Engineering High School

what is the ampere unit of force and how is that unit derived?

Answers

Answer 1

The ampere (/aempr/, US: /mpr/; symbol: A), also known as the amp, is the unit of electric current in the International System of Units (SI). One ampere is equal to one coulomb, or 6.2415090741018 electrons passing through a point in one second.

What is ampere?

The ampere, commonly abbreviated as "amp," is the base unit of electric flow in the International System of Units (SI). It was named after French mathematician and physicist André-Marie Ampère (1775-1836), widely regarded as the father of electrodynamics. The ampere is defined by the International System of Units in terms of other base units by estimating the electromagnetic power between electrical conductors that carry the electric flow. The previous CGS estimation framework employed two distinct definitions of current, one based on SI units and the other on electric charge as the base unit. The charge unit is calculated by measuring the power between two charged metal plates. The ampere was then defined as one coulomb of charge per second. SI defines the coulomb as the unit of charge.

To know more about Ampere, click on the link :

https://brainly.com/question/1476646

#SPJ1

Related Questions

All of the following are common manual transmission problems EXCEPT: (A) bent shift mechanism. B) worn thrust washers. (C) clogged modulator valve. (D) damaged extension housing.​

Answers

Option (C) clogged modulator valve is not a common manual transmission problem. This component is typically associated with automatic transmissions, not manual transmissions.

Explanation

Manual transmission problems can include a range of issues that can affect the performance of the transmission. Here short explanation about other option except C as common manual transmission problems:

Bent shift mechanism.
The shift mechanism in a manual transmission is responsible for moving the gears into the correct position for each gear change. If the shift mechanism is bent or damaged, it can cause difficulty in shifting gears or even prevent the transmission from shifting at all. This can happen due to wear and tear, damage from impact or other causes.Worn thrust washers.
Thrust washers are small components in the transmission that help to control the movement of the gears. If the thrust washers become worn, they can cause excessive play in the gears, leading to difficulty in shifting and even gear slippage. This can happen due to normal wear and tear or improper lubrication.Damaged extension housing.
The extension housing is the outermost component of the transmission on the backside that houses the output shaft. If it becomes damaged due to wear and tear, impact or other causes, it can cause leaks in the transmission or even prevent it from operating altogether. A damaged extension housing can cause the transmission to fail or operate poorly.

Learn more about other manual transmission problems on:

https://brainly.com/question/20216172https://brainly.com/question/13142496https://brainly.com/question/28525751

how many grams of water can be heated from 10 degrees to 45 degrees using 20,500 joules of energy

Answers

Therefore, 20,500 Joules of energy can heat 1,104.3 grams of water from 10 degrees Celsius to 45 degrees Celsius.

Specific heat capacity

Calculate the energy (in Joules) required to heat 1 gram of water from 10 degrees Celsius to 45 degrees Celsius:

Q = m * c * ΔT

Q = 1 gram * 4.184 Joules/gram-degree Celsius * (45 - 10) degrees Celsius

Q = 18.47 Joules

Calculate the amount of water (in grams) that can be heated with 20,500 Joules of energy:

20,500 Joules / 18.47 Joules = 1,104.3 grams

Learn more about Specific heat capacity here:

https://brainly.com/question/27991746

#SPJ1

formal letter to step down in position​

Answers

[Your Name]

[Your Address]

[City, State ZIP Code]

[Your Email]

[Date]

[Recipient Name]

[Recipient Position]

[Company Name]

[Address]

[City, State ZIP Code]

Dear [Recipient Name],

I am writing this letter to inform you that I have decided to step down from my position as [Your Position] at [Company Name]. My resignation is effective from [Date].

I have made this decision after much consideration and reflection on my personal and professional goals. While I have greatly enjoyed working at [Company Name] and appreciate the opportunities and support provided by the organization, I have decided that it is time for me to pursue other career opportunities.

I will ensure a smooth transition by completing my pending work and helping my replacement to settle into the role. I am willing to assist in any way possible to ensure that my duties and responsibilities are transferred smoothly to my successor.

