Violet light of wavelength 405 nm ejects electrons with a maximum kinetic energy of 0.890 eV from a certain metal. What is the binding energy (in electronvolts) of electrons to this metal

Answers

Answer 1

Answer:

  Ф = 2.179 eV

Explanation:

This exercise has electrons ejected from a metal, which is why it is an exercise on the photoelectric effect, which is explained assuming the existence of energy quanta called photons that behave like particles.

            E = K + Ф

the energy of the photons is given by the Planck relation

            E = h f

we substitute

           h f = K + Ф

           Ф= hf - K

the speed of light is related to wavelength and frequency

            c = λ f

            f = c /λ

            Φ = [tex]\frac{hc}{\lambda } - K[/tex]

let's reduce the energy to the SI system

            K = 0.890 eV (1.6 10⁻¹⁹ J / 1eV) = 1.424 10⁻¹⁹ J

calculate

           Ф = 6.63 10⁻³⁴ 3 10⁸/405 10⁻⁹  -1.424 10⁻¹⁹

           Ф = 4.911 10⁻¹⁹ - 1.424 10⁻¹⁹

           Ф = 3.4571 10⁻¹⁹ J

         

we reduce to eV

           Ф = 3.4871 10⁻¹⁹ J (1 eV / 1.6 10⁻¹⁹ J)

           Ф = 2.179 eV


Related Questions

If the mass of an object is 15 kg and the velocity is -4 m/s, what is the momentum?

Answers

momentum p= m x v = 15 x -4 = -60 N.s

A spherically mirrored ball is slowly lowered at New Years Eve as midnight approaches. The ball has a diameter of 8.0 ft. Assume you are standing directly beneath it and looking up at the ball. When your reflection is half your size then the mirror is _______ ft above you.

Answers

Answer:

The distance between mirror and you is 2 ft.

Explanation:

diameter, d = 8 ft

radius of curvature, R = 4 ft

magnification, m = 0.5

focal length, f = R/2 = 4/2 = 2 ft

let the distance of object is u and the distance of image is v.

[tex]\frac{1}{f}=\frac{1}{v}+\frac{1}{u}\\\\\frac{1}{2}=\frac{1}{v}+\frac{1}{u}\\\\v = \frac {2 u}{u - 2}[/tex]

Use the formula of magnification

[tex]m = \frac{v}{u}\\\\0.5 =\frac { u}{u - 2}\\ \\u - 2 = 2 u \\\\u = -2 ft[/tex]

A ball is launched from the ground with a horizontal speed of 30 m/s and a vertical speed of 30 m/s. How far horizontally will it travel in 2 seconds?
A. 30 m
B. 90 m
C. 45 m
D. 60 m

Answers

Answer:

It will travel Vx * t = 30 m/s * 2 s = 60 m

Distance = velocity x time
= 30m/s x 2 sec
= 60 m/s

Convert 385k to temperature of

Answers

Answer:

233.33°F

Explanation:

(385K - 273.15) * 9/5 + 32 = 233.33°F

3. A microscope is focused on a black dot. When a 1.30 cm -thick piece of plastic is placed over the dot, the microscope objective has to be raised 0.410 cm to bring the dot back into focus. What is the index of refraction of the plastic

Answers

The index of refraction of the plastic is approximately 1.461

The known values in the question are;

The thickness of the piece of plastic placed on the dot = 1.30 cm

The height to which the microscope objective is raised to bring the dot back to focus = 0.410 cm

The unknown values in the question are;

The index of refraction

Strategy;

Calculate the refractive index by making use of the apparent height and real height method for the black dot under the thick piece of plastic

[tex]\mathbf{ Refractive \ index, n = \dfrac{Real \ depth}{Apparent \ depth}}[/tex]

The real depth of the dot below the piece of plastic, d₁ = 1.30 cm

The apparent depth of the dot, d₂ = The actual depth - The height to which the microscope is raised

Therefore;

The apparent depth of the dot, d₂ = 1.30 cm - 0.410 cm = 0.89 cm

[tex]The \ refractive \ index, \ n = \dfrac{d_1}{d_2}[/tex]

Therefore, n = 1.30/0.89 ≈ 1.461

The refractive index of the plastic block, n ≈ 1.461

Learn more about refractive index of light here;

https://brainly.com/question/24321580

Cho dòng điện xoay chiều trong sản xuất và sinh hoạt ở nước ta có tần số f = 50Hz. Tính chu kỳ T và tần số góc ω?

