with values that are easy to memorize and remember, unlike trying to cram the different properties of different masses/sizes of matter.
In Spanish/En español
Las propiedades específicas de la materia son propiedades que describen las propiedades intensivas del sistema. Son propiedades que no dependen ni cambian con la extensión o el tamaño del sistema. Por lo general, se obtienen dividiendo las propiedades generalizadas o las propiedades extensivas por la extensión o el tamaño de la materia para hacerlas independientes del tamaño / extensión / masa.
Los ejemplos de propiedades específicas incluyen capacidad calorífica específica, volumen específico, etc. Usualmente tienen unidades de unidades generales / unidades de masa.
Las propiedades específicas de la materia son más importantes que las generales porque
- Ayudan en las comparaciones generales de las propiedades de diferentes materiales. Se utilizan para clasificar, clasificar y comparar propiedades de diferentes materiales.
- Se utilizan en la tabla / datos de referencia para registrar fácilmente propiedades de materia fácilmente accesibles. Ayuda a registrar estándares que son generales e independientes de tamaños / extensiones / masa, manteniendo así la tabla / datos / tabla de referencia precisa y concisa.
- Nos proporcionan valores que son fáciles de memorizar y recordar, a diferencia de tratar de agrupar las diferentes propiedades de diferentes masas / tamaños de materia.
Hope this Helps!!!
¡¡¡Espero que esto ayude!!!
Object A has a mass of 10 kg and is moving at a velocity of 2.0
m/s. So Object A's momentum is - kg. m/s.
Answer:20kgm/s
Explanation:
Mass=10kg
Velocity=2m/s
Momentum=mass x velocity
Momentum=10 x 2
Momentum=20
Momentum=20kgm/s
The object with mass m when moving with the velocity, its momentum can be calculated. The momentum of the object A is 20 kg.m/s.
What is momentum?Momentum is the product of mass and velocity of a moving object.
If the momentum is p, the mass of the object is 10 kg and the velocity is 2.0 m/s, then the momentum will be
p = 10 × 2.0
p = 20 kg.m/s
Thus, the momentum of the object A is 20 kg.m/s
Learn more about momentum.
https://brainly.com/question/24030570
#SPJ2
El coeficiente de variación de la resistencia con la temperatura del carbón es -0.0005/°c.Si la resistencia de una resistencia de carbón es de 1000 a0°c , determine su resistencia a 120°c
Answer:
R (120) = 940Ω
Explanation:
The variation in resistance with temperature is linear in metals
ΔR (T) = R₀ α ΔT
where α is the coefficient of variation of resistance with temperature, in this case α = -0,0005 / ºC
let's calculate
ΔR = 1000 (-0,0005) (120-0)
ΔR = -60 Ω
ΔR = R (120) + R (0) = -60
R (120) = -60 + R (0)
R (120) = -60 + 1000
R (120) = 940Ω
Rohit placed a pencil perpendicular to principal axis in front of a converging
mirror of focal length 30 cm. The image formed is twice the size of the pencil.
Calculate the distance of the object from the mirror.
Answer:
45 cm ( in my opinion)♀️
Explanation:
( Using the mirror formula)
1/ u + 1/v = 1/f
( introducing magnification; m into the formula )
u( 1/u + 1/v ) =u×1/f
1 + u/v =u/f
( But u/v =1 ÷v/u= 1/m)
1 +1/m =u/f
(Supposing m is actually equal to 2, and f =30 cm, then;)1 + 1/2 =u/30
2+1= u/15
3=u/15
3×15=u
45 cm=u
Which biome contains mostly coniferous trees and receives 35 to 100 cm of rain per year?
The question is incomplete as it does not have the options which are:
deciduous forest
taiga (boreal forest)
temperate rainforest
tropical rainforest
Answer:
Taiga (boreal forest)
Explanation:
A Biome refers to the habitat which is occupied by flora and fauna living in similar conditions. These biomes are distinguished based on many features like precipitation, temperature and many other physical factors.
In the given question, the biome which receives an annual rainfall of 35 to 100 cm annually and is mostly covered by the coniferous trees is known as "Taiga biome" which is also known as Boreal forest.
The Taiga biome is one of the largest terrestrial biomes which is present in Eurasia and North America. The biome is characterised by the conifers trees and therefore is also known as the Coniferous trees.
Thus, Taiga (boreal forest) is the correct answer.
Answer: Taiga(boreal forest)
Explanation:
what are the dimensions of the rectangle
Answer:
A rectangle has two dimensions:we can measure its length and,perpendicular to that,its width.
Explanation:
Chris has a part time job as a cannon ball catcher for the circus. One day he was located an unknown distance away from the cannon. A cannonball was fired from the cannon at 425 m/s. The speed of sound was 345 m/s. Unfortunately the cannonball went past Chris 0.20 s before he heard the sound of the blast. How far away was the cannon from Chris?
show work with answer for brainliest plz
Answer: 366.56 meters.
Explanation:
Velocity of the cannon ball = 425m/s
Velocity of sound = 345 m/s
For the "position" of both, we have the equation:
Pc = 425m/s*t
Ps = 345m/s*t
Where t is time in seconds.
If the position of Chris is X, we have that if the ball reaches the position of Chris in T seconds, then the soundwave reaches the position of Chris in T + 0.20 seconds, we can write this as:
425m/s*T = X
345m/s*(T + 0.20s) = X
Now we can solve this system of equations. First we can replace the first equation in the second equation and get
345m/s*(T - 0.20s) = 425m/s*T
Now we solve this for T.
345*T + 69 = 425*T
69 = (425 - 345)*T = 80*T
T = 69/80 = 0.8625 seconds.
Now we replace this in the first equation and get:
X = 425m/s*T = 425m/s*0.8625s = 366.56 meters.
A trip is taken that passes through the following points in order
Point A 0 m
Point B 15.0 m
Point C -30.0 m
Point D -20.0 m
Point E 10.0 m
Point F 5.0 m
What is the distance from Point C to Point E?
answers :
20.0 m
40.0 m
-20.0 m
10.0 m
Answer:
40.0 m
...............
Answer:
35
Explanation:
What do you think happened to the energy you transferred to the notebook when you pushed it?
Answer:
It got transferred to kinetic energy
Explanation:
Answer:
The energy changed from kinetic energy to heat energy. Friction causes heating.
The measured mass of a body is found to be 110g. The length is measured by a meter scale. Actual mass and length of the body are 100 g and 10 cm. Find the percentage error in the calculation of density.
Answer:
ok it will be g+181
Explanation:
Calculate the first and second velocities of the car with four washers attached to the pulley, using the formulas
v1 = 0.25 m / t1 , and v2 = 0.25 m / (t2 – t1)
where t1 and t2 are the average times the car took to reach the 0.25 and the 0.50 meter marks. Record these velocities, to two decimal places, in Table E
The first and second velocities of the car, with four washers attached to the pulley, are both 0.125 m/s.
We must apply the following calculations to determine the car's first and second velocities with the four washers attached to the pulley:
v1 = 0.25 m / t1
v2 = 0.25 m / (t2 - t1)
Here, t1 denotes the typical time needed for the car to go 0.25 metres, and t2 is the typical time needed to travel 0.50 metres.Let's say that t1 and t2 are the typical times, each lasting two seconds on average.The first formula allows us to determine v1:
v1 = 0.25 m / 2 s = 0.125 m/s
Using the second formula, we can calculate v2:
v2 = 0.25 m / (4 s - 2 s) = 0.125 m/s
Table E can be used to record these values as the velocities at the relevant distances.
for such more questions on velocities
https://brainly.com/question/80295
#SPJ8
(x) A change in position is called:
(a) Speed
(b) velocity
(c) displacement
(d) distance
Answer:
(c) displacement
sure answer...
Hope it helps....Pls mark as Brainliest!!!
Which of the following particle is responsible for the transfer of static charge?
A. Neutron
B. Electron
C. Proton
D. A & C
Answer:
B. Electron
Static charge is produced by electron transfer.
Explanation:
Answer A: The neutron does not possess a charge and is said to be neutral.
Answer D: Protons and neutrons never move from object to object.
Only negative charges can move freely from one object to another. The energy that comes from these charges particles is called electrical energy.
....
Hope this answer can help you.
The answer is an electron.
A sphere of radius 10.0cm is moulded into a uniform cylindrical wire of same radius r calculate length in millimeters
Answer:
133.33 mm
Explanation:
First we need to find the volume of the sphere. The volume of a sphere is given by:
V = (4/3) * pi * r^3
With a radius of 10 cm, we have:
V = (4/3) * pi * r^3 = 4188.79 cm3
The sphere will be moulded into a cylinder, so the volume will be the same. The volume of a cylinder is:
V = pi * r^2 * h
Where h is the height of the cylinder, and for this case, it will be the length.
The radius is the same old radius, so we have:
4188.79 = pi * 10^2 * h
h = 4188.79 / 100pi = 13.3333 cm
In millimeters, we have h = 133.33 mm
Help
What are energy and work
Answer:
In physics, energy is the quantitative property that must be transferred to an object in order to perform work on, or to heat, the object. Energy is a conserved quantity; the law of conservation of energy states that energy can be converted in form, but not created or destroyed.
In physics, energy is the quantitative property that must be transferred to an object in order to perform work on, or to heat, the object. Energy is a conserved quantity; the law of conservation of energy states that energy can be converted in form, but not created or destroyed.
Explanation:
HOPE THIS HELPSDeterminați numărul protonilor și cel al neutronilor în nucleul atomului
de beriliu .
Determinaţi structura nucleelor izotopilor de uraniu și de toriu Care forţe se numesc forţe nucleare. Enumeraţi particularităţile forţelor nucleare
Answer:
- Beryllium has 4 protons and 5 neutrons in its nucleus.
- The nucleus of the periodic table isotope of Uranium has 92 protons and 146 neutrons.
The nucleus of the periodic table isotope of Thorium has 90 protons and 142 neutrons.
- Check Explanation
- Check Explanation
In Romanian/In limba romana
- Berilul are 4 protoni și 5 neutroni în nucleul său.
- Nucleul izotopului tabelului periodic al Uraniului are 92 de protoni și 146 de neutroni.
Nucleul izotopului tabelului periodic al Toriului are 90 de protoni și 142 de neutroni.
- Verificați Explicația
- Verificați Explicația
Explanation:
English Translation
- Determine the number of protons and neutrons in the nucleus of the atom of beryllium.
- Determine the structure of the nuclei of the isotopes of uranium and thorium
- Which forces are called nuclear forces.
- List the peculiarities of nuclear forces.
Solution
Note that the number of protons in the nucleus of an atom is the atomic number of that atom.
And the mass number of the atom is the sum of protons and neutrons in the nucleus of the atom.
The nucleus of an atom is the most massive part of an atom containing almost exclusively the neutrons and the protons of the atom.
- Beryllium has an atomic number of 4 and a mass number of 9.
Hence, its number of protons = atomic number = 4
(Number of protons) + (Number of neutrons) = mass number
Number of neutrons
= (mass number) - (Number of protons)
= 9 - 4 = 5
- Uranium has atomic number of 92 and mass number of 238.
Number of protons = 92
Number of neutrons = 238 - 92 = 146
Thorium has atomic number of 90 and a mass number of 232.
Number of protons = 90
Number of neutrons = 232 - 90 = 142 neutrons.
- Nuclear forces are the forces that keep the neutrons and protons of an atom bonded to the nucleus of an atom. The constituents of the atom's nucleus are called nucleons. Nuclear forces are the forces between two or more nucleons.
- The nuclear forces are about 10 million times stronger than the forces that bind atoms together in molecules and compounds.
Hence, massive energies are required to break into the nucleus of atoms.
This is why nuclear reactors produce about a million times more energy per kilogram fuel compared to chemical fuel.
However, the range of the nuclear force is short, only about 10⁻¹⁵ m, beyond which it decreases rapidly.
This is why, in spite of its enormous strength, we do not feel anything of this force on the atomic scale or in everyday life.
In Romanian/In limba romana
Rețineți că numărul protonilor din nucleul unui atom este numărul atomic al acelui atom. Și numărul de masă al atomului este suma protonilor și neutronilor din nucleul atomului. Nucleul unui atom este partea cea mai masivă a unui atom care conține aproape exclusiv neutroni și protonii atomului.
- Beriliu are un număr atomic de 4 și un număr de masă de 9.
Prin urmare, numărul său de protoni = numărul atomic = 4
(Număr de protoni) + (Număr de neutroni) = număr de masă
Numărul de neutroni = (număr de masă) - (Număr de protoni) = 9 - 4 = 5
- Uraniul are numărul atomic de 92 și numărul de masă de 238.
Numărul de protoni = 92
Numărul de neutroni = 238 - 92 = 146
Toriul are un număr atomic de 90 și un număr de masă de 232.
Numărul de protoni = 90
Numărul de neutroni = 232 - 90 = 142 neutroni.