I would like to take this opportunity to express my gratitude to [Recipient Name] and the entire management team for their support, guidance, and mentorship during my time at [Company Name]. I have learned a lot from my colleagues, and I am grateful for the professional growth opportunities provided to me.

Please let me know if there is any additional information you need from me or if I can assist in any way during this transition period.

Thank you for understanding my decision.

Sincerely,

[Your Name]

Suppose we have four jobs in a computer system, in the order JOB1, JOB2, JOB3 and JOB4. JOB1 requires 8 s of CPU time and 8 s of I/O time; JOB2 requires 4 s of CPU time and 14 s of disk time; JOB3 requires 6 s of CPU time; and, JOB4 requires 4 s of CPU time and 16 s of printer time. Define the following quantities for system utilization: • Turnaround time = actual time to complete a job • Throughput = average number of jobs completed per time period T • Processor utilization = percentage of time that the processor is active (not waiting) Compute these quantities (with illustrations if needed) in each of the following systems: a. A uniprogramming system, whereby each job executes to completion before the next job can start its execution. b. A multiprogramming system that follows a simple round-robin scheduling. Each process gets 2 s of CPU time turn-wise in a circular manner.

Answers

Answer:

Explanation:

a. Uniprogramming System:

Turnaround Time: For JOB1, the turnaround time is 16 s (8 s CPU time + 8 s I/O time). For JOB2, the turnaround time is 18 s (4 s CPU time + 14 s disk time). For JOB3, the turnaround time is 6 s (6 s CPU time). For JOB4, the turnaround time is 20 s (4 s CPU time + 16 s printer time).

Throughput: In a uniprogramming system, the throughput is equal to 1 job per time period, as only one job can be processed at a time.

Processor Utilization: For JOB1, the processor utilization is 8/16 = 50%. For JOB2, the processor utilization is 4/18 = 22.2%. For JOB3, the processor utilization is 6/6 = 100%. For JOB4, the processor utilization is 4/20 = 20%.

b. Multiprogramming System:

Turnaround Time: For JOB1, the turnaround time is 24 s (8 s CPU time + 8 s I/O time + 8 s waiting). For JOB2, the turnaround time is 24 s (4 s CPU time + 14 s disk time + 6 s waiting). For JOB3, the turnaround time is 16 s (6 s CPU time + 10 s waiting). For JOB4, the turnaround time is 32 s (4 s CPU time + 16 s printer time + 12 s waiting).

Throughput: In a multiprogramming system, the throughput is equal to 4 jobs per time period, as all four jobs can be processed concurrently.

Processor Utilization: For JOB1, the processor utilization is 8/24 = 33.3%. For JOB2, the processor utilization is 4/24 = 16.7%. For JOB3, the processor utilization is 6/16 = 37.5%. For JOB4, the processor utilization is 4/32 = 12.5%.

Here are the turnaround time, throughput, and processor utilization for the four jobs in a uniprogramming and round-robin system:

Uniprogramming

Turnaround time:

JOB1: 16 s

JOB2: 22 s

JOB3: 12 s

JOB4: 20 s

Throughput: 1 job/16 s

Processor utilization: 50%

Round-Robin

Turnaround time:

JOB1: 18 s

JOB2: 14 s

JOB3: 10 s

JOB4: 18 s

Throughput: 2 jobs/16 s

Processor utilization: 62.5%

The difference in turnaround time between the two systems is due to the fact that in a uniprogramming system, the CPU is idle while a job is waiting for I/O. In a round-robin system, the CPU is always running, even if it is only running a short burst of code for another job.

The difference in throughput between the two systems is also due to the fact that in a round-robin system, the CPU is always running, so more jobs can be completed in a given amount of time.

The processor utilization is higher in a round-robin system because the CPU is not idle as often. However, the turnaround time is also higher because the jobs have to share the CPU.