Answers

Answer:

T = 1/f = 1/50(s)

ω = 2πf = 100π (rad/s)

(vote 5 sao nhó :3 )

Flapping flight is very energy intensive. A wind tunnel test
on an 89 g starling showed that the bird used 12 W of
metabolic power to fly at 11 m/s. What is its metabolic power for starting flight?

Answers

Answer:

The metabolic power for starting flight=134.8W/kg

Explanation:

We are given that

Mass of starling, m=89 g=89/1000=0.089 kg

1 kg=1000 g

Power, P=12 W

Speed, v=11 m/s

We have to find the metabolic power for starting flight.

We know that

Metabolic power for starting flight=[tex]\frac{P}{m}[/tex]

Using the formula

Metabolic power for starting flight=[tex]\frac{12}{0.089}[/tex]

Metabolic power for starting flight=134.8W/kg

Hence, the metabolic power for starting flight=134.8W/kg

A 2.0 kg puck is at rest on a level table. It is pushed straight north with a constant force of 5N for 1.50 s and then let go. How far does the puck move from rest in 2.25 s?

Answers

Answer:

d = 6.32 m

Explanation:

Given that,

The mass of a puck, m = 2 kg

It is pushed straight north with a constant force of 5N for 1.50 s and then let go.

We need to find the distance covered by the puck when move from rest in 2.25 s.

We know that,

F = ma

[tex]a=\dfrac{F}{m}\\\\a=\dfrac{5}{2}\\\\a=2.5\ m/s^2[/tex]

Let d is the distance moved in 2.25 s. Using second equation of motion,

[tex]d=ut+\dfrac{1}{2}at^2\\\\d=0+\dfrac{1}{2}\times 2.5\times (2.25)^2\\\\d=6.32\ m[/tex]

So, it will move 6.32 m from rest in 2.25 seconds.

Steel railway tracks are laid at 8oC. What size of expansion gap are needed 10m long rail sections if the ambient temperature varies from -10oC to 50oC? [Linear expansivity of steel = 12 x]​

Answers

Answer:

Gap left = Change in length on heating

Gap=Initial length×Coefficient of linear expansion×change in temperature

Gap=10×0.000012×15m

⟹Gap=0.0018 m

this is an example u have to put your equation in it

which characteristic of nuclear fission makes it hazardous?

Answers

Answer:The radioactive waste

Explanation:Fission is the splitting of a heavy unstable nucleus into two Lighter nuclei

A roller coaster uses 800 000 J of energy to get to the top of the first hill. During this climb, it gains 500 000 J of potential energy and pauses (velocity = 0) for a fraction of a second at the very top before heading down the other side.

a) Draw a sankey diagram for a roller coaster's climb.

Answers

A roller coaster uses 800 000 J of energy to get to the top of the first hill. During this climb, it gains 500 000 J of potential energy and pauses for a fraction of a second at the very top before heading down the other side. At the top of the hill total, the kinetic energy of the roller coaster would be zero as the velocity is zero at the top of the hill, therefore the total mechanical energy is only because of potential energy.

What is mechanical energy?

Mechanical energy is the combination of all the energy in motion represented by total kinetic energy and the total stored energy in the system which is represented by total potential energy.

The expression for total mechanical energy is as follows

ME= KE+PE

As total mechanical energy is the sum of all the kinetic as well as potential energy stored in the system.As given in the problem a roller coaster uses 800000 J of energy to get to the top of the first hill. During this climb, it gains 500 000 J of potential energy which means 300000 J of energy is lost in the frictional energy while climbing the hill,

Thus at the top of the hill, the total energy of the roller coasters is only due to the potential energy.

Learn more about mechanical energy from here brainly.com/question/12319302

#SPJ2

What is not one of the main uses of springs?
A. Car suspension
B. Bike suspension
C. The seasons
D. Clock making

Answers

Hi! I believe the answer is C. or The seasons because all the other options use springs when making cars, bikes, and clocks. I hope this helped. Goodluck :)

Condensation is the process of ____________________.
a. planetesimals accumulating to form protoplanets.
b. planets gaining atmospheres from the collisions of comets.
c. clumps of matter adding material a small bit at a time.
d. clumps of matter sticking to other clumps.
e. clouds formed from volcanic eruptions.

