Use the diagram below to answer the questions that follow for 1 point each. Predict the change seen in the balloon in the freezer Explain your prediction Use the equation to provide additional support for your prediction
NO LINK ANSWERS
Answers
Answer:
The particle model of matter is one of the most useful scientific models because it describes matter in all three states. Understanding how the particles of matter behave is vital if we hope to understand science!
The model also helps us to understand what happens to the particles when matter changes from one state to another.
The following diagram shows different changes of state, as well as which processes are the reverse of each other. Melting and freezing are the reverse processes of each other and so are evaporation (boiling) and condensation.
Explanation:
Related Questions
help please rlly easy
Answers
Answer:
If its that easy do it yourself not tryin to be mean but this is just a stem and leaf diagram
Explanation:
A balloon holds 50.0 mL of nitrogen at 25° C and a pressure of 736 mm Hg.
According to Boyle's Law, answer the following questions for 2 points each:
What will be the effect on the pressure inside the balloon if the volume is decreased to 25 mL?
Explain how this would demonstrate Boyle's Law.
Explain Boyle's Law in terms of the kinetic energy of molecules.
This is a written question
No link answers please!!!
Answers
Answer:
A container holds 50.0 mL of nitrogen at 25° C and a pressure of 736 mm Hg. What will be its volume if the temperature increases by 35° C?
✓ For this problem we would use the equation for Charles' Law which compares the direct relationship between Volume and Temperature when Pressure is …
Calculate the energy transferred by a 12V hairdryer, running on a current of 0.50A, that is left on for 8.0 minutes.
Answers
Step 1
List all the information in symbol form and change into appropriate and consistent SI units if required.
V=12V
I=0.5A
t = 8.0 minutes
= 8 × 60
= 480s
E=?
Step 2
Use the correct formula.
E=IVt
Step 3
Calculate the answer by putting the numbers into the formula.
E = IVt
= 0.5 × 12 × 480
= 2880J
The answer is 2880J :) hope this helps!
Which characteristics belong to Whittaker’s classification system? Select two options.
a.three domains
b.six domains
c.two kingdoms
d.five kingdoms
e.five levels
f.seven levels
g.eight levels
Answers
Answer:
Five kingdoms & Seven levels
Explanation:
Robert H. Whittaker proposed five kingdom classical system for living organisms in 1969. These were: Kingdom Monera, Kingdom Protista, Kingdom Fungi, Kingdom Animalia, and Kingdom Plantae. His work was the improvement of earlier work conducted by Carl Linnaeus who proposed three kingdom classification system (Animalia, Plantae, and Protista).
Whittaker's system further categorized each kingdom to seven levels. These were: Kingdom → Phylum → Class → Order → Family → Genus → Species. This categorization was based on similarities in organisms at different levels.
PS: The scientific name of each organism is the combination of genus and family name.
If Jay pushes on a box with a force of 20N to the right and Bradley pushes on a box 15N to the left, what is the net force on the box?
Answers
Answer:
454665
Explanation:
Answer:
5N right
Explanation:
20-15=5
name all of the processes of the rock cycle... and number them by the picture.... no links
Answers
Answer:
1. magma
2. igneous rock
3. sediments
4. sedimentary rock
5. metamorphic rock
6. melting
7. cooling, heating
8. weathering and erosion
9. compaction and cementation
10. heat and pressure
11. heat and pressure
12. weathering and erosion
Explanation:
just trust me .!!
PLZZZZZ! HELP! I'll give brainliest to the first correct answer, five stars, and a heart!
Answers
Answer:
frequency: 2nd choice
period: 4th choice
amplitude: 1st choice
wavelength: 3rd choice
speed: 5th choice
This is a written question.
No link answers please!!!
1.Predict the change seen in the balloon in the freezer
2.Explain your prediction
3.Use the equation to provide additional support for your prediction
Answers
Answer:
Solids keep their shape and cannot be compressed. Let us see if the particle model can help us understand why solids behave in this way.
In a solid, the particles are packed close to each other in fixed positions. They are locked into place, and this explains why solids have a fixed shape. Look at the following images of sodium chloride (table salt). Do you remember the formula for sodium chloride?
