What is the code to this I need help asap.

The shear force and bending moment diagrams for the given beam will have multiple segments of different shapes and slopes, reflecting the variation of loads along the length of the beam.

To construct the shear and bending diagrams for the given beam, we need to analyze the beam for the different sections where the load is applied. We can break down the beam into five sections:

Leftmost section (0 ≤ x ≤ L/4)

Second section (L/4 < x ≤ L/2)

Third section (L/2 < x ≤ 5L/12)

Fourth section (5L/12 < x ≤ 7L/12)

Rightmost section (7L/12 < x ≤ L)

We can use the equations for shear and bending moments to create the plots:

For section 1: 0 ≤ x ≤ L/4

The shear force diagram will be constant since there is no load applied in this section. The bending moment diagram will be a sloping line, which will be zero at x = 0 and will increase linearly with x as we move toward the right end of the section.

For section 2: L/4 < x ≤ L/2

The shear force diagram will start from the value of P at x = L/4 and remain constant up to x = L/2. The bending moment diagram will be a parabolic curve, which will be zero at x = L/4 and L/2 and will reach a maximum value at the midpoint of the section.

For section 3: L/2 < x ≤ 5L/12

The shear force diagram will start from the value of P at x = L/4 and remain constant up to x = L/2. At x = 5L/12, a load of P/3 is added, causing the shear force to increase suddenly. The bending moment diagram will be a cubic curve, which will be zero at x = L/4 and L/2, and will have a local minimum at x = 5L/12.

For section 4: 5L/12 < x ≤ 7L/12

The shear force diagram will start from the value of P + P/3 at x = 5L/12 and remain constant up to x = 7L/12. The bending moment diagram will be a cubic curve, which will be zero at x = L/4 and L/2, and will have a local maximum at x = 7L/12.

For section 5: 7L/12 < x ≤ L

The shear force diagram will start from the value of P + P/3 at x = 5L/12 and remain constant up to x = 7L/12. At x = L/3, a load of P/3 is added, causing the shear force to decrease suddenly. The bending moment diagram will be a parabolic curve, which will be zero at x = L/4 and L/2 and will reach a minimum value at the midpoint of the section.

Find out more about the shear force

brainly.com/question/29664085

#SPJ4

The probability of a randomly selected, normally distributed value lying between 20 below the mean and 20 above the mean is 0.9545 (rounded to the nearest hundredth).

A number between zero and one represents the probability that an occurrence will take place. An event is a predefined set of random variable outcomes. Only one mutually exclusive event can occur at a time. Exhaustive events encompass or include all possible outcomes.

We can calculate the probabilities of a randomly chosen value falling between different z-scores using the provided standard normal distribution table.

a) The probability of a value being 0 below or above the mean is the same as the probability of a value being -1 to 1 standard deviations from the mean. According to the standard normal distribution table, the probability of a z-score between -1 and 1 is 0.6827. As a result, the probability of a randomly chosen, normally distributed value falling between 0 below and 0 above the mean is 0.6827. (rounded to the nearest hundredth).

b) The probability of a value falling between 20 and 20 standard deviations from the mean is the same as the probability of a value falling between -20/10 and 20/10 standard deviations from the mean (since the standard deviation is 10). According to the standard normal distribution table, the probability of a z-score between -2 and 2 is 0.9545. As a result, the probability of a randomly chosen, normally distributed value falling between 20 below and 20 above the mean is 0.9545. (rounded to the nearest hundredth).

To know more about probability visit:

https://brainly.com/question/30719832

#SPJ1

Answer:

If the time is 3:45 how many minutes is it slow or fast

The simplification of the given expression

[tex]y = ( \sqrt{47 + \sqrt{9 - \sqrt{25)} } } [/tex]

is y = 7

[tex]y = ( \sqrt{47 + \sqrt{9 - \sqrt{25)} } } [/tex]

find the square root of 25

[tex]y =( \sqrt{47 + \sqrt{9 - 5} } [/tex]

simplify root 9 - 5

[tex]y = ( \sqrt{47 + \sqrt{4} } [/tex]

find the square root of 4

[tex]y = ( \sqrt{47 + 2)} [/tex]

Add root 47 and 2

[tex]y = ( \sqrt{49} )[/tex]

Find the square root of 49

y = 7

Therefore, the solution to the given expression is y = 7

Read more on simplification:

https://brainly.com/question/723406

#SPJ1

Answer:

150 cm2

Step-by-step explanation:

Given side of cube's area = 25. Since Side's a square,

Edge^2 = 5^2 = 5 cm

Total surface area: 6*a² = 6*5*5 = 150 cm2

Answer:

x = ±10

Step-by-step explanation:

1) Subtract 10 from both sides.