Answers

D. I hope my answer helps you!

a person lifts 60kg on the surface of the earth, how much mass can he lift on the surface of the moon if he applies same magnitude of force​

Answers

Explanation:

Hey there!

According to the question;

A person can lift mass of 60 kg on earth.

mass(m1) = 60kg

acceleration due to gravity on earth (a) = 9.8m/s²

Now;

force (f) = m.a

= 60*9.8

= 588 N

Since, there is application of same magnitude of force on moon,

mass(m) =?

acceleration due to gravity on moon (a) = 1.67m/s²

Now;

force (f) = m.a

588 = m*1.67

m = 352.09 kg

Therefore, the person who can lift the mass of 60 kg on earth can lift mass of 352 kg on moon.

Hope it helps!

A bicyclist moves along a straight line with an initial velocity vo and slows downs. Which of the following the best describes the signs set for the initial position, initial velocity and the acceleration ?​

Answers

The sign set after the slowdown of the bicycle will be positive for the position,  negative for velocity, and negative for acceleration.

What is velocity?

The rate at which an object's position changes when observed from a specific point of view and when measured against a specific unit of time is known as its velocity.

According to Que, when a bicyclist moves in a straight line and slows down, then the velocity decrease as displacement is decreasing, and the acceleration also decreases only displacement increases.

Therefore, the sign set for the position is +ve, for velocity it is -ve, and for acceleration also -ve

To know more about Velocity:

https://brainly.com/question/19979064

#SPJ1

A biker slows down after traveling in a long, straight line at initial velocity v0. Which of the following the best \sdescribes the signs set for the initial position, initial velocity and the acceleration? Initial position Initial velocity Acceleration

A. Positive Negative Negative

B. Positive Positive Negative

C. Negative Positive Negative

D. Negative Negative Positive

E. Negative Negative Negative

given A=4i-10j and B= 7i+5j find b such that A+bB is a vector pointing along the x-axis (i.e has no y component)​

Answers

Answer:

-4/7

Explanation:

Given the following

A=4i-10j and B= 7i+5j

A+ bB = 4i-10j + (7i+5j)b

A+ bB =  4i-10j + 7ib+5jb

A+ bB =

The vector along the x-axis is expressed as i + 0j

If the vector A+ bB is pointing in the direction of the x-axis then;

[tex]A+ bB * \frac{i+0j}{|i+0j|} = 0 \\ (4+7b)i-(10-5b)j* \frac{i+0j}{\sqrt{1^2+0^2} } = 0\\(4+7b)i-(10-5b)j *(i+0j) = 0\\4+7b-0 =0\\7b=-4\\b = -4/7[/tex]

Hence the value of b is -4/7

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

According to the statement, we have following system of vectorial equations:

[tex]\vec A = 4\,\hat {i} - 10\,\hat{j}[/tex] (1)

[tex]\vec {B} = 7\,\hat{i} + 5\,\hat{j}[/tex] (2)

[tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] (3)

By applying (1) and (2) in (3):

[tex](4\,\hat{i}-10\,\hat{j}) + \beta\cdot (7\,\hat{i}+5\,\hat{j}) = c\,\hat{i}[/tex]

[tex](4+7\cdot \beta)\,\hat{i} +(-10+5\cdot \beta)\,\hat{j} = c\,\hat{i}[/tex]

And we get two scalar equations after analyzing each component:

[tex]4+7\cdot \beta = c[/tex] (4)

[tex]-10+5\cdot \beta = 0[/tex] (5)

We solve for [tex]\beta[/tex] in (5):

[tex]\beta = 2[/tex]

And for [tex]c[/tex] in (4):

[tex]c = 4+7\cdot (2)[/tex]

[tex]c = 18[/tex]

The value of [tex]\beta[/tex] such that [tex]\vec C = \vec A + \beta \cdot \vec B = c\,\hat{i}[/tex] is 2.

Please see this question related to Sum of Vectors for further details: https://brainly.com/question/11881720

how will be electric lines of force where intensity of electric field is maximum ?
a. wider
b. +ve to -ve
c. narrow
d. -ve to +ve

Answers

i'm pretty sure the answer is A wider

Electric lines of force where intensity of electric field is maximum when its wider.