Macroscopic view of sodium chloride
Submicroscopic view of sodium chloride
Table salt crystals are hard and have a fixed shape.
Can you see how the chloride atoms (purple) alternate with the sodium atoms (yellow) in a fixed arrangement?
Take a good look at the picture of the particles in a solid (table salt) above. You will see that they are packed in a regular arrangement. There are very small spaces between the particles in a solid.
Particles are held together by forces of attraction. In solids, these forces are strong enough to hold the particles firmly in position.
Does that mean the particles in a solid do not move at all? No. The particles in a solid move a little bit. They vibrate in their fixed positions. The more energy the particles have, the faster and more strongly they vibrate.
Do you see how we have used the particle model of matter to explain the properties of solids that we can observe? For example, the particles in solids are closely packed and have strong forces between them explains why solids have a fixed shape and you cannot compress them.
The liquid state
An important characteristic of liquids is that they flow. They fill containers they are poured into. Liquids are also not very compressible. How can these properties be explained?
Orange juice is a liquid, which can be poured.
In the liquid state, particles do not have fixed positions. They move about freely, but they stay close together because the forces of attraction between them are quite strong, but not as strong as in solids.
Have you noticed how a liquid always takes the shape of the container it is in? Within the liquid, the particles slip and slide past each other. This is why liquid flows. Their particles are free to move around, filling the spaces left by other particles. Look at the image of the juice being poured. Let's zoom in and have a look at what the particles are doing as the juice is poured.
The particles in a liquid have small spaces between them, but not as small as in solids. The particles in a liquid are loosely arranged which means they do not have a fixed shape like solids, but they rather take the shape of the container they are in.
The speed at which the particles move around inside the liquid depends on the energy of the particles. When we heat a liquid, we are giving the particles more energy and speeding them up.
In gases, the particles move at even greater speeds.
The gaseous state
Gases spread out quickly to fill all the space available to them. Think of when you blow up a balloon. The air that you blow into the balloon fills up the whole balloon. A gas will fill the entire space that is available to it. This is because the particles in a gas have no particular arrangement.
Gases do not have a fixed shape. Think about the balloon again: the gas fills the entire space inside the balloon. You can squeeze the balloon, changing the shape.
Gases fill the space available to them.
Gases do not have a fixed shape.
Gas particles move very fast, much faster than in solids and liquids. The particles in a gas possess a lot of energy.
Have you ever tried to compress the gas in a syringe or in a bicycle pump? Why do you think you can compress the gas?
In gases, the forces between particles are very weak. This explains why the particles in gases are not neatly arranged. They are not held together tightly and there are large spaces between them. These spaces are much larger than in the solid and liquid state.
Explanation:
This is a schematic for a clothes dryer appliance. This appliance dries clothes primarily by converting--
A) Thermal energy into electrical energy
B) Electrical energy into thermal energy and mechanical energy
C) Kinetic energy into thermal energy
D) Electrical energy into mechanical energy
Answers
The cloth dryer appliance works on the energy transformation from electrical energy into mechanical energy and thermal energy. Hence, option B is correct.
What is energy transformation?According to energy conservation law, energy can neither be created nor be destroyed but it can be transformed from one form to the other. Thus, energy lost by one form can be gained in other form.
In electrical devices, electrical energy is converting to various other forms. For instance, in lamps, electrical energy is converted to the light energy. Similarly in fan electrical energy is converted to the mechanical energy.
In a cloth dryer the electrical energy is converted to the mechanical energy to make it operate and this further produces the thermal energy sufficient to dry the clothes.
Find more on energy transformation :
https://brainly.com/question/8210521
#SPJ6
Make a 29 day timeline. Along the timeline draw and label the phases of the Moon starting with a full moon, crescent, first quarter, gibbous and full. Finish the second half showing the waning moons back to the new moon.
PLEASE Include the drawing and your answer to the question above
PLEASE NO FAKE ANSWERS.
Answers
URGENTTT PLEASE HELP
Answers
A baseball is thrown at 90 mph from east to west over a distance of 60 ft. What is
true of the ball's motion?
Its speed is 90 mph to the west.
Its acceleration is 30 mph.
Its velocity is 90 mph to the west.
