Answer:
It is important to be extra careful at night and in periods of low visibility from sunset to sunrise and to focus on operating the aircraft safely when the aircraft is moving. Ensure checklist are run through and avoid non essential communications prior to the aircraft being stopped and the breaks are set
Explanation:
According to aircraft rules and regulation, the position lights of an aircraft are required to be switched on on an aircraft which is either operated on the surface and during flight from sunset to sunrise or when the elevation of the Sun below the horizon is more than 6°
However, the anti collision lights are not required to be lighted during night operations, unless the pilot in command specifies it for safety reasons
a sprinter runs 100m in12.5seconds calculate the speed
Answer:
8m in 1 second
480m = 1 hour
11,520m in one day
Explanation:
Hope this is helpful
Define Circular motion and its types !
[tex] \green{\huge{\red{\boxed{\green{\mathfrak{QUESTION}}}}}} [/tex]
Define Circular motion and its types
[tex] \huge\green{\boxed{\huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}}}[/tex]
[tex]{ \red{ \bold {\mathbb {\textit{Circular \: motion}}}}}[/tex]
MOTION OF THE BODY CIRCULAR PATH IS CALLED CIRCULAR MOTION
A tengential is always responsible for change in speedIf the Direction of acc and velocity is same then body's speed incIf they r in oppsite direction then Body's speed dec .If speed becomes constant then tangential acc become zero .By the basis of tangial acc the circular motion is divided into two types uniform circular motion and non uniform circular motion[tex]{ \blue {\bold{UNIFORM \: CIRCULAR}}} \\ \green{ \bold{ MOTION}}[/tex]
when object in a circular path in a constant speed or constant circular speed is called uniform circular motion. In case of uniform circular motion acc tendial will be zero In case of uniform circular motion acc centripetal will be equal to net acc.[tex] { \green{ \bold{ NON UNIFORM}}} \\ {\blue{ \bold{CIRCULAR \: MOTION}}}[/tex]
Centripetal acc is not equal net acc Circular acc and tendial acc is not equal to zero .SINGLE CORRECT OBJECTIVE
Question 9
speed of a moving object is said to be uniform if it covers equal distances in equal interva
time.
о O
ghte
O false
Your Answer:
Next
Answer:
True
Explanation:
Formula for speed is;
Speed = distance/time
Now, if an object covers an equal distance in equal time intervals, it means the speed will remain the same.
For example if an object covers 3 m every 1 second it means speed will always be; 3/1 = 3 m/s.
Thus the statement is correct.
1. Un cable está tendido sobre dos postes colocados con una separación de 10,0 m. A la
mitad del cable esta colgado un letrero que provoca que el cable baje 50,0 cm. Si la tensión
de cada segmento del cable es de 2 000 N ¿Cuál es el peso del letrero?
1.Realice el esquema o dibujo de la situación del problema
2. Realice el Diagrama de Cuerpo Libre sobre el letrero, recuerde colocar el valor del ángulo de cada tensión.
plis s
Explanation:
Hydraulic Pressure-Control, On-Off Deluge Valve
FP-400Y-5DC
The BERMAD model 400Y-5DC is an elastomeric, hydraulic line pressure operated deluge valve, designed specifically for advanced fire protection systems and the latest industry standards. The 400Y-5DC is activated by a hydraulically operated relay valve, through which opening and closing of the valve can be controlled either with a remote hydraulic command or with a wet pilot line with closed fusible plugs. An integral pressure reducing pilot valve ensures a precise, stable, pre-set downstream water pressure. The optional valve position indicator can include a limit switch suitable for Fire & Gas monitoring systems. The 400Y-5DC is ideal for systems that combine a remote wet pilot line with a high pressure water supply.