Read more about throughput here:

https://brainly.com/question/28390124

#SPJ2

Other Questions
Suppose you have a money income of $10, all of which you spend on Coke and popcorn. n the above diagram, the prices of Coke and popcorn respectively are: A. $0.50 and $1.00. B. $1.00 and $0.50 C. $1.00 and $2.00. D. $0.40 and $0.50 HELP ME AGAIN PLEZ!!!!!!! What is the purpose of each plant structure?1.xylem2.phloema.transports water and nutrientsb.transports foo determine, without actually computing the z transform, the rocs for the z transform of the following signals: which of the following factors might decrease the rate of change of the population as the logistic curve approaches the carrying capacity? select one: a. intraspecific competition b. climate c. predation d. a and c What was the result of Germany's unrestricted submarine warfare? Which groups do socialists believe are most in need of government protection?answer choicespriests and missionariesrural and industrial workerssoldiers and sailorsmerchants and industrialists Determine whether the statement is true or false. If it is false, rewrite it as a true statement. A sampling distribution is normal only if the population is normal. Choose the correct answer below. A. The statement is true. B. The statement is false. A sampling distribution is normal only if n30. C. The statement is false. A sampling distribution is normal if either n30 or the population. D. The statement is false. A sampling distribution is never normal. a capacitor is made of three parallel conducting plates of area and non-zero but negligible thickness, with the two outer plates on the left and the right connected together by a conducting wire. the outer plates are separated by a distance . the distance from the middle plate to the left plate is . the distance from the inner plate to the right plate is . you may assume all three plates are very thin compared to the distances and . neglect edge effects. What is an equation for the quadratic function represented by the table shown?(0,-1),(2,3),(4,-1),(6,-13) Use the power of a power property to simplify the numeric expression.(91/4)^7/2 When a person authorizes another to make medical decisions on his or her behalf, the person has written which of the following?Proxy directive Treatment directive Living will Standard addendum to a will _____ is a technique that works based on the norm for social commitment, whereas _____ is a technique that works based on people's self-related attitudes shifting in a situation. Business level strategy addresses two related issues: what businesses should a corporation compete in and how can these businesses be managed so that they create synergy. True or False BZ 2008 jun3(a) The dig show a section dugh a heally hag anda sectidrough a discased longcapillariesAred Moodcells(1)Healdry longName the structures labelled A and Bdeva to theDiseased long[2)ABState the name of the disease shown in the diagram and explain your reasons for thischoice[3]Name of diseaseExplanation(i) Explain the effects that the disease will have on the process of gaseous exchange inthe diseased lung.[2] main Street tea company blends black tea that sells for $3.45 a pound with Earl Gray tea that sells for $2.15 a pound to produce 80 lb of mixture that they sell for $2.75 a pound how much of each kind of tea does the mixture contain rounding to the nearest pound The product life cycle presents challenges. Which of the following is LEAST likely torequire a company to adapt its marketing strategies?A) developments in technologyB) decreased manufacturing costsC) competitionD) changing tastes of consumersE) aging of products For the best system, calculate the ratio of the masses of the buffer components required to make the buffer. Express your answer using two significant figures. NH3/NH4Cl ph=8.95 The Art Forger Who Tricked the NazisWhere did the trial take place? What was the defendant accused of?What was strange about his defense?How did Han van Meegeren manage to forge the works of art so well? What did he do to make them look authentic?How could forensic testing have changed this case?What ultimately happened to van Meegeren?Money to Run, But No Skills to HideHow did Schrenker try to fake his own death? How did he get caught?Why is creating a new state ID harder to do these days?Why is it so difficult to fake a passport? What is the easiest way for criminals to obtain a passport?Why does Mr. Abagnale claim it is easy to get a fraudulent passport? What steps does someone have to take to make this happen?Why was Mr. Abagnale arrested? What happened to him after his arrest? For the function f(x)=x^2+4x-12 solve the following. F(x) 0 determine whether each label describes water-soluble or fat-soluble vitamins.