[tex]-0.1 \times x^2=-10[/tex]

2) Divide both sides by -0.1.

[tex]x^2=\frac{-10}{-0.1}[/tex]

3) Simplify [tex]\frac{-10}{-0.1}[/tex] to 100.

[tex]x^2=100[/tex]

4) Take the square root of both sides.

[tex]x=\pm \sqrt{100}[/tex]

5) Since 10 * 10 is 100, the square root of 100 is 10.

[tex]x=\pm10[/tex]

Answer:

Step-by-step explanation:

To find the number of students who studied in the library or cafeteria (including both), we need to add the number of students who studied in the library and the number of students who studied in the cafeteria, but we need to subtract the number of students who studied in both the library and cafeteria to avoid counting them twice.

So, the number of students who studied in library or cafeteria is:

170 + 135 - 76 = 229

Therefore, 229 students studied in the library or cafeteria (including both).

Answer:

I don't knowI am sorry I will let someone else answer

Step-by-step explanation:

The volume of the new rectangular prism is 160 in³ after it has been dilated with a scale factor of 2.

In this case, the scale factor is 2, which means that the dimensions of the original figure will be multiplied by 2 to get the dimensions of the new figure.

Volume of rectangular prism = length x width x height

20 = l x w x h

Next, we need to find the new dimensions of the rectangular prism after it has been dilated by a scale factor of 2. We can do this by multiplying each dimension of the original rectangular prism by 2.

New length = 2 x l

New width = 2 x w

New height = 2 x h

Now we can find the volume of the new rectangular prism by using the same formula as before, but with the new dimensions:

Volume of new rectangular prism = (2 x l) x (2 x w) x (2 x h)

Simplifying this expression, we get:

Volume of new rectangular prism = 8 x (l x w x h)

We know that l x w x h is equal to the volume of the original rectangular prism, which is 20 in³. So we can substitute this value into the expression to get:

Volume of new rectangular prism = 8 x 20 in³

Volume of new rectangular prism = 160 in³

To know more about volume here

https://brainly.com/question/11168779

#SPJ4

Answer:

[tex]b) \quad(-1,0,2)[/tex]

Step-by-step explanation:

The domain is the set of all input values for a function. It can be represented as a list of values where it is countable or as a set notation

Here there are only 3 ordered pairs. The first entry in each ordered pair represents the input of the function, the second entry the corresponding output value

Looking at the first entry in all three ordered pairs we get the domain as
[tex](-1, 0 , 2)[/tex]

The likelihood that one or more of the dice will land on an even number is 1296.

The likelihood of an event is quantified by its probability, which is a number. It is stated as a number between 0 and 1, or in percentage form, as a range between 0% and 100%. The likelihood of an event increasing with probability of occurrence.

Four 6-sided dice are rolled what is the probability that at least two dice show least 2 die the same.

For 2 of the same: 5×5×642) =900

For 3 of the same: 5×643) =120

For 4 of the same: 644) =6

Combined: 900+120+6=1026

Total possibilities: 64=1296

To know more about probability visit:

https://brainly.com/question/30034780

#SPJ1

The probability that at least one of the dice lands on an even number is 15/16 or approximately 0.938.

What is probability?

Probability is a measure of the likelihood of an event occurring. It is a number between 0 and 1, where 0 means the event is impossible and 1 means the event is certain to happen. The probability of an event can be calculated by dividing the number of favorable outcomes by the total number of possible outcomes.

We can solve this problem by finding the probability that all four dice land on odd numbers and then subtracting this probability from 1 to get the probability that at least one of the dice lands on an even number.

The probability that one dice lands on an odd number is 3/6 = 1/2, and the probability that all four dice land on odd numbers is:

(1/2) × (1/2) × (1/2) × (1/2) = 1/16

Therefore, the probability that at least one of the dice lands on an even number is:

1 - 1/16 = 15/16

So the probability that at least one of the dice lands on an even number is 15/16 or approximately 0.938.

To learn more about probability from the given link:

https://brainly.com/question/30034780

#SPJ1

Answer:

55 degrees angles on a rights angle triangle. 1 and 3 they are equal cause they are vertical opp angles 55 degrees

In linear equation, 11.85 pounds is the weight of the wire.

What is  linear equation?

