What evidence supported the inflation theory? (the big bang theory one pls)

Answer:

Rounded to three significant figures:

(a) [tex]2 \times 575\; \rm nm = 1150\; \rm nm = 1.15\times 10^{-6}\; \rm m[/tex].

(b) [tex]\displaystyle \left(1 + \frac{1}{2}\right) \times (575\;\rm nm) \approx 863\; \rm nm = 8.63\times 10^{-7}\; \rm m[/tex].

Explanation:

Consider a double-slit experiment where a wide beam of monochromatic light arrives at a filter with a double slit. On the other side of the filter, the two slits will appear like two point light sources that are in phase with each other. For each point on the screen, "path" refers to the length of the segment joining that point and each of the two slits. "Path difference" will thus refer to the difference between these two lengths.  

Let [tex]k[/tex] denote a natural number ([tex]k \in \left\lbrace0,\, 1,\, 2,\, \dots\right\rbrace[/tex].) In a double-split experiment of a monochromatic light:

The path difference is at a minimum (zero) at the center of the screen between the two slits. That's the position of the first maximum- the central maximum, a bright fringe where [tex]k = 0[/tex] in [tex]\text{Path difference} = 0[/tex].

The path difference increases while moving on the screen away from the center. The first order maximum is at [tex]k = 1[/tex] where [tex]\text{Path difference} = \lambda[/tex].

Similarly, the second order maximum is at [tex]k = 2[/tex] where [tex]\text{Path difference} = 2\, \lambda[/tex]. For the light in this question, at the second order maximum: [tex]\text{Path difference} = 2\, \lambda = 2 \times 575\; \rm nm = 1.15\times 10^{-6}\; \rm m[/tex].

The dark fringe closest to the center of the screen is the first minimum. [tex]\displaystyle \text{Path difference} = \left(0 + \frac{1}{2}\right)\cdot \lambda = \frac{1}{2}\, \lambda[/tex] at that point.

Add one wavelength to that path difference gives another dark fringe- the second minimum. [tex]\displaystyle \text{Path difference} = \left(1 + \frac{1}{2}\right)\cdot \lambda[/tex] at that point.

For the light in this question, at the second order minimum: [tex]\displaystyle \text{Path difference} = \left(1 + \frac{1}{2}\right)\cdot \lambda = \left(1 + \frac{1}{2}\right)\times (575\; \rm nm) \approx 8.63\times 10^{-7}\; \rm m[/tex].

Answer:

usa

Explanation:

Answer:

D) The force F is perpendicular (normal) to both velocity V and magnetic field B.

Explanation:

When a charged particle enters a magnetic field, it experiences a force which changes its direction of travel. The direction of motion of the charged particle, the magnetic field direction, and the direction of the force, are all perpendicular to one another. According to Lorentz right hand rule, hold the right hand parallel to the ground, with the palm facing up, and the thumb held out at right angle to the other fingers. If the direction of the other fingers represents the magnetic field line and direction, and the thumb represents the direction of motion of a positively charged particle, then, the palm will push up in the direction of the force. For a negatively charged particle, the force will push down in the direction of the back of the hand.

Answer:

 w = -101 rad / s

Explanation:

For this exercise we will use Faraday's law

          E = - dФ / dt

where the magnetic flux is

          Ф = B. A = B A cos θ

In this case, the angle between the magnetic field and the normal to the disk is zero, cos 0 = 1, they indicate that the field is constant, let's find the area

The area rotated by the disk is

         A = ½ r s

if we express the angles in radians

         θ = s / r

         s = r θ

where is the arc supported

         A = ½ r (r θ)

let us substitute in the Faraday equation

          E = - d (B ½ r² θ) / dt

          E = - ½ B r² dθ/dt

the definition of angular velocity is

          w = dθ/dt

          E = - ½ B r² w

           w = - 2E / B r²

let's calculate

         w = - 2 3.86 / (0.0314 1.56²)

         w = -101 rad / s

Answer:

Oxygen-Symbol-O Potassium Symbol-K

A) Valency is the combining capacity of any element. Valence electrons refers to the electrons found in the outermost shell of the atom of the element.

B) Symbol and valency:

C) The reaction would be:

[tex] \large{ \boxed{ \rm{2Mg + O_2 \longrightarrow \: 2MgO}}}[/tex]

[tex] \large{ \boxed{ \rm{Magnesium + Oxygen \longrightarrow Magnesium oxide.

}}}[/tex]

━━━━━━━━━━━━━━━━━━━━

You haven't told us what any of those letters represents.

I'm going to assume that ...

-- ' P ' = power

-- ' I ' = circuit current

-- ' V ' = circuit voltage

-- ' E ' = energy

-- ' t ' = time.

Now I'm ready to answer the question that I just invented.

P = I / V

V = P x I

Both of these are false statements, and can't be used to calculate anything.

P = I x V   is the correct equation to calculate electrical power.

E = P x t   is the correct equation to calculate electrical energy.

Answer:

a. 26.7 cm. b. 11.4 cm.

Explanation:

a. We know h'/h = d'/d where h' = image height = + 2 cm (since it is a real image), h = object height = + 1.5 cm, d' = image distance from mirror and d = object distance from mirror = 20 cm

So, from h'/h = d'/d

d = h'd/h

= 2 cm × 20 cm/1.5 cm

= 40/1.5 cm

=  26.67 cm

≅ 26.7 cm

The position of the image is 26.7 cm from the mirror

b. Using the mirror formula

1/d + 1/d' = 1/f where d = object distance from mirror = + 20 cm, d' = image distance from mirror = + 26.7 cm (its positive since its a real image) and f = focal length of mirror.

So, 1/d + 1/d' = 1/f

⇒ f = dd'/(d + d')

= 20 cm × 26.7 cm/(20 cm + 26.7 cm)

= 534/46.7

= 11.43 cm

≅ 11.4 cm

The focal length of the mirror is 11.4 cm

Explanation:

a) Acceleration is the slope of the velocity vs time graph.  When velocity vs time is a straight line, that means the acceleration is a constant.  F = ma, so the resultant force is also constant.

b) As air resistance increases, the acceleration begins to decrease.

c) A falling object stops accelerating when it reaches terminal velocity.

d) F = ma, so when the acceleration is 0, the resultant force is also 0.

Answer:

-40

Explanation:

-40= (9/5)(-40) + 32

=-72 + 32

-40=-40

Answer: Helium=4 is the answer

Explanation:

took the test and got it right that'

s the answer.

Answer:

It's b

Explanation:

I took the quiz on EDGE and got it right.

Answer:

B for BIG

Explanation:

carbs and fats is energy, if not being use or burned off, it'll be becomes body fat.

Answer:

D:rarefactions and compressions

Explanation:

Longitudinal waves are readily formed in materials such as a stretched spring. Longitudinal waves are waves which travel in a direction parallel to the vibrations of the medium.

Longitudinal waves are characterized by a series of compressions and rarefactions. The compressions are areas of clusters while rarefactions are areas of expansions. The same can be observed in a sound wave.

Answer:

the elastic constant of the spring=1.715

the length of the spring=0.28

Explanation:

we know that according to hooks law

F=-k x

F= force

k= elastic constant

x= extension or compression

given

length change from 35cm to 55 cm so delta x = L2-L1= 55-35=20 cm

now to find k we need F and F =ma

M for part a is 3.5 kg

so F=3.5 kg *9.8=34.3

now k=F/x

k=34.3/20=1.715 N/cm=171.5 N/m

now to find length given mass is 5 kg so

F= ma

F=5*9.8=49 N

so x =F/k

x=49/171.5

x=0.28

Answer:

The answer is 29 AU

Hoped I helped

mark me as brainliest

Answer:

29

Explanation:

Answer:

Creative thinking

Explanation:

As you can see in the question above, when Mandleev needed to organize the chemical elements in a logical, organized and efficient way, he thought until he came to the conclusion of organizing them according to the atomic weight of each one. This is a clear example of creative thinking, which is the term that refers to the act of solving a problem based on thought and reasoning.

Answer:

Creative thinking

Explanation:

Answer:

v = 60 m/s

Explanation:

It is given that,

A wave is represented by the equation :

[tex]y=0.2\sin [0.4\pi (x-60)t][/tex]

We need to find the velocity of the wave

The general equation of a wave is given by :

[tex]y=A\sin (kx-\omega t)[/tex] ....(1)

Equation (1) can be written as :

[tex]y=0.2\sin (0.4\pi x-24\pi t)[/tex] ...(2)

If we compare equation (1) and (2) we get :

[tex]k=0.4\pi[/tex]

[tex]\omega=24\pi[/tex]

The velocity of a wave is given by :

[tex]v=\dfrac{\omega}{k}\\\\v=\dfrac{24\pi}{0.4\pi}\\\\v=60\ m/s[/tex]

So, the velocity of the wave is 60 m/s.

Explanation:

this is it. hope u understand

Answer:

The ending pressure is R.

Explanation:

This is Recreational scuba diving (R). According to standards, this diving has prescribed depth limit of 130 ft. This means that the limit must include a depth that is not greater than 130 ft while using only compressed air and not even requiring a decompression stop.

Now, from the question, we can see that that there was a prescribed limit of 60ft of water with a planned bottom time of 30 minutes.

Thus, the ending pressure is R.

Answer:

D!!!!!

Explanation:

A hypothesis is a supposition or proposed explanation made on the basis of limited evidence as a starting point for further investigation.

Answer:

D. An educated guess about the outcome of an experiment.

Explanation:

Hypothesis is an educated guess about the outcome of an experiment.

Hope this helps ;) ❤❤❤

Answer:

is the last one, a magnetic wave and electrical current moving in opposite directions

Explanation:

opposite directions always attract in magnetic waves and fields

Answer:

Principle Archimedes is applied in building a ship and submarine using the manipulating that buoyancy, is controlled the ballast tank system.

Explanation:

Submarine is rather had they focused on main parts of the submarine,he is complex and long process implementation,the most submarine design like submarine stability.

Submarine stability is complete and the fundamental Archimedes principle to arrive the weight of submarine is equal to buoyancy force.

Submarine into the parts and components of ballast tank the sequence in diving and surfacing,there two vital parts:-  flood parts and air vents

flood parts:- at the bottom position and allow water to enter or leave that tank.

air vents:- air vents at the top of the pressure hall,and that they submarine dive.

this time submarine is most modern system is depth is 300 to 450 meters,high pressure  air is 15 bar is tank air valve.

submarine is basic of the effective volume of all the submarine surfaced condition,submarine minus to the free water flood is equal to the fully pressure hull,submarine is the surfaced condition.

Answer:

The correct option is;

Industrial organizational psychologist

Explanation:

Industrial organizational psychology is a branch of the study of psychology that looks into the application of psychological principles and theories in industrial and organizational settings.

An industrial organizational psychologist provide support to organizations such analyzing orientation and behavior, assessment of the organization, training company personnel on how to be or become a good leader, design and development of organizational products , analysis of customer choices, the satisfaction of the customers, and the strategy the organization follows in marketing of their products such as to increase awareness and understanding of human behavior in a workplace setting.

Answer:

τ= F r     into the blade

Explanation:

The moment of a force is defined by

         τ = F x r

where the bold indicates vectors

Let us write in the expression in magnitude

         τ = F r sin θ

in our case the force is tangent to the wheel therefore the angle between F and the radius is 90º, and the sin 90 = 1

       τ= F r

The direction of τ can be used by the rule of the right hand, the fingers curve in the direction of the torque when advancing from the force to the radius and the thumb points in the direction of the torque.

In this case, for a clockwise rotation, the fingers are curved in the direction and the thumb points into the blade, this is the direction of the τ.

TRASLATE

El momento de una fura es definido por

         τ = F x r

donde la negrillas indican vectores

Escribamos en ta expresión en magnitud

          τ = F r sin θ

en nuestro caso la fuerza es tangente a la rueda por lo tanto el angulo entre F y el radios es 90º, y el sin 90=1

        τ = F r

la dirección de tau la podemos  usar la regla de la mano derecha, los dedos curva en la dirección del torque al avanzar dese la fuerza al radio y el pulgar apunta en la dirección del torque.

En este caso para un giro en sentido horario los dedos se curvan ente sentido y el pulgar apunta hacia dentro de lla hoja, esta es la dirección del troque

Answer:

it will be 8ms-1

Explanation:

MaUa+MbUb=MaVa+MbVb

Answer:

The mass of the object and its height in the gravitational field of the Earth.

Explanation:

If we are talking about gravitational potential energy which is defined as:

[tex]U=m\,*\,g\,*\,h[/tex]

being "m" the object's mass, "g" the acceleration due to gravity, and "h" the height at which the object is located relative to the conventionally picked level for zero of potential energy.

As long as the value of "g" is constant, the only two variables that determine the gravitational potential energy are the mass (m) of the object and its relative height (h).

Answer:

The objects weight and height above Earth's surface

Explanation:

K12 :)

Answer:

  2.4583 ± 0.0207 seconds

Explanation:

The time period of a pendulum is approximately given by the formula ...