What is Electric field?

The physical field that surrounds electrically charged particles and exerts force on all other charged particles in the field, either attracting or repelling them, is known as an electric field (also known as an E-field. It can also refer to a system of charged particles' physical field.

Electric charges and time-varying electric currents are the building blocks of electric fields. The electromagnetic field, one of the four fundamental interactions (also known as forces) of nature, manifests itself in both electric and magnetic fields.

Electrical technology makes use of electric fields, which are significant in many branches of physics. For instance, in atomic physics and chemistry, the electric field acts as an attracting force to hold atoms' atomic nuclei and electrons together.

Therefore, Electric lines of force where intensity of electric field is maximum when its wider.

To learn more about electric field, refer to the link:

https://brainly.com/question/1443103

#SPJ2

As the speed of a particle approaches the speed of light, the momentum of the particle Group of answer choices approaches zero. decreases. approaches infinity. remains the same. increases.

Answers

Answer:

approaches infinity

Explanation:

There are two momentums, the classical momentum which is equal to the product of mass and velocity, and the relativistic momentum, the one we should look at when we work with high speeds, and this happens because massive objects have a speed limit, in this case, we are approaching the speed of light, so we need to work with the relativistic momentum instead of the classical momentum.

The relativistic momentum can be written as:

[tex]p = \frac{1}{\sqrt{1 - \frac{u^2}{c^2} } } *m*u[/tex]

where

u = speed of the object relative to the observer, in this case we have that u tends to c, the speed of light.

m = mass of the object

c = speed of light.

So, as u tends to c, we will have:

[tex]\lim_{u \to c} p = \frac{1}{\sqrt{1 - \frac{u^2}{c^2} } } *m*u[/tex]

Notice that when u tends to c, the denominator on the first term tends to zero, thus, the relativistic momentum of the object will tend to infinity.

Then the correct option is infinity, as the particle speed approaches the speed of light, the relativistic momentum of the particle tends to infinity.

A sinewave has a period (duration of one cycle) of 645 μs (microseconds). What is the corresponding frequency of this sinewave, in kHz

Answers

The corresponding frequency of this sinewave, in kHz, expressed to 3 significant figures is: 155 kHz.

Given the following data:

Period = 645 μs

Note: μs represents microseconds.

Conversion:

1 μs = [tex]1[/tex] × [tex]10^-6[/tex] seconds

645 μs = [tex]645[/tex] × [tex]10^-6[/tex] seconds

To find corresponding frequency of this sinewave, in kHz;

Mathematically, the frequency of a waveform is calculated by using the formula;

[tex]Frequency = \frac{1}{Period}[/tex]

Substituting the value into the formula, we have;

[tex]Frequency = \frac{1}{645 * 10^-6}[/tex]

Frequency = 1550.39 Hz

Next, we would convert the value of frequency in hertz (Hz) to Kilohertz (kHz);

Conversion:

1 hertz = 0.001 kilohertz

1550.39 hertz = X kilohertz

Cross-multiplying, we have;

X = [tex]0.001[/tex] × [tex]1550.39[/tex]

X = 155039 kHz

To 3 significant figures;

Frequency = 155 kHz

Therefore, the corresponding frequency of this sinewave, in kHz is 155.

Find more information: brainly.com/question/23460034

Four identical balls are thrown from the top of a cliff, each with the same speed. The
first is thrown straight up, the second is thrown at 30° above the horizontal, the third
at 30° below the horizontal, and the fourth straight down. How do the speeds and
kinetic energies of the balls compare as they strike the ground? Ignore the effects of
air resistance. Explain fully using the concepts from this unit.