A linear equation is a first-order (linear) term plus a constant in the algebraic form y=mx+b, where m is the slope and b is the y-intercept. The variables in the previous sentence, y and x, are referred to as a "linear equation with two variables" at times.

Total weight of pool having 16 wires     =13.6 pounds

Weight of the pool                                 =1.75

Therefore the weight of the wire alone = 13.6 - 1.75

                                                             =  11.85 pounds

Learn more about linear equation

brainly.com/question/11897796

#SPJ1

Using the concept of parabola, the quadratic inequality represented by the graph can be written as:

y = x² -2x +2.

An equation of a curve that has a point on it that is equally spaced from a fixed point and a fixed line is referred to as a parabola.

The parabola's fixed point is referred to as the focus, and its fixed line is referred to as the directrix.

The general equation for a parabola is given as:

y = a(x-h) ² + k

Now here we have:

(x,y) = (2,5)

(h,k) = (1,1)

Putting these values in the equation,

5 = a (2-1) ² + 1

a = 5-1

=4

Substituting the values:

y = (x-1) + 1

y = x² -2x +2

Therefore, the quadratic inequality can be written as: y = x² -2x +2.

To know more about parabola, visit:

https://brainly.com/question/4074088

#SPJ1

Answer:

£22

Step-by-step explanation:

50% of 88=88/100 ×50=44

44÷2=25%=22

75% of £88 is deducted, so that 88-66=£22

a. Histogram shows tip amounts ranging between $6 and $25, skewed to the right with a longer tail of higher tips.

b. Increasing the $8 tip to $18 would increase the mean since total tip amount increases by $10 spread out over 60 customers. Median won't be affected since changing one value does not alter the middle value.

a. The histogram shows that Elizabeth received a range of tip amounts, with the majority of tips falling between $6 and $25. The distribution is skewed to the right, with a longer tail of higher tip amounts.

b. i. The mean would increase because the total tip amount would increase by $10, and this increase would be spread out over the 60 customers.

ii. The median would not be affected because it is the middle value when the data is ordered, and changing one value does not change the middle value.

Learn more about histogram here: brainly.com/question/30354484

#SPJ4

The values for a and b such that f(t) = a + logb(t) are,

a = log(1/log(49))

b = 49

Therefor

We can start by simplifying the expression for f(t)

f(t) = log49(t7)

f(t) = log(t7)/log(49) [Using the change of base formula]

Now we can rewrite f(t) as:

f(t) = log(t)/log(b) + a [Using the logarithmic properties log(ab) = log(a) + log(b)]

Comparing this expression with f(t) = a + logb(t), we can see that:

a = log(1/log(49)) [since log(b) = 1/log(49)]

b = t

Therefore, we have

f(t) = log(t7)/log(49) = log(t)/log(b) + log(1/log(49))

= log(t)/log(49) + log(1/log(49))

= log(1/log(49)) + log(t)/log(49)

So, a = log(1/log(49)) and b = 49.

Learn more about logarithmic property here

brainly.com/question/30226560

#SPJ4

If the top of Bria's bookcase has a length-to-width ratio of 3:1, the width of the top should be about 10 inches to provide an area of 300 square inches for her soap carving collection.

The top of the bookcase is a rectangle, the area of the top can be expressed as the product of its length and width:

Area of the top = length × width

Area of the top = 300 square inches

length × width = 300 square inches

width = 300 square inches / length

Assuming that the top of the bookcase is with a length-to-width ratio of

3 : 1

length = 3 × width

substituting the value gives

width = 300 / (3 × width)

Simplifying, we have:

width² = 100 square inches (the polynomial)

Taking the square root of both sides, we get:

width = √100 ≈ 10 inches

Then the length will be = 30 inches

Learn more about square inches at:

https://brainly.com/question/29198438

#SPJ!

The correct order of the steps to test the general hypothesis is given as B, A, E, C, D, F.

A hypothesis is basically a uncertain fact that is backed by some logical and solid information. While using the hypothesis, it s important that we use the correct method to verify the credibility of the hypothesis in the system.

So, as per the given option, the correct sequence should be, B, A, E, C, D, F.

We first set up the null hypothesis and the alternative hypothesis, and then we choose the degree of significance. The next phases in hypothesis testing are choosing the test statistics and creating the decision-making rule.

When we get to a conclusion based on the hypothesis after carefully calculating and computing the hypothesis' performance, the procedure is said to be finished.

To know more about Hypothesis, visit,

https://brainly.com/question/606806

#SPJ4

Complete question - place the following steps in order. what is the correct order for the general procedure for hypothesis testing?

A. Select the level of significance

B. setup null and alternative hypothesis

C. Establish the decision rule

D. performance computation

E. select the test statistics

F. Draw conclusions

Step-by-step explanation:

B) 20:23

C) 6,0375

hope this helps

Accοrding tο the data, the answers tο Questiοns 1 and 2 are: Harris shοuld anticipate spinning a sum οr less 10 apprοximately 367 times and a tοtal that is 10 οr larger apprοximately 133 times.

Yοur example is an equatiοn since an equatiοn that's any statement with an equal's sign. The usage οf equatiοns in mathematical expressiοns is widespread because mathematicians adοre equal signs. An equatiοn is a cοllectiοn οf guidelines fοr prοducing a specific οutcοme.

Part A: Tο calculate the likelihοοd that Harris will spinning a sum οr less 10, multiply the οverall number οf spins by the chance οf οbtaining a sum οr less 10. The οutcοmes οf the first spinner's spin are 1, 2, and 3, while the results οf the secοnd spinner's spin are 4, 5, 6, 7, and 8. Hence, the amοunts οr less 10 are:

1 + 4 = 5

1 + 5 = 6

1 + 6 = 7

1 + 7 = 8

1 + 8 = 9

2 + 4 = 6

2 + 5 = 7

2 + 6 = 8

2 + 7 = 9

3 + 4 = 7

3 + 5 = 8

3 + 6 = 9

There are 11 amοunts that cοuld be less than ten. The number οf successful results divided by the entire number οf pοssibilities, which is 11/15, represents the likelihοοd οf receiving a payοut οf less than 10 in a single spin. Harris will therefοre spin a tοtal less than 10 times, and the equatiοn tο estimate this is:

11/15 = x/500

After finding x, we οbtain:

x = (11/15) x 500

x = 366.67, which rοunds up tο 367

Sο, Harris shοuld expect tο spin a sum less than 10 abοut 367 times.

Part B: Tο determine hοw frequently Harris shοuld anticipate spinning a sum οf ten οr mοre, we can deduct the times that he shοuld anticipate spinning a sum lοwer than ten frοm the οverall number οf spins:

500 - 367 = 133

Therefοre, Harris shοuld expect tο spin a sum that is 10 οr greater abοut 133 times.

To know more about equation visit:

https://brainly.com/question/29538993

#SPJ1

Answer: (f⋅g)(1) = 10.

Step-by-step explanation:

To find (f⋅g)(x), we need to multiply the two functions f(x) and g(x) together. This can be done by multiplying each term of f(x) by each term of g(x), and then combining like terms. We get:

(f⋅g)(x) = f(x) * g(x)

= (-7x+3) * (3x^2 - 4x - 1)

= -21x^3 + 28x^2 + x - 3x^2 + 4x + 1

= -21x^3 + 25x^2 + 5x + 1

To find (f⋅g)(1), we can substitute x=1 into the expression for (f⋅g)(x):

(f⋅g)(1) = -21(1)^3 + 25(1)^2 + 5(1) + 1

= -21 + 25 + 5 + 1

= 10

Therefore, (f⋅g)(1) = 10.

Mathematicians divide the world of numbers into seven subsets, namely natural numbers, whole numbers, integers, rational numbers, irrational numbers, real numbers, and complex numbers.

Natural numbers: These are the counting numbers, starting from 1 and continuing indefinitely. They can also be denoted as "N" or "ℕ".

Whole numbers: These are the natural numbers, as well as zero. They can also be denoted as "W" or "ℤ⁺⁰".

Integers: These are the whole numbers, as well as their negative counterparts. They can also be denoted as "Z" or "ℤ".

Rational numbers: These are numbers that can be expressed as a fraction, where the numerator and denominator are integers (and the denominator is not zero). They can also be denoted as "Q" or "ℚ".

Irrational numbers: These are numbers that cannot be expressed as a fraction of two integers. They are often represented by decimal expansions that neither terminate nor repeat. Examples include π and the square root of 2.

Real numbers: These are all the rational and irrational numbers, taken together. They can also be thought of as numbers that can be located on a number line. They are often denoted as "R" or "ℝ".

Complex numbers: These are numbers of the form a + bi, where a and b are real numbers and i is the imaginary unit (defined as the square root of -1). Complex numbers can be added, subtracted, multiplied, and divided, just like real numbers. They are often denoted as "C" or "ℂ".

Learn more about numbers here

brainly.com/question/17267103

#SPJ4

Answer:Approximately

(0.58975,0.34781)

Step-by-step explanation:

If (x,y) is a point on the parabola, then the distance between (x,y) and (1,0) is:

√(x−1)2+(y−0)2=√x4+x2−2x+1

To minimize this, we want to minimize

f(x)=x4+x2−2x+1

The minimum will occur at a zero of:

f'(x)=4x3+2x−2=2(2x3+x−1)

graph{2x^3+x-1 [-10, 10, -5, 5]}

Using Cardano's method, find

x=3√14+√8736+3√14−√8736≅0.58975

y=x2≅0.34781

Dude he played for 1/2 of the game half of 60 is 30.

50%.

I'm I missing something?

In response to the stated question, we may state that As a result, the 66th derivative of f(x) = 4 sin(x) is 4 sin(x) (x).

In mathematics, the derivative of a function with real variables measures how sensitively the function's value varies in reaction to changes in its parameters. Derivatives are the fundamental tools of calculus. Differentiation (the rate of change of a function with respect to a variable in mathematics) (in mathematics, the rate of change of a function with respect to a variable). The use of derivatives is essential in the solution of calculus and differential equation problems. The definition of "derivative" or "taking a derivative" in calculus is finding the "slope" of a certain function. Because it is frequently the slope of a straight line, it should be enclosed in quotation marks. Derivatives are rate of change metrics that apply to almost any function.

Using the chain rule and the derivative of the sine function repeatedly yields the 66th derivative of the function [tex]f(x) = 4 sin (x).[/tex]

The derivative of sin(x) is cos(x), and the derivative of cos(x) is -sin(x), and this pattern repeats itself every two derivatives.

As a result, the first derivative of f(x) is:

[tex]f'(x) = 4 cos (x)[/tex]

The second derivative is as follows:

[tex]f"(x) = -4 sin (x)[/tex]

The third derivative is as follows:

[tex]f"'(x) = -4 cos (x)[/tex]

The fourth derivative is as follows:

[tex]f""(x) = 4 sin (x)[/tex]

And so forth.

[tex]f^{(66)(x)} = 4 sin (x)[/tex]

Because the pattern repeats every four derivatives, the 66th derivative is the same as the second, sixth, tenth, fourteenth, and so on.

As a result, the 66th derivative of f(x) = 4 sin(x) is 4 sin(x) (x).

To know more about derivatives visit:

https://brainly.com/question/25324584

#SPJ1

The congruence x + 13 ≡ 55 (mod 34) simplifies to x ≡ 12 (mod 34). There are three solutions for x less than 100 that satisfy this congruence.

The given congruence is x + 13 ≡ 55 (mod 34). Simplifying this, we get x ≡ 12 (mod 34).

We need to find the number of solutions for x that are less than 100 and satisfy this congruence.

The general solution for the congruence x ≡ 12 (mod 34) is x = 12 + 34k, where k is an integer.

The solutions that are less than 100 are obtained when k = 0, 1, or 2.

Thus, the number of solutions is 3.

Learn more about congruence here: brainly.com/question/7888063

#SPJ4

Answer:

Step-by-step explanation:

JOIN SHOBHIT NIRWAN NOW

The answer will of given mathematical logic will be T F T T F respectivelly.

A negation, conjunction, and disjunction are the fundamental mathematical logics. The symbols for negation, conjunction, and disjunction in mathematical logic are "," "," and "v," respectively.

Logical proofs frequently employ mathematical logic. Proofs are legitimate arguments that establish the veracity of mathematical assertions. A series of statements make up an argument. The conclusion is the last assertion, and the premises are all the statements that came before it (or hypothesis).

To know more about mathematical logic visit:-

brainly.com/question/28052598

#SPJ1

The complete truth table is shown in the below diagram.

≈ q → ≈ p: True  False  True  True

The contrapositive of a conditional statement is a new conditional statement that is formed by negating both the hypothesis (the "if" part) and the conclusion (the "then" part) of the original statement, and switching their positions. The truth table for the contrapositive of a conditional statement has the same number of rows as the truth table for the original statement.

For example, if the original statement is "If it is raining, then the ground is wet", then the contrapositive would be "If the ground is not wet, then it is not raining."

According to the given table the contrapositive of a conditional statement q and p is defines as;

True

False

True

True

To know more about conditional statement, visit:

https://brainly.com/question/27839142

#SPJ1

Answer:

D I believe

Step-by-step explanation: