Using any data you can find in the ALEKS Data resource, calculate the equilibrium constant k at 25.0 celsius for the following reaction.
6Cl2(g)+2Fe2O3(s)----->4FeCl3(s)+3O2
Round answer to 2 significant digits.

Answer:

n = 2.23 moles

Explanation:

Given the following data;

Standard temperature = 273 K

Standard pressure = 101.325 kPa

Volume = 50 liter

R = 8.314 J/mol·K  

To find the number of moles, we would use the ideal gas law formula;

PV = nRT

Where;

Making n the subject of formula, we have;

[tex] n = \frac {PV}{RT} [/tex]

Substituting into the formula, we have;

[tex] n = \frac {101.325*50}{8.314*273} [/tex]

[tex] n = \frac {5066.25}{2269.722} [/tex]

n = 2.23 moles

Therefore, 2.23 moles of carbon dioxide at STP will fit in a 50 liter container.

Answer:

Theoretical yield is 138.4 g

Explanation:

In the first step we determine the reaction:

3Mg + N₂ → Mg₃N₂

Mass of reactant is 100 g. We assume the nitrogen is in excess, so we work with Mg. We convert mass to moles:

100 g . 1mol/ 24.3g = 4.11 moles of Mg.

Ratio is 3:1. 3 moles of Mg can produce 1 mol of nitride

Our 4.11 moles, may produce (4.11 . 1)/3 = 1.37 moles of Mg₃N₂

We convert mass to moles, to find the theoretical yield:

1.37 mol . 100.9 g/mol = 138.2 g

Answer: Moles of hydrogen required are 4.57 moles to make 146.6 grams of methane, [tex]CH_{4}[/tex].

Explanation:

Given: Mass of methane = 146.6 g

As moles is the mass of a substance divided by its molar mass. So, moles of methane (molar mass = 16.04 g/mol) are calculated as follows.

[tex]Moles = \frac{mass}{molar mass}\\= \frac{146.6 g}{16.04 g/mol}\\= 9.14 mol[/tex]

The given reaction equation is as follows.

[tex]C + 2H_{2} \rightarrow CH_{4}[/tex]

This shows that 2 moles of hydrogen gives 1 mole of methane. Hence, moles of hydrogen required to form 9.14 moles of methane is as follows.

[tex]Moles of H_{2} = \frac{9.14}{2}\\= 4.57 mol[/tex]

Thus, we can conclude that moles of hydrogen required are 4.57 moles to make 146.6 grams of methane, [tex]CH_{4}[/tex].

Answer:

none All have the same kinetic energy

Explanation:

This question is incomplete, the complete question is;

A certain liquid X has a normal boiling point of 150.4 °C and a molar boiling point elevation constant kb is 0.60 °Ckgmol⁻¹.

A solution is prepared by dissolving some urea (NH22CO) in 750 g of X. This solution boils at 150.9 °C . Calculate the mass of urea that was dissolved. Round your answer to 3 significant digits.

Answer:

the mass of urea that was dissolved is 37.5 g

Explanation:

Given the data in the question;

normal boiling point of X; Tb⁰ = 150.4 °C

boiling point of solution Tb = 150.9 °C

Change in boiling point Δt = Tb - Tb⁰  = 150.9 °C - 150.4 °C = 0.5 °C

Kb = 0.6 °C.kg.mol⁻¹

V = 750 g

Now, we know that

Δt = Kb × molality

so

0.5 = 0.6 × molality

molality = 0.5 / 0.6

molality = 0.833

we know that molar mass of urea is 60 g/mol

so

molality = mass × 1000 / molar mass × volume( g )

we substitute

0.833 = ( mass × 1000 ) / ( 60 × 750 )

0.833 = ( mass × 1000 ) / 45000

0.833 × 45000 = mass × 1000

mass = ( 0.833 × 45000 ) / 1000

mass = 37485 / 1000

mass = 37.485 ≈ 37.5 g   { 3 significance figure }

Therefore, the mass of urea that was dissolved is 37.5 g

Answer:

Tin + silver trioxonitrate V -------->Tin IV nitrate + silver

Explanation:

The term word equation refers to an equation in which the reactants and products are written in words rather than chemical symbols.

Note than tin is above silver in the electrochemical series hence silver will be displaced by tin as follows;

Tin + silver trioxonitrate V -------->Tin IV nitrate + silver

Answer:look down below

Explanation:

The statements that are true about hands that are immersed in the water are:

1. The hand that was in hot water would feel cold.

2. The hand that was in cold water would feel hot.

The correct option is B 1. and 2.

Temperature is the measurement of the hotness or coldness of any object. It is measured in Celsius or kelvin. Our body has nerves that feel the different temperatures of any object. The high temperature is called hot and the low temperature is called cold.

When Louis put his hand in the warm water and one hand in the cold water. He feels the temperature of both glasses of water. Then he put both hands in the normal water.

So the hand that is warm would feel the water as cold and the hand with cold water would feel the water as hot.

Thus, the correct option is B. 1. and 2.

