Below are descriptions of different center voids of a solid fuel. Which design
shape will generate the most thrust?
A. A heart
OB. A circle
C. A triangle
O D. A tree with branches
B. A circle.
The center void shape that generates the most thrust in a solid fuel rocket is a circle.
What is Fuel?
Fuel is a substance that is used to produce heat or energy through combustion or other chemical reactions. It can be in the form of a solid, liquid, or gas and is typically used to power engines, generators, or heating systems. Examples of fuels include gasoline, diesel, natural gas, coal, wood, and propane. The choice of fuel depends on factors such as availability, cost, energy content, and environmental impact.
This is because a circular shape allows for the most efficient burning of the fuel, with the flame front moving evenly in all directions. Other shapes, such as a heart, triangle, or tree with branches, can cause uneven burning and may result in less thrust.
Learn more about Fuel from the given link
https://brainly.com/question/10172005
#SPJ1
Answer:
Explanation:
D.
tree with branches
A 20.0 mL solution of NaOH is neutralized with 24.1 mL of 0.200 M HBr. What is the concentration of the original NaOH solution
Answer:
0.241 M
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
HBr + NaOH —> NaBr + H₂O
From the balanced equation above,
The mole ratio of acid, HBr (nₐ) = 1
The mole ratio of base, NaOH (n₆) = 1
Finally, we shall determine the concentration of the NaOH solution. This can be obtained as follow:
Volume of base, NaOH (V₆) = 20 mL
Volume of acid, HBr (Vₐ) = 24.1 mL
Concentration of acid, HBr (Cₐ) = 0.2 M
Concentration of base, NaOH (C₆) =?
CₐVₐ / C₆V₆ = nₐ/n₆
0.2 × 24.1 / C₆ × 20 = 1/1
4.82 / C₆ × 20 = 1
Cross multiply
C₆ × 20 = 4.82
Divide both side by 20
C₆ = 4.82 / 20
C₆ = 0.241 M
Therefore, the concentration of the NaOH solution is 0.241 M
aseous methane will react with gaseous oxygen to produce gaseous carbon dioxide and gaseous water . Suppose 5.5 g of methane is mixed with 13.9 g of oxygen. Calculate the maximum mass of carbon dioxide that could be produced by the chemical reaction. Round your answer to significant digits.
Answer:
There is 9.6 grams of CO2 produced
Explanation:
Step 1: Data given
Mass of methane = 5.50 grams
Molar mass of methane = 16.04 g/mol
Mass of oxygen = 13.9 grams
Molar mass of oxygen = 32.0 g/mol
Step 2: The reaction
CH4(g) + 2O2(g) → CO2(g) + 2H2O(g)
Step 3: Calculate number of moles
Moles = mass / molar mass
Moles methane = 5.50 grams / 16.04 g/mol
Moles methane = 0.343 moles
Moles oxygen = 13.9 grams / 32.0 g/mol
Moles oxygen = 0.434 moles
For 1 mol CH4 we need 2 moles O2 to produce 1 mol CO2 and 2 moles H2O
O2 is the limiting reactant. It will completely react (0.434 moles).
There will react 0.434/2 = 0.217 moles CH4
There will remain 0.343-0.217 = 0.126 moles CH4
There will be produced 0.434 moles of H2O and
0.434/2 =0.217 moles of CO2
Step 4: Calculate mass of products
Mass = moles * molar mass
Mass CO2 = 0.217 moles ¨44.01 g/mol
Mass CO2 = 9.6 grams
Mass H2O = 0.434 moles * 18.02
Mass H2O = 7.8 grams
EN LA MINA DE CHUQUICATAMA SE EXPLOTA DIFERENTES METALES COMO SER EL COBRE , AL ESTAR EN CONTACTO CON EL AIRE DICHO METAL SE LLEGA A OXIDAR FORMANDO DOS CLASES DE OXIDO¿CUALES SON ESTOS DOS OXIDOS?
Answer:
Los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).
Explanation:
El cobre posee dos estados de oxidación más comunes, los cuales son +1 y +2.
En contacto con aire el cobre se puede oxidar para dar lugar al óxido cuproso u óxido de cobre (I):
4Cu + O₂ → 2Cu₂O
Dicha oxidación también puede dar lugar a la formación del óxido cúprico u óxido de cobre (II):
2Cu + O₂ → 2CuO
La formación del óxido cúprico se favorece a temperaturas mayores a la del ambiente (por encima de los 300 °C).
Por lo tanto, los dos óxidos que forma el cobre son óxido de cobre (I) y óxido de cobre (II) (Cu₂O y CuO, respectivamente).
Espero que te sea de utlidad!
¿Qué características distinguen a los coloides de otras mezclas?
Two magnets are stuck together. What might you have to do to get them to separate?
Explanation:
The easiest method to separating magnets is to slide them apart. When separating magnets keep in mind shear force. Magnets are measured on pull strength, so are up to five times easier to move if they are pushed apart instead of pulled apart. Small magnets slide relatively easily, even without spacers.
Firmly slide them away from each other and far enough apart so that they don't hop back together. Neodymium magnets are quite strong.
What are properties of a magnet?The properties of the magnet are:
Magnets will attract ferromagnetic.Like poles of the magnet repel each other and unlike poles bait each otherThe poles of the magnet are in the team.Thus, slide them away from each other and far enough apart so that they don't hop back together.
To learn more about magnets click here:
https://brainly.com/question/13026686
Polywool fibre is
a.natural
b.synthetic
c.monomer
d.blended
Polywool fibre is synthetic.
⇒b. Synthetic
Hope It Helps You ✌️
Answer:
[tex]\large{\underbrace{\underline{\fcolorbox{White}{pink}{\bf{b.synthetic }}}}}
[/tex]
help sdfghrthfbfdve aahhhhhhhh
If you refuse a legal chemical test issued by a law enforcement officer, the Division of Motor Vehicles is required to:
Answer: Revoke the driver's license for at least 12 months
Explanation:
Chemical tests are used in order to measure the amount of drugs or alcohol that is in the body of a person when the person was arrested. To do this, samples of the urine or blood of the person can be taken and the result will be used to know if the person was driving under the influence of alcohol or not.
If the person refuse a legal chemical test issued by a law enforcement officer, the Division of Motor Vehicles is required to revoke the the driver's license of the person for at least 12 months.
if drop a watermelon from the top of one of the tower dorms at CSU, and it takes 3.34 seconds to hit the ground, calculate how tall the building is in meters and then convert into feet.
Answer:
179.5 feet
Explanation:
54.718 m converted to 179.5 feet.
Which describes the difference between a claim and a scientific claim?
Claims are based more on truth than scientific claims are.
Anyone can make a claim, but a scientific claim is backed by experimental evidence.
Claims are based on evidence and scientific claims are made by scientists.
Controlled experiments are used in claims, while scientific claims use multiple trials.
Answer:
B. Anyone can make a claim, but a scientific claim is backed by experimental evidence.
<3 Have a nice day!!
Answer:
the awnser is B i got it right
Explanation:
Iron reacts with copper (I) sulfate to produce copper and iron (II) sulfate. If 4.32x10^25
particles of copper (I) sulfate react, how many moles of copper will be produced?
Fe + Cu2504 --> FeSO4 + 2Cu
Answer: 143.48 moles of copper will be produced.
Explanation:
We are given:
Number of particles of copper (I) sulfate = [tex]4.32\times 10^{25}[/tex]
According to the mole concept:
[tex]6.022\times 10^{23}[/tex] number of particles is contained in 1 mole of a compound
So, [tex]4.32\times 10^{25}[/tex] number of particles will be contained in = [tex]\frac{1}{6.022\times 10^{23}}\times 4.32\times 10^{25}=71.74mol[/tex] of copper (I) sulfate
The given chemical equation follows:
[tex]Fe+Cu_2SO_4\rightarrow FeSO_4+2Cu[/tex]
By the stoichiometry of the reaction:
If 1 mole of copper (I) sulfate produces 2 moles of Cu
So, 71.74 moles of copper (I) sulfate will produce = [tex]\frac{2}{1}\times 71.74=143.48mol[/tex] of Cu
Hence, 143.48 moles of copper will be produced.
WHAT IS PHOTOSYNTHESIS??
Answer:
the process by which green plants and some other organisms use sunlight to synthesize nutrients from carbon dioxide and water. Photosynthesis in plants generally involves the green pigment chlorophyll and generates oxygen as a by-product.
Answer:
the process by which green plants and some other organisms use sunlight to synthesize nutrients from carbon dioxide and water. Photosynthesis in plants generally involves the green pigment chlorophyll and generates oxygen as a by-product.
Oxygen is a diatomic element.why give reason.
Answer:
Diatomic molecules contain two atoms that are chemically bonded. If the two atoms are identical, as in, for example, the oxygen molecule (O2), they compose a homonuclear diatomic molecule, while if the atoms are different, as in the carbon monoxide molecule (CO), they make up…
Explanation:
yei hoo arko aaxaina ...
Which is a possible consequence of decreasing air quality resulting from global warming? drying out of fertile lands flooding of low-lying coastal areas melting of glaciers and polar ice caps decrease in population due to health threats The correct answer is decrease in population due to health threats.
Answer: A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.
Explanation:
When average temperature of Earth keeps on increasing for a longer period of time due to greenhouse gases, increased level of carbon dioxide and other gases etc then it is called global warming.
As humans use oxygen to sustain which is present in the air. So, when there will occur decrease in air quality that results from global warming then it means more illness or diseases will be there.
Hence, people will tend to die more often because of decrease in the air quality their health is getting affected.
Thus, we can conclude that a decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.
Answer:
A decrease in population due to health threats is a possible consequence of decreasing air quality resulting from global warming.
Explanation:
Hope this helps.
The formal charge and P-O bond order in PO43- respectively are 0.6, -0.75 -0.75, 1.25 1.0, -0.75 1.25, -3 98.
Answer:
-0.75 , 1.25
Explanation:
Number of electrons present in valence shell,
P-O = 5 + 8 = 13
Number of electrons involved in bond formation,
13 - 3 = 10
Number of bonds in PO3 - 4ion = 102
Average P-O bond = 1.25
Average formal charge on Oxygen atom is -0.75
What pollutants can contribute to acid precipitation and how are these pollutants generated?
Answer:
Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.
hope it helps
stay safe healthy and happy...Sulfur dioxide and nitrogen oxides can contribute to acid precipitation.
What are pollutants?A pollutant is a chemical or biological substance which harms water, air, or land quality.
Acid rain is caused by a chemical reaction that begins when compounds like sulfur dioxide and nitrogen oxides are released into the air. These substances can rise very high into the atmosphere, where they mix and react with water, oxygen, and other chemicals to form more acidic pollutants, known as acid rain.
Learn more about the pollutants here:
https://brainly.com/question/16101020
#SPJ2
In which of the following will the density increase?
Group of answer choices
An iron bar is heated.
A lead weight is moved from sea level to the top of a high mountain.
A sample of water is frozen.
A diamond is submerged in water.
A sample of chlorine gas is compressed.
Select the structure that corresponds
to the name:
decanoic acid
COOH
A.
B. CH3(CH2)7COOH
C. both
Answer:
b
Explanation:
Molecular formula of Decanoic Acid is C₁₀H₂₀O₂ therefore Option A is the right answer.
What is Decanoic Acid ?Decanoic Acid is a C10 , straight chain , saturated fatty acid . Its general formula is C₁₀H₂₀O₂ .
In the first option we can see a straight chain , saturated fatty acid and the molecular formula is also same as decanoic acid .
In second option the molecular formula is C₉H₁₈O₂ which is not same as Decanoic Acid.
Hence option A is the right answer.
To know more about Decanoic Acid;
https://brainly.com/question/8729762
#SPJ2
why atoms of magnet differ from normal atoms?
Copied answers ❌❌❌
Answer:
The magnetic field of an atom, say H (one electron revolving around a proton) is composed of two separate contributions: an orbital magnetic moment and a spin magnetic moment. We get magnetic moments because of electromagnetic induction associated with each type of electron motion. The electron revolving around the proton with a certain angular momentum is related to the associated orbital magnetic moment (and, yes, we model it as a wire loop with current expressed in terms of the orbital velocity). This can be calculated using elementary mechanics. The spin magnetic moment is a little trickier because it is caused by the intrinsic spin of the electron which is a quantum phenomenon; therefore, this spin magnetic moment can only be calculated using quantum mechanics. In the end, we get a certain net magnetic moment associated with this motion of the electron in an atom. It is important to notice that this atom acts as a magnetic dipole (remember, as of yet, magnetic monopoles don't exist!).
If we take a bulk magnet like you might have on your fridge, it would be composed of atoms. Each atom operates as a magnetic dipole, but due to internal atomic structures, the atoms actually align themselves into separate magnetic domains, each with a net magnetic moment (caused my individually adding up those atomic dipole moments). In a common magnet (ferromagnet), these domains all point the same direction and stay that way, creating a permanent bulk magnetic dipole.
