Using the following reaction:

H2SO4 (aq) + 2NaOH (aq) → Na2SO4 (aq) + 2H2O (l)

Calculate the molarity of the H2SO4 solution if 14.92 mL of NaOH was necessary to reach the endpoint of a titration. The molarity of the NaOH solution was 0.83 M and 25.18 mL of H2SO4 was added to the Erlenmeyer flask.

Answer:

The full amount (5.00 g) will be dissolved in 1 L of water at 25°C.

Explanation:

The molecular weight (MW) of Vanillin (C₈H₈O₃) is calculated from the chemical formula as follows:

MW(C₈H₈O₃) = (12 g/mol x 8) + (1 g/mol x 8) + (16 g/mol x 3) = 152 g/mol

If 0.070 mol of C₈H₈O₃ are soluble per liter of water at 25°C, the maximum mass that can be dissolved in 1 L is:

0.070 mol x 152 g/mol = 10.64 g

Since 5.00 g is lesser than the maximum amount that can be dissolved (10.64 g), the added amount will be completely dissolved in 1 L of water at 25°C.

Answer:

The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.

Explanation:

pH is a measure of the acidity or alkalinity of an aqueous solution. The pH indicates the concentration of hydrogen ions present in certain solutions. Mathematically it is defined as the opposite of the base 10 logarithm or the negative logarithm of the activity of hydrogen ions, whose equation is

pH= -log [H⁺]

So, being pH= 2.6 and replacing in the definition of pH:

2.6= -log [H⁺]

[tex][H^{+} ]=10^{-2.6}[/tex]

[H⁺]=2.51*10⁻³

pOH is a measure of the concentration of hydroxide ions (OH⁻). The sum between the pOH and the pH results in 14:

pOH + pH= 14

So, being pH= 2.6:

pOH + 2.6= 14

pOH= 14 - 2.6

pOH= 11.4

The pOH is defined as the negative logarithm of the activity of the hydroxide ions. That is, the concentration of OH⁻ ions:

pOH= - log [OH⁻]

Being pOH= 11.4 and replacing

11.4= -log [OH⁻]

[tex][OH^{-} ]=10^{-11.4}[/tex]

[OH⁻]= 3.98*10⁻¹²

The concentrations of hydronium and hydroxide ions in a solution with pH 2.6 are 2.51*10⁻³ and 3.98*10⁻¹² respectively.

Answer:

"1.4 mL" is the appropriate solution.

Explanation:

According to the question,

Now,

Increase in volume will be:

⇒ [tex]\Delta V = \alpha\times v_0\times \Delta \epsilon[/tex]

By putting the given values, we get

           [tex]=1.12\times 10^{-4}\times 500\times 25[/tex]

           [tex]=1.12\times 10^{-4}\times 12500[/tex]

           [tex]=1.4 \ mL[/tex]

Answer:

Mass CO2 = 3.75 grams

Mass H2O = 2.30 grams

Mass SO2 = 2.73 grams

Explanation:

Step 1: Data given

Density of Liquid ethyl mercaptan, C2H6S = 0.84 g/mL

Volume of ethyl mercaptan = 3.15 mL

Step 2: The reaction

2C2H6S + 9O2 → 4CO2 + 6H2O + 2SO2

Step 3: Calculate mass of ethyl mercaptan

Mass = Volume * density

Mass ethyl mercaptan = 3.15 mL * 0.84 g/mL

Mass ethyl mercaptan = 2.646 grams

Step 4: Calculate moles ethyl mercaptan

Moles = mass / molar mass

Moles ethyl mercaptan = 2.646 grams / 62.13 g/mol

Moles ethyl mercaptan = 0.04259 moles

Step 5: Calculate moles of other products

For 2 moles ethyl mercaptan we need 9 moles O2 to produce 4 moles CO2, 6 moles H2O and 2 moles SO2

For 0.04259 moles we need 0.1917 moles O2 to produce:

2*0.04259 = 0.08518 moles CO2

3*0.04259 = 0.1278 moles H2O

1*0.04259 = 0.04259 moles SO2

Step 6: Calculate mass produced

Mass = moles * molar mass

Mass CO2 = 0.08518 moles * 44.01 g/mol

Mass CO2 = 3.75 grams

Mass H2O = 0.1278 moles * 18.02 g/mol

Mass H2O = 2.30 grams

Mass SO2 = 0.04259 moles * 64.07 g/mol

Mass SO2 = 2.73 grams

Answer:

That is a " ball and stick " model which represents carbon compounds.

