Answer:
Technically a microorganism or microbe is an organism that is microscopic. The study of microorganisms is called microbiology. Microorganisms can be bacteria, fungi, archaea or protists. The term microorganisms does not include viruses and prions, which are generally classified as non-living.
Which 3 organisms feed on dead matter and waste products?
Earthworm
Ladybug
Fungi
Mice
Bacteria
Answer:
mice
bacteria
fungi
Explanation:
that's the answer
Substances with a high polarity have a(low/high) surface tension ?
Answer:
I think they have high, because the nonpolar molecules usually have a much lower surface tension than polar ones.
What BEST describes these three molecules?
Which ionic equation describes a redox reaction? A. Ag(+) + Cl- = AgCl B. 2H(+) + CO3(2-) = CO2 + H2O C. H(+) + OH(-) = H2O D. Zn + Cu(2+) = Zn(2+) + Cu The marking scheme of the past paper this question is from says that the answer is D but how?
Answer: The correct option is D. [tex]Zn+Cu^{2+}\rightarrow Zn^{2+}+Cu[/tex]
Explanation:
Redox reaction is defined as the reaction in which oxidation and reduction take place simultaneously. It is known as the reaction in which the exchange of electrons takes place.
The oxidation reaction is defined as the reaction in which a chemical species loses electrons in a chemical reaction. It occurs when the oxidation number of a species increases.
A reduction reaction is defined as the reaction in which a chemical species gains electrons in a chemical reaction. It occurs when the oxidation number of a species decreases.
From the given ionic reactions:
[tex]Zn+Cu^{2+}\rightarrow Zn^{2+}+Cu[/tex]
On the reactant side:
Oxidation number of Zn = 0
Oxidation number of Cu = +2
On the product side:
Oxidation number of Cu = 0
Oxidation number of Zn = +2
As the oxidation number of Zn is increasing from 0 to +2. Thus, it is getting oxidized. Similarly, the oxidation number of Cu is decreasing from +2 to 0. Thus, it is getting reduced. Therefore, forming a redox couple
Hence, the correct option is D. [tex]Zn+Cu^{2+}\rightarrow Zn^{2+}+Cu[/tex]
Which method is best suited for separating a 500 mL sample of two miscible liquids whose boiling points differ by approximately 60°C?
A) use of a separators funnel
B) paper chromatography
C) evaporation
D) distillation
E) fractional distillation
In your OWN words explain how season are formed
Answer: Weather currents change wind tempature and there for change the weather of the seasons.
There are on average 43 g of sugar and 355 mL can of soda please calculate the molarity of sugar in the can of soda the molar mass of sugar is 342.2 g/mol
Explanation:
Given :
Amount of solute - sucrose (C12H22O11) = 41 g
Amount of solvent -soda = 355-mL
Molarity of the solution with respect to sucrose= ?
Molarity(M) is a unit of concentration measuring the number of moles of a solute per liter of solution. The SI unit of molarity is mol/L.
Formula to find the molarity of solution :
Molarity =
Amount of solvent is given in mL, let’s convert to L :
1 L = 1000 mL
Therefore, 355 mL in L will be :
= 0.355 L
We have the amount of solute in g, let’s calculate the number of moles first :
Number of moles (n) =
Molar mass of C12H22O11 = 342.29 g/mol.
Therefore, n =
= 0.119 moles.
Place the following in increasing atomic radius:
Least to most
Explanation:
least= Li,F,N,He,Ca,O
medium=N,Br,K,Ne,Zn,Fr
most= F,I,K,Kr,Br,Ga
What point A on the phase diagram called?
liquid
(374°C/218 atm)
A
solid
pressure (atm)
gas
temperature (°C)
OA.
the melting point
OB.
the boiling point
Ос.
the freezing point
OD
the critical point
OE.
the triple point
Answer:
D) the critical point
Explanation:
Point A is the critical point in phase diagram. This is the highest temperature and pressure at which a pure material can exist in vapor/liquid equilibrium. Pretty cool!
