Answer:
Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.
The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.
Explanation:
The cell membrane around a cell forms a barrier that protects and regulates the cell. Certain chemicals can pass through the plasma membrane because they have similar chemical properties as the membrane.
Which best describes those that can pass through?
They are concentrated.
They are soluble.
They are diluted.
They are heated.
Answer:
it is b (they are soluble)
Explanation:
got it right on edg and on quizlet
Answer:
B. They are soluble
Explanation:
What is the total number of moles of oxygen atoms present in one mole of Mg(CIO3)2?
1. 5
2. 2
3. 3
4. 6
Answer:
Of oxygen would be 6 moles (4).
Explanation:
Since it is in a bracket you have to multiply 3 and tge 2 to get 6 oxygens.
The noble-gas notation for the element indium, (In, atomic #49) is:
A.
?
[Kr]5p?
B.
?
[KrJ5524d105p
C.
?
[Kr]5s25d 105p1
D. ?
[Kr]5524f1450 105p1
Answer:[tex][Kr]4d^{10}5s^25p^1[/tex]
Explanation:
The element Indium with atomic number 49 will have 49 protons and 49 electrons in it.
Electronic configuration represents the total number of electrons that a neutral element contains. We add all the superscripts to know the number of electrons in an atom. The electrons are filled according to Afbau's rule in order of increasing energies and the nearest noble gas is Krypton with 36 electrons.
The electronic configuration in terms of noble gas configuration is:
[tex]In:49:[Kr]4d^{10}5s^25p^1[/tex]
The noble-gas notation for the element indium is [Kr} 4d¹⁰5s²5p¹. The correct option is B. [Kr] 5s2 4d10 5p1
From the question,
We are to write the electron configuration of the element Indium, using the appropriate noble gas notation.
The noble gas that comes before Indium (In) is Krypton (Kr). Therefore, the noble gas that will be used in the notation is Krypton.
Indium has an atomic number of 49 while Krypton has an atomic number of 36. This means we will fill in 13 more electrons.
The electron configuration for the element indium using the noble-gas notation is
[Kr} 4d¹⁰5s²5p¹
Hence, the noble-gas notation for the element indium is [Kr} 4d¹⁰5s²5p¹. The correct option is B. [Kr] 5s2 4d10 5p1
Learn more here: https://brainly.com/question/4194872
Which of the following observations would be the expected indication that a reaction has taken place when a solution of cesium sulfate is mixed with strontium perchlorate.
Bubbling
Formation of percipitate
Formation of soluble salts
Formation of a gas
Answer:
Formation of precipitate
Formation of soluble salts
Explanation:
Let's consider the molecular equation that takes place when an aqueous solution of cesium sulfate is mixed with an aqueous solution strontium perchlorate.
Cs₂SO₄(aq) + Sr(ClO₄)₂(aq) ⇒ 2 CsClO₄(aq) + SrSO₄(s)
According to the solubility rules:
CsClO₄ is a soluble salt.SrSO₄ is an insoluble salt that precipitates as a solid.For a double displacement reaction to occur, at least one of the products must be insoluble or volatile.
Answer:
It's b) Formation of a precipitate
Explanation:
I took the quiz and got it right.
How many H atoms in Mg(OH)2
Answer:
Explanation:
There are 2.
What is an nucleus ?
Nucleus is present at the centre of atom. It contains protons and neutrons. It is very small as compared to the atom.
Answer:
It is a part of a cell which controls all the activities in the cells and contains the genetic information of the cell that is to be passed down to the next cell when it reproduces.
Explanation:
It is a part of a cell which controls all the activities in the cells and contains the genetic information of the cell that is to be passed down to the next cell when it reproduces.
Fe + CuCl2 → FeCl2 + Cu
The type of reaction represented by the above equation is -
decomposition
synthesis
single-replacement
double-replacement
Answer:
the type is single replacement
The given reaction equation represents a single-replacement reaction.