Answers

The comparison of the speeds and kinetic energy of the identical balls are as follows

The speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

The reason for the above comparison results areas follows;

Known parameters;

First ball is thrown straight up

Second ball is thrown 30° above the horizontal

Third ball it thrown 30° below the horizontal

The fourth ball is thrown straight down

Unknown:

Comparison of the speed and kinetic energy of the four balls

Method:

The kinetic energy, K.E. = (1/2) × m × v²

The velocity of the ball, v = u × sin(θ)

Where;

u = The initial velocity of the ball

θ = The reference angle

For the first ball thrown straight up, we have;

θ = 90°

∴ [tex]v_y[/tex] = u

The final velocity of the ball as it strikes the ground is v₂ = u² + 2gh

Where;

h = The height of the cliff

∴ Kinetic energy of first ball, K.E.₁ = (1/2) × m × (u₁² + 2gh)²

For the second ball thrown 30° to the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy  K.E.₂ = (1/2) × m × ((0.5·u₂)² + 2·g·h)²

For the third ball thrown at 30° below the horizontal, we have;

K.E. = (1/2) × m × ((u×sin30)² + 2·g·h)² = K.E. = (1/2) × m × ((0.5·u)² + 2·g·h)²

Kinetic energy K.E.₃ = (1/2) × m × ((0.5·u₃)² + 2·g·h)²

For the fourth ball thrown straight down, we have;

Kinetic energy K.E.₄ = (1/2) × m × (u₄² + 2gh)²

Therefore, as the ball strike the ground, the speed and the kinetic energy of the first and fourth ball are equal, while the speed and kinetic energy of the second and third balls are equal

u₁ = u₄, K.E₁ = K.E.₄, u₂ = u₃, K.E₂ = K.E.₃

Learn more about object kinetic energy of objects in free fall here;

https://brainly.com/question/14872097

which of the following cannot be increased by using a machine of some kind? work, force, speed, torque

Answers

Explanation:

Work cannot be increased by using a machine of some kind.

Work cannot be increased by using a machine of some kind.

A machine is any device in which the effort applied at one end overcomes a load at the other end.

Machines are generally used to perform different tasks faster.

However, a simple machine can not be used to increase the amount of work done at any time.

Force, speed and torque can all be increased using machines.

Learn more: https://brainly.com/question/15365822


The temperature of a body falls from 30°C to 20°C in 5 minutes. The air
temperature is 13°C. Find the temperature after a further 5 minutes.

Answers

Answer:

15.88°C I am not 100% sure this is right but I am 98% sure this IS right

A 15.0 g bullet traveling horizontally at 865 m>s passes through a tank containing 13.5 kg of water and emerges with a speed of 534 m>s. What is the maximum temperature increase that the water could have as a result of this event

Answers

Answer:

The rise in temperature is 0.06 K.

Explanation:

mass of bullet, m = 15 g

initial speed, u = 865 m/s

final speed, v = 534 m/s

mass of water, M = 13.5 kg

specific heat of water, c = 4200 J/kg K

The change in kinetic energy

[tex]K = 0.5 m(u^2 - v^2)\\\\K = 0.5\times 0.015\times (865^2-534^2)\\\\K = 3473 J[/tex]

According to the conservation of energy, the change in kinetic energy is used to heat the water.

K = m c T

where, T is the rise in temperature.

3473 = 13.5 x 4200 x T

T = 0.06 K

A student graphs power (p) on the vertical axis and time (t) on the horizontal axis. The graph appears to be a hyperbola.

a) What should the student graph on each axis to test whether the relationship is actually
hyperbolic?

b) If the relationship is actually hyperbolic, what is the general equation for the relationship between power and time?

Answers

Answer: it would be daddy

Explanation:

Because I’m daddy

The position of a particle is given by ~r(t) = (3.0 t2 ˆi + 5.0 ˆj j 6.0 t kˆ) m

Answers

Answer:

[tex]v=(6ti+6k)\ m/s[/tex]

Explanation:

Given that,

The position of a particle is given by :

[tex]r(t) = (3.0 t^2 i + 5.0j+ 6.0 tk) m[/tex]

Let us assume we need to find its velocity.

We know that,

[tex]v=\dfrac{dr}{dt}\\\\=\dfrac{d}{dt}(3.0 t^2 i + 5.0j+ 6.0 tk) \\\\=(6ti+6k)\ m/s[/tex]

So, the velocity of the particle is [tex](6ti+6k)\ m/s[/tex].

A car is driving towards an intersection when the light turns red. The brakes apply a constant force of 1,398 newtons to bring the car to a complete stop in 25 meters. If the weight of the car is 4,729 newtons, how fast was the car going initially

Answers

Answer:

the initial velocity of the car is 12.04 m/s

Explanation:

Given;

force applied by the break, f = 1,398 N

distance moved by the car before stopping, d = 25 m

weight of the car, W = 4,729 N

The mass of the car is calculated as;

W = mg

m = W/g

m = (4,729) / (9.81)

m = 482.06 kg

The deceleration of the car when the force was applied;

-F = ma

a = -F/m

a = -1,398 / 482.06

a = -2.9 m/s²

The initial velocity of the car is calculated as;

v² = u² + 2ad

where;

v is the final velocity of the car at the point it stops = 0

u is the initial velocity of the car before the break was applied

0 = u² + 2(-a)d

0 = u² - 2ad

u² = 2ad

u = √2ad

u = √(2 x 2.9 x 25)

u =√(145)

u = 12.04 m/s

Therefore, the initial velocity of the car is 12.04 m/s

The potential difference between the plates of a capacitor is 234 V. Midway between the plates, a proton and an electron are released. The electron is released from rest. The proton is projected perpendicularly toward the negative plate with an initial speed. The proton strikes the negative plate at the same instant the electron strikes the positive plate. Ignore the attraction between the two particles, and find the initial speed of the proton.
I have tried looking at the cramster.com solution manual and do not like the way it is explained. Simply put, I cannot follow what is going on and I am looking for someone who can explain it in plain man's terms and help me understand and get the correct answer. I am willing to give MAX karma points to anyone who can help me through this. Thank you kindly.

Answers

Answer:

The speed of proton is 2.1 x 10^5 m/s .

Explanation:

potential difference, V = 234 V

let the initial speed of the proton is v.

The kinetic energy of proton is

KE = q V

[tex]0.5 mv^2 = e V \\\\0.5\times 1.67\times 10^{-27} v^2 = 1.6\times 10^{-19} \times 234\\\\v=2.1\times 10^5 m/s[/tex]

Our system is a block attached to a horizontal spring on a frictionless table. The spring has a spring constant of 4.0 N/m and a rest length of 1.0 m, and the block has a mass of 0.25 kg.

Compute the PE when the spring is compressed by 0.50 m.

Answers

Answer

E - 1/2 K x^2      potential energy of compressed spring

E = 1/2 * 4 N / m * (.5 m)^2 = 2 * .5^2 N-m = .5 N-m

A regulation soccer field for international play is a rectangle with a length between 100 m and a width between 64 m and 75 m. What are the smallest and largest areas that the field could be?

Answers

Answer:

The smallest and largest areas could be 6400 m and 7500 m, respectively.

Explanation:

The area of a rectangle is given by:

[tex] A = l*w [/tex]

Where:

l: is the length = 100 m

w: is the width

We can calculate the smallest area with the lower value of the width.

[tex] A_{s} = 100 m*64 m = 6400 m^{2} [/tex]                            

And the largest area is:

[tex] A_{l} = 100 m*75 m = 7500 m^{2} [/tex]  

Therefore, the smallest and largest areas could be 6400 m and 7500 m, respectively.            

I hope it helps you!                        

Answer:

the largest areas that the field could be is [tex]A_l[/tex]=7587.75 m

the smallest areas that the field could be is [tex]A_s[/tex]=6318.25 m

Explanation:

to the find the largest and the smallest area of the field measurement error is to be considered.

we have to find the greatest possible error, since the measurement was made nearest whole mile, the greatest possible error is half of 1 mile and that is 0.5m.

therefore to find the largest possible area we add the error in the mix of the formular for finding the perimeter with the largest width as shown below:

[tex]A_l[/tex]= (L+0.5)(W+0.5)

(100+0.5)(75+0.5) = (100.5)(75.5) = 7587.75 m

To find the smallest length we will have to subtract instead of adding the error factor value of 0.5 as shown below:

[tex]A_s[/tex]= (L-0.5)(W-0.5)

(100-0.5)(64-0.5) = (99.5)(63.5) = 6318.25 m

a concave mirror has a radius of curvature of 60cm. How close to the mirror should an object be placed so that the rays travel parallel to each other after reflection

Answers

Answer:

Answer:30 cm

Answer:30 cmExplanation:

Answer:30 cmExplanation:Given=ROC= 60cm

Answer:30 cmExplanation:Given=ROC= 60cmObject be placed so that the rays that came from the object to them mirror are reflected from the mirror, and, then travel parallel to each other= 30cm at focus.