How much energy does a 930 nm wave of light have? (The speed of light in a vacuum is 3.00 x 108 m/s, and Planck's constant is 6.626 x 10-34 J·s.)
A. 4.68 x 10^18 J
B. 2.14 x 10^-19 J
C. 1.85 x 10^-31 J
D. 4.21 x 10^35 J
Answer:
B. 2.14 x 10^-19 J
Explanation:
The energy of a wave of light can be obtained using the equation:
E = h*c/λ
Where E is the energy in joules,
λ is wavelength = 930nm = 930x10⁻⁹m
h = Planck's constant = 6.626x10⁻³⁴Js
c = Speed of light = 3.00x10⁸m/s
Replacing:
E = 6.626x10⁻³⁴Js*3.00x10⁸m/s/930x10⁻⁹m
E = 2.14x10⁻¹⁹J
Right option is:
B. 2.14 x 10^-19 J
why elements with more than 20 protons always have a more neutrons than protons?
Answer:
Elements that have atomic numbers from 20 to 83 are heavy elements, therefore the ratio is different. The ratio is 1.5:1, the reason for this difference is because of the repulsive force between protons: the stronger the repulsion force, the more neutrons are needed to stabilize the nuclei.
SOMONE HELP DUE IN 5 MINUTES
Answer:
Silicon
Explanation:
Nucleus
14 protons
Group 14
Number 14
+4, +2, or -4
Answer:
Explanation:
Name of the part of this atom labeled z is nucleus.
number of protons is 14 .
the given element is silicion and it lies in group 14.
the no of period that contains this element is 3.
charge formed on the ion formed from this atom is positive charge because it gives 4 electron to other element .
If the element gains the electron then it has negative charge where as when it loses it will have positive charge.
Match each word to its correct meaning. 1. carbon sequestration carbon dioxide, water vapor, methane, nitrogen oxides, and some CFCs that absorb heat and keep it in the earth's atmosphere 2. greenhouse effect technology used to capture the carbon released from smokestacks and store it in some part of the environment to keep it out of the atmosphere 3. greenhouse gas a term used to describe the role that greenhouse gases play in keeping the earth warm
Answer:
1. Greenhouse gas.
2. Carbon sequestration.
3. Greenhouse effect.
Explanation:
Greenhouse gases can be defined as gases that trap heat within the Earth's atmosphere. Thus, an increase in global temperature is largely caused due to an increase in the amount of greenhouse gases in Earth's atmosphere.
Some examples of greenhouse gases present in the atmosphere are methane, water vapor, carbon dioxide etc.
Matching the descriptions with their term respectively, we have;
1. Greenhouse gas: carbon dioxide, water vapor, methane, nitrogen oxides, and some CFCs that absorb heat and keep it in the earth's atmosphere
2. Carbon sequestration: it's a technology used to capture the carbon released from smokestacks and store it in some part of the environment to keep it out of the atmosphere. Thus, it's a process that is typically used for capturing and the long-term storage of atmospheric carbon dioxide in soil, ocean, plants and geologic formation, so as to reduce global warming or climate change.
3. Greenhouse effect: it's a term used to describe the negative role that greenhouse gases such as methane, water vapor, carbon dioxide etc., play in keeping the earth warm.
Select the correct answer.
Which atom or lon is the largest?
Answer:urenium
Explanation: because his atomic number is 235
Answer:
We know when the no of protons (+ charge) is greater than the no of electrons (- charge), the nucleus pulls the electrons with greater force, hence making the size smaller. Clearly, the cations are smaller than the atoms, this largest atom/ion will be Ca.
K has 19 protons, 19 electrons
K+ has 19 protons, 18 electrons
Ca has 20 protons, 20 electrons
Ca2+ has 20 protons, 18 electrons
Li has 3 protons, 3 electrons
Clearly, the cations are smaller than the atoms, this largest atom/ion will be Ca.
Explanation:
How many electron containing orbitals are in an atom of tin ?