Explanation:
A chemical reaction is defined as the rearrangement of the atoms of a substance to give a new substance as a product.A decomposition reaction is a type of chemical reaction in which a substance breakdowns into two or more than two simpler substances.ABC→ A+B+C
A synthesis reaction is a chemical reaction in which two or more compounds are combined together to form a single compound.A+B+C → ABC
A single-replacement reaction is defined as the chemical reaction in which an element replaces another element from its compound.AB+ C → AC + B
A double-replacement reaction is defined as the chemical reaction in which ions of compounds are exchanged.AB+ CD → AC + BD
Given:
[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]
To find:
The type of chemical reaction represented by the given equation.
Solution:
In the given reaction:
[tex]Fe + CuCl_2 \rightarrow FeCl_2 + Cu[/tex]
Iron is replacing copper from its compound which is copper(II) chloride to give iron(II) chloride and copper as a product.
So from this, we can conclude that the given reaction equation represents a single-replacement reaction.
Learn more about types of chemical reactions here:
brainly.com/question/1071297?referrer=searchResults
brainly.com/question/12844777?referrer=searchResults
A 10 gram sample of iron reacts with oxygen to form 18.2 grams of ferric oxide. How many grams of oxygen reacted?
Answer:
[tex]\boxed {\boxed {\sf 8.2 \ grams}}[/tex]
Explanation:
According to the Law of Conservation of Mass, the mass of the products must equal the mass of the reactants.
mass products = mass reactantsIn this problem, the reaction is:
[tex]iron + oxygen = ferric \ oxygen[/tex]
The reactants are iron and oxygen. We know the mass of the iron sample is 10 grams. The product is ferric oxide. The mass of the ferric oxide sample is 18.2 grams.[tex]10 \ g + oxygen=18.2 \ g[/tex]
We want to find how many grams of oxygen reacted. We have to get the oxygen by itself. 10 is being added to oxygen. The inverse of addition is subtraction. Subtract 10 from both sides of the equation.
[tex]10 \ g - 10 \ g+ oxygen = 18.2 \ g - 10 \ g[/tex]
[tex]oxygen= 18.2 \ g - 10 \ g[/tex]
[tex]oxygen= 8.2 \ g \\[/tex]
8.2 grams of oxygen reacted with 10 grams of iron to form 18.2 grams of ferric oxide.
what are 4 sources of electrical energy?
Answer:
Clean Energy. Learn more about energy from solar, wind, water, geothermal, biomass and nuclear. Fossil. Learn more about our fossil energy sources: coal, oil and natural gas.Electric Power. Learn more about how we use electricity as an energy source. Energy Storage. Hydrogen & Fuel Cells.Explanation:
I hope this helps xD
Answer:
Electrical energy is used to power up a light bulb. The current moves from the outlet to the light bulb through the wire.
Lightning is another example of electrical energy. The negatively charged particles are separated from the positively...
Batteries are also sources of electrical energy. In car batteries, the moving charges Explanation:
fI gave u 3 think of the 4th one
What reaction shows a compound breaking apart into separate substances?
A. A single-replacement reaction
B. A synthesis reaction
C. A double-replacement reaction
D. A decomposition reaction
Answer: The answer is decomposition reaction
Explanation: Hope this helps:)
Answer: D. decomposition reaction
Explanation:
What mass of sodium hydroxide will neutralize completely 3.612 moles of HCl?
Answer:
NaOH + HCl = NaCl + H2O
(3.612 moles of HCl) x (1/1) x (39.9971 g/mol) = 144.5 grams
So answer B.
Explanation:
NaOH + HCl = NaCl + H2O
(3.612 moles of HCl) x (1/1) x (39.9971 g/mol) = 144.5 grams
To solve such this we must know the concept of double displacement reaction. Therefore, 144.48g sodium hydroxide will neutralize completely 3.612 moles of HCl.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved. There are so many types of chemical reaction reaction like combination reaction, double displacement reaction.