  T = 2π√(L/g)

The maximum period will be achieved when length is longest and gravity is smallest:

  Tmax = 2π√(1.51/9.7) ≈ 2.47903 . . . seconds

The minimum period will be achieved for the opposite conditions: minimum length and maximum gravity:

  Tmin = 2π√(1.49/9.9) ≈ 2.43756 . . . seconds

If we want to express the uncertainty using a symmetrical range, we need to find half their sum and half their difference.

  T = (2.47903 +2.43756)/2 ± (2.47903 -2.43756)/2

  T ≈ 2.4583 ± 0.0207 . . . seconds

__

We have about 2+ significant digits in the given parameters, so the time might be rounded to 2.46±0.02 seconds.

Answer:

The energy that can be stored in the capacitor is 239 nJ

Explanation:

We first calculate the capacitance of each material. Let C₁ be the capacitance of pyrex glass and C₂ be the capacitance of polystyrene.

C₁ = κ₁ε₀A/d where κ₁ = dielectric constant of pyrex glass = 5, A = area of plates = L² where L = length of square plate = 7.40 cm = 7.40 × 10⁻² m and d = thickness of pyrex slab = 1.60 mm = 1.60 × 10⁻³ m and ε₀ = permittivity of free space = 8.854 × 10⁻¹² F/m

C₁ = κ₁ε₀A/d = κ₁ε₀L²/d = 5 × 8.854 × 10⁻¹² F/m × (7.40 × 10⁻² m)²/1.60 × 10⁻³ m = 2424.2252/1.60 × 10⁻¹¹ F = 1515.14 × 10⁻¹¹ F = 15.2 × 10⁻⁹ F = 15.2 nF

C₂ = κ₂ε₀A/d where κ₂ = dielectric constant of polystyrene = 3, A = area of plates = L² where L = length of square plate = 7.40 cm = 7.40 × 10⁻² m and d = thickness of polystyrene slab = 1.60 mm = 1.60 × 10⁻³ m and ε₀ = permittivity of free space = 8.854 × 10⁻¹² F/m

C₁ = κ₁ε₀A/d = κ₁ε₀L²/d = 3 × 8.854 × 10⁻¹² F/m × (7.40 × 10⁻² m)²/1.60 × 10⁻³ m = 1454.5351/1.60 × 10⁻¹¹ F = 909.08 × 10⁻¹¹ F = 9.09 × 10⁻⁹ F = 9.09 nF

Since the capacitors are in series, we find their effective capacitance C from

1/C = 1/C₁ + 1/C₂

C = C₁C₂/(C₁ + C₂)

= 15.2 × 10⁻⁹ F × 9.09 × 10⁻⁹ F/(15.2 × 10⁻⁹ F + 9.09 × 10⁻⁹ F)

= 138.168 × 10⁻¹⁸/24.29 × 10⁻⁹ F

= 5.69 × 10⁻⁹ F

The amount of electrical energy stored in a capacitor is given by W = 1/2CV² where C = capacitance and v = voltage applied. Now C = 5.69 × 10⁻⁹ F and V = 84.0 V for this capacitor

So W = 1/2 × 5.69 × 10⁻⁹ F × 84.0 V

= 238.98 × 10⁻⁹ J

≅ 239 × 10⁻⁹ J

= 239 nJ

So the energy that can be stored in the capacitor is 239 nJ

Answer: Some of the ways to control noise pollution are as follows: (1) Control at Receiver's End (2) Suppression of Noise at Source (3) Acoustic Zoning (4) Sound Insulation at Construction Stages (5) Planting of Trees (6) Legislative Measures.

Answer:

You have to:

a) Improve your insulation.

b) Install a fence

c) Use modern Acoustic wall panels

d) Plant trees

e) Reduce electronic volumes,e.t.c.

Explanation:

okay.

Answer:

Explanation:

Energy of gamma ray = 2.2233 MeV

Let mass of neutron be n  amu  

mass defect of deuteron = 2.013553212 - ( 1.007 276 467 + n ) u .

in terms of energy this mass defect will be equal to energy of gamma ray

1 amu = 931 MeV

931 [ 2.013553212 - ( 1.007 276 467 + n ) ] =  2.2233

( 1.007 276 467 + n ) -  2.013553212  = .00238807733

n = 1.008664822 amu

so mass of neutron = 1.008664822 amu

Answer:

I guess i would say the microscope

Explanation:

Because of the microscope, we can see the cells.