Un móvil recorre una trayectoria en línea recta de 6000 metros y demora 30 minutos. ¿Cuál es su rapidez expresada en Km/h?

Answer:

Explanation:

Mass doesn't matter here because when something is falling, gravity plays fairly; an elephant falls at the same rate of acceleration as does a feather. What DOES matter is everything pertinent to the y-dimension of free-fall:

a = -9.8 m/s/s

v₀ = 0 (since the ball was held before it was dropped)

v = ??

Δx = -8 m (negative because the ball drops this far below the point from which it was released).

Putting all this together in one equation:

v² = v₀² + 2aΔx and filling in this equation:

v² = (0)² + 2(-9.8)(-8) and

v² = 156.8 so

v = 12.5 which rounds to 13 if you're using 2 sig figs, and rounds to 10 if you're only using 1 (which you should be, according to the way the numbers have been given in this problem)

Answer:

mechanical waves,

.

the quality of a sound governed by the rate of vibrations producing it; the degree of highness or lowness of a tone.

.

If the amplitude increases the volume increases and vice versa.

.

The type of medium affects a sound wave as sound travels with the help of the vibration in particles.

.

The higher the frequency, the shorter the wavelength.

Explanation:

Answer:

1 . Soundwave

2. pitch are sounds that are high or low corresponding and according to a certain frequency measured in Hertz

3. volume is the increase in sound or decrease in sound how loud or soft something is while amplitude is strength of sound

4. frequency is measured in Hertz one wave per second and wavelength is distance between corresponding points of two recurring and consecutive sound waves

After half of a revolution ...

==> Distance = π•r

==> Displacement = 2•r

Answer:

4p

Explanation:

If you halve the volume the pressure will double as they are inversely proportional. If you double the temperature the particles have double the kinetic energy so the pressure will double again.

So:

p×2×2 = 4p

Answer:

P V = n R T

P2 V2 / (P1 V1) = T2 / T1

P2 = (T2 / T1) (V1 / V2)  P1   =   2 * 2 = 4

Answer:

0.4

Explanation:

A concave lens is a diverging lens, so it will always have a negative focal length. Image distance is always negative for a concave lens because it forms virtual images.

From the lens formula;

1/f = 1/u+ 1/v

- 1/2 = 1/3 - 1/v

1/v = 1/3 + 1/2

v= 6/5

v= 1.2 cm

Magnification = image distance/object distance

Magnification = 1.2cm/3cm

Magnification = 0.4

Answer: Vehicle Balance

Explanation:

Vehicle balance simply means how the weight of a vehicle is distributed across its tires which connects to the road

It should be noted that there'll be a shift in the balance of a vehicle when the braking, acceleration, or turning bring about a scenario in which the weight of th vehicle moves from one area to another.

When fundamental units are combined, they result in derived units. RC (which means Resistance Capacitance) is a derived unit and its unit in the simplest form is Coulomb per Ampere (C/A)

Given that:

Capacitance (C) [tex]\to[/tex] Farads (f)

and

[tex]1f = 1\frac CV[/tex] ----- 1 farad = 1 capacitance per volt

Resistance (R) [tex]\to[/tex] Ohms [tex]\Omega[/tex]

[tex]1 \Omega = 1\frac{V}{A}[/tex]

The unit of RC is the product of the unit of R by the unit of C.

i.e.

[tex]RC = 1f \times 1\Omega[/tex]

Substitute [tex]1f = 1\frac CV[/tex]

[tex]RC = 1\frac CV \times 1\Omega[/tex]

Substitute [tex]1 \Omega = 1\frac{V}{A}[/tex]

[tex]RC = 1\frac CV \times 1\frac VA[/tex]

Cancel out volts (V)

[tex]RC = 1\frac CA[/tex]

[tex]\frac CA[/tex] means Coulomb per Ampere

Hence, the unit of RC is Coulomb per Ampere.

Read more about units at:

https://brainly.com/question/10167613

Answer:

products would appear after the raw materials

Explanation:

raw material + raw material = product (anything deriving from combining two materials)

Answer:

a) 98.1 Joules

b) 49.05 N × sin(θ)

c) 9.81 × sin(θ)

d) The velocity of the block at the bottom of the plane, v is approximately 6.264 m/s

e) 98.1 Joules

Explanation:

The given parameters of the block are;

The mass of the block, m = 5.0 kg

The distance down the plane the block slides, h = 2.0 m

The friction between the block and the surface = 0

Let θ represent the angle of inclination oof the plane

a) The gravitational potential energy, P.E. = m·g·h

Where;

g = The acceleration due to gravity ≈ 9.81 m/s²

∴ P.E. ≈ 5.0 kg × 9.81 m/s² × 2.0 m = 98.1 Joules

The gravitational potential energy, P.E. ≈ 98.1 Joules

b) The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex], is given as follows;

