What is ozone hole?
What causes an ozone hole?

Answers

Answer 1

Answer:

Ozon prevents us from UV rays of the sun. Ozone hole means that UV rays are entering the Earth. This results in cancer.

Explanation:

Chlorofluorocarbons are causing this

Answer 2

Answer:

The term ‘ozone hole’ refers to the depletion of the protective ozone layer in the upper atmosphere (stratosphere) over Earth's polar regions. People, plants, and animals living under the ozone hole are harmed by the solar radiation now reaching the Earth's surface—where it causes health problems, from eye damage to skin cancer.

Ozone depletion occurs when chlorofluorocarbons (CFCs) and halons—gases formerly found in aerosol spray cans and refrigerants—are released into the atmosphere.


Related Questions

Please answer the question ​

Answers

Answer:

Oxygen is the nearest noble gas

is it true that the most reactive metals are quite plentiful in the Earth's crust?​

Answers

Answer:

yes

Explanation:

as it had got crushed down in the dinosaurs age

An atom has an atomic number of 19 and mass number of 39 how many electrons and protons does it have? ​

Answers

Answer:

19 protons, 20 neutrons and 18 electrons.

Explanation:

The atomic number gives the number of protons 19

p = 19

The atomic mass is the sum of the protons and neutrons

p + n = 39   p = 19

put p into the equation and solve for n the neutrons.

19 + n = 39

Subtract 19 from both sides

19 − 19 + n = 39 − 19

n = 20

The number of electrons equals the number of protons in a neutral atom. The positive charge equals the negative charge. The negative charge is the number of electrons. This ion has a charge of +1. So solve for the negative charge.

− 19 + 1 = − 18

The negative charge is -18 so

e = 18

PLEASE HELP ASAP Put these events in order, from earliest to latest.
-the first fusion bomb is tested
-uranium atoms are split
-atomic bombs are dropped on Japan at the end of world war ll
-the first nuclear-powered submarine is put into action
-Enrico fermi creates the first known nuclear chain reaction

Answers

Answer:

1) Uranium atoms are split

2) Enrico Fermi creates the first known nuclear chain reaction

3) Atomic bombs are dropped on Japan at the end of WWll

4) The first fusion bomb is tested

5) The first nuclear-powered submarine is put into action

Which describes the molecule below?
O
A. A lipid with three unsaturated fatty acids
O
B. A lipid with three saturated fatty acids
O C. A lipid with two unsaturated fatty acids and one saturated fatty
acid
O D. A lipid with two saturated fatty acids and one unsaturated fatty
acid

Answers

The molecule is described as the, A. lipid with three unsaturated fatty acids.

A collection of two or more atoms bonded together by attractive forces known as chemical bonds is referred to as a molecule. In the given question, the molecule shown in diagram is a lipid, or triglyceride, with three fatty acids and a glycerol backbone. Unsaturated fatty acids are those with double or triple bonds in their molecular makeup.

Depending on how many double or triple bonds are typically there in its structure, a fatty acid can either be polysaturated or monounsaturated. Generally, there are three unsaturated fatty acids in this lipid, all of which contain one double bond in their structures.

Read more about molecule on:

https://brainly.com/question/30337264

#SPJ1

Which statements are correct regarding the Law of Conservation of Matter and Energy?

Matter or energy can create itself.
Matter or energy was created by known principles of physics and chemistry.
Matter or energy can change from one form to the other.
The law agrees with the Biblical account of Creation
(more than one answer)

Answers

Answer:

Matter or energy can change from one form to the other

Explanation:

The law of conservation of energy states that energy can neither be created nor destroyed but can only be transformed i.e. changed from one form to another. For example, mechanical energy can be changed to electrical energy.

Likewise, the law of conservation of mass/matter states that matter can not be destroyed or created but can change via physical or chemical means to conserve it. For example, matter can change from liquid state to gaseous state.

From the above two laws, it can be said that "matter or energy can change from one form to the other".

Define the boiling and evaporation using kinetic theory

Answers

Answer:

Explanation:

By the kinetic molecular theory (particle model), all matter consists of particles, there are spaces between the particles, the particles are in constant random motion, and there are forces of attraction and repulsion between the particles.

Furthermore, temperature is defined to be a measure of the average kinetic energy of the particles.

Evaporation is a change of phase from liquid to gas explained as follows :

When particles in the liquid phase are heated, they gain kinetic energy and move faster and further apart. Eventually they have enough energy to escape the forces of attraction holding them together in the liquid phase and they move very fast and far from each other and exist in the gaseous phase.

A student who is performing an experiment must measure out 0.02-mL of 0.50-M HCl. The most accurate piece of equipment to measure the quantity would be a?


A) 50 mL buret

B) 25 mL graduated cylinder

C) 10 mL cylinder

D) 1 mL pipet

Answers

Answer:

Choice D) 1 mL pipet

Explanation:

If you are trying to extract 0.02 mL of HCl, you are going to need a piece of equipment that can measure very small units. Thus, Choice D would be the correct answer.

URGENT HELP
26. A solution of hydrogen peroxide is 23.3% H2O2 by mass and has a density of 1.11
g/cm”. The molarity of the solution is:
a) 7.14 M
b) 0.259 M
c) 7.60 M
d) 7.93 M
e) none of these

Answers

The answer is option C 7.60 M

SOMEONE HELP chemistry

Answers

Calculate the molar masses of H2O and CuSO4 (Relative atomic masses: H=1, O=16, S=32, Cu=64)

Calculate the mass of water driven off, and the mass of anhydrous copper(II) sulfate formed in your experiment

Calculate the number of moles of anhydrous copper(II) sulfate formed

Calculate the number of moles of water driven off

Calculate how many moles of water would have been driven off if 1 mole of anhydrous copper(II) sulfate had been formed

Write down the formula for hydrated copper(II) sulfate.

AMSWER IN THE ATTACHMENT.

Some one help me with these real quick I need help with questions 4 & 6.!

Answers

Answer:

4 is chemical and 6 is a

Explanation:

hope this helps

In vascular plants, the absorption of water from the soil into root hairs depends principally upon the presence of a
A. phototropic response by the root hairs
B. geotropic response by the conducting tissue
OOOO
C. higher concentration of water in the soil than in the root hairs
D. higher concentration of water in the root hairs than in the soil

Answers

Answer:

the answer is C) higher concentration of water in the soil than in the root hairs

Explanation:

Answer:

the answer is c

Explanation:

i just got it

In the chemical reaction between aqueous magnesium chloride and sodium metal, what chemical amount (mol) of magnesium metal can be precipitated (produced) with 12.6 mol of sodium metal?

Answers

Answer:

6.3moles

Explanation:

The balanced equation of the reaction described above between aqueous magnesium chloride and sodium metal is as follows:

MgCl2(aq) + 2Na(s) → 2NaCl(aq) + Mg(s)

From the above equation, 2 moles of sodium metal (Na) produces 1 mole of Magnesium metal (Mg)

Hence, 12.6 mol of Na will produce (12.6/2) mol of Mg.

12.6/2 = 6.3moles of Mg metal.

sucrose (sugar)crystals obtained from sugarcane and bet root are mixed together .with it be a pure substancesor a mixture ?give reasons​

Answers

Answer:

It will be a pure substance (compound) because chemical composition of sugar crystals will be the same whether obtained from sugarcane or from beet root.

hope it's help you plz mark as brain list ...!!


4 Calculate the mass of tin that can be extracted from 100 kg of tin ore that contains
1% tin by mass. Calculate the mass of waste produced.

Answers

Answer:

formula for calculating mass is

first U will HV to find number of moles

m=n×M

The reactants of two chemical equations are listed.

Equation 1: CuSO4 and NaOH
Equation 2: Fe and CuSO4

Based on the type of reaction, which reaction can be used to extract copper metal from copper sulfate solution?

A - Equation 2, because Fe being more reactive, replaces Cu from CuSO4
B - Equation 2, because Fe being more reactive, replaces S from CuSO4
C - Equation 1, because Na being more reactive, exchanges position with Cu in CuSO4
D - Equation 1, because Na being more reactive, exchanges position with S in CuSO4

Answers

The reaction that can be used to extract copper metal from copper sulfate solution would be equation 2.

Fe will displace Cu from CuSO4 because it is more reactive. In other words, Fe ranks higher than Cu in the reactivity series.

Thus:    [tex]Fe + CuSO_4 ---> Cu + FeSO_4[/tex]

Even though Na will displace Cu from CuSO4, equation 1 will result in the formation of Cu(OH)2 instead of free Cu because it is a double replacement reaction.

More on copper production can be found here: https://brainly.com/question/13677872?referrer=searchResults

Question 24 Multiple Choice Worth 2 points)
[BWS.02] Why is science important for society?

Answers

Answer:

Because the scientific knowledge itself helps solve many basic human needs and it also improves how humans live and their standards. For example, without science medications wouldn´t exist and many technological devices we use now-a-days. We´re surrounded by science, we just don´t really notice it.

Please help please help

Answers

Answer:

sry I don't know much about chemistry

Its 60.7% because the total mass of NaCl is 58.5g and chlorine only costitute of the 35.5g. So its mas of chlorine over total mass x 100

List the two pairs of atoms referred to in the
previous question in order of increasing ionic
character of the bonding between them.

Answers

Chemical bonding and Covalent bong

Increasing the concentration increases the speed of reaction by... increasing the number of collisions between products increasing the amount of energy in the system increasing the number of collisions between reactants lowering the activation energy of the reaction

Answers

Answer: increasing the number of collisions between reactants

Explanation:

A reaction is possible due to collisions between the reactants to create products. If we increase the concentration of reactants then that means that we are increasing the molecules of the reactants which would give them more chances to collide and make products.

For instance, using a non-chemistry example, if there are few cars in a large city, the accidents there will be less because the cars will have such space that they wouldn't collide with each other. If the number of cars in the city is increased however, there is now less space and more chances for cars to collide.

In some chemical reactions, such as photosynthesis, several different compounds take part in the reaction. How do you think that atoms present at the end of this kind of reaction compare to the atoms present at the beginning of the reaction? Explain.

Answers

Answer:

The atoms present at the beginning of the reaction is equal to the atoms present at the end of the reaction. This is because matter can neither be created nor be destroyed in an ordinary chemical reaction.

Explanation:

During photosynthesis, 6 molecules of water react with 6 molecules of carbon dioxide to form 1 molecule of glucose and 6 molecules of oxygen. The equation for the photosynthesis reaction is

6CO2 + 6H2O --> C6H12O6 + 6O2

At the beginning of the reaction, there is 6 carbon atoms, 18 oxygen atoms and 12 hydrogen atoms while at the end of the reaction, there is 6 carbon atoms, 12 hydrogen atoms and 18 oxygen atoms.  This is because according to the law of conservation of mass and matter, it can neither be created nor be destroyed in an ordinary chemical reaction. The number of atoms present at the beginning of the reaction must be equal to the number of atoms present at the end of the reaction.


Please help please help

Answers

Answer:

The mass percentage of chlorine is 60.66 % chlorine in the compound sodium chloride.

Explanation:

When an Li atom becomes an Li+ ion, the Li atom

Answers

Answer:When a lithium atom forms an Li+ ion, the lithium atom (1) gains a proton (2) gains an electron (3) loses a proton (4) loses an electron

Which of the following would be expected to have the lowest boiling point?
CH3CH2CH2CH3, CH3CH2NHCH3, NH2CH2CH2NH2, CH3CH2CH2NH2


O CH3CH2NHCH3
O NH2CH2CH2NH2
O CH3CH2CH2NH2
O CH3CH2CH2CH3

Answers

Answer:

CH3CH2CH2CH3

Explanation:

The boiling point of a compound depends on the nature of intermolecular interaction between the molecules of the compound.

If a molecule is nonpolar and has a low molecular mass, then its molecules are most likely held together only by weak intermolecular bonds such as dispersion forces. These forces are easily broken and the molecules move apart hence the molecule possess a low boiling point.

Polar molecules and molecules having higher molecular mass tend to have higher boiling points.

Among all the compounds listed, CH3CH2CH2CH3 is non polar and has the lowest molecular mass hence it exhibits the least boiling point.

In the reaction
Cu° + 2 H2SO4 → CuSO4 + 2 H2O + SO2,
copper is
A) reduced and is the oxidizing agent
B) reduced and is the reducing agent
C) oxidized and is the oxidizing agent
D) oxidized and is the reducing agent

Answers

Copper is D) oxidized and is the reducing agent

EXPLANATION: Copper goes from a charge of 0 in Cu to +2 in CuSO4 so it is oxidized. A reducing agent is the substance being oxidized.

Cierta cantidad de gas ocupa 20 litros sometido a una presión de 1,5 atmósferas. Si lo comprimimos hasta 6 atmósferas, ¿qué volumen ocupará?

Answers

Respuesta:

5 L

Explicación:

Paso 1: Información provista

Presión inicial (P₁): 1,5 atmVolumen inicial (V₁): 20 LPresión final (P₂): 6 atm

Paso 2: Calcular el volumen final del gas

Si asumimos temperatura constante y comportamiento ideal, podemos calcular el volumen final del gas (V₂) usando la Ley de Boyle.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁ / P₂

V₂ = 1,5 atm × 20 L / 6 atm = 5 L

The expression below was formed by combining different gas laws. V is proportional to StartFraction n T over P EndFraction. Which law was used to determine the relationship between the volume and the number of moles in this equation?

Answers

Answer:

The Ideal gas law

Explanation:

From the given question, we have:

V [tex]\alpha[/tex] [tex]\frac{nT}{P}[/tex]

where each variable has its usual meaning.

Thus,

V = [tex]\frac{nRT}{P}[/tex]

where R is the ideal gas constant

cross multiply to have;

PV = nRT

This implies that the volume of the gas is directly proportional to the number of moles of the gas.

Therefore, the law can be used to determine the relationship between the volume and number of moles is the ideal gas law.

What happens in nuclear fission?
A. Electrons fall to lower energy levels, emitting photons.
B. Two separate nuclei join together to form one nucleus.
C. A nucleus gains neutrons by emitting an alpha particle.
D. A nucleus is divided into more than one nucleus.

Answers

D not confirm
Splitting an atoms nucleus apart

Answer: D

Explanation:

I just did it

In which orbital would the valance electrons for carbon(C) be placed?

Answers

Carbon has an atomic number of 6 so its electron configuration will be 1s² 2s² 2p². It has two orbitals as indicated with the 2 as its period number with the outer orbital have 4 valence electrons. So carbon is in the p-orbital, period 2 and in group 4.

Need organic chemistry 11th grade

for practice and 1 question is enough :)

Answers

Answer:

ok all you need is a little study

Explanation:

organic chemistry isn't something to worry about is something that is a very simple concept if you understand what you're doing so a little bit of studying will help you go through it and you really don't this is not the topics that you will really understand if you just go through it as once so there is no need to worry about organic chemistry it is very simple concept just learning you are a you are close just learn all those simple aspects alkane etc it's very easy

Other Questions
Given the following equation x2 + 4x = 21 find the solutions. (Show All Work)15a) Set the equation equal to 0 by inverse operations.15b) Place the equation in factored form.15c) Set each factor equal to 0 and solve for x.I need help asap will give brainlist if answered and work is showed! Implement anyone principle from Industry 4.0 Six Design Principles on any organization? What is one way the executive branch checks the power of the judicialbranch? Explain the meaning of work done and give examples Which method is best suited for separating a 500 mL sample of two miscible liquids whose boiling points differ by approximately 60C? A) use of a separators funnel B) paper chromatographyC) evaporation D) distillation E) fractional distillation Analysez les phrases et choisissez celle qui est vraie.a.French art has been influenced only by African cultures, especially Algerian culture.b.French art has been influenced by numerous cultures such as African and Asian.c.The French have managed to preserve their art and not allow any other cultures to influence it. Jasmine used the number line to find the distance between 0 and 5. What was Jasmines error? Jasmine should have counted from 5 to 0. Jasmine started with the wrong integer. Jasmine gave a negative answer for distance. Jasmine ended with the wrong integer. The partnership of Butler, Osman, and Ward was formed several years ago as a local tax preparation firm. Two partners have reached retirement age, and the partners have decided to terminate operations and liquidate the business. Liquidation expenses of $43,000 are expected. The partnership balance sheet at the start of liquidation is as follows:Cash $39,000 Liabilities $179,000Accounts receivable 69,000 Butler, loan 39,000Office equipment (net) 59,000 Butler, capital (25%) 95,000Building (net) 155,000 Osman, capital (25%) 39,000Land 145,000 Ward, capital (50%) 115,000Total assets $467,000 Total liabilities and capital $467,000Required:Prepare a predistribution plan for this partnership What are most likely the values of the quantum numbers I and mI for anelectron in a 3p orbital?A. I = 1, 2, 3; mI = -1/2, + 1/2B. I = 3; mI = -1/2, + 1/2C. I = 0, 1, 2, 3; mI = -1, 0, 1D. I = 1; mI = -1, 0, 1 write a story about a holidayin a caravan somewhere unusual Universal ethics can help us Consider the function shown in the table.What are the inputs of the function?-1, 0, 1, 2-1,0,3-1, 0, 1, 2, 3 What does this action (sacrifice of Tamoras son) show about Titus character and beliefs? i dont understand how to find the number that goes into the blank box. Please help, I might give brainliest. Please help!! i need to know this question in 20 minutes express 96 as the product of prime factorsneed it asapplzz write the method too The mean price for a 2,000sq foot home in FL is $240,000 with a Standard Deviation of $16,000. The mean price of the same sized home in OH is $170,000 with a standard deviation of $12,000. Which state would a home priced at $200,000 be closer to the mean price, compared to the distribution of prices in the state? Find the z score for each state. The figure above is a regular hexas What is the value of x? Explain the process in which hormones secreted by the pancreas function with respect to increased glucose levels in the blood