The balanced reaction is
NaOH + HCl = NaCl + H2O
To neutralize completely 3.612 moles of HCl, 3.612 moles of NaOH is required.
mass of NaOH =Mole× Molar mass of NaOH
mass of NaOH=3.612× 40 g/mol
mass of NaOH=144.48g
Therefore, 144.48g sodium hydroxide will neutralize completely 3.612 moles of HCl.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ2
After food is consumed, chemical nutrients are absorbed into the blood. The blood then carries these nutrients to the body's cells where the nutrients enter mitochondria. Which reaction must occur next for the cell to carry on other activities?\
Answer:c. oxygen,light,and glucose combine to produce high energy molecules
Explanation:
Which is a component of John Dalton’s atomic theory?
The ratio of atoms in a compound is fixed.
The atoms of different elements are the same.
An atom is a small particle of matter that can be broken down.
A reaction can create or destroy atoms as well as rearrange them.
Answer:
i think the answer is b
Explanation:
In the reaction of aluminum with iron III oxide, if you start with 54.2 grams of aluminum, how many grams of iron III oxide are needed for the reaction to occur?
Answer:
[tex]m_{Fe_2O_3}=160.41gFe_2O_3[/tex]
Explanation:
Hello!
In this case, since the reaction between aluminum and iron (III) oxide is:
[tex]2Al+Fe_2O_3\rightarrow Al_2O_3+2Fe[/tex]
In such way, since there is 2:1 mole ratio between aluminum (atomic mass = 26.98 g/mol) and iron (III) oxide (molar mass = 159.70 g/mol), we'll be able to compute the mass of the required reactant as shown below:
[tex]m_{Fe_2O_3}=54.2gAl*\frac{1molAl}{26.98gAl}* \frac{1molFe_2O_3}{2molAl}*\frac{159.70gFe_2O_3}{1molFe_2O_3}\\\\m_{Fe_2O_3}=160.41gFe_2O_3[/tex]
Best regards!
is francium found in nature or lab?
Answer:
It was the last element first discovered in nature, rather than by synthesis. Outside the laboratory, francium is extremely rare, with trace amounts found in uranium and thorium ores, where the isotope francium-223 continually forms and decays
which formula represents a nonpolar molecule containing polar covelant bond
Answer: H2O and NH3 are polar molecules. H2 is a nonpolar molecule but the H-H bond is also nonpolar.
Therefore, the best choice is CCl4. Although the C-Cl bond is polar due to electronegativity differences, the molecule itself is nonpolar because the net dipole moments cancel out, given its tetrahedral molecular structure.
Explanation:
What is the mass of 1.00 mol of oxygen (O2)?
Answer:
Mass = 32 g
Explanation:
Given data:
Number of moles of oxygen = 1.0 mol
Mass of oxygen = ?
Solution:
Formula:
Number of moles = mass/molar mass
Molar mass of oxygen (O₂) is 32 g/mol
by putting values,
1.0 mol = mass/ 32 g/mol
Mass = 1.0 mol ×32 g/mol
Mass = 32 g
Adaleigh is learning about renewable and non-renewable resources in her science class. She decides to take
a nature walk and makes notes of all the renewable resources that she sees. Which of the following is an
observation that Adaleigh could have made on her walk?
A. The seeds on the ground are going to grow into new trees.
B. The tallest trees had the most seeds around their bases.
C. When trees decay, they could eventually turn into coal.
D. Pine trees are older than oak trees.
Answer:
A. The seeds on the ground are going to grow into new trees.
Explanation:
Trees are renewable resources.
Calculate the amount of heat, in Joules, needed to raise 34.0g of water from 55.0°C to 76.0*C. The specific heat of water is 4.18 J/gºC.
Answer:
2984.52J
Explanation:
Using the formula: Q = m × c × ∆T
Where;
Q = amount of heat (in Joules)
m = mass (in grams)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
Based on the information provided in the question;
m = 34.0g
c = 4.18 J/gºC.
Initial temperature = 55.0°C
Final temperature = 76.0°C
Hence, Q = m × c × ∆T
Q = 34 × 4.18 × (76 - 55)
Q = 142.12 × 21
Q = 2984.52J
Therefore, 2984.52J is the amount of heat, in Joules, needed to raise 34.0g of the water.