Other Questions
Plz help out will give brainliest Trey Morgan is an employee who is paid monthly. For the month of January of the current year, he earned a total of $4,538. The FICA tax for social security is 6.2% of the first $128,400 earned each calendar year, and the FICA tax rate for Medicare is 1.45% of all earnings for both the employee and the employer. The amount of federal income tax withheld from his earnings was $680.70. His net pay for the month is:_________A) $3,857.30B) $3,510.14C) $4,538.00D) $3,162.98E) $4,190.84 solve each question please thank you Rewrite the sentences according to the instructions given. 1. Hers is the most beautiful voice I have ever heard. (change into exclamatory) 2 Will you please tell me the truth? (change into advice) 3.It rains heavily in Cherrapunji. (add a question tag) 4. Help me complete this task. (request) 5. I will go to see her tomorrow. (negative) 6. Suman plays tennis. (yes/no question The air in poultry-processing plants often contains fungus spores. Inadequate ventilation can affect the health of the workers. The problem is most serious during the summer. To measure the presence of spores, air samples are pumped to an agar plate and "colony-forming units (CFUs)" are counted after an incubation period. Here are data from two locations in a plant that processes 37,000 turkeys per day, taken on four days in the summer. The units are CFUs per cubic meter of air. Day Day 2 Day 3 Day 4Kill room 3175 2526 1763 1090Processing 529 141 362 224The spore count is clearly higher in the kill room. Give sample means and a 99% confidence interval to estimate how much higher the spore count is in the kill room? I really need help on this. Whats the answer What is the purpose of a geological time scale ?It used to predict natural disaters throughout Earth's history.It is used to present the correct sequence of events in the Earth's history. It is used to determine the absolute dates in years for different periods.It used to create a naming system for flora and fauna. Both IFRS and U.S. GAAP allow deferred taxes to be: presented as noncurrent on the balance sheet. measured using a substantially enacted tax rate. recognized in equity after a fixed asset revaluation. What percent of Peruvians are Roman Catholic?60%79%53%22% The compound IF5 contains Question 16 options: polar covalent bonds with partial negative charges on the F atoms. ionic bonds. polar covalent bonds with partial negative charges on the I atoms. nonpolar covalent bonds. Contemporary developmentalists maintain that human development is a continual and hierarchical process. The statement that most accurately depicts this viewpoint is: A. early childhood experiences have little impact on adult behavior and attitudes B. early childhood experiences are the major determinants of adult behavior and attitudes C. early childhood experiences have a lasting impact on adult behavior and attitudes, but experience during other, later periods of life, also play a role D. negative childhood events affect adult personality and behavior, but positive childhood events have little impact Which statement describes the "Law of Conservation of Mass" for the following reaction?4 Fe + 302 -2 FeOSelect one:tiona.grams of Fe + grams of Fe2O3 = grams of O2O b. grams of O2 + grams of Fe2O3 = grams of FeO c. grams of Fe +grams of O2 = grams of Fe203O d. None of these.Name this ionic compound. Julio has a net pay of $ 537.00 each paycheck. He pays $ 142.00 in pre-tax deductions and taxes each paycheck. What is Julio's gross income before the tax deductions? the price of a box of cereal incresed by 45% if the original price of the box of cereal was 5$ what is the new price? which term was not an accurate new description for women in the 1920's?a. wage-earnerb. flapperc. politiciand. voter A researcher wishes to estimate the proportion of adults who have high-speed Internet access. What size sample should be obtained if she wishes the estimate to be within with % confidence if (a) she uses a previous estimate of ? (b) she does not use any prior estimates? PLEASE HELP!!! BEST ANSWER GETS BRAINLIEST!!For this assessment, you must demonstrate your understanding of conflict in Act III of Romeo and Juliet by identifying passages from the play that illustrate two different types of conflict.Select one of the following characters:JulietMercutioTybaltCapuletNurseOnce you have selected a character, look at the script for Act III. Find passages that you believe accurately portray the character's conflicts.Identify whether these conflicts are Man vs. Man, Man vs. Society, Man vs. Nature, or Man vs. Self. Explain your answer using proper spelling and grammar.(All I need is two conflicts for one character with an explanation. ) What are some of the advantages and disadvantages of connection-oriented WAN/Man as opposed to connection-less? find value of the variable SEKWhy did the artist of the above painting place all the figures in rows in the picture plane?