Answer:
10
Explanation:
how many electron-containing d orbitals are there in an atom of tin? name the element in the 4th period whose atoms have the same number of highest-energy-level elctrons as tin
10, germanium
Two or more than two atoms with different physical or chemical properties can not combine together to form an element. Therefore, the total number of orbitals containing electrons in an atom of tin are 10 orbitals.
What is element?Element generally consist of atoms or we can atoms combine to form element. Atoms of an element is always same, means all the properties of all atoms of one type of element is same.
The electronic configuration of tin is 1s² 2s² 2p⁶ 3s²3p⁶ 4s² 3d¹⁰ 4p⁶ 5s²4d¹⁰ 5p² or [Kr] 5s² 4d¹⁰ 5p². The total number of orbitals containing electrons in an atom of tin are 10 orbitals. tin an element that belongs to p block of periodic table.
Therefore, the total number of orbitals containing electrons in an atom of tin are 10 orbitals.
To know more about element, here:
https://brainly.com/question/8460633
#SPJ2
PLZ HELP!!! QUESTIONS ARE BELOW!!! :D PLZ COMPLETELY ANSWER THE QUESTIONS WITH A GOOD ANSWER :)
Answer: sorry its lagging i hope this help fore 18.. =D
Explanation:
n,s is repeating the cycle of the inside
Answer/Explanation:
18, a,
I believe the n, and s represents North, South, or just the way the arrows are rotating repeatedly.
18, b,
The phenomenon re-occurring shows the alignment of magnetic dipoles with in a magnet, like inside. The arrows show a direction in the line with an external magnetic field in a way that it can produce its own magnetic fields that seem to travel from North to the South.
18, c,
Incorrect. Refrigerator magnets have multiple layers of magnification, they use opposite polarities to stay this way. If he puts the magnet sideways it may stick to the fridge
~ LadyBrain
Which particles are attracted as a result of the electrostatic force?
A. Protons and electrons
B. Any particles that have mass
C. Any particles that have like charges
D. Protons and neutrons
Answer:
A. Protons and electrons
Una muestra de 2,5000 (g) de piedra caliza, se disuelve y se precipita el Calcio como oxalato de Calcio (CaC2O4), este precipitado se calcina transformándose en Carbonato de Calcio (CaCO3). El peso de este compuesto es de 1,2093 (g). Calcular el % de Calcio en la muestra
Answer:
[tex]\%Ca=19.378\%[/tex]
Explanation:
¡Hola!
En este caso, basado en la información dada, es posible conocer la masa de calcio en carbonato de calcio, que de hecho es la misma en la muestra, al utilizar el siguiente esquema de cálculo:
[tex]m_{Ca}=1,2093gCaCO_3*\frac{1molCaCO_3}{100.1gCaCO_3}*\frac{1molCa}{1molCaCO_3}*\frac{40.1gCa}{1molCa}\\\\m_{Ca}=0.48444gCa[/tex]
Finalmente, calculamos el porcentaje requerido como sigue:
[tex]\% Ca=\frac{0.48444g}{2.5000g} *100\%\\\\\%Ca=19.378\%[/tex]
¡Saludos!
State the method you will use to separate the following substances. (a) calcium carbonate from table salt (b) iodine from sodium chloride (c) table salt from seawater (d) sugar from sugar solution (e) pure water from sewage water (f) ethanol from beer (g) yellow dye from durian ice cream
Answer:
https://www.meritnation.com :)I HOPE IT'S HELP
Answer: There are many forms of table salt: coarse salt, refined salt, iodized salt. It is a crystalline solid, white to very pale pink or gray in color, obtained from seawater or salt deposits. Salt obtained from seawater has crystals that are smaller or larger than rock salt. In nature, table salt consists mainly of sodium chloride (NaCl), but also a few other minerals (trace minerals). Table salt obtained from rock salt may appear more gray because of traces of trace minerals. Table salt is necessary for the survival of all living organisms, including humans. Table salt is involved in regulating the body's water content (liquid balance).
How many mL of 0.013 M potassium hydroxide are required to reach the equivalence point in the titration of 75 mL 0.166 M hydrocyanic acid?