Based on periodic trends which atom has a larger ionization energy then calcium Ca?
Answer:
Gallium, Germanium, Arsenic, Selenium, Bromine and Krypton
Explanation:
Based on periodic trends, the atom that has a larger ionization energy than calcium are Gallium, Germanium, Arsenic, Selenium, Bromine and Krypton.
Across the period, the ionization energy increases from left to right.
Ionization energy is the energy required to remove the most loosely held electron within an atom. As you go from left to right, the ionization energy increases rapidly.The elements to the right of Ca will have a higher ionization energy compared to Ca.How many moles of aluminum are equivalent to 4.816 × 1024 atoms?
A.12.5
B.8
C.1.25
D.08
Answer:
6.591
Explanation:
= 6.951 moles
Answer: 8
Explanation:
NEED HELP ASAP!!
(04.04 LC)
Which statement is true about the products of cellular respiration?
They contain oxygen.
They contain glucose.
They become the products of photosynthesis.
They become the reactants of photosynthesis.
Answer:
They contain oxygen
hope it helps
How much more pressure does a 250 lb person exert on the ground than a 120 lb person if they are both standing on one foot with area 16 in2?
Answer:
57.124.18 Pascals
Explanation:
The pressure that each person exerts on the ground is given by:
Pressure = force/area
The force that each person exert is given by:
Force = mass (kg) x acceleration due to gravity (10 m/s2)
1 lb = 0.4536 kg, hence;
250 lb person = 113.398 kg
120 lb person = 54.431 kg
Force exerted by the 250 lb person = 113.398 x 10 = 1133.98 kg/m2
Force exerted by 120 lb person = 54.431 x 10 = 544.31 kg/m2
16 inch2 = 0.0103226 m2
Pressure exterted by 250 lb person = 1133.98/0.0103226
= 109,854.11 pascals
Pressure exerted by 120 lb person = 544.31/0.0103226
= 52,729.93 Pascals
Difference in pressure = 109,854.11 - 52,729.93
= 57,124.18 Pascals
Hence, a 250 lb person will exert 57.124.18 Pascals pressure more than a person of 120 lb on a foot with a 16 inch2 area.
what coefficients used to balance chemical equation below? ___ Ag2O ----> ____ Ag + ___ O2
A 2,4,1
B 2,2,2
C 2,1,2
D 1,1,1
The coefficients used to balance the chemical equation given in the question are 2, 4, 1 (Option A)
What is a chemical equation?Chemical equations are representations of chemical reactions using symbols and formula of the reactants and products.
The reactants are located on the left side while the products are located on the right side.
Reactants —> Products
The balancing of chemical equations follows the law of conservation of matter which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to another.
How to balance the equationAg₂O —> Ag + O₂
There are 2 atoms of O on the right side 1 on the left. It can be balance by writing 2 before Ag₂O as shown below
2Ag₂O —> Ag + O₂
There are 4 atoms of Ag on the left side and 1 atom on the right side. It can be balance by writing 4 before Ag as shown below
2Ag₂O —> 4Ag + O₂
Now, the equation is balanced.
Thus, the coefficients are: 2, 4, 1
Learn more about chemical equation:
https://brainly.com/question/7181548
#SPJ2
which description of salt is a chemical property?
1. white cube crystals
2.odorless
3.product of mixing acids and bases
4. solid does not conduct electricity
Pls answer quickly
How can the image be described? Check all that apply.
smaller than the object
real
right-side up
larger than the object
upside down
virtual
Answer:
Smaller than the object
Real
Upside down
Explanation:
The image formed by a convex lens will always be real and smaller. The image formed is smaller than the object, real ,upside down and right side up. Hence, options 1,2,3 and 5 are correct.
What is convex lens?Convex lens is a type of lens, in which one at least one side is curved outside. These lenses have the ability to focus an outside light beam to a spot on the opposite side by converging it.