So in a way, there is no difference between the magnetic field of an atom and that of a magnet because one is simply a sum of the other, making both magnetic dipoles. Of course, here we see that there's nothing that fundamental about the magnetic force. In reality, the magnetic force is a relativistic effect caused by the movement of a charged particle, making electricity (i.e. charge) the underlying property at work here. Electromagnetic induction is really a shortcut to understand the magnetic force without worrying about relativistic mechanics. If we were to discover magnetic monopoles (i.e. "magnetic" charge), this would re-write a lot that we know about electromagnetism because we couldn't label all magnetic forces as by-products of moving electric charge
help me plz!!!!
a. Calculate the solution concentration for each of the HCl samples. The first one has been done for you.
b. As the concentration of the HCl solution increased, did the speed of the reaction increase or decrease?
c. Therefore, as the concentration of a reactant increases, does the rate of the reaction increase or decrease?
d. Do your predictions previous to this investigation agree with your results?
e. Make a general rule about the effects of concentration of reactants on reaction rates.
Answer:
From this solution, you can do the a number question answer.
HELPPPPPPPP i accidentally pressed on c
Answer:
a
Explanation:
I'm not completely sure tho veary sorry if it's wrong
Answer:
the answer is C
Explanation:
as the yeast feeds on sugar and yields the ATP per glucose molecule and Carbon dioxide
How many bonds can a carbon atom form?
O A. 1
B. 2
C. 4
O D. 3
What kind of reactions are redox reactions
A reaction in which reduction and oxidation take place simultaneously known as a redox reaction.
Can someone please do a True or false for these PLEASE
Answer:
true
false
false
true
false
true
true
false
false
true
true
(6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol)= ?kj
Answer:
-2,802.960 kJ
Explanation:
The dimensional equation of the given quantities is presented as follows;
(6 mol) × (-393.5 kJ/mol) + (6 mol) × (-285.83 kJ/mol) - (1 mol) × (-1,273.02 kJ/mol) = ? kJ
The equation, can be written as follows;
[tex]\left (6 \times (-393.5) \, mol \times \dfrac{kJ}{mol} \right ) + \left(6 \times (-285.83) \, mol \times \dfrac{kJ}{mol} \right) - \left (1 \times (-1,273.02) \, mol \times \dfrac{kJ}{mol} \right) = ?[/tex]We note that [tex]mol \times \dfrac{kJ}{mol} \right) = kJ[/tex], therefore, the above equation becomes;
[tex]\left (6 \times (-393.5) \ kJ\right ) + \left(6 \times (-285.83) \ kJ \right) - \left (1 \, \times (-1,273.02) \ kJ \right) = -2,802.960 kJ[/tex]
Answer:
C. ((6 mol)(-393.5 kJ/mol) + (6 mol)(-285.83 kJ/mol)) - (1 mol)(-1,273.02 kJ/mol)
Explanation:
Got it right on edge.
: the one after is -2803.
1) The percentage of oxygen in dry air is _______
A. 0.1
B. 1.0
C. 21
D. 79
2) The composition of the Earth’s earliest atmosphere was different to that of the present atmosphere. Which of these gases was present in large amounts in the Earth’s earliest atmosphere?
A. Oxygen
B. Carbon dioxide
C. Ammonia
D. Nitrogen
Answer:
1) The percentage of oxygen in dry air is _______
C. 21
2) The composition of the Earth’s earliest atmosphere was different to that of the present atmosphere. Which of these gases was present in large amounts in the Earth’s earliest atmosphere?
B. CARBON DIOXIDE
Hope it helps
have a nice day
Answer: The percentage of oxygen in dry air is . 21
Explanation: Ammonia gases was present in large amounts in the easth7s earliest atmosphere
Hope it will help you
Please a little help in this I will really appreciate it
Answer:
b is your answer...........
SI units is an improved version of MKS system.
Answer:
the S.I unit
Explanation:
is the best unite
PLS HELP ASAPPP!!!
Compare and contrast an electrolytic cell with a voltaic cell. Provide one example where both are present in daily life.
Voltaic cells convert chemical energy to electrical energy by means of an oxidation-reduction reaction while Electrolytic cells convert electrical energy to chemical energy, so they are the opposite of voltaic cells,in an electrolytic cell, the cathode is negatively charged and the anode is positively charged
Answer:
ELECTROLYTIC CELL
An electrochemical cell in which a non-spontaneous chemical reaction takes place when electric current is passed through the solution,is called an electrolytic cell.
EXAMPLE
Nelsons cell and Downs cell
VOLTAIC CELL OR GALVANIC CELL
The electrochemical cell in which a spontaneous chemical reaction takes place and generates electric current is called galvanic and voltaic cell.
EXAMPLE
Daniel cell
Explanation:
