The electrolysis of water has the equation 2H2O (l) → 2H2 (g) + O2 (g). What type of reaction is this?
A)
Single displacement
B)
Double displacement
C)
Decomposition
D)
Synthesis
Answer:b
Explanation:
An element X has the proton number 18.
The next element in the periodic table is an element Y.
Which statement is correct?
Answer:
This question is incomplete
Explanation:
This question is incomplete. However, the element X with the atomic number of 18 is Argon (Ar) while the next element (element Y) in the periodic table, with atomic number 19, is potassium (K).
Element X is found in the group zero (also called group 18 and elements found therewith are referred to as noble gases) of the periodic table while element Y is found in group 1 (elements found here are referred to as alkali metals).
Element X has a completely filled outermost shell while element Y has one electron in its outermost shell.
Element X is a metal while element Y is a nonmetal.
How did reducing the number of
decomposers affect the amount of carbon
dioxide in the ecosystem?
Answer:
As organisms release energy during cellular respiration, carbon dioxide is produced from the carbon in energy storage molecules. ... Carbon dioxide in the biodome decreased because decomposers decreased which means there was a decrease in cellular respiration overall.
btw :
stay safe! :3
Pleaseee helpppp.....
Answer:
C. All of the above
Explanation:
They all happen beyond critical point.
bf3 can be octet or not
Answer:
(BH3 follows the octet rule by dimerizing, as Hadi Kurniawan AR pointed out.) For H and He, an "octet" = 2 electrons. Boron does prefer to follow the octet rule, in that it likes to form borate compounds such as NaBH4. It also is happy to form compounds with elements with lone pairs.
what is indepent and dependent variables
Answer:
The independent variable is the cause. Its value is independent of other variables in your study.
The dependent variable is the effect. Its value depends on changes in the independent variable.
Ex: The ice cube melts on the stove.
Dependent variable: Ice Cube
Independent variable: heat of stove
Answer:
In an experiment, the IV(independent variable) is a variable that is changed to see how it affects something else, and the DV (dependent variable)is a variable that is being measured/observed.
hope this help!
please mark as brainiest <3
Determine the number of subatomic particles in bromine-35.
Number of subatomic particles=35+36+35=106
Explanation:
Atomic number=35
Mass number=71
No. of proton p=35
No. of neutron n=71−35=36
No. of electron e=35
ASAP!!!!!!!!!!!!A marble bag contains 10 red marbles, 19 yellow marbles, and 29 green marbles. What is the % composition of each color marble in the bag?
Answer:
Red: 17.24%
Yellow: 32.76%
Green: 50%
Explanation:
Which of the following is an example of nuclear fission?
A. A gamma emitter is used to trace movement of chemicals in the
environment.
B. A radioactive drug that emits electrons is used to treat cancer in a
patient.
O c. Two different isotopes of hydrogen form an isotope of helium on
the sun.
O D. A large radioactive atom breaks into smaller atoms, producing
nuclear energy.
The statement which is an example of nuclear fission is that a large radioactive atom breaks into smaller atoms, producing nuclear energy.
What is nuclear fission?Nuclear fission is a kind of radioactive decay reaction in which an unstable nuclei of an atom will split into smaller stable nuclei by the emission of lots of energy.
Gamma emitter is used inside the human body to trace the information that assists in making a diagnosis by the help of medication.To treat cancer patient high energetic rays like x-rays, gamma-rays are used.Formation of isotope of helium from two different isotopes of hydrogen is an example of nuclear fussion reaction.Hence in nuclear fission a large radioactive atom breaks into smaller atoms, producing nuclear energy.
To know more about nuclear fission, visit the below link:
https://brainly.com/question/3992688
can someone check if i did this right. thank you !!
Answer:
noo
Explanation:
its basic
....................
Answer: acidic
Explanation:
Which of the following elements is a metalloid (semimetal)?
C
P
Sb
N
In
Answer:
Sb
Explanation:
Sb (antimony) is an metalloid
Consider the following chemical reaction:
HF + NaOH - NaF + H20
Energy must be invested in order for the reaction to proceed.
What bonds must be broken in order for the reaction to proceed.
Select ALL that apply.
A. An ionic bond between sodium and hydroxide.
B. An ionic bond between sodium and fluorine.
C. A covalent bond between sodiume and fluorine.
D. An ionic bond between hydrogen and fluorine.
DE. A covalent bond between hydrogen and fluorine.