Answer:
957.7mL
Explanation:
Using the formula below;
CaVa = CbVb
Where;
Ca = concentration of acid (M)
Va = volume of acid (mL)
Cb = concentration of base (M)
Vb = volume of base (mL)
According to the information provided in this question:
Ca = 0.166 M
Cb = 0.013 M
Va = 75mL
Vb = ?
Using CaVa = CbVb
0.166 × 75 = 0.013 × Vb
12.45 = 0.013Vb
Vb =12.45/0.013
Vb = 957.7mL
Calculate the heat energy, in kJ, required to melt 1.0kg of ice at 0 degrees celcius.
Show all working out
Answer:
here is the answer. Feel free to ask for more chem help <3
The temperature of a sample of liquid water changes from 50°C to 30°C. Which statement best explains the change
that must happen at the molecular level?
The molecules move more quickly and their average kinetic energy increases
The molecules move more bowly and their average kinetic energy decreases
The molecules move more quickly and their average kinetic energy decreases
The molecules move more slowly and their average kinetic energy increases.
Answer:
The molecules move slower than the temp of 50°c and their average kinetic energy decreases.
Explanation:
kinetic energy cannot increase as temperature is reduced. molecules will still move with reduced motion.
please i need help ……
Answer:
H2
Explanation:
(l) means liquid
(s) means solid
(g) means gaseous
I hope this helped [:
heyoo I need help pleaseeeeee
c) Current cannot flow
Reason: Because the switch is not closed.
Answer:
current can't flow
Explanation:
by the way of explanation it is open circuit in which the current flow whereas in closed circuit the current flow.
if you like my answer please mark as brainlist.
it will be too much help for me.
Which statement best describes wave-particle duality as it applies to electrons?
A. The electrons present in radio waves and microwaves act more like particles than waves.
B. Electrons are particles that emit waves of radiation when they move from higher energy levels to lower energy levels.
с.Electron clouds can be understood as clumps of particles held near one another by wave forces.
D.Electrons can be modeled as waves in some situations and as particles in other situations.
Answer:
D es pero que te ayude amigo
1.1 Define the concept risky behaviour?
Answer:
Risky behavior or risk-taking behavior is defined according to Trimpop (1994) as “any consciously, or non-consciously controlled behavior with a perceived uncertainty about its outcome, and/or about its possible benefits, or costs for the physical, economic or psycho-social well-being of oneself or others.” In addition to this broad definition, there are other definitions of risky behavior depending on the field of research. While in the economic view, risk is defined in terms of the variability of possible monetary outcomes, in the clinical literature, the risk is generally defined as exposure to possible loss or harm (Schonberg, Fox, & Poldrack, 2011). Turner et al. (2004) described risk-taking behavior further as either a socially unacceptable volitional behavior with a potentially negative outcome in which precautions are not taken, such as speeding, drinking and driving, drugs abuse, unprotected sex and so on.
Boyle's Law Problems
Charles' Law Problems
Answer:
here are the answers babe. Feel free to ask for more
HELP! HELP! Calculate the value of ΔS⁰ at 298 K.
Answer:
ΔS⁰ = -181.1J/molK
Explanation:
ΔS⁰ of a reaction is defined as the sum of the entropies of the reactants times its reaction coefficient minus the sum of the entropies of the products times its reaction coefficient. For the reaction in the problem:
ΔS⁰ = 2*S{NaCl(s)} - (2*S{Na(s)}+S{Cl2(g)})
ΔS⁰ = 2*72.1J/molK - (2*51.1J/molK + 223.1J/molK)
ΔS⁰ = -181.1J/molKHelp, quick, pls
What is a displacement reaction?
[tex]\begin{aligned} -5x+4y &= 3\\\\ x&=2y-15 \end{aligned}[/tex]
If one of the reactants in a reaction us Na2O, what is known about the products?
Ok here's the deal
the answer is A: The products will contain exactly 2 Na atoms and 1 O atom.
Explanation:
thank me later space-ex kids