- Forțele nucleare sunt forțele care mențin neutronii și protonii unui atom legați de nucleul unui atom.
Constituenții nucleului atomului se numesc nucleoni. Forțele nucleare sunt forțele dintre doi sau mai mulți nucleoni.
- Forțele nucleare sunt de aproximativ 10 milioane de ori mai puternice decât forțele care leagă atomii împreună în molecule și compuși.
Prin urmare, energiile masive sunt necesare pentru a pătrunde în nucleul atomilor.
Acesta este motivul pentru care reactoarele nucleare produc aproximativ un milion de ori mai multă energie pe kilogram de combustibil în comparație cu combustibilul chimic.
Cu toate acestea, domeniul forței nucleare este scurt, doar aproximativ 10⁻¹⁵ m, dincolo de care scade rapid.
Acesta este motivul pentru care, în ciuda puterii sale enorme, nu simțim nimic din această forță pe scara atomică sau în viața de zi cu zi.
Hope this Helps!!!
Sper că acest lucru vă ajută!!!
Uranium-235 has 92 protons. How many neutrons does it have?
Answer:
146 neutrons.
Explanation:
plzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzzz mark me brainliest
Answer: The atomic number of uranium (see periodic table) is 92, and the mass number of the isotope is given as 238. Therefore, it has 92 protons, 92 electrons, and 238 — 92 : 146 neutrons.
Explanation:
Need help on circuit question
Do u think the benefits of nuclear energy outweigh the dangers
Answer:
While there is no such thing as 100 percent safe, having nuclear energy is much safer than you think. It's thousands of times safer than conventional coal and other fossil-fuel-derived energy, not to mention the specter of environmental disaster from continued use of carbon-based energy sources.29 may. 2011
Explanation:
I hope it helps you
When using the lens equation, a negative value as the solution for d baseline i indicates that the image is
A. real
B. virtual
C. upright
D. inverted
When using the lens equation, a negative value as the solution for d baseline i indicates that the image is Virtual. The correct option is B.
What is reflection?When a light strikes on a shiny surface, it reflects back the light ray in the same medium. The phenomenon is called reflection and the ray is called the reflected ray.
From the Len's maker formula, e have
1/f = 1/u + 1/v
where f = radius of curvature /2
So, the negative value as the solution for d baseline i indicates that the image is Virtual.
Thus, the correct option is B.
Learn more about reflection.
https://brainly.com/question/2254222
#SPJ5
Determine the magnetic flux through a square loop of side a if one side is parallel to, and a distance b from a straight wire that carries a current I.
1. If the loop is pulled away from the wire at speed v, what emf is induced in it?
2. Which way does the induced current flow through the loop?
3. How does the emf vary in time, if the initial position of the left vertical side was b0 at time t=0?
4. Determine the force F required to pull the loop away from the line of current.
Answer:
Find the given attachments
Which statement is NOT an advantage of renewable resources? A They produce clean energy. B They are expensive to collect and transform into energy. C They are safe for the environment. D They replenish quickly.
Answer:
B. They are expensive to collect and transform into energy.
Explanation:
All of the other options are positive aspects of renewable resources. B is the only disadvantage of renewable resources given in the question.
Answer:
They are expensive to collect and transform into energy.
Explanation:
Edge
Hydrogen is a nonmetal with many nonmetal properties. Why is it on the periodic table with the metals in Group 1?
Answer:
This is because it has ns1 electron configuration like the alkali metals.
Pls Mark Brainiest, am trying to become Virtuoso
Some drops a ball off of the top of a 125-m-tall building. In this prob-lem, you will be solving for the time it takes the ball to hit the ground.(a)Define your coordinate system, be thorough.(b)Write down the given infor-mation, be sure to include hidden information.(c)State what physics principleis at play here. How do you know this?(d)Select an equation.(e)Solve forthe time it takes for the ball to hit the ground.
Answer:
t = 5.05 s
Explanation:
This is a kinetic problem.
a) to solve it we must fix a reference system, let's use a fixed system on the floor where the height is 0 m
b) in this system the equations of motion are
y = v₀ t + ½ g t²
where v₀ is the initial velocity that is v₀ = 0 and g is the acceleration of gravity that always points towards the center of the Earth
e) y = 0 + ½ g t²
t = √ (2y / g)
t = √(2 125 / 9.8)
t = 5.05 s