[tex]w_{\parallel}[/tex] = w × sin(θ) = m·g·sin(θ)

∴ [tex]w_{\parallel}[/tex] ≈ 5.0 kg × 9.81 m/s² × sin(θ) = 49.05 × sin(θ) N

The component of the weight of the block parallel to the plane, [tex]w_{\parallel}[/tex] ≈ 49.05 N × sin(θ)

c) The component of the weight along the inclined plane = The force with which the block moves along the inclined plane, therefore;

[tex]w_{\parallel}[/tex] = m·g·sin(θ) = m·a

Where a represents the acceleration of the block along the plane

Therefore, by comparison, we have;

g·sin(θ) = a

∴ a ≈ 9.81 × sin(θ)

d) Given that the motion of the block is 2.0 m downwards, we have;

The velocity of the block at the bottom of the plane, v² = 2·g·h

Therefore, v² ≈ 2 × 9.81 m/s²× 2.0 m = 39.24 m²/s²

v = √(39.24 m²/s²) ≈ 6.264 m/s

e) The kinetic energy at the bottom of the plane, K.E. = (1/2)·m·v²

∴ K.E. = (1/2) × 5.0 kg × 39.24 m²/s² = 98.1 J

Answer:

[tex]W=7.56\times 10^{-19}\ J[/tex]

Explanation:

Given that,

The work function for silver is 4.73 eV.

We need to find the value of the work function from electron volts to joules.

We know that,

[tex]1\ eV=1.6\times 10^{-19}\ J[/tex]

For 4.73 eV,

[tex]4.73\ eV=1.6\times 10^{-19}\times 4.73\\\\=7.56\times 10^{-19}\ J[/tex]

So, the work function for silver is [tex]7.56\times 10^{-19}\ J[/tex].

Answer:

True.

Explanation:

The velocity vector is constant in magnitude but changing in direction. Because the speed is constant for such a motion, many students have the misconception that there is no acceleration. ... But the fact is that an accelerating object is an object that is changing its velocity.

[tex]\boxed{\large{\bold{\blue{ANSWER~:) }}}}[/tex]

[tex]\sf What \: is \: acceleration? \\ \\ \sf The \: rate \: of \: change \: of \: velocity \: of \: an \\ \sf object \: with \: respect \: to \: time \\ \sf is \: known \: as \: acceleration. [/tex]

Answer:

345 K

Explanation:

Temperature can be defined as a measure of the degree of coldness or hotness of a physical object.

Generally, it is measured with a thermometer and its units are Celsius (°C), Kelvin (K) and Fahrenheit (°F).

Given the following data;

To convert the temperature in degree Celsius to Kelvin, we would use the following mathematical expression;

Kelvin = 273 + °C

Substituting into the formula, we have;

Kelvin = 273 + 72

Kelvin = 345 K

Therefore, the temperature of 72°C will be equivalent to 345 K on the Kelvin scale.

Solution :

When the spacecraft is at halfway point, the distance from the Earth as well as Mars are same. We have to account the masses of the planets. The gravitational force that is exerted by the Earth is greater because of its combined mass with the space probe.

The mass of Earth is greater than the mass of Mars. Therefore, the force of Earth is more than Mars.

The question is incomplete, the complete question is;

Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.

Answer:

It is incorrect because sodium phosphate is a compound that has a single composition

Explanation:

A compound is a neutral substance made up of two or more atoms which are chemically combined together.

Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.

Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.

Answer:

C) Potential energy due to intermolecular forces.

400 m2

Explanation:

Pressure = Force ÷ Area

5 N/m2 = 2000 N ÷ A

A = 2000 N ÷ 5

= 400 m2

If a force of 2000N is applied, the area that the force is applied to is 400 m²

The word "force" has a specific meaning in science. At this level, calling a force a push or a pull is entirely appropriate. A force is not something an object "has in it" or that it "contains."

One thing experiences a force from another. There are both living things and non-living objects in the concept of a force.

The amount of force applied to a certain region is referred to as pressure. The force per unit area is called pressure. F in this condensed version of the equation stands in for the force, which is expressed in newtons.

Given that the pressure of 5 N/m²

Force is 2000N

Pressure = Force ÷ Area

5 N/m² = 2000 N ÷ A

A = 2000 N ÷ 5 = 400 m²

Therefore, the area that the force is applied to is 400 m².

To learn more about force, refer to the link:

https://brainly.com/question/19529052

#SPJ2

Answer:

A

Explanation:

Consider a question you may not have considered before. Suppose you have a mole of sodium in a container that contains nothing that it will react with. A mole of anything is 6.02 * 10^23 (in this case atoms).

Suppose that every one of those atoms has contributed 1 electron to something.

Do you think it would be safe to touch the container knowing that there are 6.02 * 10^23 positive charges all eager to get another electron, because they don't like repelling each other.

Safe or not? I'll give you a hint. A lightning bolt does not contain anywhere near 6.02*10^23 charges. No where near.

