does space have plenty of oxygen
Answer:
I don't think so because we can't breathe in space
Explanation:
Answer:
No
Explanation:
There is no oxygen in space, so astronauts must bring tanks of oxygen
Which of the following is a homogenous mixture?
Answer:
Blood
Explanation:
Homogenous means the same type and a box with toys, spaghetti and meatballs, and trail mix all have variety.
Answer:
B is the correct answer
Determine What is the efficiency of a machine whose work output is 4 joules, and whose work input is 10 joules?
Answer:
The efficiency of the machine is 40 %.
Explanation:
We have,
Output work by the machine is 4 joules and the input work is 10 joules.
It is required to find the efficiency of a machine. The efficiency of a machine is given by the ratio of output work to the input work. It is given as :
[tex]\eta=\dfrac{4}{10}\times 100\\\\\eta=40\%[/tex]
So, the efficiency of the machine is 40 %.
3. Which of the following is an example of a
supplemental restraint system?
(a) air bag
(c) lap and shoulder belt
(b) safety belt
(d) antilock brakes
Answer:
A) air bag is your answer
Answer:
air bag
Explanation:
Any of several restraining systems in a vehicle, such as an airbag, in addition to the seatbelts.
What is the velocity of a wave that has a frequency of 400 Hz and a wavelength of 0.5 meters?
Answer:
4.2
Explanation:
The diagram shows the field lines near the poles, X and Y, of two magnets.
At left a rectangular box with the long horizontal side labeled X. At right a rectangular box with the long horizontal side labeled Y. There is a gap between the boxes. Curved lines with arrowheads emerge from the right end of X and the left end of Y and point up and down.
Based on the field lines, what are the poles of the magnets?
X: north
Y: south
X: south
Y: north
X: north
Y: north
X: south
Y: south
Answer: I think it is C
Explanation: sorry if it wrong
Answer:
C
Explanation:
got it right on edge
What does ROCAPV mean?
Answer: Rancho de Area Comunes PV
Explanation: it means
Rancho de Area Comunes PV
In an AC Monte Roca PV System Profile, where the following are depicted:
Location
Commissioning
Production
Operator
PV system power
Module
And communication.
How long will it take for 64 g of a radioactive material to be reduced to 2.0 g if the half-life is 0.5 hours?
Answer:
2.5 hours is the answer according to me
if 34.7 g of O2 reacts with iron to form 79.34 g of iron oxide, how much iron was used in the reaction?
A.
19.84 g
B.
44.64 g
C.
104.1 g
D.
114.04 g
Answer: B. 44.64 g
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
Mass of reactants = mass of iron + mass of oxygen = mass of iron + 34.7 g
Mass of product = mass of iron oxide = 79.34 g
As Mass of reactants = Mass of product
mass of iron + 34.7 g = 79.34 g
mass of iron = 44.64 g
Thus 44.64 g of iron was used in the reaction
A negative test charge experiences a force to the right as a result of an electric field. Which is the best conclusion to draw
based on this description?
The electric field points to the left because the force on a negative charge is opposite to the direction of the field,
The electric field points to the right because the force on a negative charge is in the same direction as the field,
No conclusion can be drawn because the sign of the charge creating the field is unknown,
No conclusion can be drawn because the amount of charge on the test charge is unknown.
Answer:a
Explanation:
Answer: ( A )
Explanation: the answer is a
_ is (are) the type of electromagnetic wave(s) with a wave length between 700 and 400 billionths of a meter.
Answer:
Visible Spectrum is the type of electromagnetic wave with a wave length between 700 and 400 billionths of a meter.
During which two phases would surfer’s most likely benefit
A. New and Full Moon
B. New moon and Waxing Crescent
C. Full Moon and Waxing Gibbous
D. 1st Quarter and 3rd Quarter
The phases where surfer’s most likely benefit include D. 1st Quarter and 3rd Quarter.
Surfers will benefit include during the 1st Quarter and 3rd Quarter because there's tidal change. Tidal change is when coastal areas experience two low and high tides.
The benefit of surfing during this period is that it helps jack the waves. Waves transmit energy and this is important to surfers.
Read related link on:
https://brainly.com/question/18253248
pls what is a friendly relationship
Answer:
A relationship where both members are freindly and supportive towards each other.
Explanation:
Brainliest?
Answer:
i do not know is your are talking about boyfriend and girlfriend relationship of you are talking about friendship i am just going to say both so for a friendship they do not have to like the same thing but if they do that is cool they have to be nice to each other and understand what one of them wants to do and they have to get along if they want to have a goof friendship so for boyfriend and girlfriend it is okay for them to fight and not understand each other they have to be friends so they can no what they like to do with each other then they can go on dates together
Explanation:
hope i help sorry very long
ASAP if you answer right I will mark brainiest
Answer:
I'm glad you asked!