DE A covalent bond between hydrogen and oxygen
Answer: The correct options are A and E
Explanation:
A chemical reaction is defined as the reaction in which two or more chemical substances react to form two or more different chemical substances.
A new substance (product) is formed in a chemical reaction when the bonds between the reactants are broken so that the new bonds between the products can be formed.
For a given chemical reaction:
[tex]HF+NaOH\rightarrow NaF+H_2O[/tex]
Here,
HF is a covalent compound as sharing of electrons take place between hydrogen and fluorine atom
NaOH is an ionic compound as a complete transfer of electrons occurs from sodium to hydroxide.
Thus, to form the products, an ionic bond between sodium and hydroxide must be broken coupled with a covalent bond between hydrogen and fluorine.
Hence, the correct options are A and E
Nitrogen is a group 15 element. What does being In this group imply about the structure of the nitrogen atom?
Answer:
Nitrogen has 5 valence electrons
Explanation:
nitrogen has it's attoms form triple bonds which are very hard to break
so non-reactive
What force is important in the creation of both coal and petroleum?
Explanation:
heat and pressure are two main forces that transform organic matter into fossil fuels
4. Completa el texto con las siguientes palabras del listado. La contaminación por ? Es una alteración ? Que destruye la vegetación, ? Y el suelo y afecta el ? , es el resultado de la quema de ? Y gases industriales nocivos.
Answer:
Actividades humanas y vida marina.
Explicación:
La contaminación ocurre por actividades humanas que se considera una alteración en el medio ambiente. Esta contaminación provocada por el ser humano puede destruir la vegetación, el suelo y afectar negativamente a la vida marina. Esta destrucción que se produce en el medio ambiente es el resultado de la quema de combustibles fósiles que liberan gases industriales nocivos en la atmósfera por lo que si queremos proteger nuestro medio ambiente de mayores daños tenemos que reducir las actividades que provocan la liberación de gases nocivos en la atmósfera. .
This cell is dividing into two cells.
Answer:
answer: B or D
Explanation:
hope it helps thanks❤
Please help I’ll give brainliest
REACTION TYPE:
Single displacement/Oxidation-reduction
(Hope this helped UwU)
Answer:
Synthesis reaction is the answer
why does shampoo remove hair grese for chemistry acids and alkali
Concentrations-
How many moles of HCI are present in 562.0 ml of a 6.17 M HCI solution?
If possible, show work.
Which of the following issues surrounding nuclear power creates the biggest
concern?
A. Where nuclear power should be used
B. How to deal with the radioactive waste
c. How many power plants should be built
O D. What nuclear power should be used for
Question : Which issue surrounding nuclear power creates the biggest concern?
Answer : How to deal with the radioactive waste (B)
The following issues surrounding nuclear power that create the biggest concern is What nuclear power should be used for?
What is nuclear power?Nuclear powers are those powers that are produced by nuclear reactions. These reactions include nuclear fission, nuclear fusion, and nuclear decay. Nuclear power is currently in use to produce electricity. The reaction uses uranium and plutonium reaction to produce electricity.
Nuclear power is used for generating electricity, and it is necessary to use the correct radioisotopes to produce electricity.
Thus, the correct option is D. What nuclear power should be used for?
Learn more about nuclear power, here:
https://brainly.com/question/9859575
#SPJ2
what is periodic law
what is the chemical formula : hydrogen and chlorine ?
Answer:
HCl
Explanation:
Explain a polar molecules and give examples
Which value could be the y-coordinate for point Q?
215
42
2/13
8/2
Who is my favourite wrestler?
Answer:
ma herdina thesto wrestling
. Calculate the pH and the pOH of each of the following solutions at 25 °C for which the substances ionize completely:
(a) 0.200 M HCl
(b) 0.0143 M NaOH
(c) 3.0 M HNO3
(d) 0.0031 M Ca(OH)2
Based on the molarity of the solutions;
For 0.200 M HCl; pH = 0.699, pOH = 13.301For 0.0143 M NaOH; pOH = 1.845, pH = 12.16For 3.0 M HNO3; pH = -0.4771, poH = 14.4771For 0.0031 M Ca(OH)2; pOH = 2.21, pH = 11.79What pHand pOH?pH is the negative logarithm to base ten of the hydrogen ions concentration of a solution.
pH = -log[H+]pOH is the negative logarithm to base ten of the hydroxide ions concentration.