A Body is said to be in equilibrium when its:-
a) Acceleration is uniform
b) Speed is uniform
c) Speed and acceleration are uniform
d) Speed is uniform
I need the right answer. Please quick
Answer:
speed i uniform
Explanation:
if the speed is constant
Answer:
A
Explanation:
if it has a constant acceleration
When your vehicle turns a corner, the tracks made by the rear tires are always: a) Outside of those made by your front tires b) Inside of those made by your front tires c) On top of those made by your front tires d) None are correct
Answer:
I think it's D
Explanation:
because I have seen the tracks of the tires
explain why it is important that the Earths atmosphere absorbs gramma rays emitted by the sun
Answer:
Gamma rays have so much energy they could harm people on Earth. People are protected from gamma rays by Earth's atmosphere. The atmosphere absorbs gamma rays, preventing them from affecting life on Earth. Because gamma rays cannot penetrate Earth's atmosphere, scientists use satellites in space to study them.
Answer:
Explanation:
because gamma rays have so much energy they could harm people on earth
How much energy has 4×10^10m^3 of water collected in a reservoir at a hight of 100 m from the power house ?What kind of energy is that?
Answer:
PE = 3.92x10^16J
potential energy
Explanation:
PE = m*g*h
mass of water = 1000kg/m³
(4*10^10m³)*1000kg = 4*10^13kg
PE = (4*10^13kg)*(9.81m/s²)*(100m)
PE = 3.92x10^16J
help please correct answer i will mark brainliest
Answer:
19.21ms-¹
Explanation:
that is the solution above
Margy is trying to improve her cardio endurance by performing an exercise in which she alternates walking and running 100.0 m each. If Margy is walking at 1.4 m/s and accelerates at 0.20 m/s2 during
Complete question is;
Margy is trying to improve her cardio endurance by performing an exercise in which she alternates walking and running 100.0 m each. If Margy is walking at 1.4 m/s and accelerates at 0.20 m/s² during one of the running portions, what is her final velocity at the end of the 100.0 m? Round your answer to the nearest tenth.
Answer:
6.5 m/s
Explanation:
We are told that she is walking at 1.4 m/s and accelerates at 0.20 m/s².
Thus;
Initial velocity; u = 1.4 m/s
Acceleration; a = 0.2 m/s²
Distance; s = 100 m
From Newton's equation of motion, we know that;
v² = u² + 2as
Where v is final velocity.
Thus;
v² = 1.4² + 2(0.2 × 100)
v² = 41.96
v = √41.96
v ≈ 6.5 m/s
When a rope is wrapped around a wheel (or pulley) and pulled, the lever arm is the ________ Blank 1 of the wheel and the angle between this and the force is ALWAYS ________ degrees. Blank 2
Answer:
the DISTANCE between the lever arm and the force is always 90º
Explanation:
In this exercise, you are asked to complete the missing words so that the phrase makes sense.
note that the torque is
τ = F x r
where bold indicates vectors
When the rope is pulled, the DISTANCE between the lever arm and the force is always 90º
What are the fundamental units involved in a unit of the given derived quantities
Density
Acceleration
Force
Pressure
Work
Answer:
Density → Mass and Length.
Acceleration → Length and Time.
Force → Mass, Length and Time.
Pressure → Mass, Length and Time.
Work → Mass, Length and Time.
12.
A solar heater uses energy from the Sun to heat water. The panels of the heater are painted black.
Why is this?
Answer:
Solar water heaters are devices that use energy from the sun to heat water. ... This metal surface, placed in contact with the water, will heat the water. Black-painted surfaces that receive the sun's heat become hotter than surfaces of any other color. The black metal plate is called a collector.
Please help me. Please help me.
Answer:
Make a nice powerpoint and think about the question
Explanation:
Its easier than you think :)
Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions.
Which is the best analysis of Eli’s statement?
The question is incomplete, the complete question is;
Eli states that sodium phosphate is a mixture because it is composed of both sodium ions and phosphate ions. Which is the best analysis of Eli’s statement? It is correct because each ion is a pure substance, so sodium phosphate is made up of two pure substances. It is correct because the composition of sodium phosphate changes depending on the sample. It is incorrect because sodium phosphate is a compound that has a single composition. It is incorrect because the two types of ions in sodium phosphate cannot be seen.
Answer:
It is incorrect because sodium phosphate is a compound that has a single composition
Explanation:
A compound is a neutral substance made up of two or more atoms which are chemically combined together.
Ionic substances are made up of ions. These ions are not separate entities, they are part of the compound.
Hence, Eli's statement is incorrect because sodium phosphate is a compound that has a single composition.
Why is it extremely dangerous to attempt to carry out a distillation in a completely closed apparatus
Answer:
The main reason is to avoid explosion
Explanation:
When we carry out distillation process, it will get to a point where gases/steam are released due to evaporation, if we do not create a channel for exit they will build up in the apparatus and will ultimately lead to explosion
Define ELASTIC LIMIT, YIELD POINT AND ULTIMATE TENSILE STRENGTH?
[tex] \green{\huge{\red{\boxed{\green{\mathfrak{QUESTION}}}}}} [/tex]
ELASTIC LIMIT, YIELD POINT AND ULTIMATE TENSILE STRENGTH.
[tex] \orange{\underline{\huge{\bold{\textit{\green{\bf{TOPIC}}}}}}} [/tex]
Mechanical Properties Of Solid.
[tex] \huge\green{\boxed{\huge\mathbb{\red A \pink{N}\purple{S} \blue{W} \orange{ER}}}}[/tex]
[tex] \bold{ \green{PART \: \: (1):-}} \\ \bold \green {{ ELASTIC \: \: LIMIT}}[/tex]
It is also called yield point
In this limit, energy provided to the material to cause deformation when removed then the material returns to its own shape and size.
In this limit each body shows elastic nature
[tex] \bold{ \red{PART \: \: (2):-}} \\ \bold \red {{YIELD \: \: STRENGTH}}[/tex]
It is the fix amount of the energy which causes fixed permanent set of deformation.
In this body shows plastic deformation.
The level of stress that corresponds to the yield point is referred to as the yield strength of the material.
[tex]\bold{ \purple{PART \: \: (3):- \:ULTIMATE }} \\ \bold \purple {{TENSILE \: \: STRENGTH}}[/tex]
It is the amount of the stress which causes permanent set of deformation after the yield point.
Body show perfect plastic deformation.
This shows a permanent set of deformation.
[tex] \red \star{Thanks \: And \: Brainlist} \blue\star \\ \green\star If \: U \: Liked \: My \: Answer \purple \star[/tex]
A neutral object must have _______________ A. An equal amount of positive and negative charges B. no charges present at all C. more positive than negative charges D. more negative than positive
Answer:
A
Explanation:
Consider a question you may not have considered before. Suppose you have a mole of sodium in a container that contains nothing that it will react with. A mole of anything is 6.02 * 10^23 (in this case atoms).
Suppose that every one of those atoms has contributed 1 electron to something.
Do you think it would be safe to touch the container knowing that there are 6.02 * 10^23 positive charges all eager to get another electron, because they don't like repelling each other.
Safe or not? I'll give you a hint. A lightning bolt does not contain anywhere near 6.02*10^23 charges. No where near.
So -- since you never get a shock from just touching anything, There must not be electrons or ions present.
The answer is A
A train travelling at 20m/s accelerate at 0.5m/s2 for 30 seconds. How far will it travel in this time?
Answer:
825m
Explanation:
u=20m/s
a=0.5m/(s)^2
s = ut + 1/2a(t)^2
s = 20(30) + 1/2(0.5)(30)^2
s = 600 + 225
s = 825m
Answer:
as we know that
S=ut+1/2(at*t)
S=20*30+1/2(0.5*30*30)
S=600+225
S=825
Explain how you can use the factors of production to produce a fruit juice in a production company
Answer:
The factors of production include Land, Labour, Capital and Enterpreneurship
Explanation:
The fruit could be apple, orange , pineapple etc which are usually grown on land . They are tended to by people to ensure there is maximum yield. These people provide the required labour needed.
The cost of planting and payment of workers usually comes from the capital which is often used in running the business by the owner which makes certain decisions to ensure the fruit company is in place. All these factors work hand in hand to ensure production of fruit in a production company is possible.
The chart shows the speed at which light travels through different media.
In which medium would light have the longest wavelength?
- Water
- Air
- Glass
- Diamond
Answer:
Air.
Explanation:
To know which option is correct, let us consider the relationship between velocity and the wavelength of a wave. This is illustrated below:
Velocity, wavelength and frequency are related by the following equation:
Velocity = wavelength × frequency
v = λf
From the equation above, we can see clearly that the velocity is directly proportional to the wavelength.
This means that an increase in the wavelength will lead to an increase in the velocity and also, a decrease in the wavelength will lead to a decrease in the velocity.
Now, considering the table given in the question above, we can see that the wave has a higher speed in air. This simply means that the wave will also have a higher wavelength in air.
Thus, the correct answer to the question is: air
NEED THIS ASAP
Ariana is accelerating her car at a rate of 4.6 m/s2 for 10 seconds. Her starting velocity was 0 m/s.
What was her final velocity?
0 m/s
2.3 m/s
4.6 m/s
46 m/s
Answer:
46
Explanation:
v = at so 4.6 x 10 = 46
Please help it's for a test that is due right now.
A car of mass 1000kg is traveling 30m/s
a) What is the kinetic energy?
b) How high will it have to travel up a hill to have the same potential as kinetic energy as this speed? Remember Ep-Ek
Answer:
a. 15,000J
b. .76m
Explanation:
KE = (1/2)m*v²
KE = .5*1000kg*30m/s
KE = 15000J
PE = m*g*h
7500J = 1000kg*9.81m/s²*h
7500J = 9810*h
h = .76m
What is pulling force? Give any two examples.,
Answer:
Push or Pull Forces - example
When you push against a wall the force that you exert is an example of a push force. When you pull a trolley car the force that you exert is an example of pull force.
Which part of this model represents a layer made of liquid rock that produces
a magnetic field?
A. B
B. A
C. D
D. C
Answer: C- the outer core
Explanation: The outer core is a thick layer of molten rock that encircles the inner core.
action and reaction are equal in magnitudeand opposite in direction then why do they not balance each other ?
Because they act on different objects.
For taking bath, water at 40⁰C is required. Calculate the mass of cold water at 15⁰C which is to be added in 60 Kg water at 100⁰C for bathing purpose. 1 point a) 51Kg b) 47Kg c) 44 Kg d) 39Kg
A battery of emf 5V and internal resistance 2ohm is joined to a resistor of 8ohm.Calculate the terminal potential difference.
Answer:
4V
Explanation:
First, we calculate the total resistance to the given battery cell of emf 5V. The total resistance is the sum of all the resistance in the cell i.e.
Total resistance = 2Ω + 8Ω = 10Ω
Using ohms law equation to calculate the current passing through the battery cell:
V = IR
Where; V = voltage, I = current, R = resistance
5V = I × 10Ω
I = 5/10
I = 0.5A
Terminal voltage is calculated by the us of the following equation:
V=emf−IR
Where; R is internal resistance
V = 5 - (0.5 × 2)
V = 5 - 1
V = 4V
Therefore, the potential difference across the terminals of the battery cell is 4V
A boy travels 12km east wards to a point B and then 5km southwards to another point C. Calculate the difference between the magnitude of the displacement of the boy and the distance travelled by him.
Explanation:
pls mark me as brainliest
If a boy travels 12 km eastwards to a point B and then 5km southwards to another point C, then the difference between the magnitude of the displacement of the boy and the distance traveled by him would be 4 kilometers.
What is displacement?An object's position changes if it moves in relation to a reference frame, such as when a passenger moves to the back of an airplane or a professor moves to the right in relation to a whiteboard. Displacement describes this shift in location.
As given in the problem a boy travels 12km eastwards to a point B and then 5km southwards to another point C.
Distance traveled = 12 + 5 = 17 km
The displacement = √ ( 12² + 5² )
= 13 km
Thus, If a boy travels 12 km eastwards to a point B and then 5km southwards to another point C, then the difference between the magnitude of the displacement of the boy and the distance traveled by him would be 4 kilometers.
To learn more about displacement here, refer to the link given below;
https://brainly.com/question/10919017
#SPJ2
A lamp is connected to a 230 V mains supply. A current of 4 A flows through the lamp for 30 seconds.
Answer:
The energy dissipated is 27600 J.
Explanation:
Voltage, V = 230 V
Current, I = 4 A
time, t = 30 s
The energy is given by
E = V I t
E = 230 x 4 x 30
E = 27600 J
