Answer:
C. the energy used to hold the nucleus together
El hipoclorito de sodio (NaClO), es vendido en una solución clara de ligero color verde-amarillento y un olor característico que se conoce con el nombre genérico Límpido, con una concentración del 6%. Pero para la desinfección de superficies el Límpido, debe ser diluido al 0,5%. Cuánto Límpido debemos sacar del recipiente para obtener 200 ml de una solución al 0,5%.
Respuesta:
16,7 mL
Explicación:
Paso 1: Información provista
Concentración inicial (C₁): 6%Volumen inicial (V₁): ?Concentración final (C₂): 0,5%Volumen final (V₂): 200 mLPaso 2: Calcular el volumen de la solución concentrada
Queremos preparar una solución diluida de hipoclorito de sodio a partir de una concentrada. Podemos calcular el volumen inicial que debemos tomar usando la regla de dilución.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 0,5% × 200 mL / 6% = 16,7 mL
A chemist determines by measurements that 0.0550 moles of nitrogen gas participate in a chemical reaction. Calculate the mass of nitrogen gas that participates.
Be sure your answer has the correct number of significant digits.
The mass of nitrogen gas that participated in the chemical reaction is 1.54g
HOW TO CALCULATE MASS OF AN ELEMENT:
Mass of a substance can be calculated by multiplying the number of moles in mol of the substance by its molecular mass in g/mol. That is;mass (M) = molar mass (MM) × number of moles (n)According to this question, a chemist determines by measurements that 0.0550 moles of nitrogen gas (N2) participate in a chemical reaction.
The molecular mass of nitrogen gas (N2) = 14.01(2)= 28.02g/mol
Hence, the mass of the nitrogen gas that participated in the chemical reaction is calculated as follows:
Mass (g) = 0.0550 mol × 28.02 g/molMass = 1.5411Therefore, the mass of nitrogen gas that participated in the chemical reaction is 1.54g
Learn more: https://brainly.com/question/18269198
what is the reactant(s) in the chemical equation below
3CO(g) + Fe2O3(s) 2Fe(s) + 3CO2(g)
Answer:
the reactants are carbon dioxide ,iron, oxygen
in h-atom if x is radius of first bohrs orbit de broglie wavelength of an atom in 3rd orbit is a.3πx b.6πx c.9x/2 d.x/2
please I need complete explanation fast
Answer:
can you type question properly.
What is the AHsol for LiF → Lit + F-? The lattice energy is -1,036 kJ/
mol, the enthalpy of hydration for Lit is -499
kJ/mol, and the enthalpy of hydration for F-is-431 kJ/mol. Use A Hooi = -A Hat + AHhydr.
0-968 kJ/mol
-106 kJ/mol
106 kJ/mol
1,966 kJ/
mol
The heat of hydration is defined as the heat absorbed or evolved when one mole of a substance undergoes hydration. The heat of solution is the enthalpy change associated with he dissolution of a solute. The lattice energy is the heat. Lattice energy is the energy released when the components of the lattice are brought together from infinity.
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
Given that;
Heat of hydration = ΔH solution – ΔH lattice energy
Where,
ΔH solution = Heat of the solution
ΔH lattice energy = Lattice energy of the solution
The heat of solution or enthalpy of dissolution is defined as the enthalpy change associated with the dissolution of a solute in a solvent
From the formula above;
ΔH solution = Heat of hydration + ΔH lattice energy
Heat of hydration = [(-431) + (-499)] = -930 kJ/mol
ΔH solution = (-930) + (-1,036) = -1966 kJ/mol
Hence the heat of solution for LiF → Li^+ + F- is -1966 kJ/mol
https://brainly.com/question/13526282
A compound was found to contain 90.6% lead (Pb) and 9.4% oxygen. What is the empirical formula for this compound?
Answer:
the answer is 47.9 and ik because I just had that question
The empirical formula of the compound is O₄Pb₃.
What is the empirical formula?
An Empirical system is the chemical system of a compound that offers the proportions of the elements gifted within the compound however not the real numbers or arrangement of atoms. This would be the lowest complete variety ratio of the elements within the compound.
Amount of lead (Pb) = 90.6%
⇒and amount of oxygen = 9.4%
taking the whole number ratio
o = 4
Pb = 3
∴ ⇒O: Pb=4:3
O4Pb3 answer.
Learn more about empirical formula here:-https://brainly.com/question/1603500
#SPJ2
What exactly is a proton? Is it a member of the periodic table?
The atomic number is the number of protons in the nucleus of an atom. The number of protons define the identity of an element (i.e., an element with 6 protons is a carbon atom, no matter how many neutrons may be present).
At the beginning of the reaction: N2 + 3H2 -> 2NH there is 1 mol of N. and 3 moles of H, and at the end of it is present a mixture formed by 2.5 moles in total, what is the performance for the reaction?
5.- Al comenzar la reacción: N2+ 3H2 -> 2NH existe 1 mol de N. y 3 moles de H, y al finalizarla está presente una mezcla formada por 2,5 moles en total, ¿cuál es el rendimiento para la reacción?
Answer:
75%
Explanation:
call realistic moles of N2 in the reaction is a
moles of H2 :3a
moles of NH3: 2a
the moles of residual N2 after reaction: 1-a
the moles of residual H2 after react: 3- 3a
the moles of mixture: 2a+1-a+3-3a=2.5
-> a=0.75
H=0.75/1=75%
can you solve question 5 and 6 only
Answer:
oil floats on water because it is heavier than water
Salt is no longer visible after stirring as salt dissolves in water
by filtration
How many grams of liquid water are produced when 60 grams of ice melt?
Answer: 60 Grams of water are produced, because you can't get more than the amount that was in the original ice cube
Explanation:
water and development are substitute of one another.
explanation with it, please
full form of soil pH
Answer:
PH STANDS FOR POTENTIAL OF HYDROGEN .
It represents the ratio of Hydronium ions (H3O) to Hydroxide ions (OH). It is a measure of acidity and alkalinity of a solution.
FOLLOW METhe reactivity of elements can be predicted based on the position of an element in the periodic table. Based on the periodic table, which of the following elements would be expected to be the most reactive?
Iodine (I)
Iodine (I)
Chlorine (Cl)
Chlorine (Cl)
Fluorine (F)
Fluorine (F)
Bromine (Br)
Answer:
Chlorine (Cl) is most reactive out the the listed elements.
Answer:
iodine
Explanation:
It is the most reactive on the periodic table.
Which of the following is NOT a physical property?
Viscosity
Reactivity
Malleability
Density
Answer:
reactivity is NOT a physical property
hii pls help me to balance the equation and state the symbols thanksss
Answer:
I hope that the link above will be helpful
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
[tex]\boxed{\pmb{\green{\sf{2Mg +H_{2}SO_{4}\dashrightarrow H _{2}+Mg_{2}SO_{4}}}}}[/tex]
▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓▓
Unknown # 29
Flame Test Color: Green
Addition of HCl(aq): Bubbles
Addition of HCl(aq) and BaCl2(aq): NR (No Reaction)
Addition of HNO3(aq) and AgNO3(aq): White precipitate
What is the unknown ionic compound molecular formula?
Answer:
I think it's a sulphate ion, because when you add hydrochloric acid to it it produces bubbles and when you add barium chloride it then produces a white precipitate.its formula is SO4
I hope this helps
what is the gram formula of na2co3
Answer:
106 gfm
Explanation:
element. number masses
Na. 2 23×2
C. 1. 12
O. 3. 16×3
then add
106 gfm
9. During an experiment the students prepared three mixtures A)Starch in water B) Sodium chloride solution C) Tincture of Iodine. i) Students observed a visible beam of light through mixture A. Why? ii) Tincture of lodTe did not show Tyndall effect. Explain reason. ill) How can you relate particle size to Tyndall effect?
Answer:
See explanation
Explanation:
Tyndall effect refers to the scattering of light in a solution. Tyndall effect occurs when the size of particles in the solution exceeds 1 nm in diameter. Such solutions are actually called false solutions.
In tincture of iodine, the size of particles in solution is less than 1 nm in diameter hence the solution does not exhibit Tyndall effect. Hence, tincture of iodine is a true solution.
Therefore, if the size of particles in solution exceeded 1nm in diameter, Tyndall effect is observed.
2(3a-3)-2(a-2)=3
thank you
Answer:
6a - 6 - 2a + 4 = 3
4a - 2 = 3
4a = 3 + 2
4a = 5
a = 5/4
hope that helps ✌
1. Mg + HCl … + ….
2. NaOH + HNO3 … + ….
3. KOH + CuCl2 … + ….
4. Na2SO4 + BaCl2 … + ….
5. HCl + FeO à … + …
Explanation:
The answer is mentioned above.
Hope it helps.
Give the relation of energy (E) and frequency (v) as given by Planck. Calculate the frequency and energy of a photon of radiation having wavelength 3000°A.
Pls answer correctly,need it urgently...
Solution:-1
[tex]\\ \sf\longmapsto E=hv[/tex]
E denotes to Energy h denotes to planks constantv denotes to frequency.Solution:-2
Wavelength=3000Å[tex]\boxed{\sf \lambda=\dfrac{c}{v}}[/tex]
[tex]\\ \sf\longmapsto v=\dfrac{c}{\lambda}[/tex]
[tex]\\ \sf\longmapsto v=\dfrac{3\times 10^8m/s}{3000\times 10^{-10}m}[/tex]
[tex]\\ \sf\longmapsto v=0.001\times 10^{18}s^{-1}[/tex]
[tex]\\ \sf\longmapsto v=1.0\times 10^{15}s^{-1}[/tex]
Now
[tex]\\ \sf\longmapsto E=hv[/tex]
[tex]\\ \sf\longmapsto E=6.626\times 10^{-34}Js\times 1.0\times 10^{15}s^{-1}[/tex]
[tex]\\ \sf\longmapsto E=6.6\times 10^{-19}J[/tex]
A scientist wants to know: "If salt is added to water, would the
solution still boil at the same temperature?"
torcses
Answer:
no, the sollution will boil at a higher temperature because the density of the sollution will increase when salt is added to it
5+64
this is TOTALLY SOOOO hard so help me
^thats what she said
Answer:
69
Explanation:
I thought that I answer is correct
Answer:
The answer is 69
Explanation:
Because if you add one its 66, and so on, hope this helps! but if you add five it will be 69, if you need help with easy equations let me know
which energy is found in the nucleus of an atom?
Answer:
Nuclear energy.
Explanation:
It's the energy that holds protons and neutrons ( nucleons ) together, hence holds the nucleus as one.
I need help!!!! please
6.94 is much more closet to 7.016, so Li 7 is more abundant
A piece of sodium metal can be described as?
I forgot to add the answers i had to my question (While a balloon is being filled, if the temperature of the air in the balloon increases, what happens to it’s volume)
A) It stays the same
B) It deflates
C) It decreases
D) It increases
The correct answer is D ... and if the answer was added to the word "explode" .. it would have been more correct .
what is the material used to make plaster of paris?
Answer:
gypsum
Explanation:
gypsum is used to make plaster of Paris
Answer:
Simple squamous epithelium
This type of epithelia lines the inner surface of all blood vessels (endothelium), forms the wall of alveolar sacs in the lung and lines the body cavities (mesothelium). The primary function of simple squamous epithelia is to facilitate diffusion of gases and small molecules.
Explanation:
isme talk kro
during the electrolysis of cryolite ,aluminium and fluorine are formed in.......molar ratio
[tex]{\huge{\boxed{\sf{\pink{☛Answer࿐}}}}}[/tex]
From the first mechanism, it can be seen that the Aluminum is reduced at cathode and Florine is oxidized at anode.The ratio of aluminium and fluorine is the ratio of their change in oxidation number, i.e. 2:3༒HOPE SO IT HELPS YOU༒
༒MARK ME AS BRAINLIEST༒
what do y’all do when y’all brainly says “locked” and won’t show anymore answers !???
Answer:
Create a new account as the thing you're experiencing now is due to the fact that Brainly had blocked your account.