Explanation:
1.Venus is the hottest planet in the solar system.
2.Opportunity explored Mars' surface.
3.Earth is the only planet in the solar system known to have plate Tectonics.
4.Mercury is one of the four planets closest to the Sun.
5.Mercury is the smallest of all planets in the solar system.
6.Messenger is a space aircraft that orbits and studies Mars.
7.Venus has the largest volcano in the solar system.
What is used in the name of ionic compounds containing a cation with multiple charges to indicate which charge?
(No answers to display)
Answer:
Roman Numerals?
Explanation:
Iron(II), would be iron 2+
iron(III), would be iron 3+
for example.
Which is true about density?
A. A possible unit for density is grams.
B. Liquid gold is denser than solid gold.
C. Density is found by multiplying mass
and volume.
D. Density is independent of the
amount of the sample.
Answer:
Density is independent of the
amount of the sample. (D)
Explanation:
Because density is an intrinsic property of matter.
hope it helps!
Answer:
D. Density is independent of the
amount of the sample.
Explanation:
Density is expressed in units of mass per volume, such as g/mL or kg/m3. Because the density of a substance does not depend on the amount of substance present, density is an “intensive property”. To measure the density of a sample of material, both the mass and volume of the sample must be determined.
Hope this Helps, Pls mark as the Brainliest
Which electromagnetic radiation can be seen with the human eye?
ultraviolet rays and visible light
infrared rays, visible light, and ultraviolet rays
visible light
visible light and X-rays
Answer:
Visible light
Explanation:
Answer:
C visible light
Explanation:
Answer fast, please.
Which term is defined as the force applied to the object divided by the mass of the object?
speed
velocity
mass
acceleration
Answer:
acceleration
Explanation:
From the question: "FORCE... divided by the MASS..." is translated to a math equation as "F / m", where "F" is the force and "m" is the mass.
Now, the second Newton's law says "F = m . a ", where a is acceleration.
If you move m to the left side, clearly you have "F / m", and "a" is alone to the right. Math equation:
a = F / m
acceleration = force / mass
A Physics question regarding circuits and electricity.
what is mass times acceleration?
Answer:
Force
Explanation:
The mass of an object is the quantity of matter it contains. It is measured in kilograms.
Acceleration is the ratio of the change in the velocity of an object to the change in time. It is measured in m/[tex]s^{2}[/tex].
When the mass of an object is multiplied with its acceleration, this gives the average force applied on the object. As force is defined as agent that can change the state of an object.
i.e F = m × a
where F is the force, m is the mass of the object and a its acceleration.
The two major classes of force are; contact force and field force.
Plz help! Will give brainiest!
For the girl to lift this rock, she must push her end down _____ to raise the rock _____.
A. a lot; a little
B. a little; a lot
C. a little; a little
Answer:
A is the correct answer
Explanation:
mark brainliest please
When a current flows through a light bulb, it emits 30 J light energy in 2 seconds, What is the power of the bulb?
The power of the light bulb is 15 watts.
What is power ?Power in physics is defined as the rate of energy per unit time or in other words the work done by any electrical appliance per unit time. Power is expressed as -
P = E/T where E is Energy and T is the time period.
How to calculate the value of power in the question ?Given that the light bulb emits 30 J light energy in 2 seconds.
We have E = 30J and T = 2 seconds.
Therefore power(P) = Energy(E) / Time(T)
∴ P = 30 / 2 = 15 watts
Thus the power of the light bulb is 15 watts.
To learn more about power in physics, refer -
https://brainly.com/question/11569624
#SPJ2
Are you willing to do a project?
Answer:yes
Explanation: what project
A pendulum reaches a height of 0.3 m at the top of its swing. If the
bob has a mass of 5 kg, what is the potential energy at the top of its
swing?
Select one:
14.7)
7.35 J
0.45 J
1.5 J
Answer: A
Potential energy = 14.7 J
Explanation:
Given that the
Mass M = 5 kg
Height h = 0.3 m
Let us take acceleration due to gravity g = 9.81 m/s^2
Potential energy = mgh
Substitute all the parameters into the formula above
P.E = 5 × 9.81 × 0.3
P.E = 14.715 J
P.E = 14.7 J approximately
The correct option is therefore A
What is the kinetic energy of a bicylcle with a mass of 15 kg traveling at a velocity of 3 m/s?
KE = 0.5 x mv^2
Kinetic energy equals 1/2 times mass times velocity squared.
Mass = 15kg
Velocity = 3m/s
Plug it into the formula.
KE = 0.5 x 15(3^2)
KE = 0.5 x 15(9)
Multiply the mass and velocity squared.
KE = 0.5 x 135
Then, multiply the result by 1/2 or 0.5
KE = 67.5
The kinetic energy of a bicycle that has a mass of 15kg and travels at 3m/s is 67.5J.
Answer:
67.5 J
Explanation:
Kinetic energy can be found using the following formula.
[tex]KE=\frac{1}{2}mv^2[/tex]
where m is the mass in kilograms and v is the velocity in m/s.
We know the bike has a mass of 15 kilograms. We also know the velocity is 3 m/s. Therefore, we can substitute 15 for m and 3 for v
[tex]KE=\frac{1}{2}*15*3^2[/tex]
Evaluate the exponent first. 3^2 is the same as 3*3, which is equal to 9.
[tex]KE=\frac{1}{2} *15*9[/tex]
Multiply 15 and 9.
[tex]KE=\frac{1}{2} *135[/tex]
Multiply 1/2 and 135
[tex]KE=67.5[/tex]
Add appropriate units. Kinetic energy uses Joules or J as the units.
[tex]KE= 67.5 Joules[/tex]
The kinetic energy of the bike is 67.5 Joules
Science Will give brainless and 22 points
Answer:
Mercury 0.39 AU, 36 million miles
57.9 million km
Venus 0.723 AU
67.2 million miles
108.2 million km
Earth 1 AU
93 million miles
149.6 million km
Mars 1.524 AU
141.6 million miles
227.9 million km
Jupiter 5.203 AU
483.6 million miles
778.3 million km
Saturn 9.539 AU
886.7 million miles
1,427.0 million km
Uranus 19.18 AU
1,784.0 million miles
2,871.0 million km
Neptune 30.06 AU
2,794.4 million miles
4,497.1 million km
Pluto (a dwarf planet) 39.53 AU
3,674.5 million miles
5,913 million km
Answer:
Mercury 0.39 AU, 36 million miles 57.9 million km
Venus 0.723 AU 67.2 million miles 108.2 million km
Earth 1 AU 93 million miles 149.6 million km
Mars 1.524 AU 141.6 million miles 227.9 million km
Jupiter 5.203 AU 483.6 million miles 778.3 million km
Saturn 9.539 AU 886.7 million miles 1,427.0 million km
Uranus 19.18 AU 1,784.0 million miles 2,871.0 million km
Neptune 30.06 AU 2,794.4 million miles 4,497.1 million km
Pluto (a dwarf planet) 39.53 AU 3,674.5 million miles 5,913 million km
Explanation:
This graph provides data on the amount of water needed to grow four different crops, each used to produce ethanol, a fuel. For each crop, the data shows how many liters of water are needed to produce one liter of ethanol fuel. Which of the following would require using the most water? *
Producing 100 L of ethanol from sugar cane
Producing 200 L of ethanol from sugar beet
Producing 300 L of ethanol from potatoes
Producing 400 L of ethanol from corn
Answer:
Producing 300 L of ethanol from potatoes
Explanation:
From the diagram, one liter of ethanol production from sugar cane requires 2000 liters of water. Hence, in order to produce 100 L of ethanol from sugar cane, 2000 x 100 = 200,000 L of water.
1000 liters of water is needed to produce 1 liter of ethanol from sugar beet. Hence, 200 x 1000 = 200,000 L of water will be needed to produce 200 liters of ethanol.
1000 liters of water is also required to produce 1 liter of ethanol from potatoes, hence, 300 x 1000 = 300,000 L of water would be required to produce 300 L of ethanol from the same material
About 500 liters of water is required to produce 1 liter of ethanol from corn, hence, 400 x 500 = 200,000 L of water would be needed to produce 400 L of ethanol from corn.
In conclusion, producing 300 L of ethanol from potatoes would require using the most water among all the options.
Which are descriptions of gravity on Earth? Check all that apply.
an attractive force
a repulsive force
a noncontact force
a contact force
a horizontal force
a vertical force
Answer:
an attractive force
a noncontact force
a vertical force
Explanation:
Gravitational force is a NON-CONTACT FORCE. Gravitational force acts on all bodies on the earth that have mass. The force which is exerted through weight acts on the center of gravity of the body. The force is directed towards the center of the earth. The weight of a body is the gravitational force exerted by the earth on the body.
A,C,F.
Explanation: Got it correct.