Learn more about temperature, here:

https://brainly.com/question/15267055

#SPJ5

Answer: The product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.

Explanation:

When two or more chemical substances react together then it forms new substances and these new substances are called products.

For example, [tex]3N_{2}O_{5} + 3H_{2}O \rightarrow 6HNO_{3}[/tex]

This shows that nitric acid [tex](HNO_{3})[/tex] is the product formed and it is an acidic substance.

Hence, the solution at equilibrium will be acidic in nature.

Thus, we can conclude that the product of the given reaction is [tex]HNO_{3}[/tex] and the solution at equilibrium will be acidic.

Answer:

The best existing methods of control—artemisinin-based drug treatment and insect control with chemical sprays and treated bednets—can reduce the burden of disease substantially, and can even eliminate the disease in some regions,

hope this will help you more

Answer:

0.0900 mol/L

Explanation:

A chemist makes 330. mL of nickel(II) chloride working solution by adding distilled water to 220. mL of a 0.135 mol/L stock solution of nickel(II) chloride in water. Calculate the concentration of the chemist's working solution. Round your answer to significant digits.

Step 1: Given data

Step 2: Calculate the concentration of the final solution

We prepare a dilute solution from a concentrated one. We can calculate the concentration of the working solution using the dilution rule.

C₁ × V₁ = C₂ × V₂

C₂ = C₁ × V₁/V₂

C₂ = 0.135 mol/L × 220. mL/330. mL = 0.0900 mol/L

Answer:

the result for the following are (a) P is directly proportional to n

(b) V is directly proportional to T (c) P is directly proportional to T (d) T is inversly proportional to V (e) P is inversely proportional to V

Answer:

True

Explanation:

The length of covalent bond depends upon the size of atoms and the bond order.

Explanation:

Saturated fats are defined as the fat where fatty acid chains contain only single bonds.

For example, stearic acid, palmitic acid etc.

Unsaturated fats are defined as the fat where fatty acids contain one or more number of double bonds on the carbon atoms.

For example, oleic acid, palmitoleic acid etc.

Answer:

Close to the calculated endpoint of a titration - Partially open

At the beginning of a titration - Completely open

Filling the buret with titrant - Completely closed

Conditioning the buret with the titrant - Completely closed

Explanation:

'Titration' is depicted as the process under which the concentration of some substances in a solution is determined by adding measured amounts of some other substance until a rection is displayed to be complete.

As per the question, the stopcock would remain completely open when the process of titration starts. After the buret is successfully placed, the titrant is carefully put through the buret in the stopcock which is entirely closed. Thereafter, when the titrant and the buret are conditioned, the stopcock must remain closed for correct results. Then, when the process is near the estimated end-point and the solution begins to turn its color, the stopcock would be slightly open before the reading of the endpoint for adding the drops of titrant for final observation.

Answer:

so 0.15 moles X 22.4 dm3/mole=3.36 dm3. Next we find the moles of hexane combusted, and then the moles of CO2. Finally, we find the volume of CO2 using the fact that at STP, 1 mole of gas = 22.4 dm3.

Answer:

all light waves can be described in terms of their speed, frequency and wavelength

Explanation:

Hope it helps u.....

Answer:

Substrate

Explanation:

In biochemical sciences, a substrate is a substance that is acted upon by an enzyme to yield a product. Enzymes are known for catalyzing biochemical reactions. The substances that are usually worked with during this catalytic process are termed as SUBSTRATES.

Substrates, which are usually changed during the process, binds to the active site on the enzyme and form an enzyme-substrate complex.

According to this question, pyruvate is converted to lactate in a reaction that is catalyzed by the enzyme lactate dehydrogenase. This means that the compound on which the enzyme works, pyruvate, is called the SUBSTRATE.

Sodium metal reacts rapidly with water to form a solution of sodium hydroxide (NaOH) and hydrogen gas (H2). This reaction is exothermic.

Equation:

2Na + 2H²0 --------}- 2NaOH + H²

Answer:

Scientific method.

Explanation:

Scientific method is the way taken to acquire scientific knowledge. It includes experiments, statistical analysis of existing data, and all kinds of observations of the world around us, while theoretical research is based on deriving certain theories about the world from basic principles, in a mathematical or logical way. The scientific method applies to both types of research, and emphasizes that scientific research is objective, that it can be verified by other scientists, and that knowledge is not acquired without context, but in a way that leads to a greater understanding of previous research and the world. we live in. To contribute to this, researchers are expected to clearly record both their findings and the methods they use to arrive at the results.

Explanation:

In the formula of [tex]CaCl_2[/tex] we can see that there are 2mol Cl in 1 molecule of CaCl2. So, now we can do some math to find out how many mol of Cl there are in 1.9mol CaCl2!

[tex]1.9molCaCl_2*\frac{2molCl}{1molCaCl_2}[/tex]

So, there are 3.8mol Cl

Answer:

1.6 x 10⁻²⁴ moles

Explanation:

We have 0.984 molecules of F₂. We know that 1 mol is equal to 6.022 x 10²³ molecules. Thus, we have a conversion factor: 1 mol/6.022 x 10²³ molecules

So, we multiply the molecules of F₂ by the conversion factor to calculate the moles:

0.984 molecules x  1 mol/6.022 x 10²³ molecules = 1.6 x 10⁻²⁴ moles

Answer:

3 > 2> 1

Explanation:

Aromatic compounds undergo electrophilic substitution reaction with several electrophiles.

Some substituted benzenes are more reactive towards electrophilic aromatic substitution than unsubstituted benzene.

Certain groups of substituents increase the ease with which an aromatic compound undergoes aromatic substitution.

If we look at the compounds closely, we will notice that only toluene leads to easy reaction with CH3Cl / AlCl3. Thus is due to the +I inductive effect of -CH3 which stabilizes the negatively charged intermediate produced in the reaction.

Answer:

1.30 m

Explanation:

First we calculate the number of moles of solute in the solution, using the definition of molarity:

Then we calculate the mass of solvent, using the given volume and density:

Now we calculate the molality of the solution:

The question is incomplete, the complete question is;

What functional group results when cyclopentanone reacts with ethylamine in the presence of trace acid? A) cyanohydrin B) semicarbazone C) imine D) enamine E) oxime

Answer:

imine

Explanation:

An imine is an unsaturated amine. An imine contains the carbon- nitrogen double bond.

Imines are obtained when a carbonyl compound is condensed with NH3 or an amine. The reaction involves several steps in its mechanism.

Since cyclopentanone is a ketone (carbonyl compound) and ethylamine is an amine,in the presence of trace acid, condensation of the two compounds occur to yield an imine

Answer:

19000 torr

Explanation:

From the question given above, the following data were obtained:

Initial volume (V₁) = 0.150 L

Initial pressure (P₁) = 1520 torr

Final volume (V₂) = 0.012 L

Temperature = constant

Final pressure (P₂) =?

The final pressure of the gas can be obtained by using the Boyle's law equation as illustrated below:

P₁V₁ = P₂V₂

1520 × 0.150 = P₂ × 0.012

228 = P₂ × 0.012

Divide both side by 0.012

P₂ = 228 / 0.012

P₂ = 19000 torr

Thus, the final pressure of the gas is 19000 torr

Answer:

80.8%

Explanation:

Let's consider the following balanced equation.

4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)

The mass obtained of Al₂O₃ (experimental yield) is 84.0 g. The theoretical yield of Al₂O₃ is 104 g. We can calculate the percent yield of Al₂O₃ using the following expression.

%yield = (experimental yield / theoretical yield) × 100%

%yield = (84.0 g / 104 g) × 100% = 80.8%

Answer:

Percent Yield = 80.8%

Explanation:

We can find the percent yield of a reaction using the equation:

Percent yield = Actual yield (g) / Theoretical Yield (g) * 100

Where Actual yield is the amount of product produced (84.0g)

And theoretical yield is the mass produced assuming a 100% of product (104.0g)

Replacing the computed values:

Percent yield = 84.0g / 104.0g * 100

Percent Yield = 80.8%

Answer:

[tex]_{19} ^{40} K[/tex] → [tex]_{20} ^{40} Ca[/tex] + [tex]_{-1} ^{0} e[/tex] + ¯v

Explanation:

[tex]_{19} ^{40} K[/tex] is an unstable potassium isotope which has the capacity to undergo beta decay. During the decay process, it transforms to calcium atom with a release of beta particle and an antineutrino.

The required nuclear equation is:

                                              [tex]_{19} ^{40} K[/tex] → [tex]_{20} ^{40} Ca[/tex] + [tex]_{-1} ^{0} e[/tex] + ¯v

The calcium formed due to this process is a stable atom.

Answer:

The entropy change of carbon dioxide = 0.719 kJ/k

Explanation:

Given:

1.5 m - 3 insulated rigid tank contains 2.7 kg of carbon dioxide at 100 kPa

The objective is to determine the entropy change of carbon dioxide

Formula used:

ΔS=

Solution:

On considering,

[tex]C_{P} =0.846 kJ/kg K\\C_V=0.657 kJ/kg k\\[/tex]

ΔS=[tex]mc_{v} lu\frac{p_{2} }{P_{1} }[/tex]

On substituting the values,

ΔS=[tex]2.7*0.657lu\frac{150}{100}[/tex]

ΔS=0.719 kJ/k

The entropy change is "0.719 kJ/K".

Given values are:

Mass of tank,

Pressure,

Rised pressure,

Assumption of constant specific heat is,

As we know the formula,

→ [tex]\Delta S = mC_v \ ln(\frac{P_2}{P_1} )[/tex]

         [tex]= (2.7)(0.657) \ ln (\frac{150}{100} )[/tex]

         [tex]= 1.7739\times 0.4055[/tex]

         [tex]= 0.7193 \ kJ/K[/tex]

Thus above answer is right.

Learn more:

https://brainly.com/question/20340354