Its acceleration is 150 mph.
Answers
Answer:
Its acceleration is 30 mph.
Explanation:
The true of the ball's motion will be that the velocity is 90 mph to the west. Velocity is the vector quantity. Because it shows the direction.
What is acceleration?
Acceleration is defined as the rate of change of the velocity of the body. Its unit is m/sec². It is a vector quantity. It requires both magnitudes and direction to define.
The given data in the problem is
The velocity of baseball is,V= 90 mph
The distance travelled in mile is; d=0.0113636 mile
The time period is obtained as;
[tex]\rm t = \frac{d}{v} \\\\ \rm t = \frac{0.0113636}{90} \\\\ t=1.2 \times 10^{-4} \ hr[/tex]
The acceleration is obtained is 0.00108 mile/hr².
Hence, the true of the ball's motion will be that the velocity is 90 mph to the west.
To learn more about acceleration, refer to the link;
https://brainly.com/question/969842
#SPJ3
While playing hockey in gym class, Timmy is trying to send a plastic puck across the floorand into the goal. Which of the following best describes the forces acting on the plastic puck as it travels across the floor and into to the goal?
A.electromagnetic and gravity
B.gravity and friction
C.mechanical force and friction
D.magnetism and friction
Answers
Answer:
C. mechanical force and friction
Explanation:
Timmy's muscles are striking the puck through the stick. The force from the muscles moves the sick, which hits the puck. (EDIT) In addition, the puck is slowed as it travels across the floor, via friction.
Answer:
gravity and friction
Explanation:
The Humbolt squid can travel 410 meters in 60 seconds. The squids average speed is ____. (Round to the nearest tenth)
Answers
Answer:
They swim at speeds up to 24 km/h (15 mph; 13 kn).
Explanation:
NO MFKN LINK AND YOU WILL ET THE BRAINLIEST IF CORRECT!!!
10.A force that is applied to an object by a person or another object is called?
(10 Point)
A. Applied Force
B. Unbalanced Force
C. Balanced Force
Answers
Answer:
That is-
A. Applied Force
hope this helped! :)
If its not A den its
C but I think its A
Which is the source of variations in a population of organisms? No files or links 8th Grade. Please help ASAP.
A- Changes in enviroment
B- Changes in genes
C- The interaction of genes with an enviroment
D- The interaction of individuals with an enviroment
Answers
The dots in electron dot diagrams represent ____ ____.
A core electrons
B electrical charge
C valence electrons
Answers
Answer:
C. valence electrons
Explanation:
Each dot is a valence electron.
Also, in my school, we called them Lewis Dot Structures.
The difference in electrical potential energy between two places is called:
a. resistance
b. friction
c. induction
d. voltage
Answers
The correct option is, (d) voltage.
The difference in electrical potential energy between two places is called voltage.What is the difference in electrical potential energy between the two places?The external effort required to move a charge in an electric field from one position to another is known as an electric potential difference, or voltage. A test charge with a value of +1 will experience an electric potential difference, which is a shift in potential energy.What is a difference in electric potential energy?The electric potential difference is the difference in electric potential (V) between the final and the initial location when work is done upon a charge to change its potential energy.What is the potential difference between two charges?The word "potential difference" refers to the magnitude of the electrostatic force acting between two charged objects. Depending on the polarity of the objects, a charged body will attempt to travel in one direction if it is placed between two objects with a potential difference.Learn more about electrical potential energy here:
https://brainly.com/question/14306881
#SPJ2
have u ever wanted to just sleep all day and night
Answers
Answer:
yes ofc
Explanation:
A Motion Demonstration Model is shown in the diagram. At which of these positions does the ball have both the greatest potential energy and the least kinetic energy?
A) Position W
B) Position X
C) Position Z
D) Position Y
Answers
Answer:
C
Explanation:
C) position z
Because the ball is no longer moving and is at the highest position that it can be (compared to w, x, and y).
NO MFKN LINK
9.The distance something travels in a certain amount of time, such as 45mph, is
(10 Point)
A. Velocity
B. Speed
C. Time
Answers
Answer:
The answer is A
Explanation:
Velocity is the rate of change of its position with respect to a frame of reference, and is a function of time.