pOH = -log[OH-]Also;
pH + pOH = 14For HCl:
pH = -log [H3O+]
pH =-log (0.200)
pH = 0.699
Then;
poH= 14-0.699
pOH = 13.301
For NaOH:
pOH= -log [OH-]
= -log (0.0143)
pOH = 1.845
Then;
pH= 14-poH
= 14- 1.845
pH = 12.16
For HNO3:
pH= -log[H3O+]
=-log(3.0)
= -0.4771
Then;
pOH = 14-9-0.4771
pOH = 14.4771
For [Ca(OH)2]
molarity = 0.0031M
2 moles of OH- are produced
[OH-]= 2 × 0.0031
[OH-] = 0.0062M
pOH = - log[OH-]
=-log(0.0062)
=-log(6.2x10-3)
=-(-2.21)
pOH = 2.21
Then;
pH =14-2.21
pH =11.79
Learn more about pH and pOH at: https://brainly.com/question/13557815
12. Which nonmetal is the most reactive?
A bromine
B
iodine
C) fluorine
D) chlorine
Answer:
C Fluorine
Explanation:
When 11.2 liters of hydrogen gas is made by adding zinc to sulfuric acid, what mass
of zinc is needed?
Zn + H2SO4 -> H2 + ZnSO4
32.7 g Zn
Explanation:
First convert the amount of gas into moles:
11.2 L H2 × (1 mol H2/22.4 L H2) = 0.500 mol H2
Then use the molar ratio to find the amount of zinc necessary to produce the amount of gas above:
0.500 mol H2 × (1 mol Zn/1 mol H2)
= 0.500 mol Zn
Now use the molar mass of zinc to find the number of grams of zinc for the reaction to occur:
0.500 mol Zn × (65.38 g Zn/1 mol Zn)
= 32.7 g Zn
The reaction below is performed with 10.0 g of Al and 19.0 g of O2. How many grams of aluminum oxide will be made? 4 Al (s) + 3 O2 (g) → 2 Al2O3 (s)
Answer:
18.89 g of Al₂O₃.
Explanation:
The balanced equation for the reaction is given below:
4Al + 3O₂ —> 2Al₂O₃
Next, we shall determine the masses of Al and O₂ that reacted and the mass of Al₂O₃ produced from the balanced equation. This can be obtained as follow:
Molar mass of Al = 27 g/mol
Mass of Al from the balanced equation = 4 × 27 = 108 g
Molar mass of O₂ = 16 × 2 = 32 g/mol
Mass of O₂ from the balanced = 3 × 32
= 96 g
Molar mass of Al₂O₃ = (27×2) + (16×3)
= 54 + 48
= 102 g/mol
Mass of Al₂O₃ from the balanced equation = 2 × 102 = 204 g
SUMMARY:
From the balanced equation above,
108 g of Al reacted with 96 g of O₂ to produce 204 g of Al₂O₃.
Next, we shall determine the limiting reactant. This can be obtained as follow:
From the balanced equation above,
108 g of Al reacted with 96 g of O₂.
Therefore, 10 g of Al will react with
= (10 × 96)/108 = 8.89 g of O₂.
From the calculation made above, we can see clearly that only 8.89 g out of 19 g of O₂ given, reacted completely with 10 g of Al.
Therefore, Al is the limiting reactant and O₂ is the excess reactant.
Finally, we shall determine the mass of aluminium oxide, Al₂O₃, produced from the reaction.
NOTE: in this case, the limiting reactant will be used because it will give the maximum mass of the aluminium oxide, Al₂O₃ as all of it is consumed in the reaction.
Al is the limiting reactant and the mass of aluminium oxide, Al₂O₃ produced can be obtained as follow:
From the balanced equation above,
108 g of Al reacted to produce 204 g of Al₂O₃.
Therefore, 10 g of Al will react to produce = (10 × 204)/108 = 18.89 g of Al₂O₃.
Thus, 18.89 g of Al₂O₃ were obtained from the reaction.
Q1.what is irragation
Answer:
Irrigation is the artificial process of applying controlled amounts of water to land to assist in production of crops. Irrigation helps to grow agricultural crops, maintain landscapes, and revegetate disturbed soils in dry areas and during periods of less than average rainfall.
Answer: The watering of crop plants in regular intervals is known as irrigation. ... Weeds are unwanted plants thet grows with the crop plants. Weeding means to remove those plants. It is done manually or by machine. Using khurpi it is done manually and using seed drill it is done by machine.
Explanation:
Irrigation is the artificial application of water to the soil through various systems of tubes, pumps, and sprays. Irrigation is usually used in areas where rainfall is irregular or dry times or drought is expected.
Hope it helps