Explanation:

This is the answer. Hope it helps you find what you're looking for.

Explanation:

For this question, we apply the equation: Q = mCp AT Where m is the mass of the substance, Cp

is its specific heat capacity and AT is the

temperature change. Q = 896 x 0.45 x (5-94)

Q = -35884.8 Joules

So about -36 kilojoules of heat is released.

mark as brainliest

The forces in gases are weaker than forces in solids and liquids.

Because they have more kinetic energy that overcomes the force of attraction.

Answer:

Density and rigidity

Answer: it will be basic

pH that ranges from 0-6 are acid

pH of EXACTLY 7 is neutral

pH greater than 7 are strongly basic or base

Answer: The moles of gas present in the cylinder is 0.34 moles.

Explanation:

Given: [tex]P_{1}[/tex] = 2.7 atm,   [tex]V_{1}[/tex] = 3.1 L,     [tex]T_{1}[/tex] = 300 K

[tex]P_{2}[/tex] = ?,      [tex]V_{2}[/tex] = 9.4 L,       [tex]T_{2}[/tex] = 610 K

Formula used to calculate the final temperature is as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}[/tex]

Substitute the values into above formula as follows.

[tex]\frac{P_{1}V_{1}}{T_{1}} = \frac{P_{2}V_{2}}{T_{2}}\\\frac{2.7 atm \times 3.1 L}{300 K} = \frac{P_{2} \times 9.4 L}{610 K}\\P_{2} = \frac{5105.7}{2820} atm\\= 1.81 atm[/tex]

Now, moles present upon heating the cylinder are as follows.

[tex]P_{2}V_{2} = n_{2}RT_{2}\\1.81 atm \times 9.4 L = n_{2} \times 0.0821 L atm/mol K \times 610 K\\n_{2} = \frac{17.014}{50.081} mol\\= 0.34 mol[/tex]

Thus, we can conclude that moles of gas present in the cylinder is 0.34 moles.

Answer:

Ka = 3.45x10⁻⁶

Explanation:

First we calculate [H⁺], using the given pH:

To solve this problem we can use the following formula describing a monoprotic weak acid:

We input the data that we already know:

And solve for Ka:

Answer:

c. CH3CH2CH(CH3)CHO

Explanation:

Hello there!

In this case, according to the process for the one-step oxidation of a primary alcohol with a moderately strong oxidizing agent like pyridinium chlorochromate (PCC), whereby an aldehyde is produced, we infer that the corresponding product will be 2-methylbutanal, which matches with the choice c. CH3CH2CH(CH3)CHO according to the following reaction:

[tex]CH_3CH_2CH(CH_3)CH_2OH\rightarrow CH_3CH_2CH(CH_3)COH[/tex]

Regards!

Answer:

zero

Explanation:

I I think one should be so accurate with measurements and experiments

Refer to the attachment.

Hope this helps you...

Explanation:

mass=kilogram (kg)

temperature=kelvin

power=watt

hope it helps

Answer:

The halogen is Iodine.

Explanation:

Using the ideal gas equation, we find the number of moles of gas present, n.

PV = nRT where P = pressure of gas = 1.41 atm, V = volume of gas = 109 mL = 0.109 L, n = number of moles of gas, R = molar gas constant = 0.082 L-atm/mol-K and T = temperature of gas = 398 K

Since PV = nRT, making n subject of the formula, we have

n = PV/RT

substituting the values of the variables into the equation, we have

n = 1.41 atm × 0.109 L/(0.082 L-atm/mol-K × 398 K)

n = 0.15369 atm-L/32.636 L-atm/mol

n = 0.0047 mol

Since n = m/M where m = mass of gas = 1.19 g and M = relative molecular mass of gas

So, M = m/n

M = 1.19 g/0.0047 mol

M = 252.7 g

Since halogens are diatomic the relative atomic mass is M/2 = 252.7g/2 = 126.34 g

From tables, the only halogen with this atomic mass is Iodine.

