Answer:
it changes from Lower temperature to higher temperature
What process must occur to cause sediment to stick together when forming sedimentary rock?
cooling
cementation
Compaction
weathering
Answer:
Compaction and Cementation
Dissolved minerals in the ground water precipitate (crystallize) from water in the pore spaces forming mineral crusts on the sedimentary grains, gradually cementing the sediments, thus forming a rock
Which one of the give elements the least reactive?
A. Fluorine
B. Chlorine
C. Iodine
D. Bromine
Answer:
c
Explanation:
iodine is the answer.please mark me as brianlist.
Answer:
Fluorine
Explanation:
It is the most reactive
After using soap to wash dishes by hand, it is sometimes difficult to keep your hands from remaining slick. Explain why rinsing your hands in lemon juice would make them less slick.
Answer:
Explanation: Rinsing hands in lemon juice would make them less slick because when a acid (soap) and a alkaline (lemon juice) reacts it becomes neutral
Chemical bond meant by.... what?
Answer:
Chemical bonding, any of the interactions that account for the association of atoms into molecules, ions, crystals, and other stable species that make up the familiar substances of the everyday world.
Answer:
A chemical bond is the physical phenomenon of chemical substances being held together by attraction of atoms to each other through sharing, as well as exchanging, of electrons -or electrostatic forces.
A substance was analysed and found to contain 26.57 % potassium, 35.36% chromium, and
38.07 % oxygen by mass.
What is the empirical formula of the substance?
Select one:
question
O a. K2Cr205
O b. K2Cr207
O c. KCr2O7
O d. K_Cro
Answer: K2Cr2O7
Explanation: Pretend we have 100g of the compound. use the percentage to calculate how many grams of each element are in the 100g.
K: 26.57g
Cr: 35.36 g
O: 38.07 g
Now divide by the molar mass of each element to find the moles of each:
K: 0.7 moles
Cr: 0.7 moles
O: 2.4 moles
That gives us 3.8 moles total. But what's important is to find a factor that would bring all of these mole values to a whole number, since they must be in whole number proportions. The closest I got was around 3.
That would lead to the following empirical formula: K2Cr2O7.
22 °C to K (approximate room temperature)
Answer:
295.15 i think
Explanation:
At the end of an experiment, a scientist ___ or ____ his/her hypothesis.
Supports, proves
Proves, rejects
Supports, rejects
Disproves, proves
Is every mixture also a solution? Is every solution also a mixture? Explain.
Answer:
Not all mixtures are solutions. A solution is a specific term that describes an even or homogeneous mixture of a solute, the substance being mixed, in a solvent, the substance that is in a greater amount in which the solute dissolves. All solutions are mixtures because it is two or more substances mixed together.
2. What do you think may have happened to the "bad" chocolate bar? Do you think
it was made poorly? Or do you think something happened to the chocolate on the
way to the customer? Also, is there a way Charlotte can avoid this issue in the future?
Explain.
Answer:
2
Explanation:
Write the IUPAC name of (image attached) (2 COOH)
Answer:
1,2-benzenedicarboxylic acid /phthalic acid
advantages and disadvantages of chemical
Answer:
Advantages :they are used for seeing chemical reactions .
they are used for doing chemical experiment .
they are used for making affective medicines .
Disadvantages :they harms to our environment.
they can make side effects in our body by affective medicines made by chemicals.
while doing different unknown experiments they make explosions which can also harm to us.
Balance and classify the following equations as synthesis, decomposition, single replacement, double replacement, or combustion: a. C4H10 + 02 -> CO2 + H20 Reaction Type: b. ___ HNO3 + Mg(OH)2 -> Mg(NO3)2 + H20 Reaction Tyne.
what is the mass 2 moles of urea
Answer:
60.06 g/mol
The solute is urea, CO(NH2)2. Molar mass of urea: (12.01) + 16.00 + 2(14.01 + 2(1.008)) = 60.06 g/mol.
Explanation:
please mark me brainliestAnswer:
60.06 g/mol
Explanation:
the solution area,CO(NH2)2.molar mass urea:
(12.01)+16.00+2(14.01+2(1.008))=60.06g/mol
If I have 2.4g of magnesium, how many g of oxygen(O2 ) will I need to react completely with the magnesium? 2Mg +O2 → MgO
Explanation:
just trying....hope that helps
1.6 grams of oxygen will react with 2.4 grams of magnesium.
Explanation:
Given:
2.4 grams of magnesium.
The reaction between magnesium and oxygen:
[tex]2Mg+O_2\rightarrow 2MgO[/tex]
To find:
The mass of oxygen required to react with 2.4 grams of magnesium.
Solution:
The mass of magnesium = 2.4 g
Moles of magnesium =[tex]\frac{2.4 g}{24.305 g/mol}=0.0987 mol[/tex]
[tex]2Mg+O_2\rightarrow 2MgO[/tex]
According to the reaction, 2 moles of magnesium reacts with 1 mole of oxygen, then 0.0987 moles of magnesium will react with:
[tex]=\frac{1}{2}\times 0.0987 mol=0.04935\text{mol }O_2[/tex]
Moles of oxygen required = 0.04935 mol
The mass of 0.04935 moles of oxygen :
[tex]=0.04935\times 31.999 g/mol=1.579 g\approx 1.6 g[/tex]
1.6 grams of oxygen will react with 2.4 grams of magnesium.
Learn more about the unitary method and moles here:
brainly.com/question/2499283?referrer=searchResults
brainly.com/question/20703532
How many elements are in “H2”
1. Obtain Information Search for and watch an
online video clip that shows the lotus effect.
What do
you
think causes this phenomenon?
Answer:
up with you and the other day and I don't think I can get a chance
Why is agar medium used in Petri dishes?
A.It makes bacteria appear larger.
B.It sterilizes the petri dish.
C.It helps microorganisms grow.
D.It makes cells glow.
Answer:
C is the correct answer.
Explanation:
Agar provides a solid growth surface for the bacteria, upon which bacteria reproduce until the distinctive lumps of cells.
The agar medium is used in Petri dishes because it helps microorganisms grow. option C is correct.
What is a microorganism?A microorganism is a microscopic body that cannot be seen with the normal human eyes on anything it can be a virus or bacteria or both. Viruses are disease-causing mostly but there are some good bacteria too.
The use of agar medium is the source of food for the microorganism as all the micronutrients and macronutrients with essential amino acids are present into it.
Therefore, option C is the correct agar medium used in Petri dishes because it helps microorganisms grow.
Learn more about microorganism, here:
https://brainly.com/question/9004624
#SPJ2
HELLO MAY SOMEONE PLZ HELP ME ON THIS!!!;$7&:
Answer:
Variable data is defined as information and figures used to build control charts. Variable data can be used to create average (X-bar) charts, range charts, and sample standard deviation charts or "S-charts."
Could any one help on this fill in questions
Does a radio have energy if it’s turned off
Answer:
no
Explanation:
Stars with a greater overall mass are and , and they consume their nuclear fuel .
Answer:
they will expand
Explanation:
as they bring out they become red giants then eventually white dwarfs or the scarier options a black hole
Calculate the mass of a solid metal cylinder with a density of 2.6 g/cm", a
diameter of 1.8 cm, and a length of 4 cm.
Answer:
V= π ×r² × h
V = 3.14 × (0.9)² × 4
V = 3.14 × 0.81 × 4
V = 10.1736
Mass = Volume × density
M = 10.1736 × 2.6
M = 26.45136 g
PLS HELP ME
The moon is 2.39 • 10^5 miles from the earth. The
average man is 6 feet tall. How many men would have
to stand on top of one another to reach from the earth
to the moon? (there are 5,280 feet in a mile. How many
miles is 6 feet?)
Number of men required to stand on top of each other to reach moon from earth are :
[tex] \boxed{ \boxed{ \: \: \: \: \: \: \: 210320000 \: \: \: \: \: \: \: }}[/tex]
Can someone help me out on this ♡
Explanation:
Actually, the diagram showned in the picture gave you some hints.
Moving every one block to the left indicates 10 times the value of the symbol than the previous one.
For instance,
[tex]1\text{ km}=10^1\text{ hm}=10^2\text{ dam}=10^3\text{ m}[/tex]
Take the first question as example, since "k" is 9 blocks from the left of mu (u),
[tex]1 \text{ kg}=10^9 \text{ }\mu\text{g}[/tex]
[tex]\text{So }.000078\text{ kg}=.000078\times10^9 \text{ }\mu\text{g}=7.8\times10^{-5}\times10^9 \text{ }\mu\text{g}=7.8\times 10^4\text{ }\mu\text{g}[/tex]
Similarly,
[tex]1 \text{ cL}=10^{-2} \text{ L}[/tex]
[tex]\text{So }34800\text{ cL}=34800\times10^{-2} \text{ L}=3.4800\times10^{4}\times10^{-2} \text{ L}=3.48\times 10^2\text{ L}[/tex]
[tex]1 \text{ Mm}=10^{3} \text{ km}[/tex]
[tex]\text{So }.0283\text{ Mm}=.0283\times10^{3} \text{ km}=2.83\times10^{-2}\times10^{3} \text{ km}=2.83\times 10^1\text{ km}[/tex]
Which of the following is NOT a correct conversion factor?
1 cm = 0.01 m
1 km = 1000 m
1 cm = 100 m
1 dm = 0.1 m
Answer: 1 cm = 100m
Explanation: Centi- is the prefix used to designate 0.01 (one hundredth) of something. 1 cm means 0.01 m.
1 cm = 100 m is NOT a correct conversion factor. Option C is correct.
what are conversion factors?The conversion factors are the factors that re-use to convert some values from unit to unit of another value like from centimeter to meter from meter to kilometer from milligram to gram.
In one centimeter it is the suffix used to denote it is the one by hundred value of the on meter or which is equal t one meter so, 1cm = 0.01 meters as it is the 1/100 part f the one-meter distance.
Therefore, Option C is correct. 1 cm = 100 m is NOT a correct conversion factor.
Learn more about conversion factors, here:
https://brainly.com/question/28366871
#SPJ2
You decide to clean the bathroom. You notice that the shower is covered in a strange green slime. You decide to try to get rid of this slime by adding lemonade juice. You spray half of the shower with lemonade juice and spray the other half of the shower with water. After 3 days of spraying equal amounts 3 times a day, there is no change in the appearance of the green slime on either side of the shower. How many trials are being performed in this example?
Answer:
3
Explanation:
Please help me!! Really important
Answer:
Lanthanum and Lutetium
I hope this will help you
A ___________
is a process that occurs when
one or more substances are changed into one or more new
substances. For example, when zinc and sulfur are mixed
together with the addition of energy in the form of heat, zinc
sulfide (ZnS) is produced.
Answer:
Reaction??
Explanation:
Can someone please help me
(1) One night while looking through his telescope,
Reginald saw three planets in the sky. X, Y. and
Z. X was smaller than Y, and Y was smaller than Z.
Was Z larger or smaller than X?
Answer:
Z was smaller than X
Explanation:
if X<Y and Y<Z
therefore X<Z
How to separate thumb tacks and plastic beads?
How to separate color components of a leaf?
Explanation:
Add ethanol ( or whichever you choose) into the mixture.
Use a filter to separate the salt from mix.
Evaporate the ethanol/petroleum spirit -sugar mix to get the sugar by itself.
Done!
Answer: 1) a) Use a magnet, or b) add to water abd scoop off the floating plastic beads
2) Grind the leaf and solubilize what you can in water, then use filter paper as a chromatograph to separate the colors.
Explanation:
1) Look for any property between the two substances that has a large enough difference to provide an avenue for separation. Density is good, particle size also can be used, solubility, and magnetic properties, among others.
2) https://www.britannica.com/science/paper-chromatography