So -- since you never get a shock from just touching anything, There must not be electrons or ions present.

The answer is A

Answer:

speed i uniform

Explanation:

if the speed is constant

Answer:

A

Explanation:

if it has a constant acceleration

Answer:

b

Explanation:

bc

Answer:

[tex]f = m \frac{v1 - v2}{t} \\ = 120 \times \frac{25 - 5}{2} \\ = 120 \times \frac{20}{2} \\ = 120 \times 10 \\ = 1200N \\ thank \: you[/tex]

Answer:

6. a. friction between a tire and the road

7. c. energy of motion

8. c. the force with which a moving vehicle hits another object

Explanation:

6. As a car moves along the road, the tires push back against the ground. As tires push back against the ground, the road exerts and opposing force to the motion of the tires. This opposing force is the friction between the tires and the road. This opposing force between the tires and the rad is called traction.

So, the answer is a

7. As an object moves, it has energy. This energy due to its motion is called kinetic energy.

So, the answer is c

8. When a moving vehicle hits another object, it exerts a force on the object. The process of the vehicle hitting the other object is called impact and the force exerted on the object is called the force of impact.

So, the answer is c.

Answer:

the acceleration of the elevator is increasing

Explanation:

For this exercise we propose the solution using Newton's second law

         F -W = m a

         F = m (g + a)

If the net force increases, it implies that the acceleration of the elevator is increasing, since the acceleration of gravity is constant as the ascent is accelerating.

In component form, the displacement vectors become

• 350 m [S]   ==>   (0, -350) m

• 400 m [E 20° N]   ==>   (400 cos(20°), 400 sin(20°)) m

(which I interpret to mean 20° north of east]

• 550 m [N 10° W]   ==>   (550 cos(100°), 550 sin(100°)) m

Then the student's total displacement is the sum of these:

(0 + 400 cos(20°) + 550 cos(100°), -350 + 400 sin(20°) + 550 sin(100°)) m

≈ (280.371, 328.452) m

which leaves the student a distance of about 431.8 m from their starting point in a direction of around arctan(328.452/280.371) ≈ 50° from the horizontal, i.e. approximately 431.8 m [E 50° N].

Answer: hi your question is incomplete  attached below is the complete question

answer :

magnitude of acceleration :  | a | = g = 9.81 m/s^2

direction : a = - g j

Explanation:

Neglecting Air resistance

magnitude of acceleration :

| a | = g = 9.81 m/s^2

Direction of acceleration

a = - g j  ( given that the direction of acceleration is against the acceleration due to gravity i.e. in the opposite direction )

Explanation:

The Simple Pendulum. A simple pendulum is defined to have a point mass, also known as the pendulum bob, which is suspended from a string of length L with negligible mass ((Figure)). Here, the only forces acting on the bob are the force of gravity (i.e., the weight of the bob) and tension from the string.

hope it helps you

Answer:

65000g

24.325 hrs

7500m

Answer:

I) 65000 g   II)24.325 hours  III)7500 m

Explanation:

I) 1 kg = 1000 g

65 kg = 65 * 1000 g = 65000 g

II) 1 hour = 3600 seconds

1 second = 1/3600 hours

87570 seconds = 87570 * 1/3600 hours =24.325 hours

III) 1 km = 1000 m

7.5 km = 7.5 * 1000 m = 7500 m

[tex]option \: (a) \: is \: correct.[/tex]

Explanation:

Yes, I was wrong. Pressure increases as the area decreases.

As per the Figure A, the truck is so heavy and having a greater mass. So, the area of contact between the tyres and the road increases and decreases it's pressure on the road due to the increase in area.

As per the Figure B, You know the nature of Tomato that it is soft and smooth to touch and also lighter mass when it's compared with the truck. As it having a lighter mass, it can be cut through the sharp knife. The area of contact decreases and pressure increases on the vegetables.

Answer:

Option number B

Explanation:

The pressure is indirectly proportional to the area therefore pressure decreases when the area increases, and pressure increases when the area decreases

Answer:

[tex]K.E = 0.1905 J[/tex]

Explanation:

From the question we are told that:

Length [tex]L=1.4m[/tex]

Mass [tex]m=180g[/tex]

Angular Velocity [tex]\omega=1.80rads/s[/tex]

Generally the equation for Kinetic energy K.E is mathematically given by

 [tex]K.E =0.5 (1/3 ML^2 )w^2[/tex]

 [tex]K.E =0.5 ( 1/3 * 0.18 * 1.4^2 ) 1.8^2[/tex]

 [tex]K.E = 0.1905 J[/tex]

Answer:

PE = 3.92x10^16J

potential energy

Explanation:

PE = m*g*h

mass of water = 1000kg/m³

(4*10^10m³)*1000kg = 4*10^13kg

PE = (4*10^13kg)*(9.81m/s²)*(100m)

PE = 3.92x10^16J