So, the halogen is Iodine.

Answer:

1/2 f1 will cross

Explanation:

answer it

Answer:

less than 5 centimeters because it is a nonvascular plant

Explanation:

Mosses are a group of plants under the division Bryophyta. They are said to be the most primitive plant life in existence as they lack true roots, stems and leaves. They also lack vascular system, hence, they are regarded as non-vascular plants. They usually grow in very small sizes (about 0.2 - 10cm).

According to this question, Penny bought a club moss plant for her water garden and needs to know how tall the plant will grow so she know how much space it will need. Since it is a miss plant that lacks vascular tissues i.e. nonvascular, it will likely grow less than 5 centimeters in height.

Answer:

d

Explanation:

Answer: 3.4 × 10 -1 equal 33.5 cs. May I have brainiest? pls. (the -1 is to the power of the ten.

Answer:

this answer is for first one

Explanation:

A higher evalations, where the atmospheric pressure is much lower, the boiling point increase with increased pressure up to the critical point where the gas and liquid properties become identical

Answer:

The choice that is not an indicator of a chemical change is "State of matter changes". More common than not, chemical reactions produce energy in the form of light or heat. Along with energy, they also produce a new substance called the product that could be in any state of matter (solid, gas, or liquid).

Explanation:

Answer:

d

Explanation:

Answer:

Nitrate NO3

here's your answer, hope it helps you

Answer:

118.06 mL

Explanation:

The neutralization reaction between HBr (acid) and Ba(OH)₂ (base) is the following:

2HBr + Ba(OH)₂ → BaBr₂ + 2H₂O

According to the equation, 2 moles of HBr react with 1 mol Ba(OH)₂. Thus, at the equivalence point the moles of acid and base react completely:

2 moles HBr = 1 mol Ba(OH)₂

We can replace the moles by the product of the molar concentration (M) and volume (V):

2 x (M HBr) x (V HBr) = M Ba(OH)₂ x V Ba(OH)₂

Now, we introduce the data in the equation to calculate the volume in mL of Ba(OH)₂:

V Ba(OH)₂ = (2 x (M HBr) x (V HBr))/M Ba(OH)₂

                 = (2 x 0.311 M x 57.7 mL)/(0.304 M)

                 = 118.06 mL

Therefore, 118 mL of Ba(OH)₂ are needed.

Answer:

10.1 h

Explanation:

Let's consider the reduction half-reaction of iron from an aqueous solution of iron (III) chloride.

Fe³⁺(aq) + 3 e⁻ ⇒ Fe(s)

We can calculate the time required to produce 5.00 moles of Fe using the following relationships.

[tex]5.00molFe \times \frac{3 mole^{-} }{1molFe} \times\frac{96486C}{1mole^{-} } \times \frac{1s}{40.0C} \times \frac{1h}{3600s} = 10.1 h[/tex]

Answer:

Active transport by the Na+-K+ pump

Explanation:

Active transport by the Na+-K+ pump

Maintenance (and restoration) of the resting ion concentrations depends on the Na+-K+ pump. Once gated ion channels are closed, the combined action of the pump and ion leakage (particularly that of K+) establishes a resting membrane potential in a typical neuron of around âˆ'70 mV.

it's 0.2cm different from the expected value, wich was 14.6cm

how many percent that are is calculated in the screenshot.

rounded it's 1.37%

Answer:

The general preparation of esters( for example ethyl ethanoate) is through a process known as ESTERIFICATION.

Explanation:

The formation of an ester by the reaction between an alkanol and an acid is known as esterification. This reaction is extremely slow and reversible at room temperature, and is catalyzed by a high concentration of hydrogen ions.

In the preparation of one of the simpler esters known as ETHYL ETHANOATE the reactants include ethanol(an alcohol) and glacial ethanoic acid(a carboxylic acid) in the presence of concentrated tetraoxosulphate VI acid as a CATALYST. Note that, a catalyst is any substance that is able to increase the rate of a chemical reaction.

The mixture is warmed in a water bath( hot but not boiling) for about 25 minutes. The mixture is poured into a beaker partially filled with a sodium or calcium chloride to remove interacted ethanol. The ethyl ETHANOATE floats on the mixture as oily globules.

Answer:

because the have stronger electrostatic force