The focal length of the convex lens is the distance from the lens's center to this point, which is known as the focus. On the other hand, a plano-convex lens has one surface that is flat and the other that is convex.
Convex lenses cause light from an item to bend, creating an upright, smaller, and inverted picture of the original object. As a result, the candle in this instance will be smaller, upside down, and actual.
Find more on convex lens:
https://brainly.com/question/1604692
#SPJ6
Which balance equation represents a single replacement reaction
Answer: A single replacement reaction looks sort of like this
A + BC —> AC + B
Explanation: It would be a LOT more helpful for us if you had provided the answer choices for this question, but I'll try to help by explaining WHAT single-replacement reactions are.
Single-replacement reactions are reactions in which one ion displaces another to form a new compound . One reactant is an element; one reactant is a compound . One product is an element; one product is a compound . The reactant element is part of the compound product .
I hope this helped!
When [H+] = 4.0 × 10–9 M in water at 25°C, then
Kw =1.0×10–14.
b. pOH = 7.
c. [H3O+] = [OH–].
d. pH= 7
e. A-D are all correct
Answer:
a. Kw = 1.0 × 10⁻¹⁴
Explanation:
a. Let's consider the self-ionization of water.
2 H₂O(l) ⇄ H₃O⁺(aq) + OH⁻
The ion-product of water (Kw) at 25 °C is:
Kw = [H₃O⁺][OH⁻] = 1.0 × 10⁻¹⁴
c. Considering [H⁺] = [H₃O⁺] = 4.0 × 10⁻⁹ M, the concentration of OH⁻ is:
[OH⁻] = 1.0 × 10⁻¹⁴/[H₃O⁺] = 2.5 × 10⁻⁶ M
b. We can calculate the pOH using the following expression.
pOH = -log [OH⁻] = -log 2.5 × 10⁻⁶ = 5.6
d. We can calculate the pH using the following expression.
pH = -log [H⁺] = -log 4.0 × 10⁻⁹ = 8.4
When [H+] = 4.0 × 10–9 M in water at 25°C, then the [tex]Kw =1.0\times 10^-^1^4.[/tex]
What is dissociation constant?
Kw is the dissociation constant or ionization constant of water.
The self-ionization of water will be
[tex]\rm 2 H_2O(l) = H_3O^+(aq) + OH^-[/tex]
The dissociation constant of the water at 25°C will be
[tex]\rm Kw = [H_3O^+][OH^-] = 1.0 \times 10^-^1^4[/tex]
Thus, the correct option is a. [tex]Kw =1.0\times 10^-^1^4.[/tex]
Learn more about dissociation constant
https://brainly.com/question/3657057
What pH scale number represents a neutral.
What pH scale number represents a neutral.
The answer is 7
A 0.98 gram sample of a volatile liquid was heated to 348 k. the gas occupied 265 ml of space at a pressure of 0.95 atm. what is the molecular weight of this gas?
Answer:
The molecular weight is [tex]Z = 111.2 \ g/mol[/tex]
Explanation:
From the question we are told that
The mass of the sample is [tex]m = 0.98 \ g[/tex]
The temperature is [tex]T = 348 K[/tex]
The volume which the gas occupied is [tex]V = 265 \ ml = 265 *10^{-3} L[/tex]
The pressure is [tex]P = 0.95 \ atm[/tex]
Generally from the ideal gas equation we have that
[tex]PV = n RT[/tex]
Here n is the number of moles of the gas while the R is the gas constant with value [tex]R = 0.0821 \ atm \cdot L \cdot mol^{-1} \cdot K^{-1}[/tex]
[tex]n = \frac{PV}{ RT}[/tex]
=> [tex]n = \frac{ 0.95 * 265 *10^{-3} }{ 0.0821 * 348}[/tex]
=> [tex]n = 0.00881 \ mol[/tex]
Generally the molecular weight is mathematically represented as
[tex]Z = \frac{m}{n}[/tex]
=> [tex]Z = \frac{0.98 }{0.00881}[/tex]
=> [tex]Z = 111.2 \ g/mol[/tex]
